summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-29ARM: 7775/1: mm: Remove do_sect_fault from LPAE codeSteven Capper
For LPAE, do_sect_fault used to be invoked as the second level access flag handler. When transparent huge pages were introduced for LPAE, do_page_fault was used instead. Unfortunately, do_sect_fault remains defined but not used for LPAE code resulting in a compile warning. This patch surrounds do_sect_fault with #ifndef CONFIG_ARM_LPAE to fix this warning. Signed-off-by: Steve Capper <steve.capper@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-29ARM: 7777/1: Avoid extra calls to the C compilerDouglas Anderson
Starting up the C compiler can be a slow operation on some systems. Though these calls don't individually take a lot of time, they add up. Rearrange the ARM Makefile a bit to avoid extra calls to the compiler when they can be easily avoided. When running with the Chrome OS ARM cross compiler "armv7a-cros-linux-gnueabi-", this shaved .55 seconds (from 5.31 seconds to 4.76 seconds) off an incremental build of the kernel: time make -j32 ARCH=arm CROSS_COMPILE=armv7a-cros-linux-gnueabi- Thanks to Mike Frysinger for the clean trick to make this work. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-29ARM: 7774/1: Fix dtb dependency to use order-only prerequisitesDouglas Anderson
The %.dtb dependency is specified to depend on the PHONY "scripts". That means that it'll build every time even if the underlying dtb file hasn't been touched. Use an order-only prerequisites to fix this. Also mark "dtbs" as PHONY for correctness. This was broken in (70b0476 ARM: 7513/1: Make sure dtc is built before running it). Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Olof Johansson <olof@lixom.net> Reviewed-by: David Brown <davidb@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-29lseek_execute() doesn't need an inode passed to itAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29block_dev: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29cpqphp_sysfs: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29tile-srom: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29proc_powerpc: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29ubi/cdev: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29pci/proc: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29isapnp: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29lpfc: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: give the blocked_hash its own spinlockJeff Layton
There's no reason we have to protect the blocked_hash and file_lock_list with the same spinlock. With the tests I have, breaking it in two gives a barely measurable performance benefit, but it seems reasonable to make this locking as granular as possible. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: add a new "lm_owner_key" lock operationJeff Layton
Currently, the hashing that the locking code uses to add these values to the blocked_hash is simply calculated using fl_owner field. That's valid in most cases except for server-side lockd, which validates the owner of a lock based on fl_owner and fl_pid. In the case where you have a small number of NFS clients doing a lot of locking between different processes, you could end up with all the blocked requests sitting in a very small number of hash buckets. Add a new lm_owner_key operation to the lock_manager_operations that will generate an unsigned long to use as the key in the hashtable. That function is only implemented for server-side lockd, and simply XORs the fl_owner and fl_pid. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: turn the blocked_list into a hashtableJeff Layton
Break up the blocked_list into a hashtable, using the fl_owner as a key. This speeds up searching the hash chains, which is especially significant for deadlock detection. Note that the initial implementation assumes that hashing on fl_owner is sufficient. In most cases it should be, with the notable exception being server-side lockd, which compares ownership using a tuple of the nlm_host and the pid sent in the lock request. So, this may degrade to a single hash bucket when you only have a single NFS client. That will be addressed in a later patch. The careful observer may note that this patch leaves the file_lock_list alone. There's much less of a case for turning the file_lock_list into a hashtable. The only user of that list is the code that generates /proc/locks, and it always walks the entire list. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: convert fl_link to a hlist_nodeJeff Layton
Testing has shown that iterating over the blocked_list for deadlock detection turns out to be a bottleneck. In order to alleviate that, begin the process of turning it into a hashtable. We start by turning the fl_link into a hlist_node and the global lists into hlists. A later patch will do the conversion of the blocked_list to a hashtable. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: avoid taking global lock if possible when waking up blocked waitersJeff Layton
Since we always hold the i_lock when inserting a new waiter onto the fl_block list, we can avoid taking the global lock at all if we find that it's empty when we go to wake up blocked waiters. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: protect most of the file_lock handling with i_lockJeff Layton
Having a global lock that protects all of this code is a clear scalability problem. Instead of doing that, move most of the code to be protected by the i_lock instead. The exceptions are the global lists that the ->fl_link sits on, and the ->fl_block list. ->fl_link is what connects these structures to the global lists, so we must ensure that we hold those locks when iterating over or updating these lists. Furthermore, sound deadlock detection requires that we hold the blocked_list state steady while checking for loops. We also must ensure that the search and update to the list are atomic. For the checking and insertion side of the blocked_list, push the acquisition of the global lock into __posix_lock_file and ensure that checking and update of the blocked_list is done without dropping the lock in between. On the removal side, when waking up blocked lock waiters, take the global lock before walking the blocked list and dequeue the waiters from the global list prior to removal from the fl_block list. With this, deadlock detection should be race free while we minimize excessive file_lock_lock thrashing. Finally, in order to avoid a lock inversion problem when handling /proc/locks output we must ensure that manipulations of the fl_block list are also protected by the file_lock_lock. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: encapsulate the fl_link list handlingJeff Layton
Move the fl_link list handling routines into a separate set of helpers. Also ensure that locks and requests are always put on global lists last (after fully initializing them) and are taken off before unintializing them. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: make "added" in __posix_lock_file a boolJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: comment cleanups and clarificationsJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: make generic_add_lease and generic_delete_lease staticJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29cifs: use posix_unblock_lock instead of locks_delete_blockJeff Layton
commit 66189be74 (CIFS: Fix VFS lock usage for oplocked files) exported the locks_delete_block symbol. There's already an exported helper function that provides this capability however, so make cifs use that instead and turn locks_delete_block back into a static function. Note that if fl->fl_next == NULL then this lock has already been through locks_delete_block(), so we should be OK to ignore an ENOENT error here and simply not retry the lock. Cc: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: drop the unused filp argument to posix_unblock_lockJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29Don't pass inode to ->d_hash() and ->d_compare()Linus Torvalds
Instances either don't look at it at all (the majority of cases) or only want it to find the superblock (which can be had as dentry->d_sb). A few cases that want more are actually safe with dentry->d_inode - the only precaution needed is the check that it hadn't been replaced with NULL by rmdir() or by overwriting rename(), which case should be simply treated as cache miss. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29minix: bug widening a binary "not" operationDan Carpenter
"chunk_size" is an unsigned int and "pos" is an unsigned long. The "& ~(chunk_size-1)" operation clears the high 32 bits unintentionally. The ALIGN() macro does the correct thing. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2013-06-29splice: lift checks from do_splice_from() into callersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29constify rw_verify_area()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29ps3flash: switch to generic_file_llseek_size()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29wlcore: use *ppos, not file->f_posAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29bfa: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29fnic: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29vc: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29eisa_eeprom: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29bna: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29zorro: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29mtdchar: switch to fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29new helper: fixed_size_llseek()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29ecryptfs: switch ecryptfs_decode_and_decrypt_filename() from dentry to sbAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29fuse: another open-coded file_inode()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29btrfs: more open-coded file_inode()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29fanotify: quit wanking with FASYNC in ->release()Al Viro
... especially since there's no way to get that sucker on the list fsnotify_fasync() works with - the only thing adding to it is fsnotify_fasync() itself and it's never called for fanotify files while they are opened. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29comedi: quit wanking with FASYNC in ->release()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29more open-coded file_inode() callsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29kill find_inode_number()Al Viro
the only remaining caller (in ncpfs) is guaranteed to return 0 - we only hit it if we'd just checked that there's no dentry with such name. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29coda: don't bother with find_inode_number()Al Viro
the fallback it's using for dcache misses is actually the same value we would've used for inumber anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29proc_fill_cache(): clean up, get rid of pointless find_inode_number() useAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29proc_fill_cache(): just make instantiate_t return intAl Viro
all instances always return ERR_PTR(-E...) or NULL, anyway Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29proc_pid_readdir(): stop wanking with proc_fill_cache() for /proc/selfAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29proc_fill_cache(): kill pointless checkAl Viro
we'd just checked that child->d_inode is non-NULL, for fuck sake! Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>