summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-06-08Bluetooth: Add BT_POWER L2CAP socket option.Jaikumar Ganesh
Add BT_POWER socket option used to control the power characteristics of the underlying ACL link. When the remote end has put the link in sniff mode and the host stack wants to send data we need need to explicitly exit sniff mode to work well with certain devices (For example, A2DP on Plantronics Voyager 855). However, this causes problems with HID devices. Hence, moving into active mode when sending data, irrespective of who set the sniff mode has been made as a socket option. By default, we will move into active mode. HID devices can set the L2CAP socket option to prevent this from happening. Currently, this has been implemented for L2CAP sockets. This has been tested with incoming and outgoing L2CAP sockets for HID and A2DP. Based on discussions on linux-bluetooth and patches submitted by Andrei Emeltchenko. Signed-off-by: Jaikumar Ganesh <jaikumar@google.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Verify a pin code in pin_code_replyWaldemar Rymarkiewicz
As we cannot relay on a userspace mgmt api implementation we should verify if pin_code_reply in fact contains the secure pin code. If userspace replied with unsecure pincode when secure was required we will send pin_code_neg_reply to the controller. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove a magic numberWaldemar Rymarkiewicz
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: fix sparse & gcc warningsJohannes Berg
sparse complains about a few things that should be static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Set 'peer_addr_type' in hci_le_connect()Andre Guedes
Set the 'peer_addr_type' field of the LE Create Connection command sent in hci_le_connect(). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Check advertising cache in hci_connect()Andre Guedes
When connecting to a LE device, we need to check the advertising cache in order to know the address type of that device. If its advertising entry is not found, the connection is not established and hci_connect() returns error. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove useless check in hci_connect()Andre Guedes
There is no need to check the connection's state since hci_conn_add() has just created a new connection and its state has been set properly. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add 'dst_type' field to struct hci_connAndre Guedes
This patch adds a new field (dst_type) to the struct hci_conn which holds the type of the destination address (bdaddr_t dst). This approach is needed in order to use the struct hci_conn as an abstraction of LE connections in HCI Layer. For non-LE this field is ignored. This patch also set properly the 'dst_type' field after initializing LE hci_conn structures. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Refactor hci_auth_complete_evt functionWaldemar Rymarkiewicz
Replace if(conn) with if(!conn) checking to avoid too many nested statements Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Fix auth_complete_evt for legacy unitsWaldemar Rymarkiewicz
Legacy devices don't re-authenticate the link properly if a link key already exists. Thus, don't update sec_level for this case even if hci_auth_complete_evt indicates success. Otherwise the sec_level will not reflect a real security on the link. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Advertising entries lifetimeAndre Guedes
This patch adds a timer to clear 'adv_entries' after three minutes. After some amount of time, the advertising entries cached during the last LE scan should be considered expired and they should be removed from the advertising cache. It was chosen a three minutes timeout as an initial attempt. This value might change in future. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Clear advertising cache before scanningAndre Guedes
The LE advertising cache should be cleared before performing a LE scanning. This will force the cache to contain only fresh advertising entries. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add Advertising Report Meta Event handlerAndre Guedes
This patch adds a function to handle LE Advertising Report Meta Events. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: LE advertising cacheAndre Guedes
This patch implements the LE advertising cache. It stores sensitive information (bdaddr and bdaddr_type so far) gathered from LE advertising report events. Only advertising entries from connectables devices are added to the cache. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add advertising report meta event structsAnderson Briglia
This patch adds definitions and a new struct for Advertising Report Event from LE and Dual Mode controllers. Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Rename __l2cap_chan_close() to l2cap_chan_close()Gustavo F. Padovan
To make it consistent with the rest of the API. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove export of l2cap_chan_clear_timer()Gustavo F. Padovan
The call to l2cap_chan_clear_timer() is not really needed in l2cap_sock.c. This patch also adds a call to l2cap_chan_clear_timer() to the only place in __l2cap_sock_close() that wasn't calling it. It's safe call it there because l2cap_chan_clear_timer() check first for timer_peding(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: create channel timer to replace sk_timerGustavo F. Padovan
The new timer does not belong to struct sock, tought it still touch some sock things, but this will be sorted out soon. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add chan->chan_type struct memberGustavo F. Padovan
chan_type says if our chan is raw(direclty access to HCI), connection less or connection oriented. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Create l2cap_chan_send()Gustavo F. Padovan
This move all the sending logic to l2cap_core.c, but we still have a socket dependence there, struct msghdr. It will be removed in some of the further commits. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Create __l2cap_chan_close()Gustavo F. Padovan
This is actually __l2cap_sock_close() renamed to __l2cap_chan_close(). At a first look it may not make sense, but with the further cleanups that will come it will. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove unnecessary use of hci_dev_list_lockJohan Hedberg
The get_connections function has no need to use hci_dev_list_lock. The code was there probably because of a copy-paste mistake. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Kill set but not used variable 'l2cap_sk' in ↵David Miller
rfcomm_sock_getsockopt_old() Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: fix set but not used warningGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Allow unsegmented SDU retries on sock_queue_rcv_skb failureRuiyi Zhang
In L2CAP_SDU_UNSEGMENTED case, if sock_queue_rcv_skb returns error, l2cap_ertm_reassembly_sdu should not return 0 so as to insert the skb into BUSY_QUEUE for later retries. Signed-off-by: Ruiyi Zhang <Ruiyi.Zhang@Atheros.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-07ath9k: make use of a helper to get paprd scale factorMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mwifiex: disable transmission buffer aggregation for AMSDU packetsYogesh Ashok Powar
Padding per MSDU will affect the length of next packet and hence the exact length of next packet is uncertain here. Also, aggregation of transmission buffer, while downloading the data to the card, wont gain much on the AMSDU packets as the AMSDU packets utilizes the transmission buffer space to the maximum (adapter->tx_buf_size). Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mwifiex: adding check for enough space before paddingYogesh Ashok Powar
All MSDUs, except the last one in an AMSDU, should end up at 4 bytes boundary. There is need to check if enough skb_tailroom space exists before padding the skb. Also re-arranging code for better readablity. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mwifiex: Remove redundant skb_queue_empty checksYogesh Ashok Powar
The check of skb list empty before calling skb_peek and skb_dequeue is redundant. These functions returns NULL if the list is empty. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mwifiex: remove list traversal in mwifiex_num_pkts_in_txqYogesh Ashok Powar
Instead of counting the number of packets in txq for particular RA list before AMSDU creation, maintain a counter which will keep track of the same. This will reduce some MIPS while generating AMSDU traffic as we only have to check the counter instead of traversing through skb list. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07iwlwifi: remove unecessary if statementGreg Dietsche
the code always returns ret regardless, so if(ret) check is unecessary. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07iwlagn: refactor iwlagn_mac_channel_switchStanislaw Gruszka
Use less indentions and remove uneeded irq-save flags. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07wl12xx: Stop BA session event from deviceShahar Levi
Adding new event that close RX BA session in case of periodic BT activity limiting WLAN activity. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mac80211: Stop BA session event from deviceShahar Levi
Some devices support BT/WLAN co-existence algorigthms. In order not to harm the system performance and user experience, the device requests not to allow any RX BA session and tear down existing RX BA sessions based on system constraints such as periodic BT activity that needs to limit WLAN activity (eg.SCO or A2DP). In such cases, the intention is to limit the duration of the RX PPDU and therefore prevent the peer device to use A-MPDU aggregation. Adding ieee80211_stop_rx_ba_session() callback that can be used by the driver to stop existing BA sessions. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-06-06iwl4965: set tx power after rxon_assocStanislaw Gruszka
Setting tx power can be deferred during scan or changing channel. If after that correct tx power settings will not be sent to device, we can observe transmission problems and timeouts. Force to send tx power settings also after partial rxon change, to assure device always be configured with up-to-date settings. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=36492 Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-06rt2x00: fix rmmod crashStanislaw Gruszka
Avoid queue and run autowakeup_work when device is not present anymore. That prevent rmmod and device remove crash introduced by: commit 1c0bcf89d85cc97a0d9ce4cd909351a81fa4fdde Author: Ivo van Doorn <ivdoorn@gmail.com> Date: Sat Apr 30 17:18:18 2011 +0200 rt2x00: Add autowake support for USB hardware Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-06iwlagn: use cts-to-self protection on 5000 adapters seriesStanislaw Gruszka
This patch fixes 802.11n stability and performance regression we have since 2.6.35. It boost performance on my 5GHz N-only network from about 5MB/s to 8MB/s. Similar percentage boost can be observed on 2.4 GHz. These are test results of 5x downloading of approximately 700MB iso image: vanilla: 5.27 5.22 4.94 4.47 5.31 ; avr 5.0420 std 0.35110 patched: 8.07 7.95 8.06 7.99 7.96 ; avr 8.0060 std 0.055946 This was achieved with NetworkManager configured to do not perform periodical scans, by configuring constant BSSID. With periodical scans, after some time, performance downgrade to unpatched driver level, like in example below: patched: 7.40 7.61 4.28 4.37 4.80 avr 5.6920 std 1.6683 However patch still make better here, since similar test on unpatched driver make link disconnects with below messages after some time: wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticate with 00:23:69:35:d1:3f (try 3) wlan1: authentication with 00:23:69:35:d1:3f timed out On 2.6.35 kernel patch helps against connection hangs with messages: iwlagn 0000:20:00.0: queue 10 stuck 3 time. Fw reload. iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-06Revert "mac80211: Skip tailroom reservation for full HW-crypto devices"John W. Linville
This reverts commit aac6af5534fade2b18682a0b9efad1a6c04c34c6. Conflicts: net/mac80211/key.c That commit has a race that causes a warning, as documented in the thread here: http://marc.info/?l=linux-wireless&m=130717684914101&w=2 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlagn: call commit_rxon function directlyWey-Yi Guy
No need to go though multiple levels of indirect call to send RXON command. Call it directly Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlagn: direct call to post_scan functionWey-Yi Guy
After driver split, no need to use function "ops" for post_scan. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlagn: move all post scan functions in one placeWey-Yi Guy
Both tx power and power save are being done after scan complete, move into post_scan function Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlagn: set smps mode after assoc for 1000 deviceWey-Yi Guy
For some timing reason, 1000 device having problem to kick-in to aggregation without sending rxon assoc command. This is a W/A until find the real reason Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlagn: save the latest smps modeWey-Yi Guy
When change smps mode due to bt coex, save it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlegacy: add missing null checkGreg Dietsche
lq_sta has other null checks in this function. assuming they are correct, this additional null check should be added too. Incorporating suggestion from Gustavo Padovan. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlegacy: propagate error return valueGreg Dietsche
propogate the return value from iwl4965_get_tx_atten_grp instead of implicitly returning -EINVAL in the error case. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlegacy: return -EINVAL instead of -1Greg Dietsche
Cleanup the code to return -EINVAL instead of -1 Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlegacy: remove unecessary if statementGreg Dietsche
the code always returns ret regardless, so if(ret) check is unecessary. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03iwlegacy: remove unreachable codeGreg Dietsche
return; at the end of the function is unecessary. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03b43: add BCMA 80211 core specific definesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-09-18 00:09:32 (GMT)