summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-22netfiltr: ipt_CLUSTERIP: simplify seq_file codeAAlexey Dobriyan
Pass "struct clusterip_config" itself to seq_file iterators and save one dereference. Proc entry itself isn't interesting. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-20IPv6: reassembly: replace magic number with macro definitionsShan Wei
Use macro to define high/low thresh value, refer to IPV6_FRAG_TIMEOUT. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-20netfilter: nf_conntrack_ipv6: delete the redundant macro definitionsShan Wei
The following three macro definitions are never used, so delete them. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-18netfilter: nfnetlink_queue: simplify warning messageEric Leblond
This patch remove variable part from a debug message to have message concatenation from syslog. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-18netfilter: xt_hashlimit: netns supportAlexey Dobriyan
Make hashtable per-netns. Make proc files per-netns. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-18netfilter: xt_recent: netns supportAlexey Dobriyan
Make recent table list per-netns. Make proc files per-netns. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-18netfilter: xtables: add struct xt_mtdtor_param::netAlexey Dobriyan
Add ->net to match destructor list like ->net in constructor list. Make sure it's set in ebtables/iptables/ip6tables, this requires to propagate netns up to *_unregister_table(). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-18netfilter: xtables: add struct xt_mtchk_param::netAlexey Dobriyan
Some complex match modules (like xt_hashlimit/xt_recent) want netns information at constructor and destructor time. We propably can play games at match destruction time, because netns can be passed in object, but I think it's cleaner to explicitly pass netns. Add ->net, make sure it's set from ebtables/iptables/ip6tables code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-18netfilter: xt_hashlimit: simplify seqfile codeAlexey Dobriyan
Simply pass hashtable to seqfile iterators, proc entry itself is not needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-18netfilter: netns: #ifdef ->iptable_security, ->ip6table_securityAlexey Dobriyan
'security' tables depend on SECURITY, so ifdef them. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-18netfilter: xt_connlimit: netns supportAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-13netfilter: ctnetlink: netns supportAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-13netfilter: nfnetlink: netns supportAlexey Dobriyan
Make nfnl socket per-petns. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-11netfilter: xt_osf: change %pi4 to %pI4Joe Perches
commit 8a27f7c90ffcb791eed7574922b51fb60b08fc89 changed the output style of %pi4 to use fixed width leading zero IP addresses "001.002.003.004". It's useful when printing multiple lines of addresses, but was a change in output style for some existing uses. Using %pI4 restores the previous output style. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-11ipvs: use standardized format in sprintfJoe Perches
Use the same format string as net/ipv4/netfilter/nf_nat_ftp.c to encode an ipv4 address and port. Both uses should be a single common function. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-11netfilter: nf_nat_ftp: remove (*mangle[]) array and functions, use %pI4Joe Perches
These functions merely exist to format a buffer and call nf_nat_mangle_tcp_packet. Format the buffer and perform the call in nf_nat_ftp instead. Use %pI4 for the IP address. Saves ~600 bytes of text old: $ size net/ipv4/netfilter/nf_nat_ftp.o text data bss dec hex filename 2187 160 408 2755 ac3 net/ipv4/netfilter/nf_nat_ftp.o new: $ size net/ipv4/netfilter/nf_nat_ftp.o text data bss dec hex filename 1532 112 288 1932 78c net/ipv4/netfilter/nf_nat_ftp.o Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-05IPVS: Allow boot time change of hash sizeCatalin(ux) M. BOIE
I was very frustrated about the fact that I have to recompile the kernel to change the hash size. So, I created this patch. If IPVS is built-in you can append ip_vs.conn_tab_bits=?? to kernel command line, or, if you built IPVS as modules, you can add options ip_vs conn_tab_bits=??. To keep everything backward compatible, you still can select the size at compile time, and that will be used as default. It has been about a year since this patch was originally posted and subsequently dropped on the basis of insufficient test data. Mark Bergsma has provided the following test results which seem to strongly support the need for larger hash table sizes: We do however run into the same problem with the default setting (212 = 4096 entries), as most of our LVS balancers handle around a million connections/SLAB entries at any point in time (around 100-150 kpps load). With only 4096 hash table entries this implies that each entry consists of a linked list of 256 connections *on average*. To provide some statistics, I did an oprofile run on an 2.6.31 kernel, with both the default 4096 table size, and the same kernel recompiled with IP_VS_CONN_TAB_BITS set to 18 (218 = 262144 entries). I built a quick test setup with a part of Wikimedia/Wikipedia's live traffic mirrored by the switch to the test host. With the default setting, at ~ 120 kpps packet load we saw a typical %si CPU usage of around 30-35%, and oprofile reported a hot spot in ip_vs_conn_in_get: samples % image name app name symbol name 1719761 42.3741 ip_vs.ko ip_vs.ko ip_vs_conn_in_get 302577 7.4554 bnx2 bnx2 /bnx2 181984 4.4840 vmlinux vmlinux __ticket_spin_lock 128636 3.1695 vmlinux vmlinux ip_route_input 74345 1.8318 ip_vs.ko ip_vs.ko ip_vs_conn_out_get 68482 1.6874 vmlinux vmlinux mwait_idle After loading the recompiled kernel with 218 entries, %si CPU usage dropped in half to around 12-18%, and oprofile looks much healthier, with only 7% spent in ip_vs_conn_in_get: samples % image name app name symbol name 265641 14.4616 bnx2 bnx2 /bnx2 143251 7.7986 vmlinux vmlinux __ticket_spin_lock 140661 7.6576 ip_vs.ko ip_vs.ko ip_vs_conn_in_get 94364 5.1372 vmlinux vmlinux mwait_idle 86267 4.6964 vmlinux vmlinux ip_route_input [ horms@verge.net.au: trivial up-port and minor style fixes ] Signed-off-by: Catalin(ux) M. BOIE <catab@embedromix.ro> Cc: Mark Bergsma <mark@wikimedia.org> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-04netfilter: xtables: obtain random bytes earlier, in checkentryJan Engelhardt
We can initialize the random hash bytes on checkentry. This is preferable since it is outside the hot path. Reference: http://bugzilla.netfilter.org/show_bug.cgi?id=621 Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-04netfilter: xtables: do not grab random bytes at __initJan Engelhardt
"It is deliberately not done in the init function, since we might not have sufficient random while booting." Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-04netfilter: xt_recent: save 8 bytes per htableJan Engelhardt
Moving rnd_inited into the hole after the uint8 lets go of the uint32 rnd_inited was using, plus the padding that would follow the int group. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-04netfilter: SNMP NAT: correct the size argument to kzallocJulia Lawall
obj has type struct snmp_object **, not struct snmp_object *. But indeed it is not even clear why kmalloc is needed. The memory is freed by the end of the function, so the local variable of pointer type should be sufficient. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-01-04axnet_cs: remove unnecessary spin_unlock_irqrestoreKen Kawasaki
axnet_cs: remove unnecessary spin_unlock_irqrestore,spin_lock_irqsave. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-04tipc: use kconfig to limit numeric rangesAmerigo Wang
We can rely on kconfig to limit these numbers, no need to limit them at compile time/run time. Users who modify these numbers manually should be responsible for themself. :) Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Per Liden <per.liden@ericsson.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-04can/netlink: add CAN_CTRLMODE_ONE_SHOTMarc Kleine-Budde
This patch adds the flag CAN_CTRLMODE_ONE_SHOT. It is used as mask or flag in the "struct can_ctrlmode". It allows userspace via netlink to set a CAN controller into the special "one-shot" mode. In this mode, if supported by the CAN controller, it tries only once to deliver a CAN frame and aborts it if an error (e.g.: arbitration lost) happens. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-04can: Speed up CAN frame receiption by using ml_privOliver Hartkopp
this patch removes the hlist that contains the CAN receiver filter lists. It uses the 'midlayer private' pointer ml_priv and links the filters directly to the CAN netdevice, which allows to omit the walk through the complete CAN devices hlist for each received CAN frame. This patch is tested and does not remove any locking. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-04drivers/net/cxgb3: Use kzalloc for allocating only one thingJulia Lawall
Use kzalloc rather than kcalloc(1,...) The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-04bonding: allow arp_ip_targets on separate vlans to use arp validationAndy Gospodarek
This allows a bond device to specify an arp_ip_target as a host that is not on the same vlan as the base bond device and still use arp validation. A configuration like this, now works: BONDING_OPTS="mode=active-backup arp_interval=1000 arp_ip_target=10.0.100.1 arp_validate=3" 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever 9: bond0.100@bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet 10.0.100.2/24 brd 10.0.100.255 scope global bond0.100 inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: eth1 MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 1000 ARP IP target/s (n.n.n.n form): 10.0.100.1 Slave Interface: eth1 MII Status: up Link Failure Count: 1 Permanent HW addr: 00:40:05:30:ff:30 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:13:21:be:33:e9 Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
Conflicts: drivers/net/wireless/libertas/scan.c
2009-12-30Subject: drivers/net/sh_eth.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/net/r8169.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/net/octeon/octeon_mgmt.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/net/smc911x.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/net/sunvnet.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/net/usb/catc.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/s390/net/qeth_l2_main.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/net/xilinx_emaclite.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/net/via-velocity.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/net/usb/rtl8150.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/net/igbvf/netdev.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-30drivers/net/lib82596.c: use %pM to shown MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. The only difference in the output is that the MAC address is shown in the usual colon-separated hex notation instead of space-separated. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-29Revert "b43: Enforce DMA descriptor memory constraints"John W. Linville
This reverts commit 9bd568a50c446433038dec2a5186c5c57c3dbd23. That commit is shown to cause allocation failures during initialization on some machines. http://bugzilla.kernel.org/show_bug.cgi?id=14844 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: annotate sleeping driver opsKalle Valo
To make it easier to notice cases of calling sleeping ops in atomic context, annotate driver-ops.h with appropiate might_sleep() calls. At the same time, also document in mac80211.h the op functions with missing contexts. mac80211 doesn't seem to use get_tx_stats anywhere currently. Just to be on the safe side, I documented it to be atomic, but hopefully the op can be removed in the future. Compile-tested only. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: remove requeue from workJohannes Berg
There's no need to be requeueing the work struct since we check for the scan after removing items due to possible timeouts. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: remove struct ieee80211_if_init_confJohannes Berg
All its members (vif, mac_addr, type) are now available in the vif struct directly, so we can pass that instead of the conf struct. I generated this patch (except the mac80211 and header file changes) with this semantic patch: @@ identifier conf, fn, hw; type tp; @@ tp fn(struct ieee80211_hw *hw, -struct ieee80211_if_init_conf *conf) +struct ieee80211_vif *vif) { <... ( -conf->type +vif->type | -conf->mac_addr +vif->addr | -conf->vif +vif ) ...> } Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211/cfg80211: add station eventsJohannes Berg
When, for instance, a new IBSS peer is found, userspace wants to be notified. Add events for all new stations that mac80211 learns about. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: make off-channel work genericJohannes Berg
This changes mac80211 to allow being off-channel for any type of work, not just the 'remain-on-channel' work. This also helps fast transition to a BSS on a different channel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: support remain-on-channel commandJohannes Berg
This implements the new remain-on-channel cfg80211 command in mac80211, extending the work interface. Also change the work purge code to be able to clean up events properly (pretending they timed out.) Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28cfg80211: add remain-on-channel commandJouni Malinen
Add new commands for requesting the driver to remain awake on a specified channel for the specified amount of time (and another command to cancel such an operation). This can be used to implement userspace-controlled off-channel operations, like Public Action frame exchange on another channel than the operation channel. The off-channel operation should behave similarly to scan, i.e. the local station (if associated) moves into power save mode to request the AP to buffer frames for it and then moves to the other channel to allow the off-channel operation to be completed. The duration parameter can be used to request enough time to receive a response from the target station. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28mac80211: Generalize off-channel operation helpers from scan codeJouni Malinen
The off-channel operations for going into power save mode (station mode) or stop beaconing (AP/IBSS) are not limited to scanning. Move these into a separate file and allow them to be used for other purposes, too. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-11-04 11:47:14 (GMT)