summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-13Bluetooth: Add initial mgmt_confirm_name supportJohan Hedberg
This patch adds initial support for mgmt_confirm_name. It adds the necessary tracking of the name state by extending the inquiry cache. The actual name resolving operation (to be done once inquiry is finished) is not yet part of this patch. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Move Extended Inquiry Response defines to hci.hJohan Hedberg
The EIR defines are needed also outside of mgmt.c (e.g. in hci_event.c to check if EIR data has the complete name) so it's better to have them in a single public place, i.e. hci.h. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Convert inquiry cache to use standard list typesJohan Hedberg
This makes it possible to use the convenience functions provided for standard kernel list types and it also makes it easier to extend the use of the cache for the management interface where e.g. name resolving control will be needed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-09rtlwifi: Modify rtl_pci_init to return 0 on successJohn W. Linville
Fixes problem where caller would think routine succeeded when it failed leading to divide by zero panic. (This also reverts an earlier attempt, commit 42bc0c97 "rtlwifi: Return correct failure code on error". -- JWL) Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08mac80211: do not call rate control .tx_status before .rate_initFelix Fietkau
Most rate control implementations assume .get_rate and .tx_status are only called once the per-station data has been fully initialized. minstrel_ht crashes if this assumption is violated. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rtlwifi: Return correct failure code on errorSimon Graham
Callers of rtl_pci_init expect zero to be returned on error. Returning the error code leads to, amongst other things, divide by zero panics attempting to use the ring size that is set to zero. Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08mac80211: rename mesh static path_lookup()Luis R. Rodriguez
If you want to use mesh support from mac80211 on a recent kernel on 2.6.24 you'll run into a name clash when compiling against include/linux/namei.h, so rename this routine. /home/mcgrof/tmp/compat-wireless-3.2.5-1/net/mac80211/mesh_pathtbl.c: At top level: /home/mcgrof/tmp/compat-wireless-3.2.5-1/net/mac80211/mesh_pathtbl.c:342:26: error: conflicting types for ‘path_lookup’ include/linux/namei.h:71:12: note: previous declaration of ‘path_lookup’ was here Although this could sit as a separate patch in compat-wireless it seems best to just merge upstream. Cc: Javier Cardona <javier@cozybit.com> Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org> Acked-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rtlwifi: Handle previous allocation failures when freeing device memorySimon Graham
Handle previous allocation failures when freeing device memory Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08mac80211: add #ifdef CONFIG_MAC80211_VERBOSE_DEBUG for a debug printkFelix Fietkau
When not debugging mac80211 code, station state transitions do not need to show up in the kernel log. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Correctly set txmixer_gain in RT3572 channel switching.Gertjan van Wingerde
Align with the v2.5.0.0 Ralink RT3572 driver. Save the EEPROM txmixer_gain values inside the rt2800 driver data structure and use it throughout the code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Fix RT3572 channel switch RFCSR 7 programming.Gertjan van Wingerde
Align with the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Align RT3572 channel switch RFCSR 1 programming with Ralink driver.Gertjan van Wingerde
Align with the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Fix RFCSR 12 & 13 programming on RT3572 channel switching.Gertjan van Wingerde
Align with v2.5.0.0 Ralink RT3572 driver for 2.4GHz band channel switch. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Use saved BBP 25 and 26 values when configuring channel on RT3572.Gertjan van Wingerde
This brings the rt2800 channel switching code for RT3572 closer to the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Update comment on freq_offset field in struct rt2x00_dev.Gertjan van Wingerde
The comment states that the field is only used for rt61pci and rt73usb. However, it is now used by rt2800pci and rt2800usb as well, so the comment is not correct anymore. Update the comment to not state any low-level drivers anymore. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Use struct rt2x00_dev driver data in rt2800{pci,usb}.Gertjan van Wingerde
Start using the struct rt2x00_dev driver data in rt2800 for the calibration data. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Introduce concept of driver data in struct rt2x00_dev.Gertjan van Wingerde
We are getting more and more fields in struct rt2x00_dev that are specific to one or two of the low-level drivers. Instead of putting these fields inside the main structure and thus clobbering all low-level drivers with these fields, introduce the concept of driver data inside struct rt2x00_dev, whose size is indicated by the low-level driver and which can be populated by the low-level driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08orinoco: Remove old mailing lists from MAINTAINERSDavid Gibson
The two orinoco mailing lists on sourceforge were set up many years ago and are now more or less moribund. I'd like to shut them down, so I don't have to keep filtering the spam from them (which is most of what comes through now). In preparation, this patch removes the reference to them from the MAINTAINERS file. Any remaining discussion of this approaching obsolete driver can go to the linux-wireless list. Signed-off-by: David Gibson <hermes@gibson.dropbear.id.au> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: call rate control only after initJohannes Berg
There are situations where we don't have the necessary rate control information yet for station entries, e.g. when associating. This currently doesn't really happen due to the dummy station handling; explicitly disabling rate control when it's not initialised will allow us to remove dummy stations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove set_hw_params callbackStanislaw Gruszka
We do not need that callback, settings parameters can be done locally. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove struct il_tx_infoStanislaw Gruszka
It's just wrapper to sk_buff pointers ... Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: merge il_base_params into il_cfgStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move ops out of configStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx structureStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove il_setup_interface()Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->is_activeStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->ac_to_queueStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->ac_to_fifoStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move ht out of ctx structureStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move qos_data out of ctx structureStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove ctx interface_modesStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->station_flagsStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move wep_keys out of contextStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of mcast_queueStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctxidStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of *_devtypeStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move bcast_sta_id to hw_paramsStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ap_sta_idStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of wep_key_cmdStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of qos_cmdStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of rxon_assoc_cmdStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->rxon_timing_cmdStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->rxon_cmdStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move rxon commands out of ctx structureStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: update correct dtim_period in dump_station()Amitkumar Karwar
Earlier we were using dtim period extracted from scan response buffer provided by FW in scan operation. But it is observed that sometimes the buffer doesn't contain dtim period tlv, and wrong value (0) was sent to user space. After association FW will start listening to beacon frames of connected AP and store dtim period. Therefore we can get it from FW in dump_station() instead of using wrong value obtained in scanning. Redundant code after adapting new approach for dtim period is also removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: cleanup in snmp_mib command preparation codeAmitkumar Karwar
1) Remove unnecessary switch case usage. 2) Replace "X=cpu_to_le16(le16_to_cpu(X) + Y)" by "le16_add_cpu(X, Y)" 3) Declare "ul_temp" variable as u16 instead of u32 to avoid unnecessary typecasting Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rtlwifi: Fix PCI probe error path orphaned memoryTim Gardner
Memory allocated by ieee80211_alloc_hw() will get orphaned if any subsequent initializations fail. Also don't pci_set_drvdata(pdev, NULL) until just before disabling the PCI device. Functions called by rtl_deinit_core(hw) may eventually need the context (when its actually implemented). Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: support hw scan while idleEliad Peller
Currently, mac80211 goes to idle-off before starting a scan. However, some devices that implement hw scan might not need going idle-off in order to perform a hw scan, and thus saving some energy and simplifying their state machine. (Note that this is also the case for sched scan - it currently doesn't make mac80211 go idle-off) Add a new flag to indicate support for hw scan while idle. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: enable HT operating modeAmitkumar Karwar
This patch sets default adapter channel_type as HT. Hence the device will opearate in HT mode. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mwifiex: fix NULL pointer dereference in set_channel()Amitkumar Karwar
In set_channel() callback handler, "priv" pointer is derived from net_device. Sometimes net_device pointer coming from the stack is NULL which causes kernel crash. This patch fixes the problem by deriving "priv" from wiphy when net_device pointer is NULL. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>