summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-26USB: Add PID for Sierra 250U to drivers/usb/serial/sierra.caugust huber
Add VID/PID for Sierra Wireless 250U USB dongle to sierra.c Allows use of 3G radio only Signed-off-by: August Huber <gus@pbx.org> Cc: Elina Pasheva <epasheva@sierrawireless.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-26USB: option: add support for 1da5:4518Ömer Sezgin Ugurlu
Signed-off-by: Omer Sezgin Ugurlu <omer.ugurlu@a-kent.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-26drm/i915: add pipe A force quirks to i915 driverJesse Barnes
Ported over from the old UMS list. Unfortunately they're still necessary especially on older laptop platforms. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=22126. Tested-by: Xavier <shiningxc@gmail.com> Tested-by: Diego Escalante Urrelo <diegoe@gnome.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26drm/i915: Fix panel fitting regression since 734b4157Chris Wilson
The crtc mode fixup is run after the encoders adjust the mode to fit on their output, so don't reset the mode! Fixes: Bug 29057 - display corruption under 800x600 on netbook (1024x600) with 'Full Aspect' scaling https://bugs.freedesktop.org/show_bug.cgi?id=29057 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Xun Fang <xunx.fang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26serial: fix rs485 for atmel_serial on avr32Peter Huewe
This patch fixes a build failure [1-4] in the atmel_serial code introduced by patch the patch ARM: 6092/1: atmel_serial: support for RS485 communications (e8faff7330a3501eafc9bfe5f4f15af444be29f5) The build failure was caused by missing struct field and missing defines for the avr32 board - the patch fixes this. [1] http://kisskb.ellerman.id.au/kisskb/buildresult/2575242/ - first failure in linux-next, may 11th [2] http://kisskb.ellerman.id.au/kisskb/buildresult/2816418/ - still exists as of today [3] http://kisskb.ellerman.id.au/kisskb/buildresult/2617511/ - first failure in Linus' tree - May 20th - did really no one notice this?! [4] http://kisskb.ellerman.id.au/kisskb/buildresult/2813956/ - still exists in Linus' tree as of today Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-26ath9k: fix dma direction for map/unmap in ath_rx_taskletMing Lei
For edma, we should use DMA_BIDIRECTIONAL, or else use DMA_FROM_DEVICE. This is found to address "BUG at arch/x86/mm/physaddr.c:5" as described here: http://lkml.org/lkml/2010/7/14/21 Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26drm/i915: fix deadlock in fb teardownJesse Barnes
At module unload time we'll tear down the fbdev state. We do so under the struct mutex, so we shouldn't try to use the unlocked variant of the GEM object unreference function or we may deadlock. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26drm/i915: don't free non-existent compressed llb on ILK+Jesse Barnes
We should only free the compressed llb if we allocated it in the first place otherwise we'll panic at unload time. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26agp/intel: Use the correct mask to detect i830 aperture size.Tim Gardner
BugLink: https://bugs.launchpad.net/bugs/597075 commit f1befe71fa7a79ab733011b045639d8d809924ad introduced a regression when detecting aperture size of some i915 adapters, e.g., those on the Intel Q35 chipset. The original report: https://bugzilla.kernel.org/show_bug.cgi?id=15733 The regression report: https://bugzilla.kernel.org/show_bug.cgi?id=16294 According to the specification found at http://intellinuxgraphics.org/VOL_1_graphics_core.pdf, the PCI config space register I830_GMCH_CTRL is a mirror of GMCH Graphics Control. The correct macro for isolating the aperture size bits is therefore I830_GMCH_GMS_MASK along with the attendant changes to the case statement. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Kees Cook <kees.cook@canonical.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Eric Anholt <eric@anholt.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26drm/i915: disable FBC when more than one pipe is activeJesse Barnes
We're really supposed to do this to avoid trouble with underflows when multiple planes are active. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=26987. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: fangxun <xunx.fang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26drm/i915: Use the correct scanout alignment for fbcon.Chris Wilson
This fixes a potential modesetting error during boot with plymouth on Broadwater and Crestline introduced with 9df47c. The framebuffer was hard-coding an alignment of 64K, but the modesetting code required the documented alignment of 128K. The result was that we would attempt to unbind the pinned fbcon buffer, triggering an ERROR and ultimately failing the mode change. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26drm/i915: make sure eDP panel is turned onJesse Barnes
When enabling the eDP port, we need to make sure the panel is turned on after training the link. If we don't, it likely won't come back after suspend or may not come up at all. For unknown reasons, unlocking the panel regs before initiating a power on sequence is necessary. There are known bugs in the PCH panel sequencing logic, apparently this is one possible workaround. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28739. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: "Paulo J. S. Silva" <pjssilva@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26drm/i915: add PANEL_UNLOCK_REGS definitionJesse Barnes
In some cases, unlocking the panel regs is safe and can help us avoid a flickery, full mode set sequence. So define the unlock key and use it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26drm/i915: Make G4X-style PLL search more permissiveAdam Jackson
Fixes an Ironlake laptop with a 68.940MHz 1280x800 panel and 120MHz SSC reference clock. More generally, the 0.488% tolerance used before is just too tight to reliably find a PLL setting. I extracted the search algorithm and modified it to find the dot clocks with maximum error over the valid range for the given output type: http://people.freedesktop.org/~ajax/intel_g4x_find_best_pll.c This gave: Worst dotclock for Ironlake DAC refclk is 350000kHz (error 0.00571) Worst dotclock for Ironlake SL-LVDS refclk is 102321kHz (error 0.00524) Worst dotclock for Ironlake DL-LVDS refclk is 219642kHz (error 0.00488) Worst dotclock for Ironlake SL-LVDS SSC refclk is 84374kHz (error 0.00529) Worst dotclock for Ironlake DL-LVDS SSC refclk is 183035kHz (error 0.00488) Worst dotclock for G4X SDVO refclk is 267600kHz (error 0.00448) Worst dotclock for G4X HDMI refclk is 334400kHz (error 0.00478) Worst dotclock for G4X SL-LVDS refclk is 95571kHz (error 0.00449) Worst dotclock for G4X DL-LVDS refclk is 224000kHz (error 0.00510) Signed-off-by: Adam Jackson <ajax@redhat.com> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26MIPS: Set io_map_base for several PCI bridges lacking itBen Hutchings
Several MIPS platforms don't set pci_controller::io_map_base for their PCI bridges. This results in a panic in pci_iomap(). (The panic is conditional on CONFIG_PCI_DOMAINS, but that is now enabled for all PCI MIPS systems.) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: linux-mips@linux-mips.org Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: 584784@bugs.debian.org Patchwork: https://patchwork.linux-mips.org/patch/1377/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: Alchemy: Define eth platform devices in the correct orderWolfgang Grandegger
Currently, the eth devices are probed in the inverse order, first au1xxx_eth1_device and then au1xxx_eth0_device. On the GPR board, this makes trouble: # ifconfig|grep HWaddr eth0 Link encap:Ethernet HWaddr 00:50:C2:0C:30:01 eth1 Link encap:Ethernet HWaddr 66:22:01:80:38:10 A bogous ethernet hwaddr is assigned to the first device and au1xxx_eth0_device is mapped to eth1, which even does not work properly. With this patch, the problems are gone: # ifconfig|grep HWaddr eth0 Link encap:Ethernet HWaddr 66:22:11:32:38:10 eth1 Link encap:Ethernet HWaddr 66:22:11:32:38:11 Signed-off-by: Wolfgang Grandegger <wg@denx.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1473/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: BCM63xx: Prevent second enet registration on BCM6338Florian Fainelli
This SoC has only one ethernet MAC, so prevent registration of a second one. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1482/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations.David Daney
For 64-bit, we must use DADDU and DSUBU. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1483/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: N32: Define getdents64.Ralf Baechle
As a relativly new ABI N32 should only have received the getdents64(2) but instead it only had getdents(2). This was noticed as a performance anomaly in glibc. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: MTX-1: Fix PCI on the MeshCube and related boardsBruno Randolf
This patch fixes a regression introduced by commit "MIPS: Alchemy: MTX-1: Use linux gpio api." (bb706b28bbd647c2fd7f22d6bf03a18b9552be05) which broke PCI bus operation. The problem is caused by alchemy_gpio2_enable() which resets the GPIO2 block. Two PCI signals (PCI_SERR and PCI_RST) are connected to GPIO2 and they obviously do not to like the reset. Since GPIO2 is correctly initialized by the boot monitor (YAMON) it is not necessary to call this function, so just remove it. Also replace gpio_set_value() with alchemy_gpio_set_value() to avoid problems in case gpiolib gets initialized after PCI. And since alchemy gpio_set_value() calls au_sync() we don't have to au_sync() again later. Signed-off-by: Bruno Randolf <br1@einfach.org> To: linux-mips@linux-mips.org To: manuel.lauss@googlemail.com Patchwork: https://patchwork.linux-mips.org/patch/1448/ Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: Make init_vdso a subsys_initcall.David Daney
Quoting from Jiri Slaby's patch of a similar nature for x86: When initrd is in use and a driver does request_module() in its module_init (i.e. __initcall or device_initcall), a modprobe process is created with VDSO mapping. But VDSO is inited even in __initcall, i.e. on the same level (at the same time), so it may not be inited yet (link order matters). Move init_vdso up to subsys_initcall to avoid the issue. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Cc: Jiri Slaby <jslaby@suse.cz> Patchwork: http://patchwork.linux-mips.org/patch/1386/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: "Fix" useless 'init_vdso successfully' message.David Daney
In addition to being useless, it was mis-spelled. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: PowerTV: Move register setup to before reading registers.David VomLehn
The 4600 family code reads registers to differentiate between two ASIC variants, but this was being done prior to the register setup. This moves register setup before the reading code. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1392/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26SOUND: Au1000: Fix section mismatchRalf Baechle
WARNING: sound/soc/au1x/snd-soc-au1xpsc-i2s.o(.data+0xa8): Section mismatch in reference from the variable au1xpsc_i2s_driver to the function .init.text:au1xpsc_i2s_drvprobe() The variable au1xpsc_i2s_driver references the function __init au1xpsc_i2s_drvprobe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO: Au1100fb: Fix section mismatchRalf Baechle
WARNING: drivers/video/built-in.o(.data+0x360): Section mismatch in reference from the variable au1100fb_driver to the function .init.text:au1100fb_drv_probe() The variable au1100fb_driver references the function __init au1100fb_drv_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing which triggers of a slew of further mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_fix The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_fix. If au1100fb_fix is only used by au1100fb_drv_probe then annotate au1100fb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x21c): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_var The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_var. If au1100fb_var is only used by au1100fb_drv_probe then annotate au1100fb_var with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO: PMAGB-B: Fix section mismatchRalf Baechle
WARNING: drivers/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. Fixing this one triggers a few more mismatches in order: WARNING: drivers/video/built-in.o(.devinit.text+0x414): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_fix The function __devinit pmagbbfb_probe() references a variable __initdata pmagbbfb_fix. If pmagbbfb_fix is only used by pmagbbfb_probe then annotate pmagbbfb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x45c): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_defined The function __devinit pmagbbfb_probe() references a variable __initdata pmagbbfb_defined. If pmagbbfb_defined is only used by pmagbbfb_probe then annotate pmagbbfb_defined with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x5fc): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_screen_setup() The function __devinit pmagbbfb_probe() references a function __init pmagbbfb_screen_setup(). If pmagbbfb_screen_setup is only used by pmagbbfb_probe then annotate pmagbbfb_screen_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x6f4): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_osc_setup() The function __devinit pmagbbfb_probe() references a function __init pmagbbfb_osc_setup(). If pmagbbfb_osc_setup is only used by pmagbbfb_probe then annotate pmagbbfb_osc_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x5f8): Section mismatch in reference from the function pmagbbfb_osc_setup() to the variable .init.data:pmagbbfb_freqs.15993 The function __devinit pmagbbfb_osc_setup() references a variable __initdata pmagbbfb_freqs.15993. If pmagbbfb_freqs.15993 is only used by pmagbbfb_osc_setup then annotate pmagbbfb_freqs.15993 with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO: PMAG-BA: Fix section mismatchRalf Baechle
WARNING: drivers/video/built-in.o(.data+0x1e0): Section mismatch in reference fr om the variable pmagbafb_driver to the function .init.text:pmagbafb_probe() The variable pmagbafb_driver references the function __init pmagbafb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one triggers 2 more: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x108): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_defined The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_defined. If pmagbafb_defined is only used by pmagbafb_probe then annotate pmagbafb_defined with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26NET: declance: Fix section mismatchesRalf Baechle
WARNING: drivers/net/built-in.o(.data+0x24): Section mismatch in reference from the variable dec_lance_tc_driver to the function .init.text:dec_lance_tc_probe() The variable dec_lance_tc_driver references the function __init dec_lance_tc_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one results in a new mismatch: WARNING: drivers/net/built-in.o(.devinit.text+0x14): Section mismatch in reference from the function dec_lance_tc_probe() to the function .init.text:dec_lance_probe() The function __devinit dec_lance_tc_probe() references a function __init dec_lance_probe(). If dec_lance_probe is only used by dec_lance_tc_probe then annotate dec_lance_probe with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO. gbefb: Fix section mismatches.Ralf Baechle
WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26drm/i915: Clear any existing dither mode prior to enabling spatial ditheringChris Wilson
We cannot the initial configuration set by the BIOS not to have a dither mode enabled which conflicts with our enabling the Spatial Temporal 1 dither mode for PCH. In particular, the BIOS may either enable temporal dithering or the Spatial Temporal 2 with the result that we enable pure temporal dithering. Temporal dithering looks bad and is perceived as a flicker. Fixes: Bug 29248 - [Arrandale] Annoying flicker on internal panel, goes away after suspend to RAM https://bugs.freedesktop.org/show_bug.cgi?id=29248 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26drm/i915: handle shared framebuffers when flippingJesse Barnes
If a framebuffer is shared across CRTCs, the x,y position of one of them is likely to be something other than the origin (e.g. for extended desktop configs). So calculate the offset at flip time so such configurations can work. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28518. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Thomas M. <tmezzadra@gmail.com> Tested-by: fangxun <xunx.fang@intel.com> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.text ARM: 6263/1: ns9xxx: fix FTBFS for zImage ARM: 6262/1: arm/clps711x: fix debug macro compilation failure ARM: 6261/1: arm/shark: fix debug macro compilation failure ARM: 6260/1: arm/plat-spear: fix debug macro compilation failure ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failure ARM: 6258/1: arm/h720x: fix debug macro compilation failure ARM: 6233/1: Delete a wrong redundant right parenthesis ARM: 6230/1: fix nuc900 touchscreen clk definition bug [ARM] pxa: fix incorrect CONFIG_CPU_PXA27x to CONFIG_PXA27x [ARM] pxa/colibri-pxa300: fix AC97 init [ARM] pxa: fix incorrect order of AC97 reset pin configs [ARM] pxa: fix frequency scaling for pcmcia/pxa2xx_base [ARM] pxa: cpufreq-pxa2xx: fix DRI recomputation routine [ARM] pxa/corgi: fix MMC/SD card detection failure
2010-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: tpm_tis: fix subsequent suspend failures
2010-07-26Merge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Use kmalloc() instead of vmalloc() for KVM_[GS]ET_MSR KVM: MMU: fix conflict access permissions in direct sp
2010-07-26quiesce EDAC initialisation on desktop/mobile i7Daniel J Blueman
Don't print failure to detect Core i7 EDAC facilities to the console at boot time, most often occurring on Core i7 desktops and laptops. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM ACPI: create "processor.bm_check_disable" boot param ACPI: skip checking BM_STS if the BIOS doesn't ask for it ACPI: fix unused function warning ACPI: processor: fix processor_physically_present on UP ACPI video: fix string mismatch for Sony SR290 laptop ACPI battery: don't invoke power_supply_changed twice when battery is hot-added ACPI: handle systems which asynchoronously enable ACPI mode
2010-07-26Driver-core: Always create class directories for classses that support ↵Eric W. Biederman
namespaces. This fixes the regression in 2.6.35-rcX where bluetooth network devices would fail to be deleted from sysfs, causing their destruction and recreation to fail. In addition this fixes the mac80211_hwsim driver where it would leave around sysfs files when the driver was removed. This problem is discussed at https://bugzilla.kernel.org/show_bug.cgi?id=16257 The reason for the regression is that the network namespace support added to sysfs expects and requires that network devices be put in directories that can contain only network devices. Today get_device_parent almost provides that guarantee for all class devices, except for a specific exception when the parent of a class devices is a class device. It would be nice to simply remove that arguably incorrect special case, but apparently the input devices depend on it being there. So I have only removed it for class devices with network namespace support. Which today are the network devices. It has been suggested that a better fix would be to change the parent device from a class device to a bus device, which in the case of the bluetooth driver would change /sys/class/bluetooth to /sys/bus/bluetoth, I can not see how we would avoid significant userspace breakage if we were to make that change. Adding an extra directory in the path to the device will also be userspace visible but it is much less likely to break things. Everything is still accessible from /sys/class (for example), and it fixes two bugs. Adding an extra directory fixes a 3 year old regression introduced with the new sysfs layout that makes it impossible to rename bnep0 network devices to names that conflict with hci device attributes like hci_revsion. Adding an additional directory removes the new failure modes introduced by the network namespace code. If it weren't for the regession in the renaming of network devices I would figure out how to just make the sysfs code deal with this configuration of devices. In summary this patch fixes regressions by changing: "/sys/class/bluetooth/hci0/bnep0" to "/sys/class/bluetooth/hci0/net/bnep0". Reported-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26virtio: fix oops on OOMMichael S. Tsirkin
virtio ring was changed to return an error code on OOM, but one caller was missed and still checks for vq->vring.num. The fix is just to check for <0 error code. Long term it might make sense to change goto add_head to just return an error on oom instead, but let's apply a minimal fix for 2.6.35. Reported-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: Chris Mason <chris.mason@oracle.com> Cc: stable@kernel.org # .34.x Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26Input: RX51 keymap - fix recent compile breakageDmitry Torokhov
Commit 3fea60261e73 ("Input: twl40300-keypad - fix handling of "all ground" rows") broke compilation as I managed to use non-existent keycodes. Reported-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.textUwe Kleine-König
qnap_tsx1x_register_flash is only called by qnap_ts219_init and qnap_ts41x_init which both live in .init.text, too. So the move is OK. This fixes the following warning in kirkwood_defconfig: WARNING: vmlinux.o(.text+0x9334): Section mismatch in reference from the function qnap_tsx1x_register_flash() to the variable .init.data:qnap_tsx1x_spi_slave_info The function qnap_tsx1x_register_flash() references the variable __initdata qnap_tsx1x_spi_slave_info. This is often because qnap_tsx1x_register_flash lacks a __initdata annotation or the annotation of qnap_tsx1x_spi_slave_info is wrong. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6263/1: ns9xxx: fix FTBFS for zImageUwe Kleine-König
the different putc variants used an initialized local static variable which is broken since 5de813b (ARM: Eliminate decompressor -Dstatic= PIC hack) This needs to be initialized at runtime and so needs to be global. While at it give it a better name. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6262/1: arm/clps711x: fix debug macro compilation failureJeremy Kerr
We need mach/hardware.h for CLPS7111_VIRT_BASE. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6261/1: arm/shark: fix debug macro compilation failureJeremy Kerr
We need a waituart macro. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6260/1: arm/plat-spear: fix debug macro compilation failureJeremy Kerr
mov rx, =<immediate> isn't valid, use #<immediate> instead. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failureJeremy Kerr
We need asm/memory.h for NS9XXX_CSxSTAT_PHYS (via mach/memory.h). Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6258/1: arm/h720x: fix debug macro compilation failureJeremy Kerr
IO_BASE shoule be IO_VIRT, and IO_START should be IO_PHYS. We also need mach/hardware.h for these definitions. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26net: dev_forward_skb should call nf_resetBen Greear
With conn-track zones and probably with different network namespaces, the netfilter logic needs to be re-calculated on packet receive. If the netfilter logic is not reset, it will not be recalculated properly. This patch adds the nf_reset logic to dev_forward_skb. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26tpm_tis: fix subsequent suspend failuresRajiv Andrade
Fix subsequent suspends by issuing tpm_continue_selftest during resume. Otherwise, the tpm chip seems to be not fully initialized and will reject the save state command during suspend, thus preventing the whole system to suspend. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16256 Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: James Morris <jmorris@namei.org> Cc: Debora Velarde <debora@linux.vnet.ibm.com> Cc: David Safford <safford@watson.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org>
2010-07-25net sched: fix race in mirred device removalstephen hemminger
This fixes hang when target device of mirred packet classifier action is removed. If a mirror or redirection action is configured to cause packets to go to another device, the classifier holds a ref count, but was assuming the adminstrator cleaned up all redirections before removing. The fix is to add a notifier and cleanup during unregister. The new list is implicitly protected by RTNL mutex because it is held during filter add/delete as well as notifier. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25Merge branch 'wimax-2.6.35.y' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
generated by cgit v0.10.2 at 2024-08-21 05:31:04 (GMT)