| Age | Commit message (Collapse) | Author |
|---|
|
Taking a cpu offline removes the cpu from the online mask before the
CPU_DEAD notification is done. The clock events layer does the cleanup
of the dead CPU from the CPU_DEAD notifier chain. tick_do_timer_cpu is
used to avoid xtime lock contention by assigning the task of jiffies
xtime updates to one CPU. If a CPU is taken offline, then this
assignment becomes stale. This went unnoticed because most of the time
the offline CPU went dead before the online CPU reached __cpu_die(),
where the CPU_DEAD state is checked. In the case that the offline CPU did
not reach the DEAD state before we reach __cpu_die(), the code in there
goes to sleep for 100ms. Due to the stale time update assignment, the
system is stuck forever.
Take the assignment away when a cpu is not longer in the cpu_online_mask.
We do this in the last call to tick_nohz_stop_sched_tick() when the offline
CPU is on the way to the final play_dead() idle entry.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
When a cpu goes offline it is removed from the broadcast masks. If the
mask becomes empty the code shuts down the broadcast device. This is
wrong, because the broadcast device needs to be ready for the online
cpu going idle (into a c-state, which stops the local apic timer).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The jinxed VAIO refuses to resume without hitting keys on the keyboard
when this is not enforced. It is unclear why the cpu ends up in a lower
C State without notifying the clock events layer, but enforcing the
oneshot broadcast here is safe.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Reevaluate C/P/T states when a cpu becomes online. This avoids
the caching of the broadcast information in the clockevents layer.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Len Brown <len.brown@intel.com>
|
|
Timekeeping resume adjusts xtime by adding the slept time in seconds and
resets the reference value of the clock source (clock->cycle_last).
clock->cycle last is used to calculate the delta between the last xtime
update and the readout of the clock source in __get_nsec_offset(). xtime
plus the offset is the current time. The resume code ignores the delta
which had already elapsed between the last xtime update and the actual
time of suspend. If the suspend time is short, then we can see time
going backwards on resume.
Suspend:
offs_s = clock->read() - clock->cycle_last;
now = xtime + offs_s;
timekeeping_suspend_time = read_rtc();
Resume:
sleep_time = read_rtc() - timekeeping_suspend_time;
xtime.tv_sec += sleep_time;
clock->cycle_last = clock->read();
offs_r = clock->read() - clock->cycle_last;
now = xtime + offs_r;
if sleep_time_seconds == 0 and offs_r < offs_s, then time goes
backwards.
Fix this by storing the offset from the last xtime update and add it to
xtime during resume, when we reset clock->cycle_last:
sleep_time = read_rtc() - timekeeping_suspend_time;
xtime.tv_sec += sleep_time;
xtime += offs_s; /* Fixup xtime offset at suspend time */
clock->cycle_last = clock->read();
offs_r = clock->read() - clock->cycle_last;
now = xtime + offs_r;
Thanks to Marcelo for tracking this down on the OLPC and providing the
necessary details to analyze the root cause.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Tosatti <marcelo@kvack.org>
|
|
Lockdep complains about the access of rtc in timekeeping_suspend
inside the interrupt disabled region of the write locked xtime lock.
Move the access outside.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <johnstul@us.ibm.com>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
drivers/net/pcmcia/3c589_cs: fix port configuration switcheroo
sk98lin: resurrect driver
ucc_geth: fix compilation
mv643xx_eth: Fix tx_bytes stats calculation
As struct iw_point is bi-directional payload, we should copy back the content
[PATCH] bcm43xx: Fix cancellation of work queue crashes
spidernet: fix interrupt reason recognition
ehea: fix last_rx update
ehea: propagate physical port state
Fix a lock problem in generic phy code
sky2: restore multicast list on resume and other ops
atl1: disable broken 64-bit DMA
|
|
10base2 and 10baseT were accidentally switched.
Noticed by Andreas HÃŒbner, forwarded by Alan Cox.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
This reverts commit e1abecc48938fbe1966ea6e78267fc673fa59295.
The driver works on some hardware that skge doesn't handle yet.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Currently qe_bd_t is used in the macro call -- dma_unmap_single,
which is a no-op on PPC32, thus error is hidden today. Starting
with 2.6.24, macro will be replaced by the empty static function,
and erroneous use of qe_bd_t will trigger compilation error.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Reported by Corey Minyard <cminyard@mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
|
|
Add Guards around TIOCSLCKTRMIOS and TIOCGLCKTRMIOS.
Several architectures are still broken. Put temporary-for-2.6.23 ifdef guards
around the offending code.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by:: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* git://git.linux-xtensa.org/kernel/xtensa-feed:
[patch 1/2] Xtensa: enable arbitary tty speed setting ioctls
[patch 2/2] xtensa console.c: remove duplicate #include
[XTENSA] Add support for cache-aliasing
[XTENSA] Add kernel module support
[XTENSA] Add support for executable/non-executable feature in the mmu
[XTENSA] Use the generic version of get_order
[XTENSA] Initialize semaphore_wake_lock
[XTENSA] Add typecast macro for constants
[XTENSA] Fix timer instabilities.
[XTENSA] Fix fadvise64_64
[XTENSA] Remove extraneous include statement
[XTENSA] Move string-io functions to io.c from pci.c
[XTENSA] Move pre-initialized structures to init_task.c
[XTENSA] Add freestanding option to CFLAGS
[XTENSA] Add getpgrp system-call to unistd.h
[XTENSA] add missing system calls
[XTENSA] fix wrong usage of __init and __initdata in traps.c
|
|
master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
Blackfin arch: fix some bugs in lib/string.h functions found by our string testing modules
Blackfin arch: fix the aliased write macros
Blackfin arch: Update/Fix PM support add new pm_ops valid
|
|
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 4567/1: Fix 'Oops - undefined instruction' when CONFIG_VFP=y on non VFP device
[ARM] realview: disable second GIC on RevB MPCore platforms
|
|
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] 20Kc: Disable use of WAIT instruction.
[MIPS] Workaround for 4Kc machine check exception
[MIPS] Malta: Fix off by one bug in interrupt handler.
[MIPS] No ide_default_io_base() if PCI IDE was not found
[MIPS] Add #include <linux/profile.h> to arch/mips/kernel/time.c
[MIPS] N32 needs to use compat_sys_futimesat
[MIPS] rtlx: Fix build error.
[MIPS] rtlx: fix int vs. long bug.
|
|
A guest context switch to an uncached cr3 can require allocation of
shadow pages, but we only recycle shadow pages in kvm_mmu_page_fault().
Move shadow page recycling to mmu_topup_memory_caches(), which is called
from both the page fault handler and from guest cr3 reload.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
V4L/DVB (6220a): fix build error for et61x251 driver
V4L/DVB (6188): Avoid a NULL pointer dereference during mpeg_open()
V4L/DVB (6173a): Documentation: Remove reference to dead "cpia_pp=" boot-time option
V4L/DVB (6148): Fix a warning at saa7191_probe
V4L/DVB (6147): Pwc: Fix a broken debug message
V4L/DVB (6144): Fix mux setup for composite sound on AverTV 307
V4L/DVB (6095): ivtv: fix VIDIOC_G_ENC_INDEX flag handling
|
|
Commit aaf68cfbf2241d24d46583423f6bff5c47e088b3 added a bias
to sk_inuse, so this test for an unused socket now fails. So no
sockets get closed because they are old (they might get closed
if the client closed them).
This bug has existed since 2.6.21-rc1.
Thanks to Wolfgang Walter for finding and reporting the bug.
Cc: Wolfgang Walter <wolfgang.walter@studentenwerk.mhn.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 02a5e0acb3cb85d80d0fe834e366d38a92bbaa22 ("BLOCK: Hide the
contents of linux/bio.h if CONFIG_BLOCK=n") broke the kernel build for
the CONFIG_COMPAT && !CONFIG_BLOCK case:
CC fs/compat_ioctl.o
In file included from include/linux/raid/md_k.h:19,
from include/linux/raid/md.h:54,
from fs/compat_ioctl.c:25:
include/linux/raid/../../../drivers/md/dm-bio-list.h: In bio_list_:
include/linux/raid/../../../drivers/md/dm-bio-list.h:40: error: dereferencing pointer to incomplete type
include/linux/raid/../../../drivers/md/dm-bio-list.h: In bio_list_:
include/linux/raid/../../../drivers/md/dm-bio-list.h:48: error: dereferencing pointer to incomplete type
include/linux/raid/../../../drivers/md/dm-bio-list.h:51: error: dereferencing pointer to incomplete type
include/linux/raid/../../../drivers/md/dm-bio-list.h: In bio_list_:
include/linux/raid/../../../drivers/md/dm-bio-list.h:64: error: dereferencing pointer to incomplete type
include/linux/raid/../../../drivers/md/dm-bio-list.h: In bio_list_merge_:
include/linux/raid/../../../drivers/md/dm-bio-list.h:78: error: dereferencing pointer to incomplete type
include/linux/raid/../../../drivers/md/dm-bio-list.h: In bio_list_:
include/linux/raid/../../../drivers/md/dm-bio-list.h:90: error: dereferencing pointer to incomplete type
include/linux/raid/../../../drivers/md/dm-bio-list.h:94: error: dereferencing pointer to incomplete type
make[1]: *** [fs/compat_ioctl.o] Error 1
make: *** [fs] Error 2
Signed-off-by: Andreas Herrmann <aherrman@arcor.de>
Acked-By: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Should add some comments for the tag barriers (they won't be so important
if we can switch over to the explicit _lock bitops, but for now we should
make it clear).
Jens' original patch said a barrier after the test_and_clear_bit was also
required. I can't see why (and it would prevent the use of the _lock bitop).
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
--
|
|
on return from ioctl calls
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
A crash upon booting that is caused by bcm43xx has been reported [1] and
found to be due to a work queue being reinitialized while work on that
queue is still pending. This fix modifies the shutdown of work queues and
prevents periodic work from being requeued during shutdown. With this patch,
no more crashes on reboot were observed by the original reporter. I do not
get that particular failure on my system; however, when running a large
number of ifdown/ifup sequences, my system would kernel panic with the
'caps lock' light blinking at roughly a 1 Hz rate. In addition, there were
infrequent failures in the firmware that resulted in 'IRQ READY TIMEOUT'
errors. With this patch, no more of the first type of failure occur, and
incidence of the second type is greatly reduced.
[1] http://bugzilla.kernel.org/show_bug.cgi?id=8937
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Another issue with 20Kc's WAIT, waiting for more details. With the
2.6.23 release immindent simply disable the use of WAIT instead of a
more fancy workaround.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fairly cosmetic as it would only affect VSMP / SMTC kernels that don't
use vectored interrupts.
Found by Beth.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Revert b5438582090406e2ccb4169d9b2df7c9939ae42b and add
no_pci_devices() check to avoid crash due to early calling of
pci_get_class().
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
It refer to CPU_PROFILING.
arch/mips/kernel/time.c: In function 'local_timer_interrupt':
arch/mips/kernel/time.c:142: error: implicit declaration of function 'profile_tick'
arch/mips/kernel/time.c:142: error: 'CPU_PROFILING' undeclared (first use in this function)
arch/mips/kernel/time.c:142: error: (Each undeclared identifier is reported only once
arch/mips/kernel/time.c:142: error: for each function it appears in.)
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
CC arch/mips/kernel/rtlx.o
cc1: warnings being treated as errors
arch/mips/kernel/rtlx.c:59: warning: 'irq' defined but not used
arch/mips/kernel/rtlx.c:60: warning: 'irq_num' defined but not used
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
CC arch/mips/kernel/rtlx.o
arch/mips/kernel/rtlx.c: In function 'rtlx_init':
arch/mips/kernel/rtlx.c:114: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
Bug: With a hardware encoder board installed as cx88[1] and a
non-encoder boards installed as cx88[0], an OOPS is generated
during cx8802_get_device() called from mpeg_open().
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
boot-time option
Since this boot-time option was removed in commit
9ab7e323af9f9efad3e20a14faa4d947adfac381, delete the reference to it.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
saa7191.c: In function 'saa7191_probe':
saa7191.c:596: warning: passing argument 3 of
'saa7191_write_block' discards qualifiers from pointer target type
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
Commit 85237f202d46d55c1bffe0c5b1aa3ddc0f1dce4d introduced the
following warning (with CONFIG_USB_PWC_DEBUG=y):
drivers/media/video/pwc/pwc-if.c: In function "pwc_video_close":
drivers/media/video/pwc/pwc-if.c:1211: warning: "i" may be used uninitialized in this function
This is true, and can cause a broken debug message to be logged.
Here's a fix.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
Right now the composite sound input doesn't work on AverTV 307 because of
the wrong mux setup. The composite sound is routed via an external
4channel multiplexer controlled by GPIO, while the code assumes an internal
multiplexer instead.
Presumably this was a copy/paste error, and noone have ever tested the
functionality.
With the attached patch it works properly, which gives me an ability to
finally watch the cable TV under linux.
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
Due to a documentation bug (the type mask is 3 bits long, not 2) the wrong
frame types were filled in: the B and P frame types were swapped.
This bug also hid a second bug: when a capture is stopped a last entry is
written into the pgm index buffer with internal type 0, denoting the end
of the program. This entry wasn't ignored, instead it was accidentally
returned to the caller as a P frame.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
Revert "usb-storage: implement autosuspend"
USB: disable autosuspend by default for non-hubs
|
|
There's a race condition in blk_queue_end_tag() for shared tag maps,
users include stex (promise supertrak thingy) and qla2xxx. The former
at least has reported bugs in this area, not sure why we haven't seen
any for the latter. It could be because the window is narrow and that
other conditions in the qla2xxx code hide this. It's a real bug,
though, as the stex smp users can attest.
We need to ensure two things - the tag bit clearing needs to happen
AFTER we cleared the tag pointer, as the tag bit clearing/setting is
what protects this map. Secondly, we need to ensure that the visibility
of the tag pointer and tag bit clear are ordered properly.
[ I removed the SMP barriers - "test_and_clear_bit()" already implies
all the required barriers. -- Linus ]
Also see http://bugzilla.kernel.org/show_bug.cgi?id=7842
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This fixes a problem introduced with commit
b5f2f4d1a6d7efde39cfb5e1d034981c69f2214c
The commit added a wrong chip definition to radeonfb which causes
a blank console on my Laptop if radeonfb is loaded.
The patch
- renames PCI_CHIP_RS485_5975 to PCI_CHIP_RS482_5975
- corrects the chip family (RS480 instead of R300) for 0x5975
- ensures that PCI IDs are in ascending order in ati_ids.h
Signed-off-by: Andreas Herrmann <aherrman@arcor.de>
Tentatively-acked-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As observed with various Radeon X300 cards console goes blank
without that fix.
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andreas Herrmann <aherrman@arcor.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
VFP device
vfp_init() takes care of the condition when CONFIG_VFP=y but no real VFP
device exists. However, when this condition is true, a compiler might
misplace code lines in a way that will break this support. (To be more
specific - fmrx(FPSID) might be executed before vfp_testing_entry
assignment, which will end up with Oops - undefined instruction).
This patch adds a barrier() to guarantee the right execution ordering.
Signed-off-by: Assaf Hoffman
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The second GIC asserts a permanent interrupt on Rev.B MPCore platforms.
Disable initialisation of this GIC to avoid unbootable systems.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
This reverts commit 8dfe4b14869fd185ca25ee88b02ada58a3005eaf.
There are a number of issues still remaining in usb-storage autosuspend,
so, to be safe, we need to revert this for now.
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch (as965) disables autosuspend by default for all USB devices
other than hubs. We are seeing too many devices that can't suspend or
resume properly, the blacklist is growing unreasonably quickly, and
this sort of thing should be handled in userspace.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch solves a problem that the spidernet driver sometimes fails
to handle IRQ.
The problem happens because,
- In Cell architecture, interrupts may arrive at an interrupt
controller, even if they are masked by the setting on registers of
devices. It happens when interrupt packets are sent just before
the interrupts are masked.
- spidernet interrupt handler compares interrupt reasons with
interrupt masks, so when such interrupts occurs, spidernet interrupt
handler returns IRQ_NONE.
- When all of interrupt handler return IRQ_NONE, linux kernel disables
the IRQ and it no longer delivers interrupts to the interrupt handlers.
spidernet doesn't work after above sequence, because it can't receive
interrupts.
This patch changes spidernet interrupt handler that it compares
interrupt reason with SPIDER_NET_INTX_MASK_VALUE.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Update last_rx in registered device struct instead of
in the dummy device.
Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
