summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-02-09netfilter: nf_conntrack_ipv6: don't track ICMPv6 negotiation messageEric Leblond
This patch removes connection tracking handling for ICMPv6 messages related to Stateless Address Autoconfiguration, MLD, and MLDv2. They can not be tracked because they are massively using multicast (on pre-defined address). But they are not invalid and should not be detected as such. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09netfilter: fix tuple inversion for Node information requestEric Leblond
The patch fixes a typo in the inverse mapping of Node Information request. Following draft-ietf-ipngwg-icmp-name-lookups-09, "Querier" sends a type 139 (ICMPV6_NI_QUERY) packet to "Responder" which answer with a type 140 (ICMPV6_NI_REPLY) packet. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: don't use spin_is_contended
2009-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: Storage: Update unusual_devs entry for Datafab KECF-USB USB: Correct Makefile to make isp1760 buildable USB: option: New mobile broadband modems to be supported USB: two more usb ids for ti_usb_3410_5052 USB: ftdi_sio: unlock_kernel() on error in set_serial_info() USB: usb-storage: add Pentax to the bad-vendor list USB: ftdi_sio: add support for the NDI Polaris system USB: usb-serial: fix the aircable_init failure path USB: usb-storage: remove WARN from last-sector hacks Revert USB: option: add Pantech cards USB: cdc-acm.c: remove duplicate lines for MTK gps support USB: fsl_qe_udc: Fix stalled TX requests bug USB: fsl_qe_udc: Fix muram corruption by disabled endpoints USB: fsl_qe_udc: Fix disconnects reporting during bus reset USB: fsl_qe_udc: Fix QE USB controller initialization USB: fsl_qe_udc: Fix recursive locking bug in ch9getstatus() USB: fsl_qe_udc: Fix oops on QE UDC probe failure
2009-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: panel: fix lcd panel driver build failure Staging: android: fix up units in timed_gpio Staging: android: ram_console: Disable ECC when early init is enabled and validate buffer size Staging: at76_usb: Add support for OQO Model 01+ Staging: at76_usb: fix bugs introduced by "Staging: at76_usb: cleanup dma on stack issues" Revert Staging: at76_usb: update drivers/staging/at76_usb w/ mac80211 port
2009-02-09Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8: Get transition latency from ACPI _PSS table [CPUFREQ] Make ignore_nice_load setting of ondemand work as expected.
2009-02-09Btrfs: don't use spin_is_contendedChris Mason
Btrfs was using spin_is_contended to see if it should drop locks before doing extent allocations during btrfs_search_slot. The idea was to avoid expensive searches in the tree unless the lock was actually contended. But, spin_is_contended is specific to the ticket spinlocks on x86, so this is causing compile errors everywhere else. In practice, the contention could easily appear some time after we started doing the extent allocation, and it makes more sense to always drop the lock instead. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-09Staging: panel: fix lcd panel driver build failureSachin P. Sant
* Fix build break for lcd panel driver. Signed-off-by : Sachin Sant <sachinp@in.ibm.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Staging: android: fix up units in timed_gpioGreg Kroah-Hartman
The last build fix I did messed up the units of the sysfs file. This puts them back to be milliseconds, like they originally were. Thanks to Juha Motorsportcom for pointing this out. Reported-by: Juha Motorsportcom <juha_motorsportcom@luukku.com> Cc: Mike Lockwood <lockwood@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Staging: android: ram_console: Disable ECC when early init is enabled and ↵Arve Hjønnevåg
validate buffer size Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Staging: at76_usb: Add support for OQO Model 01+Jamie Lentin
Add USB device ID for OQO 01+'s internal wireless LAN An OQO employee mentions the chip's true identity here:- ftp://ftp.oqo.com/unsupported/linux/OQOLinux.html Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Staging: at76_usb: fix bugs introduced by "Staging: at76_usb: cleanup dma on ↵Jason Andryuk
stack issues" Tracking down the firmware loading problem led to this commit. $ git bisect bad 0d1d1424330cc1934f2b2742f0cfa2c31e6a250b is first bad commit commit 0d1d1424330cc1934f2b2742f0cfa2c31e6a250b Author: Oliver Neukum <oliver@neukum.org> Date: Thu Dec 18 13:16:40 2008 +0100 Staging: at76_usb: cleanup dma on stack issues - no DMA on stack - cleanup unclear endianness issue Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> :040000 040000 c4fee9ea0fef25926229d810d19dc2f89cca9401 8b165a35d16280d2413b2700a6080ef290ca1009 M drivers The "no DMA on stack" conversion was incomplete with respect to updating the arguments passed to usb_control_msg. The value 40 is hardcoded as it was prior to conversion. The driver can now load firmware, but is not fully functional. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Revert Staging: at76_usb: update drivers/staging/at76_usb w/ mac80211 portGreg Kroah-Hartman
Reverts 02227c28391b5059a7710d6039c52912b0ee2c1d (Had to be done by hand due to other patches that had come after this.) Turns out that we don't want the mac80211 port of this driver just yet, as there is a different driver working on adding this support. So keep things old and different for now. This is being reverted at the request of the linux-wireless developers. Cc: Kalle Valo <kalle.valo@iki.fi> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: Storage: Update unusual_devs entry for Datafab KECF-USBNick Holloway
This device suffers from the off-by-one error when reporting the capacity, so add US_FL_FIX_CAPACITY to the existing entry. Signed-off-by: Nick Holloway <Nick.Holloway@pyrites.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: Correct Makefile to make isp1760 buildableIvan Kuten
Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: option: New mobile broadband modems to be supportedDirk De Schepper
- New Novatel and Dell mobile broadband modem products added - Dell pid variables used in stead of numerical PIDs for known products Signed-off-by: Dirk De Schepper <ddeschepper@nvtl.com> Cc: stable <stable@kernel.org> Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: two more usb ids for ti_usb_3410_5052Oliver Neukum
This patch adds device IDs and balances the counts to make the hot ID additioning mechanism work. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Cc: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: ftdi_sio: unlock_kernel() on error in set_serial_info()Dan Carpenter
There was one error path where unlock_kernel() wasn't called. This was found with a code checker (http://repo.or.cz/w/smatch.git/) Compile tested only, sorry. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: usb-storage: add Pentax to the bad-vendor listAlan Stern
This patch (as1202) adds Pentax to usb-storage's list of bad vendors whose devices always need the CAPACITY_HEURISTICS flag. This is in addition to the existing entries: Nokia, Nikon, and Motorola. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Virgo Pärna <virgo.parna@mail.ee> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: ftdi_sio: add support for the NDI Polaris systemStephane Clerambault
Add support for the NDI Polaris system *http://www.ndigital.com/). Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: usb-serial: fix the aircable_init failure pathDave Young
The failure path of aircable_init is wrong, fix the order of (goto) labels. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: Naranjo Manuel Francisco <naranjo.manuel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: usb-storage: remove WARN from last-sector hacksAlan Stern
This patch (as1201) removes the WARN() from the last-sector hacks in usb-storage, thereby making the code match the version now in .27-stable and .28-stable. The WARN() isn't needed, since there is no longer any intention of assuming that all storage devices have an even number of sectors, and it annoys users for no good reason. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Revert USB: option: add Pantech cardsGreg Kroah-Hartman
Revert 8b6346ec899713a90890c9e832f7eff91ea73504 as these devices really work just fine with the cdc-acm driver, as they follow the spec properly. Thanks to Chuck Ebbert for pointing out the problem here. Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: cdc-acm.c: remove duplicate lines for MTK gps supportJames Treacy
The same patch to add support for MTK gps loggers was submitted by two different people and applied twice. Remove the redundant lines. Signed-off-by: James Treacy <treacy@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix stalled TX requests bugAnton Vorontsov
While disabling an endpoint the driver nuking any pending requests, thus completing them with -ESHUTDOWN status. But the driver doesn't clear the tx_req, which means that a next TX request (after ep_enable), might get stalled, since the driver won't queue the new reqests. This patch fixes a bug I'm observing with ethernet gadget while playing with ifconfig usb0 up/down (the up/down sequence disables and enables `in' and `out' endpoints). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix muram corruption by disabled endpointsAnton Vorontsov
Before freeing an endpoint's muram memory, we should stop all activity of the endpoint, otherwise the QE UDC controller might do nasty things with the muram memory that isn't belong to that endpoint anymore. The qe_ep_reset() effectively flushes the hardware fifos, finishes all late transaction and thus prevents the corruption. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix disconnects reporting during bus resetAnton Vorontsov
Freescale QE UDC controllers can't report the "port change" states, so the only way to handle disconnects is to process bus reset interrupts. The bus reset can take some time, that is, few irqs. Gadgets may print the disconnection events, and this causes few repetitive messages in the kernel log. This patch fixes the issue by using the usb_state machine, if the usb controller has been already reset, just quit the reset irq early. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix QE USB controller initializationAnton Vorontsov
qe_udc_reg_init() leaves the USB controller enabled before muram memory initialized. Sometimes the uninitialized muram memory confuses the controller, and it start sending the busy interrupts. Fix this by disabling the controller, it will be enabled later by the gadget driver, at bind time. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix recursive locking bug in ch9getstatus()Anton Vorontsov
The call chain is this: qe_udc_irq() <- grabs the udc->lock spinlock rx_irq() qe_ep0_rx() ep0_setup_handle() setup_received_handle() ch9getstatus() qe_ep_queue() <- tries to grab the udc->lock again It seems unsafe to temporarily drop the lock in the ch9getstatus(), so to fix that bug the lock-less __qe_ep_queue() function implemented and used by the ch9getstatus(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09USB: fsl_qe_udc: Fix oops on QE UDC probe failureAnton Vorontsov
In case of probing errors the driver kfrees the udc_controller, but it doesn't set the pointer to NULL. When usb_gadget_register_driver is called, it checks for udc_controller != NULL, the check passes and the driver accesses nonexistent memory. Fix this by setting udc_controller to NULL in case of errors. While at it, also implement irq_of_parse_and_map()'s failure and cleanup cases. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09Merge branch 'for-2.6.29' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: lockd: fix regression in lockd's handling of blocked locks
2009-02-09lockd: fix regression in lockd's handling of blocked locksJ. Bruce Fields
If a client requests a blocking lock, is denied, then requests it again, then here in nlmsvc_lock() we will call vfs_lock_file() without FL_SLEEP set, because we've already queued a block and don't need the locks code to do it again. But that means vfs_lock_file() will return -EAGAIN instead of FILE_LOCK_DENIED. So we still need to translate that -EAGAIN return into a nlm_lck_blocked error in this case, and put ourselves back on lockd's block list. The bug was introduced by bde74e4bc64415b1 "locks: add special return value for asynchronous locks". Thanks to Frank van Maarseveen for the report; his original test case was essentially for i in `seq 30`; do flock /nfsmount/foo sleep 10 & done Tested-by: Frank van Maarseveen <frankvm@frankvm.com> Reported-by: Frank van Maarseveen <frankvm@frankvm.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-02-09i915: Fix more size_t format string warningsLinus Torvalds
The DRI people seem to have a hard time getting these right (see also commit aeb565dfc3ac4c8b47c5049085b4c7bfb2c7d5d7). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: select framebuffer support automatically drm/i915: add get_vblank_counter function for GM45 drm/i915: capture last_vblank count at IRQ uninstall time too drm/i915: Unlock mutex on i915_gem_fault() error path drm/i915: Quiet the message on get/setparam ioctl with an unknown value. drm/i915: skip LVDS initialization on Apple Mac Mini drm/i915: sync SDVO code with stable userland modesetting driver drm/i915: Unref the object after failing to set tiling mode. drm/i915: add fence register management to execbuf drm/i915: Return error from i915_gem_object_get_fence_reg() when failing. drm/i915: Set up an MTRR covering the GTT at driver load. drm/i915: Skip SDVO/HDMI init when the chipset tells us it's not present. drm/i915: Suppress GEM teardown on X Server exit in KMS mode. drm/radeon: fix ioremap conflict with AGP mappings i915: fix unneeded locking in i915 LVDS get modes code.
2009-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: scatterwalk - Avoid flush_dcache_page on slab pages crypto: shash - Fix tfm destruction crypto: api - Fix zeroing on free crypto: shash - Fix module refcount crypto: api - Fix algorithm test race that broke aead initialisation
2009-02-09FRV: in_interrupt() requires #inclusion of linux/hardirq.h not asm/hardirq.h nowDavid Howells
in_interrupt() requires #inclusion of linux/hardirq.h not asm/hardirq.h now. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09x86: spinlocks: define dummy __raw_spin_is_contendedKyle McMartin
Architectures other than mips and x86 are not using ticket spinlocks. Therefore, the contention on the lock is meaningless, since there is nobody known to be waiting on it (arguably /fairly/ unfair locks). Dummy it out to return 0 on other architectures. Signed-off-by: Kyle McMartin <kyle@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09x86: math_emu info cleanupTejun Heo
Impact: cleanup * Come on, struct info? s/struct info/struct math_emu_info/ * Use struct pt_regs and kernel_vm86_regs instead of defining its own register frame structure. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: include correct %gs in a.out core dumpTejun Heo
Impact: dump the correct %gs into a.out core dump aout_dump_thread() read %gs but didn't include it in core dump. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86, vmi: put a missing paravirt_release_pmd in pgd_dtorAlok Kataria
Commit 6194ba6ff6ccf8d5c54c857600843c67aa82c407 ("x86: don't special-case pmd allocations as much") made changes to the way we handle pmd allocations, and while doing that it dropped a call to paravirt_release_pd on the pgd page from the pgd_dtor code path. As a result of this missing release, the hypervisor is now unaware of the pgd page being freed, and as a result it ends up tracking this page as a page table page. After this the guest may start using the same page for other purposes, and depending on what use the page is put to, it may result in various performance and/or functional issues ( hangs, reboots). Since this release is only required for VMI, I now release the pgd page from the (vmi)_pgd_free hook. Signed-off-by: Alok N Kataria <akataria@vmware.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org>
2009-02-09x86: find nr_irqs_gsi with mp_ioapic_routingYinghai Lu
Impact: find right nr_irqs_gsi on some systems. One test-system has gap between gsi's: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48]) [ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56]) [ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62 ... [ 0.000000] nr_irqs_gsi: 38 So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic. need to get that with acpi_probe_gsi when acpi io_apic is used Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: add clflush before monitor for Intel 7400 seriesPallipadi, Venkatesh
For Intel 7400 series CPUs, the recommendation is to use a clflush on the monitored address just before monitor and mwait pair [1]. This clflush makes sure that there are no false wakeups from mwait when the monitored address was recently written to. [1] "MONITOR/MWAIT Recommendations for Intel Xeon Processor 7400 series" section in specification update document of 7400 series http://download.intel.com/design/xeon/specupdt/32033601.pdf Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-02-09sparc64: Fix probe_kernel_{read,write}().David S. Miller
This is based upon a report from Chris Torek and his initial patch. From Chris's report: -------------------- This came up in testing kgdb, using the built-in tests -- turn on CONFIG_KGDB_TESTS, then echo V1 > /sys/module/kgdbts/parameters/kgdbts -- but it would affect using kgdb if you were debugging and looking at bad pointers. -------------------- When we get a copy_{from,to}_user() request and the %asi is set to something other than ASI_AIUS (which is userspace) then we branch off to a routine called memcpy_user_stub(). It just does a straight memcpy since we are copying from kernel to kernel in this case. The logic was that since source and destination are both kernel pointers we don't need to have exception checks. But for what probe_kernel_{read,write}() is trying to do, we have to have the checks, otherwise things like kgdb bad kernel pointer accesses don't do the right thing. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09sparc64: Kill .fixup section bloat.David S. Miller
This is an implementation of a suggestion made by Chris Torek: -------------------- Something else I noticed in passing: the EX and EX_LD/EX_ST macros scattered throughout the various .S files make a fair bit of .fixup code, all of which does the same thing. At the cost of one symbol in copy_in_user.S, you could just have one common two-instruction retl-and-mov-1 fixup that they all share. -------------------- The following is with a defconfig build: text data bss dec hex filename 3972767 344024 584449 4901240 4ac978 vmlinux.orig 3968887 344024 584449 4897360 4aba50 vmlinux Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09crypto: scatterwalk - Avoid flush_dcache_page on slab pagesHerbert Xu
It's illegal to call flush_dcache_page on slab pages on a number of architectures. So this patch avoids doing so if PageSlab is true. In future we can move the flush_dcache_page call to those page cache users that actually need it. Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-09netxen: fix msi-x interrupt handlingDhananjay Phadke
o Cut down msi-x vectors from 8 to 1 since only one is used for now. o Use separate handler for msi-x, that doesn't unnecessarily scrub msi status register. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09de2104x: force correct order when writing to rx ringRisto Suominen
DescOwn should not be set, thus allowing the chip to use the descriptor, before everything else is set up correctly. Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09tun: Fix unicast filter overflowAlex Williamson
Tap devices can make use of a small MAC filter set via the TUNSETTXFILTER ioctl. The filter has a set of exact matches plus a hash for imperfect filtering of additional multicast addresses. The current code is unbalanced, adding unicast addresses to the multicast hash, but only checking the hash against multicast addresses. This results in the filter dropping unicast addresses that overflow the exact filter. The fix is simply to disable the filter by leaving count set to zero if we find non-multicast addresses after the exact match table is filled. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09drivers/isdn: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-07-07 20:12:07 (GMT)