summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-07{NET, IB}/mlx4: Add device managed flow steering firmware APIHadar Hen Zion
The driver is modified to support three operation modes. If supported by firmware use the device managed flow steering API, that which we call device managed steering mode. Else, if the firmware supports the B0 steering mode use it, and finally, if none of the above, use the A0 steering mode. When the steering mode is device managed, the code is modified such that L2 based rules set by the mlx4_en driver for Ethernet unicast and multicast, and the IB stack multicast attach calls done through the mlx4_ib driver are all routed to use the device managed API. When attaching rule using device managed flow steering API, the firmware returns a 64 bit registration id, which is to be provided during detach. Currently the firmware is always programmed during HCA initialization to use standard L2 hashing. Future work should be done to allow configuring the flow-steering hash function with common, non proprietary means. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-07net/mlx4_core: Add firmware commands to support device managed flow steeringHadar Hen Zion
Add support for firmware commands to attach/detach a new device managed steering mode. Such network steering rules allow the user to provide an L2/L3/L4 flow specification to the firmware and have the device to steer traffic that matches that specification to the provided QP. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-07net/mlx4: Set steering mode according to device capabilitiesHadar Hen Zion
Instead of checking the firmware supported steering mode in various places in the code, add a dedicated field in the mlx4 device capabilities structure which is written once during the initialization flow and read across the code. This also set the grounds for add new steering modes. Currently two modes are supported, and are named after the ConnectX HW versions A0 and B0. A0 steering uses mac_index, vlan_index and priority to steer traffic into pre-defined range of QPs. B0 steering uses Ethernet L2 hashing rules and is enabled only if the firmware supports both unicast and multicast B0 steering, The current steering modes are relevant for Ethernet traffic only, such that Infiniband steering remains untouched. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-07net/mlx4_en: Re-design multicast attachments flowYevgeny Petrilin
Currently, for every change in the net device multicast list, the driver detaches all the addresses from the HW device, and then attaches the updated list. This behavior is wrong from two aspects: first, it causes a load of firmware commands and second, there is period of time where the correct addresses are not attached, which turned into packet loss. To improve - a copy of the multicast list is saved by the driver. For every change in the multicast list, the multicast list copy is used to find the delta between those two lists and add or remove multicast addresses as needed. Reported-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-07net/mlx4_core: Change resource tracking ID to be 64 bitHadar Hen Zion
Currently the IDs used by the resource tracker are of type u32, so far this was ok since all the different resources we were tracking could be encoded in 32bit. As a preparation step for tracking of resources whose IDs need > 32 bits such as network flow steering rules, who are 64 bit in size, move to use 64 bit based resource IDs. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-07net/mlx4_core: Change resource tracking mechanism to use red-black treeHadar Hen Zion
Change the data structure used for managing the SRIOV resource tracking mechanism from radix tree to red-black tree. This is preparation step for supporting resource IDs which are 64bit long, such as network flow steering rules. Such IDs can't be used as radix-tree keys on 32bit architectures and hence the reason for the change. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-07Merge branch 'master' of git://1984.lsi.us.es/nf-nextDavid S. Miller
2012-07-07r6040: remove duplicate call to the pci_set_drvdataDevendra Naga
pci_set_drvdata is called twice at the remove path of driver, call it once. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-06ipv6: fix a bad cast in ip6_dst_lookup_tail()Eric Dumazet
Fix a bug in ip6_dst_lookup_tail(), where typeof(dst) is "struct dst_entry **", not "struct dst_entry *" Reported-by: Fengguang Wu <wfg@linux.intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-06ipv6: remove redundant declarationsEric Dumazet
remove redundant declarations, they belong in include/net/tcp.h Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-06ipv4: Avoid overhead when no custom FIB rules are installed.David S. Miller
If the user hasn't actually installed any custom rules, or fiddled with the default ones, don't go through the whole FIB rules layer. It's just pure overhead. Instead do what we do with CONFIG_IP_MULTIPLE_TABLES disabled, check the individual tables by hand, one by one. Also, move fib_num_tclassid_users into the ipv4 network namespace. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-06ipoib: Need to do dst_neigh_lookup_skb() outside of priv->lock.David S. Miller
Otherwise local_bh_enable() complains. Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipv6: Initialize the neighbour pointer of rt6_info on allocationSteffen Klassert
git commit 97cac082 (ipv6: Store route neighbour in rt6_info struct) added a neighbour pointer to rt6_info. Currently we don't initialize this pointer at allocation time. We assume this pointer to be valid if it is not a null pointer, so initialize it on allocation. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-07-05drivers/ieee802154/at231rf230: remove unused return statusalex.bluesman.smirnov@gmail.com
Remove excessive variable used for the return status. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-056lowpan: revert 'reuse eth_mac_addr()'alex.bluesman.smirnov@gmail.com
This reverts the commit cdf49c283e2e105da86ca575ad35b453f5ff24ea which replaces lowpan '.ndo_set_mac_address' method by ethernet's one. Accorind to the IEEE 802.15.4 standard, device has 8-byte length address, so this hook loses the last 2 bytes which may rise a compatibility problems with other IEEE 802.15.4 standard implementations. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05dccp: remove unnecessary codes in ipv6.cRongQing.Li
opt always equals np->opts, so it is meaningless to define opt, and check if opt does not equal np->opts and then try to free opt. Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipv6: remove unnecessary codes in tcp_ipv6.cRongQing.Li
opt always equals np->opts, so it is meaningless to define opt, and check if opt does not equal np->opts and then try to free opt. Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05be2net: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05bnx2x: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05bnx2: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05tg3: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05myri10ge: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Jon Mason <mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05cxgb4: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05cxgb3: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05qlge: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05vxge: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05mlx4: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05net-next: Add netif_get_num_default_rss_queuesYuval Mintz
Most multi-queue networking driver consider the number of online cpus when configuring RSS queues. This patch adds a wrapper to the number of cpus, setting an upper limit on the number of cpus a driver should consider (by default) when allocating resources for his queues. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipv4: defer fib_compute_spec_dst() callEric Dumazet
ip_options_compile() can avoid calling fib_compute_spec_dst() by default, and perform the call only if needed. David suggested to add a helper to make the call only once. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05net: Kill dst->_neighbour, accessors, and final uses.David S. Miller
No longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05xfrm: No need to copy generic neighbour pointer.David S. Miller
Nobody reads it any longer. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipv4: No need to set generic neighbour pointer.David S. Miller
Nobody reads it any longer. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipv6: Store route neighbour in rt6_info struct.David S. Miller
This makes for a simplified conversion away from dst_get_neighbour*(). All code outside of ipv6 will use neigh lookups via dst_neigh_lookup*(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05cxgb3: Convert t3_l2t_get() over to dst_neigh_lookup().David S. Miller
This means passing in a suitable destination address. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05net: Pass neighbours and dest address into NETEVENT_REDIRECT events.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05decnet: Use neighbours privately in dn_route struct.David S. Miller
This allows an easy conversion away from dst_get_neighbour*(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05neigh: Convert over to dst_neigh_lookup_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05br_netfilter: Convert to dst_neigh_lookup_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05cxgb4i: Convert over to dst_neigh_lookup().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05cxgbi: Convert over to dst_neigh_lookup().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05qeth: Convert over to dst_neigh_lookup_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipoib: Convert over to dev_lookup_neigh_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05sch_teql: Convert over to dev_neigh_lookup_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05net: Add optional SKB arg to dst_ops->neigh_lookup().David S. Miller
Causes the handler to use the daddr in the ipv4/ipv6 header when the route gateway is unspecified (local subnet). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05net: Do delayed neigh confirmation.David S. Miller
When a dst_confirm() happens, mark the confirmation as pending in the dst. Then on the next packet out, when we have the neigh in-hand, do the update. This removes the dependency in dst_confirm() of dst's having an attached neigh. While we're here, remove the explicit 'dst' NULL check, all except 2 or 3 call sites ensure it's not NULL. So just fix those cases up. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05sunrpc: Don't do a dst_confirm() on an input routes.David S. Miller
xs_udp_data_ready() is operating on received packets, and tries to do a dst_confirm() on the dst attached to the SKB. This isn't right, dst confirmation is for output routes, not input rights. It's for resetting the timers on the nexthop neighbour entry for the route, indicating that we've got good evidence that we've successfully reached it. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipv4: Don't report neigh uptodate state in rtcache procfs.David S. Miller
Soon routes will not have a cached neigh attached, nor will we be able to necessarily go directly to a neigh from an arbitrary route. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05ipv4: Make neigh lookups directly in output packet path.David S. Miller
Do not use the dst cached neigh, we'll be getting rid of that. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-04ipv4: Fix crashes in ip_options_compile().David S. Miller
The spec_dst uses should be guarded by skb_rtable() being non-NULL not just the SKB being non-null. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-11-16 16:21:04 (GMT)