summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-11crypto: caam - enable raw data instead of von Neumann dataAlex Porosanu
The sampling of the oscillator can be done in multiple modes for generating the entropy value. By default, this is set to von Neumann. This patch changes the sampling to raw data, since it has been discovered that the generated entropy has a better 'quality'. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit e5ffbfc182bc148f44840bdd3970ea4c8bf80c3c) Change-Id: Ib366aa7e0477b2793f648333f2798a5c7b59ec5f Reviewed-on: http://git.am.freescale.net:8181/23839 Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com> Tested-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11crypto: caam - change starting entropy delay valueAlex Porosanu
The entropy delay (the length in system clocks of each entropy sample) for the RNG4 block of CAAM is dependent on the frequency of the SoC. By elaborate methods, it has been determined that a good starting value for all platforms integrating the CAAM IP is 3200. Using a higher value has additional benefit of speeding up the process of instantiating the RNG, since the entropy delay will be increased and instantiation of the RNG state handles will be reattempted by the driver. If the starting value is low, for certain platforms, this can lead to a quite lengthy process. This patch changes the starting value of the length of the entropy sample to 3200 system clocks. In addition to this change, the attempted entropy delay values are now printed on the console upon initialization of the RNG block. While here, a safeguard for yielding the processor was added for ensuring that in very adverse cases, the CPU isn't hogged by the instantiation loop. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit eeaa1724a2e9c8958a8621b3c10d5ca0667e78fa) Conflicts: drivers/crypto/caam/ctrl.c Change-Id: Ibc271d629cef3cab291ac8e5c8e7b68b0dc7c1e3 Reviewed-on: http://git.am.freescale.net:8181/23840 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11crypto: caam - disable RNG oscillator maximum frequency checkAlex Porosanu
The rtfrqmax & rtfrqmin set the bounds of the expected frequency of the oscillator, when SEC runs at its maximum frequency. For certain platforms (f.i. T2080), the oscillator is very fast and thus if the SEC runs at a lower than normal frequency, the ring oscillator is incorrectly detected as being out of bounds. This patch effectively disables the maximum frequency check, by setting a high enough maximum allowable frequency for the oscillator. The reasoning behind this is that usually a broken oscillator will run too slow (i.e. not run at all) rather than run too fast. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit b061f3fefcffa0cdcdc61ae2a1123a4e7697d452) Change-Id: I796cf92bf08c66d0499bfe3962dcd67afd51a72e Reviewed-on: http://git.am.freescale.net:8181/23838 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11powerpc/corenet: use the mixed mode of MPIC when enabling CPU hotplugChenhui Zhao
Core reset may cause issue if using the proxy mode of MPIC. Use the mixed mode of MPIC if enabling CPU hotplug. Change-Id: I0e6b9dbd2126f0fb0af917d25c948266417bb71f Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/24102 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Yang Li <LeoLi@freescale.com> Reviewed-by: Dongsheng Wang <dongsheng.wang@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11arm: ls1: provide a workaround for core soft resetZhang Zhuoyu
Due to an erratum, after core soft reset, core state machine registers need to force release manually to avoid cache coherence issue. Signed-off-by: Zhang Zhuoyu <Zhuoyu.Zhang@freescale.com> ---- Fix previous known issue http://git.am.freescale.net:8181/21918 Change-Id: I44a7cf8a315bafe7dc413f73d2af2579da246fbb Reviewed-on: http://git.am.freescale.net:8181/23520 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11arm: ls1: implement ls1 cpu-hotplug by reset coreZhang Zhuoyu
CPU hotplug should always reset core and boots up the same path as a cold boot to be compatible with kexec. Signed-off-by: Zhang Zhuoyu <Zhuoyu.Zhang@freescale.com> ---- Fix previous known issue http://git.am.freescale.net:8181/21918 Patch Sent Upstream http://patchwork.ozlabs.org/patch/393683/ Change-Id: I668b59b4250ef62395a6fd8c22ea64f64af9d106 Reviewed-on: http://git.am.freescale.net:8181/23519 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Yuantian Tang <yuantian.tang@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11drivers:usb:pm: Fix usb wake-up issue in rcpm drvRamneek Mehresh
fsl_set_power_except() checks only for fman node. For all other ips, it doesn't program rcpm register, and goes to err handling code. Hence, a check for usb is put so that fman code only runs for fman ip Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Change-Id: Ia8b2280cbcd16b7935032c72fcc49dadcd2f263c Reviewed-on: http://git.am.freescale.net:8181/23989 Reviewed-by: Nikhil Badola <nikhil.badola@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11qbman: Corrections based on static analysisAhmed Mansour
ioctl_dma_map. String length check Added check to ensure the string copied from user space is within the length allowed for by the buffer and is null terminated. qm_shutdown_fq. Remove deadcode Removed the case statement label for QM_MCR_NP_STATE_OOS since that condition is checked for earlier in the code and in that case the function exits immediately. ioctl_dma_lock. Remove NULL dereference A pointer is made null and then there is an attempt to dereference one of the members of the struct that it points to. This condition is never reached normally, but in error conditions this path of execution may be possible. Added return -EFAULT to exit function safely and unlocked locked resources usdpaa_get_unmapped_area. Arithmetic overflow protection Added a check to ensure that memory length passed in does not result in an invalid size to be passed because of a possible arithmetic overflow that can occur in the subtraction in the macro USDPAA_MEM_ROUNDUP. qman_ceetm_ccg_claim. If condition fix Removed a check against an unsigned int value that checks if it is below zero (negative). The unsigned value cannot be negative and the compare will always fail in reality. qman_create_portal. Add comment to clarify flow Clarified why no check is made to ensure that qm_mr_current() returned successfully. The addition of a redundant check was rejected because it impairs the reader's understanding of the flow by implying the possibility of a physically impossible path. dpa_alloc_new. Fix memory leak in error conditions Previously allocated memory which is passed by reference in success (list_add_tail) is not freed in error conditions that occur in other parts of the function. Added code to free allocated memory in error cases. qman_create_portal. Fix memory leak in error path Added cleanup code that deletes malloced memory in case of function failure after memory is allocated. ioctl_dma_map. Input bound checks on values from USDPAA Check the struct usdpaa_ioctl_dma_map, input, to ensure that values copied from user space are valid input. qman_init. Check init_pcfg return Previously unused assignment is now being used. The return of init_pcfg() was not checked for success. Now we check for success and print an error message in case of failure. There is a similar issue in bman_driver. bman_init. Check init_pcfg return Added check to ensure init_pcfg() is returning successfully. Print an error message and return if in error case. There is a similar issue in qman_driver. Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com> Change-Id: I230678948c3e8e43aa5738045244c5dac0b5f5f5 Reviewed-on: http://git.am.freescale.net:8181/21381 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jeffrey Ladouceur <Jeffrey.Ladouceur@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11Set affinity for USDPAA IRQsRoy Pledge
Set the affinity of the USDPAA IRQ to match the affinity of the calling process Signed-off-by: Roy Pledge <Roy.Pledge@freescale.com> Change-Id: I077a48ae5a77fe35a77dfae65c298fa6fa2aecda Reviewed-on: http://git.am.freescale.net:8181/23675 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Reviewed-by: Jeffrey Ladouceur <Jeffrey.Ladouceur@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11powerpc/rcpm: fix compile error with non-SMP modeChenhui Zhao
Add asm/smp.h, and only compile the cluster related code when CPU hotplug is enabled. Change-Id: I264ff297ca1ee29bf8c477b09bce98eeb27140ee Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/23752 Reviewed-by: Yang Li <LeoLi@freescale.com> Reviewed-by: Zhuoyu Zhang <Zhuoyu.Zhang@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11t2080/usdpaa/dts: Corrected default rx frame queue idSandeep Singh
Default rx frame queue id should match with usdpaa xml policy file. Policy file is used to set FMAN configuration. Signed-off-by: Sandeep Singh <sandeep@freescale.com> Change-Id: I696d604c0811a8aa0b1ccf4ca6a67a0384eb558d Reviewed-on: http://git.am.freescale.net:8181/23859 Reviewed-by: Vakul Garg <vakul@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11dpa_offload: use SEC API for retrieving JRAlex Porosanu
SEC driver offers a function for geting the handle to an available JR (caam_jr_alloc(...) This is mainly needed for split-key calculation per SA. There's no need to search for the JR in the device tree. This patch removes the unneeded code and replaces it with the proper SEC API call. Change-Id: Ibc8b4b216d5699fe5ec7d3d49b8a3560ab79ede0 Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/23860 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Marian-Cornel Chereji <marian.chereji@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11fmd: fix static analysis issuesMandy Lavi
Change-Id: I2d6cead7b62116cd6a264ec91d82f3bdc3a03c10 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/23939 Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Tested-by: Richard Schmitt <richard.schmitt@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11dpa_offload: Relocate dpa_classifier entry in index management listMarian Chereji
For HASH tables sometimes when a user modifies the key of an entry the entry needs to be moved to a different bucket. The index management list is sorted so that indexes are always ascending. When tempering with the position of an entry in the internal Cc nodes for a HASH table, the position of the entry in the index management list must also be updated. Change-Id: If4b48282c407ed248dfd389cc0c8ae856fb7db75 Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/23700 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Radu-Andrei Bulie <Radu.Bulie@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11mmc: sdio: make sure sdio_irq_thread pointer is not NULL.Qiu Wujie
Signed-off-by: Wujie Qiu <B49553@freescale.com> Change-Id: Icf01605c71a19e0ffa01e85b1ed93eb0704493da Reviewed-on: http://git.am.freescale.net:8181/23831 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11usb: dwc3: core: support optional PHYsNikhil Badola
Since PHYs for dwc3 is optional (not all SoCs having PHYs for DWC3 should be programmed), do not return from probe if the USB PHY library returns -ENODEV as that indicates the platform does not have a programmable PHY. While this can be considered as a temporary fix, a long term solution would be to add 'nop' PHY for platforms that does not have programmable PHY. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> --- Backported from open source linux commit 122f06e60f90a43d9b2fb30662af688dfb759379 Change-Id: I69055c21ee4857db5ef941ad6eac20051f0d84fc Reviewed-on: http://git.am.freescale.net:8181/23713 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11powerpc/smp: fix cluster enter PCL10 issue when SMT disable on e6500Zhang Zhuoyu
When CPU SMT feature disabled on e6500, cluster can't enter PCL10. This patch fix it. Signed-off-by: Zhang Zhuoyu <Zhuoyu.Zhang@freescale.com> Change-Id: I362be661ceefd78e5d8b1d6f36331add4e9ef0af Reviewed-on: http://git.am.freescale.net:8181/23341 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Hongtao Jia <hongtao.jia@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11powerpc/rcpm: Fix cluster mask calculation issue on e6500Zhang Zhuoyu
If all cores of a cluster are disabled in u-boot, the cluster mask we calculate through cpu dts node is unreliable, this patch use hard cored threads number per cluster to fix it. Signed-off-by: Zhang Zhuoyu <Zhuoyu.Zhang@freescale.com> Change-Id: I8c76b4c592bebdacf55dc6c9d50bd65ea0fce89f Reviewed-on: http://git.am.freescale.net:8181/23340 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Yuantian Tang <yuantian.tang@freescale.com> Reviewed-by: Hongtao Jia <hongtao.jia@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11ls1020: Add crypto node alias in device treeRuchika Gupta
U-boot patches up the device tree crypto node for the era property. crypto node alias was missing in the ls1020 device trees. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Change-Id: I335cc0765a1f66c72d98bab737aab3012448bf18 Reviewed-on: http://git.am.freescale.net:8181/23508 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11Fix for watchdog expiry when running netperf UDP traffic with ASF enabled in ↵Sahil Malhotra
Linux. This patch is workaround for watchdog expiry problem on running netperf client on DUT with UDP traffic with ASF enabled. Change-Id: Ib9a9c8fd13e5ecb6f9daf30deb8f128b629c002d Signed-off-by: Sahil Malhotra <sahilmalhotra@freescale.com> CR:ENGR00336061 Reviewed-on: http://git.am.freescale.net:8181/23065 Reviewed-by: Sandeep Malik <Sandeep.Malik@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11ASF: Placing hooks in gianfar driver for both PPC and ARM platforms.Ganga Negi
Placing required compilation flags and hooks in gianfar driver for both ARM and PowerPC platforms. Signed-off-by: Ganga Negi <ganga.negi@freescale.com> Change-Id: I2f6c8fe40a2223013559bc6909a60e8963aa2a96 CR:ENGR00338962 (cherry picked from commit 509f3236615193c77e07797cde4729ccc8cb2ef5) Reviewed-on: http://git.am.freescale.net:8181/23585 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11pdb: Patch to replace flag CPU_BIG_ENDIAN with __BIG_ENDIANAlok Makhariya
Flag CPU_BIG_ENDIAN is not defined in powerpc config file so it is replace with __BIG_ENDIAN flag. Signed-off-by: Alok Makhariya <B46187@freescale.com> Change-Id: I8cf0b83ab53a6dd544de81cf17ad0441ebb08ce5 Reviewed-on: http://git.am.freescale.net:8181/23694 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11Revert "fmd: fix static analysis issues"Matthew Weigel
This reverts commit 5e921ed07acbc6f05536aac89b9edc2578663840. Change-Id: Ic4d1166b5ad6419f369e3be278f41ea5764ff6fc Reviewed-on: http://git.am.freescale.net:8181/23784 Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com> Tested-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11fmd: fix static analysis issuesMandy Lavi
Change-Id: I428d24ec05b1e6ef2137ad2ba6385ddfa3a01872 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/22882 Reviewed-by: Nir Erez <nir.erez@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com> Tested-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11powerpc/defconfig: Enable CONFIG_MTD_SPI_NOR_BASEShengzhou Liu
In order to use the SPI nor framework to detect NOR flash. Signed-off-by: Mingkai.Hu <Mingkai.Hu@freescale.com> Change-Id: I5f7b42316cefb618278d739c212bd7cbd4833e9c Reviewed-on: http://git.am.freescale.net:8181/23450 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11t10xx: updating config for t10xx platformShengzhou Liu
- enable CONFIG_RTC_DRV_DS1307 to support DS1339 RTC for T1024RDB. - enable CONFIG_I2C_MUX and CONFIG_I2C_MUX_PCA954x for T102x/T104x QDS/RDB. - enable CONFIG_MTD_SPI_NOR_BASE and update compatible to "micron,n25q512ax3" for SPI flash on T102xRDB and T104xRDB. - fix typo for CONFIG_SENSORS_LM90. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I3506779d51192d2bfaa28a3f863c019b612b6f96 Reviewed-on: http://git.am.freescale.net:8181/23525 Reviewed-by: Shaohui Xie <Shaohui.Xie@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11PCI: Layerscape: Add num-atus property to PCIe dts nodeMinghuan Lian
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Change-Id: Iaf58815549266cde2d082e789c34a975259d854f Reviewed-on: http://git.am.freescale.net:8181/23497 Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com> Tested-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11PCI: Layerscape: Call ls_pcie_host_init in PM resume functionMinghuan Lian
In PM resume function, we call ls_pcie_host_init function to re-initialize PCIe controller. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Change-Id: Ife9fe90d63563ce9c56f4757bd233b4df4c35188 Reviewed-on: http://git.am.freescale.net:8181/23498 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Dongsheng Wang <dongsheng.wang@freescale.com> Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11PCI: designware: Add support 4 ATUs assignmentMinghuan Lian
Currently, pcie-designware.c only supports two ATUs, ATU0 is used for CFG0 and MEM, ATU1 is used for CFG1 and IO. There is a conflict when MEM and CFG0 are accessed simultaneously. The patch adds 'num-atus' property to PCIe dts node to describe the number of PCIe controller's ATUs. If num_atus is bigger than or equal to 4, we will change ATUs assignment: ATU0 for CFG0, ATU1 for CFG1, ATU2 for MEM, ATU3 for IO. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> The patch is upstreaming http://patchwork.ozlabs.org/patch/409170/ Change-Id: I317bf8a3648eafeb221da6479b7788de0028d8c5 Reviewed-on: http://git.am.freescale.net:8181/23496 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11Added cache controller compatible strings for SOCs.Varun Sethi
Added cache controller compatible strings for T2080, B4420, T1040 and T1024. PAMU driver searches for a matching string while setting up L3 cache stashing. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Change-Id: I7503dc2d3ae2a7d38ad5aa395fb201dd4e377b96 Reviewed-on: http://git.am.freescale.net:8181/23418 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Vakul Garg <vakul@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11crypto:caam: Initialize sec4_sg_bytes to 0 in ahash_final_no_ctxRuchika Gupta
In function, ahash_final_no_ctx space is allocated for base edesc and hw desc commands, link tables. After SEC has finished executing the descriptor, ahash_unmap is called. In this function, unmapping of sec_sg_dma is done on the basis of variable sec4_sg_bytes in edesc. Since sec4_sg_bytes was not initialized when edesc was allocated, this results in kernel crash. caam algorithms registered in /proc/crypto Unable to handle kernel paging request at virtual address 7f5d8000 pgd = 80003000 [7f5d8000] *pgd=80000080005003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP THUMB2 Modules linked in: CPU: 0 PID: 96 Comm: cryptomgr_test Not tainted 3.12.19-rt30+ls1+gd62899c9b13f #4 task: ef1b7480 ti: cf98a000 task.ti: cf98a000 PC is at dma_cache_maint_page+0x3c/0xd4 LR is at __dma_page_dev_to_cpu+0x19/0x80 pc : [<8001285c>] lr : [<80012951>] psr: b0000133 sp : cf98b9b0 ip : 80012c09 fp : 7f5d8000 r10: 00000014 r9 : 8053f2c0 r8 : 804e0f04 r7 : 00000001 r6 : 00004000 r5 : 80558000 r4 : 24940000 r3 : 805215c0 r2 : ff080000 r1 : 00000340 r0 : 80558000 Flags: NzCV IRQs on FIQs on Mode SVC_32 ISA Thumb Segment kernel Control: 70c53c7d Table: 80003000 DAC: f45b2700 Process cryptomgr_test (pid: 96, stack limit = 0xcf98a248) Stack: (0xcf98b9b0 to 0xcf98c000) b9a0: 00000001 24940000 00000014 7f5d8000 b9c0: 00000001 cf8adc00 cf912000 00000014 00000000 80012951 8001514d 00000014 b9e0: 81579080 80012c09 80012c09 00000000 cf8adc00 80249d89 00000000 00210020 ba00: 00000000 40000193 81573b80 802f96c5 00000001 800302f5 cf98bd6c cf98bcfc ba20: 00000000 cf98bd6c cf98bd00 cf98bd68 00000003 00000000 00000001 8002e021 ba40: 0000001c 0000001c 000cf912 00000001 804e0f04 80012879 00000001 0000001c ba60: 00000040 80f4a240 00000001 cf8d3c00 000014b4 00000109 cf8d3c00 81578c44 ba80: 00000001 81579080 cf8d3c00 802877ad 804d9c44 cf8d3c00 0000010a 80244945 baa0: 00000000 80012879 cf912040 cf98bcf0 81578e00 0000010a cf8d3cc0 0000003f bac0: 00001360 81578c44 81574180 0000012c 81574188 ffff8c3a 0000003f 80522e44 bae0: 00000001 802883d1 80288351 0000000c 00000020 00000020 000cf912 00000001 bb00: 804e0f04 80012879 00000001 00000020 00000018 80f4a240 00000001 cf8d3c00 bb20: 000014f0 0000010c 00000860 80012951 cf8d3c00 0000010d 00000001 81579080 bb40: cf8d3c00 80249cf1 0000010c 802449ff 00000000 81573b80 cf912018 cf8adc00 bb60: 81578e00 0000010d cf8d3cc0 0000003f 802f7d9c 81578c44 81574180 0000012c bb80: 81574188 ffff8c3a 0000003f 80522e44 00000001 802883d1 80288351 0000000c bba0: 00000001 cf98a000 cf98a000 00000003 804d80c0 00000100 80523c40 8001b07f bbc0: 802f7da2 00000000 0000000a 00208040 ffff8c39 00000000 cf98a018 40000193 bbe0: 804d3e3c 00000000 cf98bc64 cf98a018 804d4b80 cf98a000 804deb60 8001b185 bc00: cf98a008 8001b6b5 00000087 8000ca01 f0002000 cf98bc30 804decdc 800083e3 bc20: 802f7da2 00000133 ffffffff 802f9a9b 00000000 00000000 00000001 00000000 bc40: 81573b80 cf98bdcc 00000000 cf98bc88 cf98a018 804d4b80 cf98a000 804deb60 bc60: 800128f5 cf98bc78 802f7d9d 802f7da2 00000133 ffffffff 00000001 00000000 bc80: cf98bcf4 00030002 00000014 00000014 802f8011 804d4b80 804e0f04 80012879 bca0: 00000050 00000050 000cf970 00000001 804e0f04 80012879 00000001 00000270 bcc0: 80f4ae00 800128f5 00000000 804e0f04 00000040 5c200014 00000033 80012915 bce0: 00000020 ef1b7480 cf98bdcc cf98bdc8 cf98bd08 cf98bd5c cf98a000 00000001 bd00: 00000001 802f8011 7fffffff 7fffffff cf98bd50 802f75c3 cf8d3c80 010d010c bd20: 00000001 802447a1 0000010d cf8d3c00 cf98bdcc 00010000 ef1b7480 7fffffff bd40: cf98bdcc cf98bdc8 cf98bd50 802f8283 cf912018 00000001 00000000 ef1b7480 bd60: cf98bddc cf98bddc 00000002 cf98bdc8 804f6b24 cf8486a0 cf98bd90 cf8efb80 bd80: 00000001 cf98bdc8 00000000 802f82db cf970000 80136d85 cf8adc00 80137097 bda0: ef07d308 ef1b74c8 804f6b3d 0000000e ef07d308 00000000 cf8b69c0 804f6b24 bdc0: 00000007 00000000 00000000 00010001 dead4ead ffffffff ffffffff cf98bd60 bde0: cf98bd60 00000000 cf965000 cf964000 cf963000 cf962000 cf961000 cf960000 be00: cf95f000 cf95e000 80f4aca2 00000000 00000008 00000000 80f4abc2 00000e90 be20: 0000000e cf95ee90 00000000 804e0f04 00000000 5c200014 00000000 80012915 be40: 80015141 80f4ae00 00000270 cf970000 cf911010 80249423 00000001 00000000 be60: 8054abc8 000c000b 04410000 00000014 cf848638 00000000 cf970000 cf970040 be80: cf848638 ef36b780 0000008a cf970000 00000000 00000007 804f6b24 ef36b7c0 bea0: 00000400 00000064 00000000 801371db 00000000 804f6b24 00000007 cf970000 bec0: 80313bac 00000000 ffffffff 80137249 ef36b780 80137209 0000008a 80136d0d bee0: e7fddef0 e7fddef0 e7fddef0 e7fddef0 e7fddef0 e7fddef0 e7fddef0 e7fddef0 bf00: e7fddef0 e7fddef0 e7fddef0 e7fddef0 00000001 ef081e08 ef081e04 ef1b7480 bf20: 00000000 ef36b780 00000000 ef36b780 801352d5 00000000 00000000 00000000 bf40: 00000000 801352ed ef081df4 80029395 e7fddef0 00000000 e7fddef0 ef36b780 bf60: 00000000 00000000 dead4ead ffffffff ffffffff cf98bf74 cf98bf74 00000000 bf80: 00000000 dead4ead ffffffff ffffffff cf98bf90 cf98bf90 00000000 ef081df4 bfa0: 80029339 00000000 00000000 8000c1d9 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 e7fddef0 e7fddef0 [<8001285c>] (dma_cache_maint_page+0x3c/0xd4) from [<80012951>] (__dma_page_dev_to_cpu+0x19/0x80) [<80012951>] (__dma_page_dev_to_cpu+0x19/0x80) from [<80249d89>] (ahash_done+0x99/0xb8) [<80249d89>] (ahash_done+0x99/0xb8) from [<802449ff>] (caam_jr_dequeue+0x163/0x178) [<802449ff>] (caam_jr_dequeue+0x163/0x178) from [<802883d1>] (net_rx_action+0x81/0x114) [<802883d1>] (net_rx_action+0x81/0x114) from [<8001b07f>] (__do_softirq+0x8b/0x128) [<8001b07f>] (__do_softirq+0x8b/0x128) from [<8001b185>] (do_softirq+0x31/0x3c) [<8001b185>] (do_softirq+0x31/0x3c) from [<8001b6b5>] (irq_exit+0x4f/0x8e) [<8001b6b5>] (irq_exit+0x4f/0x8e) from [<8000ca01>] (handle_IRQ+0x41/0x60) [<8000ca01>] (handle_IRQ+0x41/0x60) from [<800083e3>] (gic_handle_irq+0x2b/0x44) [<800083e3>] (gic_handle_irq+0x2b/0x44) from [<802f9a9b>] (__irq_svc+0x3b/0x5c) Exception stack(0xcf98bc30 to 0xcf98bc78) bc20: 00000000 00000000 00000001 00000000 bc40: 81573b80 cf98bdcc 00000000 cf98bc88 cf98a018 804d4b80 cf98a000 804deb60 bc60: 800128f5 cf98bc78 802f7d9d 802f7da2 00000133 ffffffff [<802f9a9b>] (__irq_svc+0x3b/0x5c) from [<802f7da2>] (__schedule+0x36/0x24c) [<802f7da2>] (__schedule+0x36/0x24c) from [<802f8011>] (schedule+0x59/0x6c) [<802f8011>] (schedule+0x59/0x6c) from [<802f75c3>] (schedule_timeout+0x13/0x100) [<802f75c3>] (schedule_timeout+0x13/0x100) from [<802f8283>] (wait_for_common+0x9b/0xc4) [<802f8283>] (wait_for_common+0x9b/0xc4) from [<802f82db>] (wait_for_completion_interruptible+0xf/0x20) [<802f82db>] (wait_for_completion_interruptible+0xf/0x20) from [<80136d85>] (do_one_async_hash_op.isra.5+0x19/0x22) [<80136d85>] (do_one_async_hash_op.isra.5+0x19/0x22) from [<80137097>] (__test_hash+0x309/0x3ae) [<80137097>] (__test_hash+0x309/0x3ae) from [<801371db>] (test_hash+0x17/0x44) [<801371db>] (test_hash+0x17/0x44) from [<80137249>] (alg_test_hash+0x41/0x54) [<80137249>] (alg_test_hash+0x41/0x54) from [<80136d0d>] (alg_test+0x129/0x188) [<80136d0d>] (alg_test+0x129/0x188) from [<801352ed>] (cryptomgr_test+0x19/0x34) [<801352ed>] (cryptomgr_test+0x19/0x34) from [<80029395>] (kthread+0x5d/0x6c) [<80029395>] (kthread+0x5d/0x6c) from [<8000c1d9>] (ret_from_fork+0x11/0x38) Code: 3212 0152 eb00 0b02 (5882) 0f92 ---[ end trace 3a9625077c8d21fb ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.19-rt30+ls1+gd62899c9b13f #4 [<800107d9>] (unwind_backtrace+0x1/0x88) from [<8000e4ef>] (show_stack+0xb/0xc) [<8000e4ef>] (show_stack+0xb/0xc) from [<802f6dbd>] (dump_stack+0x4d/0x60) [<802f6dbd>] (dump_stack+0x4d/0x60) from [<8000fee3>] (handle_IPI+0x7f/0xbc) [<8000fee3>] (handle_IPI+0x7f/0xbc) from [<800083f3>] (gic_handle_irq+0x3b/0x44) [<800083f3>] (gic_handle_irq+0x3b/0x44) from [<802f9a9b>] (__irq_svc+0x3b/0x5c) Exception stack(0xef09bfa0 to 0xef09bfe8) bfa0: ffffffed 00000000 010a7000 00000000 ef09a000 ef09a010 80000000 80523390 bfc0: 80003010 410fc075 00000000 00000000 00000008 ef09bfe8 8000cbd1 8000cbd2 bfe0: 60000133 ffffffff [<802f9a9b>] (__irq_svc+0x3b/0x5c) from [<8000cbd2>] (arch_cpu_idle+0x1a/0x20) [<8000cbd2>] (arch_cpu_idle+0x1a/0x20) from [<8003a285>] (cpu_startup_entry+0x7d/0xc4) [<8003a285>] (cpu_startup_entry+0x7d/0xc4) from [<80008485>] (__enable_mmu+0x1/0x1c) Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Change-Id: I1bcaa5a402409a943b47d7e7b3672a081d934a24 Reviewed-on: http://git.am.freescale.net:8181/23427 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11This reverts commit 59d6bf6f6d2a2e99f2234ac572da5a5938fbd352Tang Yuantian
That commit tried to fix the section mismatch warning by moving the clock driver struct to init section. This is definitely wrong because the kernel would free the memories occupied by this struct after boot while this driver is still registered in the driver core. The kernel would panic when accessing this driver struct. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Change-Id: I3061188d09f504c9e1a0d8771a5336477404d016 Reviewed-on: http://git.am.freescale.net:8181/23314 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11Enable power monitor (INA220) feature in defconfig for supported platformsJia Hongtao
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Change-Id: I2f9c391df5ddca31a49a0a3ac0cba380722b7cf0 Reviewed-on: http://git.am.freescale.net:8181/23440 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11Enable thermal monitor feature in defconfig for supported platformsJia Hongtao
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Change-Id: Ifc1ab666fe1ad16c4f01cbf74b088d8df4663e49 Reviewed-on: http://git.am.freescale.net:8181/23439 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Yuantian Tang <yuantian.tang@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11t102xsi-post: update qman according to the revisionHaiying Wang
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Change-Id: I5c7000288297384a04f33906e668f520bafc00d8 Reviewed-on: http://git.am.freescale.net:8181/23308 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Dongsheng Wang <dongsheng.wang@freescale.com> Reviewed-by: Roy Pledge <roy.pledge@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11dce: validate input to test moduleJeffrey Ladouceur
The dce_simple_perf_tester module needs to validate input parameter. Signed-off-by: Jeffrey Ladouceur <Jeffrey.Ladouceur@freescale.com> Change-Id: Ie0dddfb8e23532895e6ec2276f201e3b555fed62 Reviewed-on: http://git.am.freescale.net:8181/22952 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com> Reviewed-by: Roy Pledge <roy.pledge@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAESteven Capper
For LPAE, we have the following means for encoding writable or dirty ptes: L_PTE_DIRTY L_PTE_RDONLY !pte_dirty && !pte_write 0 1 !pte_dirty && pte_write 0 1 pte_dirty && !pte_write 1 1 pte_dirty && pte_write 1 0 So we can't distinguish between writeable clean ptes and read only ptes. This can cause problems with ptes being incorrectly flagged as read only when they are writeable but not dirty. This patch renumbers L_PTE_RDONLY from AP[2] to a software bit #58, and adds additional logic to set AP[2] whenever the pte is read only or not dirty. That way we can distinguish between clean writeable ptes and read only ptes. HugeTLB pages will use this new logic automatically. We need to add some logic to Transparent HugePages to ensure that they correctly interpret the revised pgprot permissions (L_PTE_RDONLY has moved and no longer matches PMD_SECT_AP2). In the process of revising THP, the names of the PMD software bits have been prefixed with L_ to make them easier to distinguish from their hardware bit counterparts. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> (cherry picked from commit ded9477984690d026e46dd75e8157392cea3f13f) Conflicts: arch/arm/mm/dump.c Change-Id: Ia71696dc811c7aeb8596334a26e67c24813a039f Reviewed-on: http://git.am.freescale.net:8181/23333 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11ARM: 8108/1: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclearSteven Capper
Long descriptors on ARM are 64 bits, and some pte functions such as pte_dirty return a bitwise-and of a flag with the pte value. If the flag to be tested resides in the upper 32 bits of the pte, then we run into the danger of the result being dropped if downcast. For example: gather_stats(page, md, pte_dirty(*pte), 1); where pte_dirty(*pte) is downcast to an int. This patch introduces a new macro pte_isset which performs the bitwise and, then performs a double logical invert (where needed) to ensure predictable downcasting. The logical inverse pte_isclear is also introduced. Equivalent pmd functions for Transparent HugePages have also been added. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> (cherry picked from commit f2950706871c4b6e8c0f0d7c3f62d35930b8de63) Change-Id: I2d17ab87a364a3e839c71fab3f4507e722288daf Reviewed-on: http://git.am.freescale.net:8181/23332 Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
2014-12-11ARM: 7985/1: mm: implement pte_accessible for faulting mappingsWill Deacon
The pte_accessible macro can be used to identify page table entries capable of being cached by a TLB. In principle, this differs from pte_present, since PROT_NONE mappings are mapped using invalid entries identified as present and ptes designated as `old' can use either invalid entries or those with the access flag cleared (guaranteed not to be in the TLB). However, there is a race to take care of, as described in 20841405940e ("mm: fix TLB flush race between migration, and change_protection_range"), between a page being migrated and mprotected at the same time. In this case, we can check whether a TLB invalidation is pending for the mm and if so, temporarily consider PROT_NONE mappings as valid. This patch implements a quick pte_accessible macro for ARM by simply checking if the pte is valid/present depending on the mm. For classic MMU, these checks are identical and will generate some false positives for PROT_NONE mappings, but this is better than the current asm-generic definition of ((void)(pte),1). Finally, pte_present_user is moved to use pte_valid (and renamed appropriately) since we don't care about cache flushing for faulting mappings. Acked-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> (cherry picked from commit 1971188aa19651d8f447211c6535fb68661d77c5) Change-Id: I27ad2dbe398483d18ebb587e7c1e65b198421070 Reviewed-on: http://git.am.freescale.net:8181/23331 Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com> Tested-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11ARM: 8037/1: mm: support big-endian page tablesJianguo Wu
When enable LPAE and big-endian in a hisilicon board, while specify mem=384M mem=512M@7680M, will get bad page state: Freeing unused kernel memory: 180K (c0466000 - c0493000) BUG: Bad page state in process init pfn:fa442 page:c7749840 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x40000400(reserved) Modules linked in: CPU: 0 PID: 1 Comm: init Not tainted 3.10.27+ #66 [<c000f5f0>] (unwind_backtrace+0x0/0x11c) from [<c000cbc4>] (show_stack+0x10/0x14) [<c000cbc4>] (show_stack+0x10/0x14) from [<c009e448>] (bad_page+0xd4/0x104) [<c009e448>] (bad_page+0xd4/0x104) from [<c009e520>] (free_pages_prepare+0xa8/0x14c) [<c009e520>] (free_pages_prepare+0xa8/0x14c) from [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) from [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) from [<c00b6458>] (handle_mm_fault+0xf4/0x120) [<c00b6458>] (handle_mm_fault+0xf4/0x120) from [<c0013754>] (do_page_fault+0xfc/0x354) [<c0013754>] (do_page_fault+0xfc/0x354) from [<c0008400>] (do_DataAbort+0x2c/0x90) [<c0008400>] (do_DataAbort+0x2c/0x90) from [<c0008fb4>] (__dabt_usr+0x34/0x40) The bad pfn:fa442 is not system memory(mem=384M mem=512M@7680M), after debugging, I find in page fault handler, will get wrong pfn from pte just after set pte, as follow: do_anonymous_page() { ... set_pte_at(mm, address, page_table, entry); //debug code pfn = pte_pfn(entry); pr_info("pfn:0x%lx, pte:0x%llxn", pfn, pte_val(entry)); //read out the pte just set new_pte = pte_offset_map(pmd, address); new_pfn = pte_pfn(*new_pte); pr_info("new pfn:0x%lx, new pte:0x%llxn", pfn, pte_val(entry)); ... } pfn: 0x1fa4f5, pte:0xc00001fa4f575f new_pfn:0xfa4f5, new_pte:0xc00000fa4f5f5f //new pfn/pte is wrong. The bug is happened in cpu_v7_set_pte_ext(ptep, pte): An LPAE PTE is a 64bit quantity, passed to cpu_v7_set_pte_ext in the r2 and r3 registers. On an LE kernel, r2 contains the LSB of the PTE, and r3 the MSB. On a BE kernel, the assignment is reversed. Unfortunately, the current code always assumes the LE case, leading to corruption of the PTE when clearing/setting bits. This patch fixes this issue much like it has been done already in the cpu_v7_switch_mm case. CC stable <stable@vger.kernel.org> Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> (cherry picked from commit 86f40622af7329375e38f282f6c0aab95f3e5f72) Change-Id: If59198ba23237cc9cb98fa357795c6fece20666a Reviewed-on: http://git.am.freescale.net:8181/23330 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11rtc/ds3232: fix ds3232 get a WARNING trace in resume functionWang Dongsheng
If ds3232 work on some platform that is not implementation irq_set_wake, ds3232 will get a WARNING trace in resume. So fix ds3232->suspended state to false when irq_set_irq_wake return error. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 729 at kernel/irq/manage.c:604 irq_set_irq_wake+0x4b/0x8c() Unbalanced IRQ 201 wake disable Modules linked in: CPU: 0 PID: 729 Comm: sh Not tainted 3.12.19-rt30+ #25 [<800107d9>] (unwind_backtrace+0x1/0x88) from [<8000e4ef>] (show_stack+0xb/0xc) [<8000e4ef>] (show_stack+0xb/0xc) from [<802b5fa9>] (dump_stack+0x4d/0x60) [<802b5fa9>] (dump_stack+0x4d/0x60) from [<800186dd>] (warn_slowpath_common+0x45/0x64) [<800186dd>] (warn_slowpath_common+0x45/0x64) from [<80018717>] (warn_slowpath_fmt+0x1b/0x24) [<80018717>] (warn_slowpath_fmt+0x1b/0x24) from [<8003a8d3>] (irq_set_irq_wake+0x4b/0x8c) [<8003a8d3>] (irq_set_irq_wake+0x4b/0x8c) from [<80204fcb>] (ds3232_resume+0x2d/0x36) [<80204fcb>] (ds3232_resume+0x2d/0x36) from [<801954c7>] (dpm_run_callback.isra.13+0xb/0x28) [<801954c7>] (dpm_run_callback.isra.13+0xb/0x28) from [<80195b1b>] (device_resume+0x7b/0xa2) [<80195b1b>] (device_resume+0x7b/0xa2) from [<80195f0f>] (dpm_resume+0xbb/0x19c) [<80195f0f>] (dpm_resume+0xbb/0x19c) from [<801960d9>] (dpm_resume_end+0x9/0x12) [<801960d9>] (dpm_resume_end+0x9/0x12) from [<80037e1d>] (suspend_devices_and_enter+0x17d/0x1d0) [<80037e1d>] (suspend_devices_and_enter+0x17d/0x1d0) from [<80037ee1>] (pm_suspend+0x71/0x128) [<80037ee1>] (pm_suspend+0x71/0x128) from [<80037449>] (state_store+0x6d/0x80) [<80037449>] (state_store+0x6d/0x80) from [<800af4d5>] (sysfs_write_file+0x9f/0xde) [<800af4d5>] (sysfs_write_file+0x9f/0xde) from [<8007a437>] (vfs_write+0x7b/0x104) [<8007a437>] (vfs_write+0x7b/0x104) from [<8007a7f7>] (SyS_write+0x27/0x48) [<8007a7f7>] (SyS_write+0x27/0x48) from [<8000c121>] (ret_fast_syscall+0x1/0x44) ---[ end trace 640959d2e8de6ccc ]--- Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Change-Id: I45102d4ee48299df4b24ffd85cdd316a9c8598f4 Reviewed-on: http://git.am.freescale.net:8181/23266 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Chenhui Zhao <chenhui.zhao@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11layerscape/pci: fix no EP on pci slot resume function return errornumWang Dongsheng
If no EP device plugin pci slot, kernel should return 0 not error number in pm resume function. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Change-Id: Ibc62d1a0de2f25ebede51ec813c6b36c864f100f Reviewed-on: http://git.am.freescale.net:8181/23265 Reviewed-by: Chenhui Zhao <chenhui.zhao@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11powerpc/t1024: update defconfig and dts for fman_v3l platformShengzhou Liu
- add CONFIG_FMAN_V3L by default for FMan_V3L platform. - t1024 officially supports 6 portals of QMan/BMan instead of 10 - remove CONFIG_ALTIVEC as e5500 core has no ALTIVEC. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I71a5426ad441ef034c66e2d794a86b366092530d Reviewed-on: http://git.am.freescale.net:8181/23188 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11mtd: eLBC NAND: fix subpage write supportPekon Gupta
As subpage write is enabled by default for all drivers, nand_write_subpage_hwecc causes a crash if the driver did not register ecc->hwctl or ecc->calculate. This behavior was introduced in commit 837a6ba4f3b6d23026674e6af6b6849a4634fff9 "mtd: nand: subpage write support for hardware based ECC schemes". This fixes a crash by emulating subpage write support by padding sub-page data with 0xff on either sides to make it full page compatible. Reported-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Scott Wood <scottwood@freescale.com> Cc: <stable@vger.kernel.org> # 3.10.x+ Signed-off-by: Brian Norris <computersforpeace@gmail.com> (cherry picked from commit f034d87def51f026b735d1e2877e9387011b2ba3) Change-Id: I55b0ea1eea0ffdfa6410d0a239e2a773bfdd490d Signed-off-by: Scott Wood <scottwood@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/20798 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11dpa_offload: Fix memory leak in copy_key_descriptor_compatcpyAnca Jeanina Floarea
In case either the byte or the mask of a key are provided NULL, the memory allocated for the lookup key descriptor needs to be release. Signed-off-by: Anca Jeanina Floarea <anca.floarea@freescale.com> Change-Id: Ibb9b7ec28a93a87c82ab318b763866cf3d9f493a Reviewed-on: http://git.am.freescale.net:8181/23131 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Marian-Cornel Chereji <marian.chereji@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11dpa_offload: Avoid dereferencing a NULL pointer in case of corrupted user paramsMarian Chereji
In the dpa_classifier function "try_compatible_node" there are some places where the header manipulation operation flags are compared to the configuration of an existing header manipulation node. The control path however doesn't suspend in case an inconsistency is found in the flags and, in some rare cases when users provide corrupt parameters, there is a danger to dereference a NULL hm_node pointer. Change-Id: I355862c146a228e5878272156adaf92a76391ce6 Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/23111 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Anca Jeanina Floarea <AncaJeanina.Floarea@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11dpa_offload: Avoid double free of replicator group params in case of errorMarian Chereji
In dpa_classifier function "dpa_classif_mcast_create_group" the replicator group params could be freed twice if the function "FM_PCD_FrmReplicSetGroup" fails, for instance. The pointer is now reset at first free so that the second free operation ignores it. Change-Id: I8869db05157f68964bd2a131f6e184f78e64cf8c Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/23108 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Radu-Andrei Bulie <Radu.Bulie@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11Fix cluster calculation issue for checking PCL10 state on e6500Jia Hongtao
Kernel could not get cluster information from device tree on PowerPC. The previous way of cluster calculation could be wrong if all cores of some clusters are disabled. For now PCL10 is only supported on e6500 cores. We hard coded the threads number of each cluster to ensure the cluster calculation is right. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Change-Id: Ia329e48bac1a838828146df9b2caa7f527e329eb Reviewed-on: http://git.am.freescale.net:8181/23177 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Yuantian Tang <yuantian.tang@freescale.com> Reviewed-by: Zhuoyu Zhang <Zhuoyu.Zhang@freescale.com> Reviewed-by: Yang Li <LeoLi@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11Merge remote-tracking branch 'linux-pm/sdk-v1.6.x'Rich Schmitt
2014-12-11deep sleep: save/restore LAW and MP registerTang Yuantian
LAW and MP information need to be backed up, or they will lost when deep sleep wake up. Previously, this is done by uboot. Now moved it to kernel because entry point to kernel when resume is pretty early in uboot. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Change-Id: I4542ddc77bd8d3461cf2e8bf02abeb74fa89e741 Reviewed-on: http://git.am.freescale.net:8181/23147 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Chenhui Zhao <chenhui.zhao@freescale.com> Reviewed-by: Yang Li <LeoLi@freescale.com>
generated by cgit v0.10.2 at 2024-07-04 19:00:38 (GMT)