summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-05rtlwifi: rtl8192ce: Fix too long disable of IRQsOlivier Langlois
commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 upstream. rtl8192ce is disabling for too long the local interrupts during hw initiatialisation when performing scans The observable symptoms in dmesg can be: - underruns from ALSA playback - clock freezes (tstamps do not change for several dmesg entries until irqs are finaly reenabled): [ 250.817669] rtlwifi:rtl_op_config():<0-0-0> 0x100 [ 250.817685] rtl8192ce:_rtl92ce_phy_set_rf_power_state():<0-1-0> IPS Set eRf nic enable [ 250.817732] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817796] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817910] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818024] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818139] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818253] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818367] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:98053f15:10 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtl8192c_common:rtl92c_download_fw():<0-1-0> Firmware Version(49), Signature(0x88c1),Size(32) [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> PairwiseEncAlgorithm = 0 GroupEncAlgorithm = 0 [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> The SECR-value cc [ 250.818472] rtl8192c_common:rtl92c_dm_check_txpower_tracking_thermal_meter():<0-1-0> Schedule TxPowerTracking direct call!! [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> rtl92c_dm_txpower_tracking_callback_thermalmeter [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial pathA ele_d reg0xc80 = 0x40000000, ofdm_index=0xc [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial reg0xa24 = 0x90e1317, cck_index=0xc, ch14 0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf delta 0x1 delta_lck 0x0 delta_iqk 0x0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> <=== [ 250.818472] rtl8192c_common:rtl92c_dm_initialize_txpower_tracking_thermalmeter():<0-1-0> pMgntInfo->txpower_tracking = 1 [ 250.818472] rtl8192ce:rtl92ce_led_control():<0-1-0> ledaction 3 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtlwifi:rtl_ips_nic_on():<0-1-0> before spin_unlock_irqrestore [ 251.154656] PCM: Lost interrupts? [Q]-0 (stream=0, delta=15903, new_hw_ptr=293408, old_hw_ptr=277505) The exact code flow that causes that is: 1. wpa_supplicant send a start_scan request to the nl80211 driver 2. mac80211 module call rtl_op_config with IEEE80211_CONF_CHANGE_IDLE 3. rtl_ips_nic_on is called which disable local irqs 4. rtl92c_phy_set_rf_power_state() is called 5. rtl_ps_enable_nic() is called and hw_init()is executed and then the interrupts on the device are enabled A good solution could be to refactor the code to avoid calling rtl92ce_hw_init() with the irqs disabled but a quick and dirty solution that has proven to work is to reenable the irqs during the function rtl92ce_hw_init(). I think that it is safe doing so since the device interrupt will only be enabled after the init function succeed. Signed-off-by: Olivier Langlois <olivier@trillion01.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05rtlwifi: Fix incorrect return from rtl_ps_enable_nic()Olivier Langlois
commit 2e8c5e56b307271c2dab6f8bfd1d8a3822ca2390 upstream. rtl_ps_enable_nic() is called from loops that will loop until this function returns true or a maximum number of retries is performed. hw_init() returns non-zero on error. In that situation return false to restore the original design intent to retry hw init when it fails. Signed-off-by: Olivier Langlois <olivier@trillion01.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05rtl8187: fix regression on MIPS without coherent DMAStanislaw Gruszka
commit b6213e413a4e0c66548153516b074df14f9d08e0 upstream. This patch fixes regression caused by commit a16dad77634 "MIPS: Fix potencial corruption". That commit fixes one corruption scenario in cost of adding another one, which actually start to cause crashes on Yeeloong laptop when rtl8187 driver is used. For correct DMA read operation on machines without DMA coherence, kernel have to invalidate cache, such it will refill later with new data that device wrote to memory, when that data is needed to process. We can only invalidate full cache line. Hence when cache line includes both dma buffer and some other data (written in cache, but not yet in main memory), the other data can not hit memory due to invalidation. That happen on rtl8187 where struct rtl8187_priv fields are located just before and after small buffers that are passed to USB layer and DMA is performed on them. To fix the problem we align buffers and reserve space after them to make them match cache line. This patch does not resolve all possible MIPS problems entirely, for that we have to assure that we always map cache aligned buffers for DMA, what can be complex or even not possible. But patch fixes visible and reproducible regression and seems other possible corruptions do not happen in practice, since Yeeloong laptop works stable without rtl8187 driver. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=54391 Reported-by: Petr Pisar <petr.pisar@atlas.cz> Bisected-by: Tom Li <biergaizi2009@gmail.com> Reported-and-tested-by: Tom Li <biergaizi2009@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Larry Finger <Larry.Finger@lwfinger.next> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05CIFS: Fix too big maxBuf size for SMB3 mountsPavel Shilovsky
commit 2365c4eaf077c48574ab6f143960048fc0f31518 upstream. SMB3 servers can respond with MaxTransactSize of more than 4M that can cause a memory allocation error returned from kmalloc in a lock codepath. Also the client doesn't support multicredit requests now and allows buffer sizes of 65536 bytes only. Set MaxTransactSize to this maximum supported value. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05cifs: ensure that uncached writes handle unmapped areas correctlyJeff Layton
commit 5d81de8e8667da7135d3a32a964087c0faf5483f upstream. It's possible for userland to pass down an iovec via writev() that has a bogus user pointer in it. If that happens and we're doing an uncached write, then we can end up getting less bytes than we expect from the call to iov_iter_copy_from_user. This is CVE-2014-0069 cifs_iovec_write isn't set up to handle that situation however. It'll blindly keep chugging through the page array and not filling those pages with anything useful. Worse yet, we'll later end up with a negative number in wdata->tailsz, which will confuse the sending routines and cause an oops at the very least. Fix this by having the copy phase of cifs_iovec_write stop copying data in this situation and send the last write as a short one. At the same time, we want to avoid sending a zero-length write to the server, so break out of the loop and set rc to -EFAULT if that happens. This also allows us to handle the case where no address in the iovec is valid. [Note: Marking this for stable on v3.4+ kernels, but kernels as old as v2.6.38 may have a similar problem and may need similar fix] Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05avr32: Makefile: add '-D__linux__' flag for gcc-4.4.7 useChen Gang
commit 8d80390cfc9434d5aa4fb9e5f9768a66b30cb8a6 upstream. For avr32 cross compiler, do not define '__linux__' internally, so it will cause issue with allmodconfig. The related error: CC [M] fs/coda/psdev.o In file included from include/linux/coda.h:64, from fs/coda/psdev.c:45: include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t' The related toolchain version (which only download, not re-compile): [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v Using built-in specs. Target: avr32 Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www .atmel.com/avr Thread model: single gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435) Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05avr32: fix missing module.h causing build failure in mimc200/fram.cPaul Gortmaker
commit 5745d6a41a4f4aec29e2ccd591c6fb09ed73a955 upstream. Causing this: In file included from arch/avr32/boards/mimc200/fram.c:13: include/linux/miscdevice.h:51: error: field 'list' has incomplete type include/linux/miscdevice.h:55: error: expected specifier-qualifier-list before 'mode_t' arch/avr32/boards/mimc200/fram.c:42: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05jbd2: fix use after free in jbd2_journal_start_reserved()Dan Carpenter
commit 92e3b40537707001d17bbad800d150ab04e53bf4 upstream. If start_this_handle() fails then it leads to a use after free of "handle". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05powerpc/powernv: Rework EEH resetGavin Shan
commit 5b2e198e50f6ba57081586b853163ea1bb95f1a8 upstream. When doing reset in order to recover the affected PE, we issue hot reset on PE primary bus if it's not root bus. Otherwise, we issue hot or fundamental reset on root port or PHB accordingly. For the later case, we didn't cover the situation where PE only includes root port and it potentially causes kernel crash upon EEH error to the PE. The patch reworks the logic of EEH reset to improve the code readability and also avoid the kernel crash. Reported-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05powerpc: Set the correct ksp_limit on ppc32 when switching to irq stackKevin Hao
commit 1a18a66446f3f289b05b634f18012424d82aa63a upstream. Guenter Roeck has got the following call trace on a p2020 board: Kernel stack overflow in process eb3e5a00, r1=eb79df90 CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 task: eb3e5a00 ti: c0616000 task.ti: ef440000 NIP: c003a420 LR: c003a410 CTR: c0017518 REGS: eb79dee0 TRAP: 0901 Not tainted (3.13.0-rc8-juniper-00146-g19eca00) MSR: 00029000 <CE,EE,ME> CR: 24008444 XER: 00000000 GPR00: c003a410 eb79df90 eb3e5a00 00000000 eb05d900 00000001 65d87646 00000000 GPR08: 00000000 020b8000 00000000 00000000 44008442 NIP [c003a420] __do_softirq+0x94/0x1ec LR [c003a410] __do_softirq+0x84/0x1ec Call Trace: [eb79df90] [c003a410] __do_softirq+0x84/0x1ec (unreliable) [eb79dfe0] [c003a970] irq_exit+0xbc/0xc8 [eb79dff0] [c000cc1c] call_do_irq+0x24/0x3c [ef441f20] [c00046a8] do_IRQ+0x8c/0xf8 [ef441f40] [c000e7f4] ret_from_except+0x0/0x18 --- Exception: 501 at 0xfcda524 LR = 0x10024900 Instruction dump: 7c781b78 3b40000a 3a73b040 543c0024 3a800000 3b3913a0 7ef5bb78 48201bf9 5463103a 7d3b182e 7e89b92e 7c008146 <3ba00000> 7e7e9b78 48000014 57fff87f Kernel panic - not syncing: kernel stack overflow CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 Call Trace: The reason is that we have used the wrong register to calculate the ksp_limit in commit cbc9565ee826 (powerpc: Remove ksp_limit on ppc64). Just fix it. As suggested by Benjamin Herrenschmidt, also add the C prototype of the function in the comment in order to avoid such kind of errors in the future. Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND ↵Pekon Gupta
is built as module commit 980386d2d6d49e0b42f48550853ef1ad6aa5d79a upstream. Fixes: commit 75d3625e0e86b2d8d77b4e9c6f685fd7ea0d5a96 ARM: OMAP2+: gpmc: add DT bindings for OneNAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for ONENAND driver to probe later. However this does not happen if generic MTD_ONENAND framework is built as module (CONFIG_MTD_ONENAND=m). Therefore, when MTD/ONENAND and MTD/ONENAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board ONENAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_ONENAND=y || CONFIG_MTD_ONENAND=m Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is ↵Pekon Gupta
built as module commit 6b187b21c92b6e2c7e8ef0b450181c37a3f31681 upstream. Fixes: commit bc6b1e7b86f5d8e4a6fc1c0189e64bba4077efe0 ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for NAND driver to probe later. However this does not happen if generic MTD_NAND framework is built as module (CONFIG_MTD_NAND=m). Therefore, when MTD/NAND and MTD/NAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board NAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_NAND=y || CONFIG_MTD_NAND=m Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ARM: 7957/1: add DSB after icache flush in __flush_icache_all()Vinayak Kale
commit 39544ac9df20f73e49fc6b9ac19ff533388c82c0 upstream. Add DSB after icache flush to complete the cache maintenance operation. Signed-off-by: Vinayak Kale <vkale@apm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ARM: 7955/1: spinlock: ensure we have a compiler barrier before sevWill Deacon
commit 7c8746a9eb287642deaad0e7c2cdf482dce5e4be upstream. When unlocking a spinlock, we require the following, strictly ordered sequence of events: <barrier> /* dmb */ <unlock> <barrier> /* dsb */ <sev> Whilst the code does indeed reflect this in terms of the architecture, the final <barrier> + <sev> have been contracted into a single inline asm without a "memory" clobber, therefore the compiler is at liberty to reorder the unlock to the end of the above sequence. In such a case, a waiting CPU may be woken up before the lock has been unlocked, leading to extremely poor performance. This patch reworks the dsb_sev() function to make use of the dsb() macro and ensure ordering against the unlock. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMUWill Deacon
commit bae0ca2bc550d1ec6a118fb8f2696f18c4da3d8e upstream. During __v{6,7}_setup, we invalidate the TLBs since we are about to enable the MMU on return to head.S. Unfortunately, without a subsequent dsb instruction, the invalidation is not guaranteed to have completed by the time we write to the sctlr, potentially exposing us to junk/stale translations cached in the TLB. This patch reworks the init functions so that the dsb used to ensure completion of cache/predictor maintenance is also used to ensure completion of the TLB invalidation. Reported-by: Albin Tonnerre <Albin.Tonnerre@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ARM: dma-mapping: fix GFP_ATOMIC macro usageMarek Szyprowski
commit 10c8562f932d89c030083e15f9279971ed637136 upstream. GFP_ATOMIC is not a single gfp flag, but a macro which expands to the other flags and LACK of __GFP_WAIT flag. To check if caller wanted to perform an atomic allocation, the code must test __GFP_WAIT flag presence. This patch fixes the issue introduced in v3.6-rc5 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ext4: don't leave i_crtime.tv_sec uninitializedTheodore Ts'o
commit 19ea80603715d473600cd993b9987bc97d042e02 upstream. If the i_crtime field is not present in the inode, don't leave the field uninitialized. Fixes: ef7f38359 ("ext4: Add nanosecond timestamps") Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ext4: fix online resize with a non-standard blocks per group settingTheodore Ts'o
commit 3d2660d0c9c2f296837078c189b68a47f6b2e3b5 upstream. The set_flexbg_block_bitmap() function assumed that the number of blocks in a blockgroup was sb->blocksize * 8, which is normally true, but not always! Use EXT4_BLOCKS_PER_GROUP(sb) instead, to fix block bitmap corruption after: mke2fs -t ext4 -g 3072 -i 4096 /dev/vdd 1G mount -t ext4 /dev/vdd /vdd resize2fs /dev/vdd 8G Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reported-by: Jon Bernard <jbernard@tuxion.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ext4: fix online resize with very large inode tablesTheodore Ts'o
commit b93c95353413041a8cebad915a8109619f66bcc6 upstream. If a file system has a large number of inodes per block group, all of the metadata blocks in a flex_bg may be larger than what can fit in a single block group. Unfortunately, ext4_alloc_group_tables() in resize.c was never tested to see if it would handle this case correctly, and there were a large number of bugs which caused the following sequence to result in a BUG_ON: kernel bug at fs/ext4/resize.c:409! ... call trace: [<ffffffff81256768>] ext4_flex_group_add+0x1448/0x1830 [<ffffffff81257de2>] ext4_resize_fs+0x7b2/0xe80 [<ffffffff8123ac50>] ext4_ioctl+0xbf0/0xf00 [<ffffffff811c111d>] do_vfs_ioctl+0x2dd/0x4b0 [<ffffffff811b9df2>] ? final_putname+0x22/0x50 [<ffffffff811c1371>] sys_ioctl+0x81/0xa0 [<ffffffff81676aa9>] system_call_fastpath+0x16/0x1b code: c8 4c 89 df e8 41 96 f8 ff 44 89 e8 49 01 c4 44 29 6d d4 0 rip [<ffffffff81254fa1>] set_flexbg_block_bitmap+0x171/0x180 This can be reproduced with the following command sequence: mke2fs -t ext4 -i 4096 /dev/vdd 1G mount -t ext4 /dev/vdd /vdd resize2fs /dev/vdd 8G To fix this, we need to make sure the right thing happens when a block group's inode table straddles two block groups, which means the following bugs had to be fixed: 1) Not clearing the BLOCK_UNINIT flag in the second block group in ext4_alloc_group_tables --- the was proximate cause of the BUG_ON. 2) Incorrectly determining how many block groups contained contiguous free blocks in ext4_alloc_group_tables(). 3) Incorrectly setting the start of the next block range to be marked in use after a discontinuity in setup_new_flex_group_blocks(). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ext4: don't try to modify s_flags if the the file system is read-onlyTheodore Ts'o
commit 23301410972330c0ae9a8afc379ba2005e249cc6 upstream. If an ext4 file system is created by some tool other than mke2fs (perhaps by someone who has a pathalogical fear of the GPL) that doesn't set one or the other of the EXT2_FLAGS_{UN}SIGNED_HASH flags, and that file system is then mounted read-only, don't try to modify the s_flags field. Otherwise, if dm_verity is in use, the superblock will change, causing an dm_verity failure. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ext4: fix error paths in swap_inode_boot_loader()Zheng Liu
commit 30d29b119ef01776e0a301444ab24defe8d8bef3 upstream. In swap_inode_boot_loader() we forgot to release ->i_mutex and resume unlocked dio for inode and inode_bl if there is an error starting the journal handle. This commit fixes this issue. Reported-by: Ahmed Tamrawi <ahmedtamrawi@gmail.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Dr. Tilmann Bubeck <t.bubeck@reinform.de> Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ext4: fix xfstest generic/299 block validity failuresEric Whitney
commit 15cc17678547676c82a5da9ccf357447333fc342 upstream. Commit a115f749c1 (ext4: remove wait for unwritten extent conversion from ext4_truncate) exposed a bug in ext4_ext_handle_uninitialized_extents(). It can be triggered by xfstest generic/299 when run on a test file system created without a journal. This test continuously fallocates and truncates files to which random dio/aio writes are simultaneously performed by a separate process. The test completes successfully, but if the test filesystem is mounted with the block_validity option, a warning message stating that a logical block has been mapped to an illegal physical block is posted in the kernel log. The bug occurs when an extent is being converted to the written state by ext4_end_io_dio() and ext4_ext_handle_uninitialized_extents() discovers a mapping for an existing uninitialized extent. Although it sets EXT4_MAP_MAPPED in map->m_flags, it fails to set map->m_pblk to the discovered physical block number. Because map->m_pblk is not otherwise initialized or set by this function or its callers, its uninitialized value is returned to ext4_map_blocks(), where it is stored as a bogus mapping in the extent status tree. Since map->m_pblk can accidentally contain illegal values that are larger than the physical size of the file system, calls to check_block_validity() in ext4_map_blocks() that are enabled if the block_validity mount option is used can fail, resulting in the logged warning message. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05drm/i915: Prevent MI_DISPLAY_FLIP straddling two cachelines on IVBVille Syrjälä
commit f66fab8e1cd6b3127ba4c5c0d11539fbe1de1e36 upstream. According to BSpec the entire MI_DISPLAY_FLIP packet must be contained in a single cacheline. Make sure that happens. v2: Use intel_ring_begin_cacheline_safe() v3: Use intel_ring_cacheline_align() (Chris) Cc: Bjoern C <lkml@call-home.ch> Cc: Alexandru DAMIAN <alexandru.damian@intel.com> Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74053 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05drm/i915: Add intel_ring_cachline_align()Ville Syrjälä
commit 753b1ad4a281b0663329409d410243e91825c323 upstream. intel_ring_cachline_align() emits MI_NOOPs until the ring tail is aligned to a cacheline boundary. Cc: Bjoern C <lkml@call-home.ch> Cc: Alexandru DAMIAN <alexandru.damian@intel.com> Cc: Enrico Tagliavini <enrico.tagliavini@gmail.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05drm/nv50/disp: use correct register to determine DP display bppIlia Mirkin
commit a7f1c1e65b68e1e1ab70898528d5977ed68a0a7d upstream. Commit 0a0afd282f ("drm/nv50-/disp: move DP link training to core and train from supervisor") added code that uses the wrong register for computing the display bpp, used for bandwidth calculation. Adjust to use the same register as used by exec_clkcmp and nv50_disp_intr_unk20_2_dp. Reported-by: Torsten Wagner <torsten.wagner@gmail.com> Reported-by: Michael Gulick <mgulick@mathworks.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67628 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05drm/nouveau: set irq_enabled manuallyIlia Mirkin
commit 7d3428cd4b2ad51af86fdbdf8284ca38fa95e601 upstream. Since commit 0fa9061ae8c ("drm/nouveau/mc: handle irq-related setup ourselves"), drm_device->irq_enabled remained unset. This is needed in order to properly wait for a vblank event in the generic drm code. See https://bugs.freedesktop.org/show_bug.cgi?id=74195 Reported-by: Jan Janecek <janjanjanx@gmail.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05drm/radeon/ni: fix typo in dpm sq ramping setupAlex Deucher
commit 21ed4947fdfe19b60a27b84162622e56439c7937 upstream. inverted logic. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05bio-integrity: Fix bio_integrity_verify segment start bugNicholas Bellinger
commit 5837c80e870bc3b12ac6a98cdc9ce7a9522a8fb6 upstream. This patch addresses a bug in bio_integrity_verify() code that has been causing DIF READ verify operations to be silently skipped. The issue is that bio->bi_idx will have been incremented within bio_advance() code in the normal blk_update_request() -> req_bio_endio() completion path, and bio_integrity_verify() is using bio_for_each_segment() which starts the bio segment walk at the current bio->bi_idx. So instead use bio_for_each_segment_all() to always start the bio segment walk from zero, regardless of the current bio->bi_idx value after bio_advance() has been called. (Context change for v3.10.y -> v3.13.y code - nab) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Cc: stable@kernel.dk # >= v3.10 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2014-03-03ALSA: hda - One more Dell headset detection quirkHui Wang
commit 7dca4bc6f34829db50d9723ac3bcd1c6518ee6c3 upstream. On the Dell machines with codec whose Subsystem Id is 0x10280624, no external microphone can be detected when plugging a 3-ring headset. If we add "model=dell-headset-multi" for the snd-hda-intel.ko, the problem will disappear. BugLink: https://bugs.launchpad.net/bugs/1259790 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-03ALSA: hda - Another Dell headset detection quirkHui Wang
commit 0dfb9809e93b60946d1915b554138eb93595860c upstream. On the Dell Inspiron 3045 machine (codec Subsystem Id: 0x10280628), no external microphone can be detected when plugging a 3-ring headset. If we add "model=dell-headset-multi" for the snd-hda-intel.ko, the problem will disappear. BugLink: https://bugs.launchpad.net/hwe-somerville/+bug/1259437 CC: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-03ALSA: hda - A Dell headset detection quirkHui Wang
commit 6c6eb4270c209cd3b46e4f0bb6b6480b53398111 upstream. On the Dell Optiplex 3030 machine (codec Subsystem Id: 0x10280623), no external microphone can be detected when plugging a 3-ring headset. If we add "model=dell-headset-multi" for the snd-hda-intel.ko, the problem will disappear. BugLink: https://bugs.launchpad.net/hwe-somerville/+bug/1259435 CC: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-03ALSA: hda - Fix missing bass speaker on ASUS N550Takashi Iwai
commit a30c9aaa900a5fda21b90d5d6a3eaa3cbf16e330 upstream. The laptop has a built-in speaker on NID 0x1a. It's an LFE only on the right channel, so we need to provide an explicit chmap, too. There might be other surround speakers, but they can fixed in addition at later point, so let's fix the easier bass speaker at first. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65091 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-03ALSA: hda - A casual Dell Headset quirkDavid Henningsson
commit 09d2014fb0c6bcd0bf60f46e890907facd25d22c upstream. You're looking at a casual headset patch, for a specific hardware it will match, and suddenly, the headset jack will work, so please apply this simple quirk! BugLink: https://bugs.launchpad.net/bugs/1253038 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-03ALSA: hda/realtek - Make fixup regs persist after resumeKailang Yang
commit 380702192f616df5b2ba704b85cc479a3da92c91 upstream. Upon suspend / resume, the fixup register settings are lost because sending HDA_FIXUP_ACT_PRE_PROBE is not part of the resume path. Instead, write our registers in response to the HDA_FIXUP_ACT_INIT, which happens after initial probe and upon resume. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-03ALSA: hda - Another Dell headset quirkDavid Henningsson
commit ad8ff99e6beb8708b0bdefd9d5658324e90200f0 upstream. This machine has a multi-function headset jack. BugLink: https://bugs.launchpad.net/bugs/1248856 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-03ALSA: HDA - Limit mic boost and add mute LED for an HP machineDavid Henningsson
commit 8e35cd4ac9967620e03f027f27db18b2e249dcd7 upstream. This machine has a mute LED as well as a noisy internal mic. Hence it needs quirks for both limiting the mic boost as well as enabling the LED. BugLink: https://bugs.launchpad.net/bugs/1248476 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-03ALSA: hda - Add extra chmap for 2.1 outputs on ASUS laptopsTakashi Iwai
commit 8e38395360844806041ea69ab9690f5f174bc40c upstream. ASUS N56VZ and N76VZ laptops have a bass speaker but its output comes only from the right channel. This patch adds the extra chmap specific to these models. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=846531 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-03NFS: Do not set NFS_INO_INVALID_LABEL unless server supports labeled NFSTrond Myklebust
commit fd1defc257e2b12ab69bc0b379105c00eca4e112 upstream. Commit aa9c2669626c (NFS: Client implementation of Labeled-NFS) introduces a performance regression. When nfs_zap_caches_locked is called, it sets the NFS_INO_INVALID_LABEL flag irrespectively of whether or not the NFS server supports security labels. Since that flag is never cleared, it means that all calls to nfs_revalidate_inode() will now trigger an on-the-wire GETATTR call. This patch ensures that we never set the NFS_INO_INVALID_LABEL unless the server advertises support for labeled NFS. It also causes nfs_setsecurity() to clear NFS_INO_INVALID_LABEL when it has successfully set the security label for the inode. Finally it gets rid of the NFS_INO_INVALID_LABEL cruft from nfs_update_inode, which has nothing to do with labeled NFS. Reported-by: Neil Brown <neilb@suse.de> Cc: stable@vger.kernel.org # 3.11+ Tested-by: Neil Brown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-01Btrfs: fix data corruption when reading/updating compressed extentsFilipe David Borba Manana
commit a2aa75e18a21b21952dc6daa9bac7c9f4426f81f upstream. When using a mix of compressed file extents and prealloc extents, it is possible to fill a page of a file with random, garbage data from some unrelated previous use of the page, instead of a sequence of zeroes. A simple sequence of steps to get into such case, taken from the test case I made for xfstests, is: _scratch_mkfs _scratch_mount "-o compress-force=lzo" $XFS_IO_PROG -f -c "pwrite -S 0x06 -b 18670 266978 18670" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "falloc 26450 665194" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "truncate 542872" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar This results in the following file items in the fs tree: item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160 inode generation 6 transid 6 size 542872 block group 0 mode 100600 item 5 key (257 INODE_REF 256) itemoff 15863 itemsize 16 inode ref index 2 namelen 6 name: foobar item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53 extent data disk byte 0 nr 0 gen 6 extent data offset 0 nr 24576 ram 266240 extent compression 0 item 7 key (257 EXTENT_DATA 24576) itemoff 15757 itemsize 53 prealloc data disk byte 12849152 nr 241664 gen 6 prealloc data offset 0 nr 241664 item 8 key (257 EXTENT_DATA 266240) itemoff 15704 itemsize 53 extent data disk byte 12845056 nr 4096 gen 6 extent data offset 0 nr 20480 ram 20480 extent compression 2 item 9 key (257 EXTENT_DATA 286720) itemoff 15651 itemsize 53 prealloc data disk byte 13090816 nr 405504 gen 6 prealloc data offset 0 nr 258048 The on disk extent at offset 266240 (which corresponds to 1 single disk block), contains 5 compressed chunks of file data. Each of the first 4 compress 4096 bytes of file data, while the last one only compresses 3024 bytes of file data. Therefore a read into the file region [285648 ; 286720[ (length = 4096 - 3024 = 1072 bytes) should always return zeroes (our next extent is a prealloc one). The solution here is the compression code path to zero the remaining (untouched) bytes of the last page it uncompressed data into, as the information about how much space the file data consumes in the last page is not known in the upper layer fs/btrfs/extent_io.c:__do_readpage(). In __do_readpage we were correctly zeroing the remainder of the page but only if it corresponds to the last page of the inode and if the inode's size is not a multiple of the page size. This would cause not only returning random data on reads, but also permanently storing random data when updating parts of the region that should be zeroed. For the example above, it means updating a single byte in the region [285648 ; 286720[ would store that byte correctly but also store random data on disk. A test case for xfstests follows soon. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-01Btrfs: fix tree mod loggingFilipe David Borba Manana
commit 5de865eebb8330eee19c37b31fb6f315a09d4273 upstream. While running the test btrfs/004 from xfstests in a loop, it failed about 1 time out of 20 runs in my desktop. The failure happened in the backref walking part of the test, and the test's error message was like this: btrfs/004 93s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2013-11-26 18:25:29.263333714 +0000 +++ /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad 2013-12-10 15:25:10.327518516 +0000 @@ -1,3 +1,8 @@ QA output created by 004 *** test backref walking -*** done +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 +expected inum: 405, expected address: 454656, file: /home/fdmanana/btrfs-tests/scratch_1/snap1/p0/d6/d3d/d156/fce, got: + ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests_2/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 Failures: btrfs/004 Failed 1 of 1 tests But immediately after the test finished, the btrfs inspect-internal command returned the expected output: $ btrfs inspect-internal logical-resolve -P 141512704 /home/fdmanana/btrfs-tests/scratch_1 inode 405 offset 454656 root 258 inode 405 offset 454656 root 5 It turned out this was because the btrfs_search_old_slot() calls performed during backref walking (backref.c:__resolve_indirect_ref) were not finding anything. The reason for this turned out to be that the tree mod logging code was not logging some node multi-step operations atomically, therefore btrfs_search_old_slot() callers iterated often over an incomplete tree that wasn't fully consistent with any tree state from the past. Besides missing items, this often (but not always) resulted in -EIO errors during old slot searches, reported in dmesg like this: [ 4299.933936] ------------[ cut here ]------------ [ 4299.933949] WARNING: CPU: 0 PID: 23190 at fs/btrfs/ctree.c:1343 btrfs_search_old_slot+0x57b/0xab0 [btrfs]() [ 4299.933950] Modules linked in: btrfs raid6_pq xor pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep rfcomm bluetooth parport_pc ppdev binfmt_misc joydev snd_hda_codec_h [ 4299.933977] CPU: 0 PID: 23190 Comm: btrfs Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [ 4299.933978] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4, BIOS P1.50 09/04/2012 [ 4299.933979] 000000000000053f ffff8806f3fd98f8 ffffffff8176d284 0000000000000007 [ 4299.933982] 0000000000000000 ffff8806f3fd9938 ffffffff8104a81c ffff880659c64b70 [ 4299.933984] ffff880659c643d0 ffff8806599233d8 ffff880701e2e938 0000160000000000 [ 4299.933987] Call Trace: [ 4299.933991] [<ffffffff8176d284>] dump_stack+0x55/0x76 [ 4299.933994] [<ffffffff8104a81c>] warn_slowpath_common+0x8c/0xc0 [ 4299.933997] [<ffffffff8104a86a>] warn_slowpath_null+0x1a/0x20 [ 4299.934003] [<ffffffffa065d3bb>] btrfs_search_old_slot+0x57b/0xab0 [btrfs] [ 4299.934005] [<ffffffff81775f3b>] ? _raw_read_unlock+0x2b/0x50 [ 4299.934010] [<ffffffffa0655001>] ? __tree_mod_log_search+0x81/0xc0 [btrfs] [ 4299.934019] [<ffffffffa06dd9b0>] __resolve_indirect_refs+0x130/0x5f0 [btrfs] [ 4299.934027] [<ffffffffa06a21f1>] ? free_extent_buffer+0x61/0xc0 [btrfs] [ 4299.934034] [<ffffffffa06de39c>] find_parent_nodes+0x1fc/0xe40 [btrfs] [ 4299.934042] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934048] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934056] [<ffffffffa06df980>] iterate_extent_inodes+0xe0/0x250 [btrfs] [ 4299.934058] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [ 4299.934065] [<ffffffffa06dfb82>] iterate_inodes_from_logical+0x92/0xb0 [btrfs] [ 4299.934071] [<ffffffffa06b13e0>] ? defrag_lookup_extent+0xe0/0xe0 [btrfs] [ 4299.934078] [<ffffffffa06b7015>] btrfs_ioctl+0xf65/0x1f60 [btrfs] [ 4299.934080] [<ffffffff811658b8>] ? handle_mm_fault+0x278/0xb00 [ 4299.934083] [<ffffffff81075563>] ? up_read+0x23/0x40 [ 4299.934085] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [ 4299.934088] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [ 4299.934090] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [ 4299.934093] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [ 4299.934096] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [ 4299.934098] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [ 4299.934100] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934102] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [ 4299.934104] ---[ end trace 48f0cfc902491414 ]--- [ 4299.934378] btrfs bad fsid on block 0 These tree mod log operations that must be performed atomically, tree_mod_log_free_eb, tree_mod_log_eb_copy, tree_mod_log_insert_root and tree_mod_log_insert_move, used to be performed atomically before the following commit: c8cc6341653721b54760480b0d0d9b5f09b46741 (Btrfs: stop using GFP_ATOMIC for the tree mod log allocations) That change removed the atomicity of such operations. This patch restores the atomicity while still not doing the GFP_ATOMIC allocations of tree_mod_elem structures, so it has to do the allocations using GFP_NOFS before acquiring the mod log lock. This issue has been experienced by several users recently, such as for example: http://www.spinics.net/lists/linux-btrfs/msg28574.html After running the btrfs/004 test for 679 consecutive iterations with this patch applied, I didn't ran into the issue anymore. Cc: stable@vger.kernel.org Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-01Btrfs: return immediately if tree log mod is not necessaryFilipe David Borba Manana
commit 783577663507411e36e459390ef056556e93ef29 upstream. In ctree.c:tree_mod_log_set_node_key() we were calling __tree_mod_log_insert_key() even when the modification doesn't need to be logged. This would allocate a tree_mod_elem structure, fill it and pass it to __tree_mod_log_insert(), which would just acquire the tree mod log write lock and then free the tree_mod_elem structure and return (that is, a no-op). Therefore call tree_mod_log_insert() instead of __tree_mod_log_insert() which just returns immediately if the modification doesn't need to be logged (without allocating the structure, fill it, acquire write lock, free structure). Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26perf: Enforce 1 as lower limit for perf_event_max_sample_rateKnut Petersen
commit 723478c8a471403c53cf144999701f6e0c4bbd11 upstream. /proc/sys/kernel/perf_event_max_sample_rate will accept negative values as well as 0. Negative values are unreasonable, and 0 causes a divide by zero exception in perf_proc_update_handler. This patch enforces a lower limit of 1. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5242DB0C.4070005@t-online.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26net: use __GFP_NORETRY for high order allocationsEric Dumazet
[ Upstream commit ed98df3361f059db42786c830ea96e2d18b8d4db ] sock_alloc_send_pskb() & sk_page_frag_refill() have a loop trying high order allocations to prepare skb with low number of fragments as this increases performance. Problem is that under memory pressure/fragmentation, this can trigger OOM while the intent was only to try the high order allocations, then fallback to order-0 allocations. We had various reports from unexpected regressions. According to David, setting __GFP_NORETRY should be fine, as the asynchronous compaction is still enabled, and this will prevent OOM from kicking as in : CFSClientEventm invoked oom-killer: gfp_mask=0x42d0, order=3, oom_adj=0, oom_score_adj=0, oom_score_badness=2 (enabled),memcg_scoring=disabled CFSClientEventm Call Trace: [<ffffffff8043766c>] dump_header+0xe1/0x23e [<ffffffff80437a02>] oom_kill_process+0x6a/0x323 [<ffffffff80438443>] out_of_memory+0x4b3/0x50d [<ffffffff8043a4a6>] __alloc_pages_may_oom+0xa2/0xc7 [<ffffffff80236f42>] __alloc_pages_nodemask+0x1002/0x17f0 [<ffffffff8024bd23>] alloc_pages_current+0x103/0x2b0 [<ffffffff8028567f>] sk_page_frag_refill+0x8f/0x160 [<ffffffff80295fa0>] tcp_sendmsg+0x560/0xee0 [<ffffffff802a5037>] inet_sendmsg+0x67/0x100 [<ffffffff80283c9c>] __sock_sendmsg_nosec+0x6c/0x90 [<ffffffff80283e85>] sock_sendmsg+0xc5/0xf0 [<ffffffff802847b6>] __sys_sendmsg+0x136/0x430 [<ffffffff80284ec8>] sys_sendmsg+0x88/0x110 [<ffffffff80711472>] system_call_fastpath+0x16/0x1b Out of Memory: Kill process 2856 (bash) score 9999 or sacrifice child Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26net: ip, ipv6: handle gso skbs in forwarding pathFlorian Westphal
commit fe6cc55f3a9a053482a76f5a6b2257cee51b4663 upstream. Marcelo Ricardo Leitner reported problems when the forwarding link path has a lower mtu than the incoming one if the inbound interface supports GRO. Given: Host <mtu1500> R1 <mtu1200> R2 Host sends tcp stream which is routed via R1 and R2. R1 performs GRO. In this case, the kernel will fail to send ICMP fragmentation needed messages (or pkt too big for ipv6), as GSO packets currently bypass dstmtu checks in forward path. Instead, Linux tries to send out packets exceeding the mtu. When locking route MTU on Host (i.e., no ipv4 DF bit set), R1 does not fragment the packets when forwarding, and again tries to send out packets exceeding R1-R2 link mtu. This alters the forwarding dstmtu checks to take the individual gso segment lengths into account. For ipv6, we send out pkt too big error for gso if the individual segments are too big. For ipv4, we either send icmp fragmentation needed, or, if the DF bit is not set, perform software segmentation and let the output path create fragments when the packet is leaving the machine. It is not 100% correct as the error message will contain the headers of the GRO skb instead of the original/segmented one, but it seems to work fine in my (limited) tests. Eric Dumazet suggested to simply shrink mss via ->gso_size to avoid sofware segmentation. However it turns out that skb_segment() assumes skb nr_frags is related to mss size so we would BUG there. I don't want to mess with it considering Herbert and Eric disagree on what the correct behavior should be. Hannes Frederic Sowa notes that when we would shrink gso_size skb_segment would then also need to deal with the case where SKB_MAX_FRAGS would be exceeded. This uses sofware segmentation in the forward path when we hit ipv4 non-DF packets and the outgoing link mtu is too small. Its not perfect, but given the lack of bug reports wrt. GRO fwd being broken this is a rare case anyway. Also its not like this could not be improved later once the dust settles. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26net: core: introduce netif_skb_dev_featuresFlorian Westphal
commit d206940319c41df4299db75ed56142177bb2e5f6 upstream. Will be used by upcoming ipv4 forward path change that needs to determine feature mask using skb->dst->dev instead of skb->dev. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26net: add and use skb_gso_transport_seglen()Florian Westphal
commit de960aa9ab4decc3304959f69533eef64d05d8e8 upstream. This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to skbuff core so it may be reused by upcoming ip forwarding path patch. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26net: sctp: fix sctp_connectx abi for ia32 emulation/compat modeDaniel Borkmann
[ Upstream commit ffd5939381c609056b33b7585fb05a77b4c695f3 ] SCTP's sctp_connectx() abi breaks for 64bit kernels compiled with 32bit emulation (e.g. ia32 emulation or x86_x32). Due to internal usage of 'struct sctp_getaddrs_old' which includes a struct sockaddr pointer, sizeof(param) check will always fail in kernel as the structure in 64bit kernel space is 4bytes larger than for user binaries compiled in 32bit mode. Thus, applications making use of sctp_connectx() won't be able to run under such circumstances. Introduce a compat interface in the kernel to deal with such situations by using a 'struct compat_sctp_getaddrs_old' structure where user data is copied into it, and then sucessively transformed into a 'struct sctp_getaddrs_old' structure with the help of compat_ptr(). That fixes sctp_connectx() abi without any changes needed in user space, and lets the SCTP test suite pass when compiled in 32bit and run on 64bit kernels. Fixes: f9c67811ebc0 ("sctp: Fix regression introduced by new sctp_connectx api") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26ipv4: fix counter in_slow_totDuan Jiong
[ Upstream commit a6254864c08109c66a194612585afc0439005286 ] since commit 89aef8921bf("ipv4: Delete routing cache."), the counter in_slow_tot can't work correctly. The counter in_slow_tot increase by one when fib_lookup() return successfully in ip_route_input_slow(), but actually the dst struct maybe not be created and cached, so we can increase in_slow_tot after the dst struct is created. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26bonding: 802.3ad: make aggregator_identifier bond-privateJiri Bohac
[ Upstream commit 163c8ff30dbe473abfbb24a7eac5536c87f3baa9 ] aggregator_identifier is used to assign unique aggregator identifiers to aggregators of a bond during device enslaving. aggregator_identifier is currently a global variable that is zeroed in bond_3ad_initialize(). This sequence will lead to duplicate aggregator identifiers for eth1 and eth3: create bond0 change bond0 mode to 802.3ad enslave eth0 to bond0 //eth0 gets agg id 1 enslave eth1 to bond0 //eth1 gets agg id 2 create bond1 change bond1 mode to 802.3ad enslave eth2 to bond1 //aggregator_identifier is reset to 0 //eth2 gets agg id 1 enslave eth3 to bond0 //eth3 gets agg id 2 Fix this by making aggregator_identifier private to the bond. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-26usbnet: remove generic hard_header_len checkEmil Goode
[ Upstream commit eb85569fe2d06c2fbf4de7b66c263ca095b397aa ] This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
generated by cgit v0.10.2 at 2024-08-25 11:03:43 (GMT)