summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-24ALSA: ymfpci - Don't create invalid PCM & mixers when AC97 doesn't supportRaymond Yau
- check SDAC bit of AC97 primary codec when create "rear" device 3, "4ch" device 2 and "4ch Duplication" switch as the card need a four channels AC97 codec to support surround40. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-23ALSA: hda - Fix silent outputs from docking-station jacks of Dell laptopsTakashi Iwai
The recent change of the power-widget handling for IDT codecs caused the silent output from the docking-station line-out jack. This was partially fixed by the commit f2cbba7602383cd9cdd21f0a5d0b8bd1aad47b33 "ALSA: hda - Fix the lost power-setup of seconary pins after PM resume". But the line-out on the docking-station is still silent when booted with the jack plugged even by this fix. The remainig bug is that the power-widget is set off in stac92xx_init() because the pins in cfg->line_out_pins[] aren't checked there properly but only hp_pins[] are checked in is_nid_hp_pin(). This patch fixes the problem by checking both HP and line-out pins and leaving the power-map correctly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42637 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-23ALSA: HDA: Use model=auto for Thinkpad T510David Henningsson
The user reports that model=auto works fine for him. Using model=auto bring in new features such as jack detection notification to userspace. Alsa info is available at http://paste.ubuntu.com/805351/ Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-23ALSA: hda - Fix buffer-alignment regression with Nvidia HDMITakashi Iwai
The commit 2ae66c26550cd94b0e2606a9275eb0ab7070ad0e ALSA: hda: option to enable arbitrary buffer/period sizes introduced a regression on machines with Intel controller and Nvidia HDMI. The reason is that the driver modifies the global variable align_buffer_size when an Intel controller is found, and the Nvidia HDMI controller is probed after Intel although Nvidia chips require the aligned buffers. This patch fixes the problem by moving the flag into the local struct so that it's not affected by other controllers. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42567 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-20ALSA: hda - Fix a unused variable warningTakashi Iwai
Just overlooked. sound/pci/hda/patch_realtek.c: In function ‘alc_sku_unsol_event’: sound/pci/hda/patch_realtek.c:643:19: warning: unused variable ‘spec’ [-Wunused-variable] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-20snd-hda-intel: better Alienware M17x R3 quirkAlbert Pool
I have been told that this way the rear headphone connector is working as well; with model=alienware only laptop speakers work. The subsystem of both controller and codec is 1028:0490. Signed-off-by: Albert Pool <albertpool@solcon.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-19ALSA: hda/realtek - Remove use_jack_tbl fieldTakashi Iwai
Now that all quirks have the own unsol handlers, we don't need to check use_jack_tbl flag any more. Let's kill it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-19ALSA: hda/realtek - Avoid conflict of unsol-events with static quirksTakashi Iwai
The recently added jack-kctl support sets the unsol event tags dynamically, while static quirks usually set the fixed tags in the init_verbs array. Due to this conflict, the own unsol event handler can't retrieve the tag and handle it properly any more. For fixing this, avoid calling snd_hda_jack_add_kctls() for static quirks, and always let them use own handlers instead of the standard one for the auto-pareser. Reported-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-19ALSA: hda/realtek - Avoid multi-ios conflicting with multi-speakersTakashi Iwai
When a machine has multiple speakers, we don't need to create the controls for multi-ios. Check the number of primary outputs beforehand. Note that this workaround might not work always with new codecs in future; this assumes that both speakers and multi-io jacks share the same mixers/DACs. If they are routed with different mixers, the individual mixer controls should be needed. But, so far, this doesn't happen with the existing ALC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-16ALSA: virtuoso: Xonar DS: fix polarity of front outputClemens Ladisch
The two DACs for the front output and the surround/center/LFE/back outputs are wired up out of phase, so when channels are duplicated, their sound can cancel out each other and result in a weaker bass response. To fix this, reverse the polarity of the neutron flow to the front output. Reported-any-tested-by: Daniel Hill <daniel@enemyplanet.geek.nz> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.34+ <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-16ALSA: Au88x0 - Reduce the number of playback subdevices of au8830 from 32 to 16Raymond Yau
- The maximum number of playback streams depend on the number of sample rate conveters (16) and the number of DMA channels (32). Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-16ALSA: Au88x0 - Support 4 channels playback when AC97 codecs has SDAC bitRaymond Yau
- Check SDAC bit of AC97 codec for supporting 4 channels playback. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-16ALSA: HDA: Fix internal microphone on Dell Studio 16 XPS 1645David Henningsson
More than one user reports that changing the model from "both" to "dmic" makes their Internal Mic work. Cc: stable@kernel.org Tested-by: Martin Ling <martin-launchpad@earth.li> BugLink: https://bugs.launchpad.net/bugs/795823 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-13ALSA: Don't prompt for CONFIG_SND_COMPRESS_OFFLOADTakashi Iwai
CONFIG_SND_COMPRESS_OFFLOAD is an item to be selected by the dirver just like CONFIG_SND_PCM, and no need to prompt for explicit selection. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-13ALSA: HDA: Use LPIB position fix for Macbook Pro 7,1David Henningsson
Several users have reported "choppy" audio under the 3.2 kernel, and that changing position_fix to 1 has resolved their problem. The chip is an nVidia Corporation MCP89 High Definition Audio, [10de:0d94] (rev a2). Cc: stable@kernel.org (v3.2+) BugLink: https://bugs.launchpad.net/bugs/909419 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-12Merge branch 'topic/hda' into for-linusTakashi Iwai
2012-01-12Merge branch 'topic/misc' into for-linusTakashi Iwai
2012-01-12Merge branch 'for-3.3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc
2012-01-11Merge branch 'for-3.3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc into topic/asoc
2012-01-11ASoC: twl6040 - Add method to query optimum PDM_DL1 gainLiam Girdwood
The DL1 PDM interface adds a little gain depending on the output device. Add a method to retrieve the gain value for machine driver usage. Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-01-11ALSA: hda - Fix the lost power-setup of seconary pins after PM resumeTakashi Iwai
When multiple headphone or other detectable output pins are present, the power-map has to be updated after resume appropriately, but the current driver doesn't check all pins but only the first pin (since it's enough to check it for the mute-behavior). This resulted in the silent output from the secondary outputs after PM resume. This patch fixes the problem by checking all pins at (re-)init time. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740347 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-11ALSA: usb-audio: add Yamaha MOX6/MOX8 supportClemens Ladisch
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-11ALSA: virtuoso: add S/PDIF input support for all XonarsClemens Ladisch
All Xonar cards support S/PDIF input, but the cards without optical or coaxial plugs have only undocumented pin connectors. Support for the ST/STX was already added in a previous patch; this adds support for the D1/DX (JP2), DG (J5), DS (J5), and HDAV Slim (J12). Many thanks to Zoltan Miklos for testing the DS and DX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-11ALSA: ice1724 - Support for ooAoo SQ210aPavel Hofman
This card shares PCI ids with Chaintec AV710. Therefore, it will not be detected automatically, it can only be activated by the module parameter model=sq210a. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-11ALSA: ice1724 - Allow card info based on model onlyPavel Hofman
When two different cards share the same PCI vendor/subvendor identification, allow card info based on model only. Do not require subvendor ID. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-11ALSA: ice1724 - Create capture pcm only for ADC-enabled configurationsPavel Hofman
Add the capture pcm only if there is at least one ADC configured in the SYSCONF register. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-11ALSA: hdspm - Provide unique driver id based on card serialAdrian Knoth
Before, /proc/asound looked like this: 2 [Default ]: HDSPM - RME RayDAT_f1cd85 RME RayDAT S/N 0xf1cd85 at 0xf7300000, irq 18 In case of a second HDSPM card, its name would be Default_1. This is cumbersome, because the order of the cards isn't stable across reboots. To help userspace tools referring to the correct card, this commit provides a unique id for each card: 2 [HDSPMxf1cd85 ]: HDSPM - RME RayDAT_f1cd85 RME RayDAT S/N 0xf1cd85 at 0xf7300000, irq 18 In this example, userspace (configuration files) would then use hw:HDSPMxf1cd85 to choose the right card. The serial is masked to 24bits, so this string is always shorter than sixteen chars. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-10ASoC: Dynamically allocate the rtd device for a non-empty release()Mark Brown
The device model needs a release() function so it can free devices when they become dereferenced. Do that for rtds. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-10ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSCAxel Lin
commit 739be96 "ASoC: Fix build dependency for SND_ATMEL_SOC_SSC" introduces below build warnings: drivers/misc/Kconfig:212:error: recursive dependency detected! drivers/misc/Kconfig:212: symbol ATMEL_SSC is selected by SND_ATMEL_SOC_SSC sound/soc/atmel/Kconfig:9: symbol SND_ATMEL_SOC_SSC is selected by SND_AT91_SOC_SAM9G20_WM8731 sound/soc/atmel/Kconfig:18: symbol SND_AT91_SOC_SAM9G20_WM8731 depends on ATMEL_SSC SND_ATMEL_SOC_SSC needs ATMEL_SSC to pass compilation. This patch remove the "select ATMEL_SSC" from SND_ATMEL_SOC_SSC to avoid above warnings. And then ensures all the machine drivers that select SND_ATMEL_SOC_SSC need to depend on ATMEL_SSC. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-10ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecsTakashi Iwai
Currently the driver checks only the out_mix_path[] for the primary output route for judging whether to create the loopback-mixing control or not. But, there are cases where aamix-routing is available only on headphone or speaker paths but not on the primary output path. So, the driver ignores such cases inappropriately. This patch fixes the check of the loopback-mixing control by testing all mix-routing paths. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-10ALSA: hda - Return the error from get_wcaps_type() for invalid NIDsTakashi Iwai
When an invalid NID is given, get_wcaps() returns zero as the error, but get_wcaps_type() takes it as the normal value and returns a bogus AC_WID_AUD_OUT value. This confuses the parser. With this patch, get_wcaps_type() returns -1 when value 0 is given, i.e. an invalid NID is passed to get_wcaps(). Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740118 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-10ALSA: hda - Use auto-parser for HP laptops with cx20459 codecTakashi Iwai
These laptops can work well with the auto-parser and their BIOS setups, and in addition, the auto-parser fixes the problem with S3/S4 where the unsol event handling is killed after resume due to fallback to the single-cmd mode. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740115 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-09ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info()Takashi Iwai
Dan Carpenter reported that setting 0 to uinfo->value.enumerated.items in snd_asihpi_cmode_info() may lead to Oops. This function should return an error immediately in such a case instead. Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-09ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref()Takashi Iwai
Dan Carpenter reported that setting 0 to uinfo->value.enumerated.items in snd_hdsp_info_pref_sync_ref() may lead to Oops. This function should return an error immediately in such a case instead. Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-09ALSA: hda/cirrus - support for iMac12,2 modelJérémy Lal
This early 2011 model just need to have headphones on GPI02 instead of GPI01, and use BIOS pincfgs. It is detected by codec SSID. The iMac12,1 model is known to work the same way, although maybe not with the same codec SSID. Signed-off-by: Jérémy Lal <kapouer@melix.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-09ASoC: cx20442: add bias control over a platform provided regulatorJanusz Krzysztofik
Now that a regulator device for controlling the codec chip reset state over a platform agnostic regulator API is available on the only board using this driver so far, extend the driver with a bias control function which will request virtual power to the codec chip from that virtual regulator, and will supersede the present implementation existing at the sound card level. Thanks to the regulator sharing mechanism, both the old (the sound card) and the new (the codec) implementations should coexist smoothly until the sound card file is updated. For this to work as expected, update the sound card .set_bias_level callback to not touch codec->dapm.bias_level. While extending the cx20442 structure, drop unused control_type member. Created against linxu-3.2-rc6, tested on top of patch 1/4 "ARM: OMAP1: ams-delta: set up a regulator over the modem reset GPIO pin". Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-01-09ALSA: usb-audio - Avoid flood of frame-active debug messagesTakashi Iwai
With some buggy devices, the usb-audio driver may give "frame xxx active" kernel messages too often. Better to keep it as debug-only using snd_printdd(), and also add the rate-limit for avoiding floods. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=738681 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-09ALSA: snd-usb-us122l: Delete calls to preempt_disableKarsten Wiese
They are not needed here. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-09mfd: Put WM8994 into cache only mode when suspendingMark Brown
This is required by the ASoC driver for very low power modes where the device is fully idle but we want to update controls. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-09ASoC: Fix idma build after update for channel count checkMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-08ALSA: hdspm - Refactor serial number to avoid code duplicationAdrian Knoth
The serial number is used multiple times in hdspm.c. Since it belongs to the card, let's store it in struct hdspm and refer to it whenever necessary. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-08ALSA: usb-audio: fix possible hang and overflow in ↵Xi Wang
parse_uac2_sample_rate_range() A malicious USB device may feed in carefully crafted min/max/res values, so that the inner loop in parse_uac2_sample_rate_range() could run for a long time or even never terminate, e.g., given max = INT_MAX. Also nr_rates could be a large integer, which causes an integer overflow in the subsequent call to kmalloc() in parse_audio_format_rates_v2(). Thus, kmalloc() would allocate a smaller buffer than expected, leading to a memory corruption. To exploit the two vulnerabilities, an attacker needs physical access to the machine to plug in a malicious USB device. This patch makes two changes. 1) The type of "rate" is changed to unsigned int, so that the loop could stop once "rate" is larger than INT_MAX. 2) Limit nr_rates to 1024. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-08ALSA: Au88x0 - Fix channels swapping of 4 channels playbackRaymond Yau
Fix channels swapping of 4 channels playback by using vortex_adbdma_stopfifo instead of vortex_adbdma_pausefifo for SNDRV_PCM_TRIGGER_STOP event Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-08ALSA: Au88x0 - Fix IRQ fifo error and channels swap of 4 channels playbackRaymond Yau
Fix IRQ fifo error when playing stereo by set stereo flag of fifo control. This also fix the swap of front and rear channels on au8830. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-08ALSA: Au88x0 - Fix Xtalk's constantsRaymond Yau
- Fix XtalkGainsDefault, XtalkGains1Chn - Fix XtalkWideCoefsLeftEQ, XtalkWideCoefsRightEQ - Fix XtlakWideCoefsLeftXT, XtalkWideCoefsRightXT Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-08ALSA: Au88x0 - Xtalk - fix write/read of eq and xt instatesRaymond Yau
Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-08ALSA: ice1724 - External clock item only for cards with SPDIF_INPavel Hofman
Append the external clock item to the clock list only if the SPDIF_IN capability is defined in the SPDIF register. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-08ALSA: ice1724 - Check for ac97 to avoid kernel oopsPavel Hofman
Cards with identical PCI ids but no AC97 config in EEPROM do not have the ac97 field initialized. We must check for this case to avoid kernel oops. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-08ALSA: HDA: Remove Poulsbo position fix quirksDavid Henningsson
Now that we have changed the poulsbo chip to use LPIB position fix, we can remove the individual machine quirks that do the same thing. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-08ALSA: HDA: Fix typo for ALC269VB_FIXUP_DMICDavid Henningsson
This fixup is not actually used, so in practice this is just a cosmetic fix. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v0.10.2 at 2024-08-25 16:25:26 (GMT)