| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6
* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
lxfb: Maintain video processor palette through suspend/resume
video: da8xx: Register IRQ as last thing in driver probing.
framebuffer: fix fbcmap.c kernel-doc warning
|
|
Implement asm/syscall.h for the MN10300 arch.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: length resolution should be reported units/mm
HID: add support for F430 Force Feedback Wheel
HID: egalax: Use kzalloc
HID: Remove KERN_DEBUG from dbg_hid use
Manually fixed trivial conflict in drivers/hid/hid-input.c (due to
removal of KERN_DEBUG from dbg_hid use clashing with new keycode
interface switch)
|
|
If a user manages to trigger an oops with fs set to KERNEL_DS, fs is not
otherwise reset before do_exit(). do_exit may later (via mm_release in
fork.c) do a put_user to a user-controlled address, potentially allowing
a user to leverage an oops into a controlled write into kernel memory.
This is only triggerable in the presence of another bug, but this
potentially turns a lot of DoS bugs into privilege escalations, so it's
worth fixing. I have proof-of-concept code which uses this bug along
with CVE-2010-3849 to write a zero to an arbitrary kernel address, so
I've tested that this is not theoretical.
A more logical place to put this fix might be when we know an oops has
occurred, before we call do_exit(), but that would involve changing
every architecture, in multiple places.
Let's just stick it in do_exit instead.
[akpm@linux-foundation.org: update code comment]
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
commit 62b61f611e ("ksm: memory hotremove migration only") caused the
following new lockdep warning.
=======================================================
[ INFO: possible circular locking dependency detected ]
-------------------------------------------------------
bash/1621 is trying to acquire lock:
((memory_chain).rwsem){.+.+.+}, at: [<ffffffff81079339>]
__blocking_notifier_call_chain+0x69/0xc0
but task is already holding lock:
(ksm_thread_mutex){+.+.+.}, at: [<ffffffff8113a3aa>]
ksm_memory_callback+0x3a/0xc0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (ksm_thread_mutex){+.+.+.}:
[<ffffffff8108b70a>] lock_acquire+0xaa/0x140
[<ffffffff81505d74>] __mutex_lock_common+0x44/0x3f0
[<ffffffff81506228>] mutex_lock_nested+0x48/0x60
[<ffffffff8113a3aa>] ksm_memory_callback+0x3a/0xc0
[<ffffffff8150c21c>] notifier_call_chain+0x8c/0xe0
[<ffffffff8107934e>] __blocking_notifier_call_chain+0x7e/0xc0
[<ffffffff810793a6>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff813afbfb>] memory_notify+0x1b/0x20
[<ffffffff81141b7c>] remove_memory+0x1cc/0x5f0
[<ffffffff813af53d>] memory_block_change_state+0xfd/0x1a0
[<ffffffff813afd62>] store_mem_state+0xe2/0xf0
[<ffffffff813a0bb0>] sysdev_store+0x20/0x30
[<ffffffff811bc116>] sysfs_write_file+0xe6/0x170
[<ffffffff8114f398>] vfs_write+0xc8/0x190
[<ffffffff8114fc14>] sys_write+0x54/0x90
[<ffffffff810028b2>] system_call_fastpath+0x16/0x1b
-> #0 ((memory_chain).rwsem){.+.+.+}:
[<ffffffff8108b5ba>] __lock_acquire+0x155a/0x1600
[<ffffffff8108b70a>] lock_acquire+0xaa/0x140
[<ffffffff81506601>] down_read+0x51/0xa0
[<ffffffff81079339>] __blocking_notifier_call_chain+0x69/0xc0
[<ffffffff810793a6>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff813afbfb>] memory_notify+0x1b/0x20
[<ffffffff81141f1e>] remove_memory+0x56e/0x5f0
[<ffffffff813af53d>] memory_block_change_state+0xfd/0x1a0
[<ffffffff813afd62>] store_mem_state+0xe2/0xf0
[<ffffffff813a0bb0>] sysdev_store+0x20/0x30
[<ffffffff811bc116>] sysfs_write_file+0xe6/0x170
[<ffffffff8114f398>] vfs_write+0xc8/0x190
[<ffffffff8114fc14>] sys_write+0x54/0x90
[<ffffffff810028b2>] system_call_fastpath+0x16/0x1b
But it's a false positive. Both memory_chain.rwsem and ksm_thread_mutex
have an outer lock (mem_hotplug_mutex). So they cannot deadlock.
Thus, This patch annotate ksm_thread_mutex is not deadlock source.
[akpm@linux-foundation.org: update comment, from Hugh]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Presently hwpoison is using lock_system_sleep() to prevent a race with
memory hotplug. However lock_system_sleep() is a no-op if
CONFIG_HIBERNATION=n. Therefore we need a new lock.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
->releasepage() does not remove the page from the mapping.
Acked-by: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On stock 2.6.37-rc4, running:
# mount lilith:/export /mnt/lilith
# find /mnt/lilith/ -type f -print0 | xargs -0 file
crashes the machine fairly quickly under Xen. Often it results in oops
messages, but the couple of times I tried just now, it just hung quietly
and made Xen print some rude messages:
(XEN) mm.c:2389:d80 Bad type (saw 7400000000000001 != exp
3000000000000000) for mfn 1d7058 (pfn 18fa7)
(XEN) mm.c:964:d80 Attempt to create linear p.t. with write perms
(XEN) mm.c:2389:d80 Bad type (saw 7400000000000010 != exp
1000000000000000) for mfn 1d2e04 (pfn 1d1fb)
(XEN) mm.c:2965:d80 Error while pinning mfn 1d2e04
Which means the domain tried to map a pagetable page RW, which would
allow it to map arbitrary memory, so Xen stopped it. This is because
vm_unmap_ram() left some pages mapped in the vmalloc area after NFS had
finished with them, and those pages got recycled as pagetable pages
while still having these RW aliases.
Removing those mappings immediately removes the Xen-visible aliases, and
so it has no problem with those pages being reused as pagetable pages.
Deferring the TLB flush doesn't upset Xen because it can flush the TLB
itself as needed to maintain its invariants.
When unmapping a region in the vmalloc space, clear the ptes
immediately. There's no point in deferring this because there's no
amortization benefit.
The TLBs are left dirty, and they are flushed lazily to amortize the
cost of the IPIs.
This specific motivation for this patch is an oops-causing regression
since 2.6.36 when using NFS under Xen, triggered by the NFS client's use
of vm_map_ram() introduced in 56e4ebf877b60 ("NFS: readdir with vmapped
pages") . XFS also uses vm_map_ram() and could cause similar problems.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The AMD Geode CS5536 Companion Device Silicon Revision B1 Specification
Update mentions the follow as issue #36:
"Atomic write transactions to the atomic GPIO High Bank Feature Bit
registers should only affect the bits selected [...]"
"after Suspend, an atomic write transaction [...] will clear all
non-selected bits of the accessed register."
In other words, writing to the high bank for a single GPIO bit will
clear every other GPIO bit (but only sometimes after a suspend).
The workaround described is obvious and simple; do a read-modify-write.
This patch does that, and documents why we're doing it.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
reiserfs_acl_chmod() can be called by reiserfs_set_attr() and then take
the reiserfs lock a second time. Thereafter it may call journal_begin()
that definitely requires the lock not to be nested in order to release
it before taking the journal mutex because the reiserfs lock depends on
the journal mutex already.
So, aviod nesting the lock in reiserfs_acl_chmod().
Reported-by: Pawel Zawora <pzawora@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Pawel Zawora <pzawora@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: <stable@kernel.org> [2.6.32.x+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's not useful to build LED triggers when there's no LEDs that can be
triggered by them. Therefore, fix up the dependencies so that this
cannot happen, and fix a few users that select triggers to depend on
LEDS_CLASS as well (there is also one user that also selects LEDS_CLASS,
which is OK).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Arnd Hannemann <arnd@arndnet.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The nr_dirty_[background_]threshold fields are misplaced before the
numa_* fields, and users will read strange values.
This is the right order. Before patch, nr_dirty_background_threshold
will read as 0 (the value from numa_miss).
numa_hit 128501
numa_miss 0
numa_foreign 0
numa_interleave 7388
numa_local 128501
numa_other 0
nr_dirty_threshold 144291
nr_dirty_background_threshold 72145
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Michael Rubin <mrubin@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
find_task_by_vpid() should be protected by rcu_read_lock(), to prevent
free_pid() reclaiming pid.
Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Have hugetlb_fault() call unlock_page(page) only if it had previously
called lock_page(page).
Setting CONFIG_DEBUG_VM=y and then running the libhugetlbfs test suite,
resulted in the tripping of VM_BUG_ON(!PageLocked(page)) in
unlock_page() having been called by hugetlb_fault() when page ==
pagecache_page. This patch remedied the problem.
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (27 commits)
Staging: rt2870: Add USB ID for Buffalo Airstation WLI-UC-GN
staging: easycap needs smp_lock.h, fixes build error
Staging: batman-adv: ensure that eth_type_trans gets linear memory
Staging: batman-adv: Don't remove interface with spinlock held
staging: brcm80211: updated maintainers contact information
staging: fix winbond build, needs delay.h
Staging: line6: fix up my fixup for some sysfs attribute permissions
Staging: zram: fix up my fixup for some sysfs attribute permissions
Staging: udlfb: fix up my fixup for some sysfs attribute permissions
Staging: samsung-laptop: fix up my fixup for some sysfs attribute permissions
Staging: iio: adis16220: fix up my fixup for some sysfs attribute permissions
Staging: frontier: fix up my fixup for some sysfs attribute permissions
Staging: asus_oled: fix up my fixup for some sysfs attribute permissions
staging: spectra: fix build error
Staging: intel_sst: fix memory leak
Staging: rtl8712: signedness bug in init
staging: rtl8187se: Change panic to warn when RF switch turned off
staging: comedi: fix memory leak
Staging: quickstart: free after input_unregister_device()
Staging: speakup: free after input_unregister_device()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
uio: Change mail address of Hans J. Koch
driver core: prune docs about device_interface
driver core: the development tree has switched to git
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
serial: mfd: adjust the baud rate setting
TTY: open/hangup race fixup
TTY: don't allow reopen when ldisc is changing
NET: wan/x25, fix ldisc->open retval
TTY: ldisc, fix open flag handling
serial8250: Mark console as CON_ANYTIME
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: fix autosuspend bug in usb-serial
USB: ehci: disable LPM and PPCD for nVidia MCP89 chips
USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID added
USB: yurex: add .llseek fop to file_operations
USB: ftdi_sio: Add ID for RT Systems USB-29B radio cable
usb: musb: do not use dma for control transfers
usb: musb: gadget: fix compilation warning
usb: musb: clear RXCSR_AUTOCLEAR before PIO read
usb: musb: unmap dma buffer when switching to PIO
xhci: Don't let the USB core disable SuperSpeed ports.
xhci: Setup array of USB 2.0 and USB 3.0 ports.
xhci: Fix reset-device and configure-endpoint commands
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
watchdog: it8712f_wdt: add note to Kconfig
watchdog: gef_wdt: include fs.h
watchdog: bcm63xx_wdt: improve platform part.
watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg PCH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB: Fix information leak in marshalling code
IB/pack: Remove some unused code added by the IBoE patches
IB/mlx4: Fix IBoE link state
IB/mlx4: Fix IBoE reported link rate
mlx4_core: Workaround firmware bug in query dev cap
IB/mlx4: Fix memory ordering of VLAN insertion control bits
MAINTAINERS: Update NetEffect entry
|
|
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: only run xfs_error_test if error injection is active
xfs: avoid moving stale inodes in the AIL
xfs: delayed alloc blocks beyond EOF are valid after writeback
xfs: push stale, pinned buffers on trylock failures
xfs: fix failed write truncation handling.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator: fix kernel-doc for set_consumer_device_supply
regulator: enable supply regulator only when use count is zero
regulator: twl-regulator - fix twlreg_set_mode
regulator: lock supply in regulator enable
regulator: Return proper error for regulator_register()
regulator: Ensure enough delay time for enabling regulator
regulator: Remove a redundant device_remove_file call in create_regulator
regulator: Staticise mc13783_powermisc_rmw()
regulator: regulator disable supply fix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
[media] v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functions
[media] v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev* (2)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'rbd-sysfs' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: replace the rbd sysfs interface
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: fix parsing of hostname in dfs referrals
cifs: display fsc in /proc/mounts
cifs: enable fscache iff fsc mount option is used explicitly
cifs: allow fsc mount option only if CONFIG_CIFS_FSCACHE is set
cifs: Handle extended attribute name cifs_acl to generate cifs acl blob (try #4)
cifs: Misc. cleanup in cifsacl handling [try #4]
cifs: trivial comment fix for cifs_invalidate_mapping
[CIFS] fs/cifs/Kconfig: CIFS depends on CRYPTO_HMAC
cifs: don't take extra tlink reference in initiate_cifs_search
cifs: Percolate error up to the caller during get/set acls [try #4]
cifs: fix another memleak, in cifs_root_iget
cifs: fix potential use-after-free in cifs_oplock_break_put
|
|
On some motherboards the it8712f watchdog does not work unless
the game port was enabled. see Bug 13140. We therefor add a note
to Kconfig.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Add missing include "linux/fs.h".
This fixes compile failure.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
* fix devinit and devexit sections
* fix platform removal code so that the iounmap happens after the removal of the timer.
* changes the reboot_notifier by a platform shutdown method.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
This patch adds an additional LPC Controller DeviceID for the Intel Patsburg PCH for TCO Watchdog.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Input ABI requires reporting resolution on main axes in units per
millimeter, not units per inch, so we need to convert accordingly.
Tested-by: Nikolai Kondrashov <spbnick@gmail.com>
Acked-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
|
|
ib_ucm_init_qp_attr() and ucma_init_qp_attr() pass struct ib_uverbs_qp_attr
with reserved, qp_state, {ah_attr,alt_ah_attr}{reserved,->grh.reserved}
fields uninitialized to copy_to_user(). This leads to leaking of
contents of kernel stack memory to userspace.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
Remove unused functions added by commit ff7f5aab354d ("IB/pack: IBoE UD
packet packing support").
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
|
|
Use netif_running() and netif_carrier_ok() to report link state,
exactly as is done to report Ethernet link state in sysfs.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
The link rate is the product of the link speed in the link width. For
Etherent ports the rate is 10G, so we use 1 for the width and 4 for
speed to get the correct rate.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
ConnectX firmware is supposed to report the number blue flame
registers per page as log2 of the value. However, due to a firmware
bug, it reports actual number. This patch works around this by
checking if the number of registers calculated fits within a page. If
it does not, we use 8 registers per page.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
The new interface creates directories per mapped image
and under each it creates a subdir per available snapshot.
This allows keeping a cleaner interface within the sysfs
guidelines. The ABI documentation was updated too.
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We must fully update the control segment before marking it as valid,
so that hardware doesn't start executing it before we're ready.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
[ Move VLAN control bit setting to before wmb(). - Roland ]
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
Correct web link as www.neteffect.com is no longer valid. Remove
Chien Tung as maintainer. I am moving on to other responsibilities at
Intel. Thanks for all the fish.
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
Recent tests writing lots of small files showed the flusher thread
being CPU bound and taking a long time to do allocations on a debug
kernel. perf showed this as the prime reason:
samples pcnt function DSO
_______ _____ ___________________________ _________________
224648.00 36.8% xfs_error_test [kernel.kallsyms]
86045.00 14.1% xfs_btree_check_sblock [kernel.kallsyms]
39778.00 6.5% prandom32 [kernel.kallsyms]
37436.00 6.1% xfs_btree_increment [kernel.kallsyms]
29278.00 4.8% xfs_btree_get_rec [kernel.kallsyms]
27717.00 4.5% random32 [kernel.kallsyms]
Walking btree blocks during allocation checking them requires each
block (a cache hit, so no I/O) call xfs_error_test(), which then
does a random32() call as the first operation. IOWs, ~50% of the
CPU is being consumed just testing whether we need to inject an
error, even though error injection is not active.
Kill this overhead when error injection is not active by adding a
global counter of active error traps and only calling into
xfs_error_test when fault injection is active.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
When an inode has been marked stale because the cluster is being
freed, we don't want to (re-)insert this inode into the AIL. There
is a race condition where the cluster buffer may be unpinned before
the inode is inserted into the AIL during transaction committed
processing. If the buffer is unpinned before the inode item has been
committed and inserted, then it is possible for the buffer to be
released and hence processthe stale inode callbacks before the inode
is inserted into the AIL.
In this case, we then insert a clean, stale inode into the AIL which
will never get removed by an IO completion. It will, however, get
reclaimed and that triggers an assert in xfs_inode_free()
complaining about freeing an inode still in the AIL.
This race can be avoided by not moving stale inodes forward in the AIL
during transaction commit completion processing. This closes the
race condition by ensuring we never insert clean stale inodes into
the AIL. It is safe to do this because a dirty stale inode, by
definition, must already be in the AIL.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
There is an assumption in the parts of XFS that flushing a dirty
file will make all the delayed allocation blocks disappear from an
inode. That is, that after calling xfs_flush_pages() then
ip->i_delayed_blks will be zero.
This is an invalid assumption as we may have specualtive
preallocation beyond EOF and they are recorded in
ip->i_delayed_blks. A flush of the dirty pages of an inode will not
change the state of these blocks beyond EOF, so a non-zero
deeelalloc block count after a flush is valid.
The bmap code has an invalid ASSERT() that needs to be removed, and
the swapext code has a bug in that while it swaps the data forks
around, it fails to swap the i_delayed_blks counter associated with
the fork and hence can get the block accounting wrong.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
As reported by Nick Piggin, XFS is suffering from long pauses under
highly concurrent workloads when hosted on ramdisks. The problem is
that an inode buffer is stuck in the pinned state in memory and as a
result either the inode buffer or one of the inodes within the
buffer is stopping the tail of the log from being moved forward.
The system remains in this state until a periodic log force issued
by xfssyncd causes the buffer to be unpinned. The main problem is
that these are stale buffers, and are hence held locked until the
transaction/checkpoint that marked them state has been committed to
disk. When the filesystem gets into this state, only the xfssyncd
can cause the async transactions to be committed to disk and hence
unpin the inode buffer.
This problem was encountered when scaling the busy extent list, but
only the blocking lock interface was fixed to solve the problem.
Extend the same fix to the buffer trylock operations - if we fail to
lock a pinned, stale buffer, then force the log immediately so that
when the next attempt to lock it comes around, it will have been
unpinned.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Since the move to the new truncate sequence we call xfs_setattr to
truncate down excessively instanciated blocks. As shown by the testcase
in kernel.org BZ #22452 that doesn't work too well. Due to the confusion
of the internal inode size, and the VFS inode i_size it zeroes data that
it shouldn't.
But full blown truncate seems like overkill here. We only instanciate
delayed allocations in the write path, and given that we never released
the iolock we can't have converted them to real allocations yet either.
The only nasty case is pre-existing preallocation which we need to skip.
We already do this for page discard during writeback, so make the delayed
allocation block punching a generic function and call it from the failed
write path as well as xfs_aops_discard_page. The callers are
responsible for ensuring that partial blocks are not truncated away,
and that they hold the ilock.
Based on a fix originally from Christoph Hellwig. This version used
filesystem blocks as the range unit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The Geode X driver uses both of the LX's palettes, one for gamma
correction and one for colormaps.
The kernel driver currently only backs up the one used for colormaps
during suspend/resume. If you mess with gamma settings and do a
suspend/resume, colors go funny.
Fix this by backing up the video proc palette during suspend/resume,
alongside the display controller one which is already handled.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
Following commit exposed a bug in driver:
"fbdev: da8xx/omap-l1xx: implement double buffering"
Bug is, if interrupt handler is called before initialization is
finished, raster controller is enabled and following register
modifications causes hardware to stay in a broken state.
By looking at this one may say that proper locking is missing in
this driver, and a more proper fix should be prepared. However,
aformentioned commit causes a regression in the driver and some
fix to current one should be applied first.
Signed-off-by: Caglar Akyuz <caglar@bilkon-kontrol.com.tr>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: add workaround for dce3 ddc line vbios bug
drm/radeon/kms: fix interlaced and doublescan handling
drm/radeon/kms: fix typos in disabled vbios code
Revert "drm/i915/dp: use VBT provided eDP params if available"
drm/i915: Clear pfit registers when not used by any outputs
drm: record monitor status in output_poll_execute
drm: Set connector DPMS status to ON in drm_crtc_helper_set_config
drm/i915: fix regression due to ba3d8d749b01548b9
Revert "drm/radeon/kms: fix typo in r600 cs checker"
drm/i915/sdvo: Always add a 30ms delay to make SDVO TV detection reliable
MAINTAINERS: INTEL DRM DRIVERS list (intel-gfx) is subscribers-only
drm/i915/sdvo: Always fallback to querying the shared DDC line
drm/i915: Handle pagefaults in execbuffer user relocations
drm/i915/sdvo: Only enable HDMI encodings only if the commandset is supported
drm/radeon/kms: fix resume regression for some r5xx laptops
drm/radeon/kms: fix regression in rs4xx i2c setup
drm/i915: Only save/restore cursor regs if !KMS
drm/i915: Prevent integer overflow when validating the execbuffer
|
|
fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=23752
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc:stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
6xx/7xx was hitting the wrong BUS_CNTL reg and bits.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
