summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-21can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock()Wei Yongjun
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Cc: stable <stable@vger.kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: usb: peak: rename peak_usb dump_mem functionRandy Dunlap
Rename generic-sounding function dump_mem() to pcan_dump_mem() so that it does not conflict with the dump_mem() function in arch/sh/include/asm/kdebug.h. drivers/net/can/usb/peak_usb/pcan_usb_core.c: error: conflicting types for 'dump_mem': => 56:6 drivers/net/can/usb/peak_usb/pcan_usb_core.h: error: conflicting types for 'dump_mem': => 134:6 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> [mkl: convert all users of dump_mem(), too] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: c_can: Adopt pinctrl supportAnilKumar Ch
Adopt pinctrl support to c_can driver based on c_can device pointer, pinctrl driver configure SoC pins to d_can mode according to definitions provided in .dts file. In device specific device tree file 'pinctrl-names = "default";' and 'pinctrl-0 = <&d_can1_pins>;' needs to add to configure pins from c_can driver. d_can1_pins node contains the pinmux/config details of d_can L/H pins. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: c_can: Add d_can suspend resume supportAnilKumar Ch
Adds suspend resume support to DCAN driver which enables DCAN power down mode bit (PDR). Then DCAN will ack the local power-down mode by setting PDA bit in STATUS register. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controllerAnilKumar Ch
Add Runtime PM support to C_CAN/D_CAN controller. The runtime PM APIs control clocks for C_CAN/D_CAN IP and prevent access to the register of C_CAN/D_CAN IP when clock is turned off. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: c_can: Add device tree support to Bosch C_CAN/D_CAN controllerAnilKumar Ch
Add device tree support to C_CAN/D_CAN controller and usage details are added to device tree documentation. Driver was tested on AM335x EVM. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> For the of binding doc: Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: c_can: Modify c_can device namesAnilKumar Ch
Modify c_can device names from *_CAN_DEVTYPE to BOSCH_*_CAN to make use of same names for array indexes in c_can_id_table[] as well as device names. This patch also add indexes to c_can_id_table array. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21netfilter: ipset: Check and reject crazy /0 input parametersJozsef Kadlecsik
bitmap:ip and bitmap:ip,mac type did not reject such a crazy range when created and using such a set results in a kernel crash. The hash types just silently ignored such parameters. Reject invalid /0 input parameters explicitely. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2012-09-21netfilter: ipset: Fix sparse warnings "incorrect type in assignment"Jozsef Kadlecsik
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2012-09-21netlink: use <linux/export.h> instead of <linux/module.h>Pablo Neira Ayuso
Since (9f00d97 netlink: hide struct module parameter in netlink_kernel_create), linux/netlink.h includes linux/module.h because of the use of THIS_MODULE. Use linux/export.h instead, as suggested by Stephen Rothwell, which is significantly smaller and defines THIS_MODULES. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21sunbmac: Remove unused local variable.David S. Miller
Commit eb716c54b1c71ad28ab20461bff831bd481066c4 ("sunbmac: remove unnecessary setting of skb->dev") caused the local varible 'dev' in bigmac_init_rings to become unused. And now the compiler warns about it. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21team: send port changed when addedJiri Pirko
On some hw, link is not up during adding iface to team. That causes event not being sent to userspace and that may cause confusion. Fix this bug by sending port changed event once it's added to team. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21ipconfig: add nameserver IPs to kernel-parameter ip=Christoph Fritz
On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200Bjørn Mork
One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21l2tp: fix compile error when CONFIG_IPV6=m and CONFIG_L2TP=yAmerigo Wang
When CONFIG_IPV6=m and CONFIG_L2TP=y, I got the following compile error: LD init/built-in.o net/built-in.o: In function `l2tp_xmit_core': l2tp_core.c:(.text+0x147781): undefined reference to `inet6_csk_xmit' net/built-in.o: In function `l2tp_tunnel_create': (.text+0x149067): undefined reference to `udpv6_encap_enable' net/built-in.o: In function `l2tp_ip6_recvmsg': l2tp_ip6.c:(.text+0x14e991): undefined reference to `ipv6_recv_error' net/built-in.o: In function `l2tp_ip6_sendmsg': l2tp_ip6.c:(.text+0x14ec64): undefined reference to `fl6_sock_lookup' l2tp_ip6.c:(.text+0x14ed6b): undefined reference to `datagram_send_ctl' l2tp_ip6.c:(.text+0x14eda0): undefined reference to `fl6_sock_lookup' l2tp_ip6.c:(.text+0x14ede5): undefined reference to `fl6_merge_options' l2tp_ip6.c:(.text+0x14edf4): undefined reference to `ipv6_fixup_options' l2tp_ip6.c:(.text+0x14ee5d): undefined reference to `fl6_update_dst' l2tp_ip6.c:(.text+0x14eea3): undefined reference to `ip6_dst_lookup_flow' l2tp_ip6.c:(.text+0x14eee7): undefined reference to `ip6_dst_hoplimit' l2tp_ip6.c:(.text+0x14ef8b): undefined reference to `ip6_append_data' l2tp_ip6.c:(.text+0x14ef9d): undefined reference to `ip6_flush_pending_frames' l2tp_ip6.c:(.text+0x14efe2): undefined reference to `ip6_push_pending_frames' net/built-in.o: In function `l2tp_ip6_destroy_sock': l2tp_ip6.c:(.text+0x14f090): undefined reference to `ip6_flush_pending_frames' l2tp_ip6.c:(.text+0x14f0a0): undefined reference to `inet6_destroy_sock' net/built-in.o: In function `l2tp_ip6_connect': l2tp_ip6.c:(.text+0x14f14d): undefined reference to `ip6_datagram_connect' net/built-in.o: In function `l2tp_ip6_bind': l2tp_ip6.c:(.text+0x14f4fe): undefined reference to `ipv6_chk_addr' net/built-in.o: In function `l2tp_ip6_init': l2tp_ip6.c:(.init.text+0x73fa): undefined reference to `inet6_add_protocol' l2tp_ip6.c:(.init.text+0x740c): undefined reference to `inet6_register_protosw' net/built-in.o: In function `l2tp_ip6_exit': l2tp_ip6.c:(.exit.text+0x1954): undefined reference to `inet6_unregister_protosw' l2tp_ip6.c:(.exit.text+0x1965): undefined reference to `inet6_del_protocol' net/built-in.o:(.rodata+0xf2d0): undefined reference to `inet6_release' net/built-in.o:(.rodata+0xf2d8): undefined reference to `inet6_bind' net/built-in.o:(.rodata+0xf308): undefined reference to `inet6_ioctl' net/built-in.o:(.data+0x1af40): undefined reference to `ipv6_setsockopt' net/built-in.o:(.data+0x1af48): undefined reference to `ipv6_getsockopt' net/built-in.o:(.data+0x1af50): undefined reference to `compat_ipv6_setsockopt' net/built-in.o:(.data+0x1af58): undefined reference to `compat_ipv6_getsockopt' make: *** [vmlinux] Error 1 This is due to l2tp uses symbols from IPV6, so when IPV6 is a module, l2tp is not allowed to be builtin. Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21netfilter: combine ipt_REDIRECT and ip6t_REDIRECTJan Engelhardt
Combine more modules since the actual code is so small anyway that the kmod metadata and the module in its loaded state totally outweighs the combined actual code size. IP_NF_TARGET_REDIRECT becomes a compat option; IP6_NF_TARGET_REDIRECT is completely eliminated since it has not see a release yet. Signed-off-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-09-21netfilter: combine ipt_NETMAP and ip6t_NETMAPJan Engelhardt
Combine more modules since the actual code is so small anyway that the kmod metadata and the module in its loaded state totally outweighs the combined actual code size. IP_NF_TARGET_NETMAP becomes a compat option; IP6_NF_TARGET_NETMAP is completely eliminated since it has not see a release yet. Signed-off-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-09-21netfilter: nf_nat: remove obsolete rcu_read_unlock callUlrich Weber
hlist walk in find_appropriate_src() is not protected anymore by rcu_read_lock(), so rcu_read_unlock() is unnecessary if in_range() matches. This bug was added in (c7232c9 netfilter: add protocol independent NAT core). Signed-off-by: Ulrich Weber <ulrich.weber@sophos.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-09-21netfilter: nf_nat: fix oops when unloading protocol modulesPatrick McHardy
When unloading a protocol module nf_ct_iterate_cleanup() is used to remove all conntracks using the protocol from the bysource hash and clean their NAT sections. Since the conntrack isn't actually killed, the NAT callback is invoked twice, once for each direction, which causes an oops when trying to delete it from the bysource hash for the second time. The same oops can also happen when removing both an L3 and L4 protocol since the cleanup function doesn't check whether the conntrack has already been cleaned up. Pid: 4052, comm: modprobe Not tainted 3.6.0-rc3-test-nat-unload-fix+ #32 Red Hat KVM RIP: 0010:[<ffffffffa002c303>] [<ffffffffa002c303>] nf_nat_proto_clean+0x73/0xd0 [nf_nat] RSP: 0018:ffff88007808fe18 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800728550c0 RCX: ffff8800756288b0 RDX: dead000000200200 RSI: ffff88007808fe88 RDI: ffffffffa002f208 RBP: ffff88007808fe28 R08: ffff88007808e000 R09: 0000000000000000 R10: dead000000200200 R11: dead000000100100 R12: ffffffff81c6dc00 R13: ffff8800787582b8 R14: ffff880078758278 R15: ffff88007808fe88 FS: 00007f515985d700(0000) GS:ffff88007cd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f515986a000 CR3: 000000007867a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 4052, threadinfo ffff88007808e000, task ffff8800756288b0) Stack: ffff88007808fe68 ffffffffa002c290 ffff88007808fe78 ffffffff815614e3 ffffffff00000000 00000aeb00000246 ffff88007808fe68 ffffffff81c6dc00 ffff88007808fe88 ffffffffa00358a0 0000000000000000 000000000040f5b0 Call Trace: [<ffffffffa002c290>] ? nf_nat_net_exit+0x50/0x50 [nf_nat] [<ffffffff815614e3>] nf_ct_iterate_cleanup+0xc3/0x170 [<ffffffffa002c55a>] nf_nat_l3proto_unregister+0x8a/0x100 [nf_nat] [<ffffffff812a0303>] ? compat_prepare_timeout+0x13/0xb0 [<ffffffffa0035848>] nf_nat_l3proto_ipv4_exit+0x10/0x23 [nf_nat_ipv4] ... To fix this, - check whether the conntrack has already been cleaned up in nf_nat_proto_clean - change nf_ct_iterate_cleanup() to only invoke the callback function once for each conntrack (IP_CT_DIR_ORIGINAL). The second change doesn't affect other callers since when conntracks are actually killed, both directions are removed from the hash immediately and the callback is already only invoked once. If it is not killed, the second callback invocation will always return the same decision not to kill it. Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-09-21netfilter: fix IPv6 NAT dependencies in KconfigPablo Neira Ayuso
* NF_NAT_IPV6 requires IP6_NF_IPTABLES * IP6_NF_TARGET_MASQUERADE, IP6_NF_TARGET_NETMAP, IP6_NF_TARGET_REDIRECT and IP6_NF_TARGET_NPT require NF_NAT_IPV6. This change just mirrors what IPv4 does in Kconfig, for consistency. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-09-21Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to igb and ixgbevf. v2: updated patch description in 04 patch (ixgbevf: scheduling while atomic in reset hw path) ... Akeem G. Abodunrin (1): igb: Support to enable EEE on all eee_supported devices Alexander Duyck (2): igb: Remove artificial restriction on RQDPC stat reading ixgbevf: Add support for VF API negotiation John Fastabend (1): ixgbevf: scheduling while atomic in reset hw path ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21net1080: Neaten netdev_dbg useJoe Perches
Remove unnecessary temporary variable and #ifdef DEBUG block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20USB: remove dbg() usage in USB networking driversGreg Kroah-Hartman
The dbg() USB macro is so old, it predates me. The USB networking drivers are the last hold-out using this macro, and we want to get rid of it, so replace the usage of it with the proper netdev_dbg() or dev_dbg() (depending on the context) calls. Some places we end up using a local variable for the debug call, so also convert the other existing dev_* calls to use it as well, to save tiny amounts of code space. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20tcp: Document use of undefined variable.Alan Cox
Both tcp_timewait_state_process and tcp_check_req use the same basic construct of struct tcp_options received tmp_opt; tmp_opt.saw_tstamp = 0; then call tcp_parse_options However if they are fed a frame containing a TCP_SACK then tbe code behaviour is undefined because opt_rx->sack_ok is undefined data. This ought to be documented if it is intentional. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20ipv4: Don't add TCP-code in inet_sock_destructChristoph Paasch
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Acked-by: H.K. Jerry Chu <hkchu@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20IB/ipoib: Add rtnl_link_ops supportOr Gerlitz
Add rtnl_link_ops to IPoIB, with the first usage being child device create/delete through them. Childs devices are now either legacy ones, created/deleted through the ipoib sysfs entries, or RTNL ones. Adding support for RTNL childs involved refactoring of ipoib_vlan_add which is now used by both the sysfs and the link_ops code. Also, added ndo_uninit entry to support calling unregister_netdevice_queue from the rtnl dellink entry. This required removal of calls to ipoib_dev_cleanup from the driver in flows which use unregister_netdevice, since the networking core will invoke ipoib_uninit which does exactly that. Signed-off-by: Erez Shitrit <erezsh@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next Ben Hutchings says: ==================== 1. Extension to PPS/PTP to allow for PHC devices where pulses are subject to a variable but measurable delay. 2. PPS/PTP/PHC support for Solarflare boards with a timestamping peripheral. 3. MTD support for updating the timestamping peripheral on those boards. 4. Fix for potential over-length requests to firmware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20ixgbevf: scheduling while atomic in reset hw pathJohn Fastabend
In ixgbevf_reset_hw_vf() msleep is called while holding mbx_lock resulting in a schedule while atomic bug with trace below. This patch uses mdelay instead. BUG: scheduling while atomic: ip/6539/0x00000002 2 locks held by ip/6539: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81419cc3>] rtnl_lock+0x17/0x19 #1: (&(&adapter->mbx_lock)->rlock){+.+...}, at: [<ffffffffa0030855>] ixgbevf_reset+0x30/0xc1 [ixgbevf] Modules linked in: ixgbevf ixgbe mdio libfc scsi_transport_fc 8021q scsi_tgt garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf ipv6 uinput igb coretemp hwmon crc32c_intel ioatdma i2c_i801 shpchp microcode lpc_ich mfd_core i2c_core joydev dca pcspkr serio_raw pata_acpi ata_generic usb_storage pata_jmicron Pid: 6539, comm: ip Not tainted 3.6.0-rc3jk-net-next+ #104 Call Trace: [<ffffffff81072202>] __schedule_bug+0x6a/0x79 [<ffffffff814bc7e0>] __schedule+0xa2/0x684 [<ffffffff8108f85f>] ? trace_hardirqs_off+0xd/0xf [<ffffffff814bd0c0>] schedule+0x64/0x66 [<ffffffff814bb5e2>] schedule_timeout+0xa6/0xca [<ffffffff810536b9>] ? lock_timer_base+0x52/0x52 [<ffffffff812629e0>] ? __udelay+0x15/0x17 [<ffffffff814bb624>] schedule_timeout_uninterruptible+0x1e/0x20 [<ffffffff810541c0>] msleep+0x1b/0x22 [<ffffffffa002e723>] ixgbevf_reset_hw_vf+0x90/0xe5 [ixgbevf] [<ffffffffa0030860>] ixgbevf_reset+0x3b/0xc1 [ixgbevf] [<ffffffffa0032fba>] ixgbevf_open+0x43/0x43e [ixgbevf] [<ffffffff81409610>] ? dev_set_rx_mode+0x2e/0x33 [<ffffffff8140b0f1>] __dev_open+0xa0/0xe5 [<ffffffff814097ed>] __dev_change_flags+0xbe/0x142 [<ffffffff8140b01c>] dev_change_flags+0x21/0x56 [<ffffffff8141a843>] do_setlink+0x2e2/0x7f4 [<ffffffff81016e36>] ? native_sched_clock+0x37/0x39 [<ffffffff8141b0ac>] rtnl_newlink+0x277/0x4bb [<ffffffff8141aee9>] ? rtnl_newlink+0xb4/0x4bb [<ffffffff812217d1>] ? selinux_capable+0x32/0x3a [<ffffffff8104fb17>] ? ns_capable+0x4f/0x67 [<ffffffff81419cc3>] ? rtnl_lock+0x17/0x19 [<ffffffff81419f28>] rtnetlink_rcv_msg+0x236/0x253 [<ffffffff81419cf2>] ? rtnetlink_rcv+0x2d/0x2d [<ffffffff8142fd42>] netlink_rcv_skb+0x43/0x94 [<ffffffff81419ceb>] rtnetlink_rcv+0x26/0x2d [<ffffffff8142faf1>] netlink_unicast+0xee/0x174 [<ffffffff81430327>] netlink_sendmsg+0x26a/0x288 [<ffffffff813fb04f>] ? rcu_read_unlock+0x56/0x67 [<ffffffff813f5e6d>] __sock_sendmsg_nosec+0x58/0x61 [<ffffffff813f81b7>] __sock_sendmsg+0x3d/0x48 [<ffffffff813f8339>] sock_sendmsg+0x6e/0x87 [<ffffffff81107c9f>] ? might_fault+0xa5/0xac [<ffffffff81402a72>] ? copy_from_user+0x2a/0x2c [<ffffffff81402e62>] ? verify_iovec+0x54/0xaa [<ffffffff813f9834>] __sys_sendmsg+0x206/0x288 [<ffffffff810694fa>] ? up_read+0x23/0x3d [<ffffffff811307e5>] ? fcheck_files+0xac/0xea [<ffffffff8113095e>] ? fget_light+0x3a/0xb9 [<ffffffff813f9a2e>] sys_sendmsg+0x42/0x60 [<ffffffff814c5ba9>] system_call_fastpath+0x16/0x1b CC: Eric Dumazet <edumazet@google.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-By: Robert Garrett <robertx.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-20ixgbevf: Add support for VF API negotiationAlexander Duyck
This change makes it so that the VF can support the PF/VF API negotiation protocol. Specifically in this case we are adding support for API 1.0 which will mean that the VF is capable of cleaning up buffers that span multiple descriptors without triggering an error. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-20igb: Support to enable EEE on all eee_supported devicesAkeem G. Abodunrin
Current implementation enables EEE on only i350 device. This patch enables EEE on all eee_supported devices. Also, configured LPI clock to keep running before EEE is enabled on i210 and i211 devices. Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-20igb: Remove artificial restriction on RQDPC stat readingAlexander Duyck
For some reason the reading of the RQDPC register was being artificially limited to 4K. Instead of limiting the value we should read the value and add the full amount. Otherwise this can lead to a misleading number of dropped packets when the actual value is in fact much higher. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-19r8169: use unlimited DMA burst for TXMichal Schmidt
The r8169 driver currently limits the DMA burst for TX to 1024 bytes. I have a box where this prevents the interface from using the gigabit line to its full potential. This patch solves the problem by setting TX_DMA_BURST to unlimited. The box has an ASRock B75M motherboard with on-board RTL8168evl/8111evl (XID 0c900880). TSO is enabled. I used netperf (TCP_STREAM test) to measure the dependency of TX throughput on MTU. I did it for three different values of TX_DMA_BURST ('5'=512, '6'=1024, '7'=unlimited). This chart shows the results: http://michich.fedorapeople.org/r8169/r8169-effects-of-TX_DMA_BURST.png Interesting points: - With the current DMA burst limit (1024): - at the default MTU=1500 I get only 842 Mbit/s. - when going from small MTU, the performance rises monotonically with increasing MTU only up to a peak at MTU=1076 (908 MBit/s). Then there's a sudden drop to 762 MBit/s from which the throughput rises monotonically again with further MTU increases. - With a smaller DMA burst limit (512): - there's a similar peak at MTU=1076 and another one at MTU=564. - With unlimited DMA burst: - at the default MTU=1500 I get nice 940 Mbit/s. - the throughput rises monotonically with increasing MTU with no strange peaks. Notice that the peaks occur at MTU sizes that are multiples of the DMA burst limit plus 52. Why 52? Because: 20 (IP header) + 20 (TCP header) + 12 (TCP options) = 52 The Realtek-provided r8168 driver (v8.032.00) uses unlimited TX DMA burst too, except for CFG_METHOD_1 where the TX DMA burst is set to 512 bytes. CFG_METHOD_1 appears to be the oldest MAC version of "RTL8168B/8111B", i.e. RTL_GIGA_MAC_VER_11 in r8169. Not sure if this MAC version really needs the smaller burst limit, or if any other versions have similar requirements. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19ipv6: unify fragment thresh handling codeAmerigo Wang
Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19ipv6: make ip6_frag_nqueues() and ip6_frag_mem() static inlineAmerigo Wang
Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19ipv6: unify conntrack reassembly expire code with standard oneAmerigo Wang
Two years ago, Shan Wei tried to fix this: http://patchwork.ozlabs.org/patch/43905/ The problem is that RFC2460 requires an ICMP Time Exceeded -- Fragment Reassembly Time Exceeded message should be sent to the source of that fragment, if the defragmentation times out. " If insufficient fragments are received to complete reassembly of a packet within 60 seconds of the reception of the first-arriving fragment of that packet, reassembly of that packet must be abandoned and all the fragments that have been received for that packet must be discarded. If the first fragment (i.e., the one with a Fragment Offset of zero) has been received, an ICMP Time Exceeded -- Fragment Reassembly Time Exceeded message should be sent to the source of that fragment. " As Herbert suggested, we could actually use the standard IPv6 reassembly code which follows RFC2460. With this patch applied, I can see ICMP Time Exceeded sent from the receiver when the sender sent out 3/4 fragmented IPv6 UDP packet. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: netfilter-devel@vger.kernel.org Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19ipv6: add a new namespace for nf_conntrack_reasmAmerigo Wang
As pointed by Michal, it is necessary to add a new namespace for nf_conntrack_reasm code, this prepares for the second patch. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: netfilter-devel@vger.kernel.org Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19netpoll: call ->ndo_select_queue() in tx pathAmerigo Wang
In netpoll tx path, we miss the chance of calling ->ndo_select_queue(), thus could cause problems when bonding is involved. This patch makes dev_pick_tx() extern (and rename it to netdev_pick_tx()) to let netpoll call it in netpoll_send_skb_on_dev(). Reported-by: Sylvain Munaut <s.munaut@whatever-company.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Tested-by: Sylvain Munaut <s.munaut@whatever-company.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19netdev: make address const in device address managementstephen hemminger
The internal functions for add/deleting addresses don't change their argument. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19i825xx: znet: fix compiler warnings when building a 64-bit kernelMika Westerberg
When building 64-bit kernel with this driver we get following warnings from the compiler: drivers/net/ethernet/i825xx/znet.c: In function ‘hardware_init’: drivers/net/ethernet/i825xx/znet.c:863:29: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/net/ethernet/i825xx/znet.c:870:29: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Fix these by calling isa_virt_to_bus() before passing the pointers to set_dma_addr(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19gre: add GSO supportEric Dumazet
Add GSO support to GRE tunnels. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19net: provide a default dev->ethtool_opsEric Dumazet
Instead of forcing device drivers to provide empty ethtool_ops or tweak net/core/ethtool.c again, we could provide a generic ethtool_ops. This occurred to me when I wanted to add GSO support to GRE tunnels. ethtool -k support should be generic for all drivers. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Maciej Żenczykowski <maze@google.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19net: dev: fix incorrect getting net device's nameGao feng
When moving a nic from net namespace A to net namespace B, in dev_change_net_namesapce,we call __dev_get_by_name to decide if the netns B has the device has the same name. if the netns B already has the same named device,we call dev_get_valid_name to try to get a valid name for this nic in the netns B,but net_device->nd_net still point to netns A now. this patch fix it. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19ipv6: recursive check rt->dst.from when call rt6_check_expiredLi RongQing
If dst cache dst_a copies from dst_b, and dst_b copies from dst_c, check if dst_a is expired or not, we should not end with dst_a->dst.from, dst_b, we should check dst_c. CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19net: more accurate network taps in transmit pathEric Dumazet
dev_queue_xmit_nit() should be called right before ndo_start_xmit() calls or we might give wrong packet contents to taps users : Packet checksum can be changed, or packet can be linearized or segmented, and segments partially sent for the later case. Also a memory allocation can fail and packet never really hit the driver entry point. Reported-by: Jamie Gloudon <jamie.gloudon@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19sfc: Avoid generating over-length MC_CMD_FLUSH_RX_QUEUES requestBen Hutchings
MCDI supports requests up to 252 bytes long, which is only enough to pass 63 RX queue IDs to MC_CMD_FLUSH_RX_QUEUES. However a VF may have up to 64 RX queues, and if we try to flush them all we will generate an over-length request and BUG() in efx_mcdi_copyin(). Currently all VF drivers limit themselves to 32 RX queues, so reducing the limit to 63 does no harm. Also add a BUILD_BUG_ON in efx_mcdi_flush_rxqs() so we remember to deal with the same problem there if EFX_MAX_CHANNELS is increased. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Bump version to 3.2Ben Hutchings
The key new feature for 3.2 is PTP support. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Expose FPGA bitfile partition through MTDBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Support variable-length response to MCDI GET_BOARD_CFGBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Convert firmware subtypes to native byte order in efx_mcdi_get_board_cfg()Ben Hutchings
On big-endian systems the MTD partition names currently have mangled subtype numbers and are not recognised by the firmware update tool (sfupdate). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Add support for IEEE-1588 PTPStuart Hodgson
Add PTP IEEE-1588 support and make accesible via the PHC subsystem. This work is based on prior code by Andrew Jackson Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com> [bwh: - Add byte order conversion in efx_ptp_send_times() - Simplify conversion of PPS event times - Add the built-in vs module check to CONFIG_SFC_PTP dependencies] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
generated by cgit v0.10.2 at 2024-10-28 02:13:23 (GMT)