| Age | Commit message (Collapse) | Author |
|---|
|
The iscsi_nopout task's TTT is defined as __be32 while the DMA
memory to the chip is CPU specific. This creates a problem for
unsolicited NOP-In responses where the TTT is not the RESERVED
tag of 0xFFs. This patch adds a call to be32_to_cpu for the TTT
specified.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
In commit 6a716a8, while releasing the DDP context in case frame_send() failed,
the frame may already be freed, so we should store the pointer to fc_fcp_pkt and
release the DDP context using the locally stored fsp instead of getting fsp from
the fr_fsp(fp) on a frame.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Reported-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Call fc_block_scsi_eh() in all fcoe eh to blocks
the scsi_eh thread for blocked rports.
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Reviewed-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Current fc_eh_host_reset leaves lport offline
permanently due to FLOGI response getting
handled by LOGO response from last reset as both
had same exchange id.
So fix this by having end to end exches clean-up
using exchange abort along exches reset
done from fc_eh_host_reset. This would avoid
exchanges collision between the sessions across
the reset. In this case implicit login should have
done that but no aborting support for FIP
frames, so just wait till lport->r_a_tov before
restarting next flogi to ensure all exchanges
are good to use again for next session.
Below is the trace of LOGO from older session
coming ahead of FLOGI response with same exche id
0x203:-
617 86.435165 4e.00.0b -> ff.ff.fc FC ELS LOGO 0x203
618 86.435195 4e.00.0b -> b6.02.00 FC ELS LOGO 0x213
619 86.435220 4e.00.0b -> 18.03.00 FC ELS LOGO 0x223
620 86.435244 4e.00.0b -> 18.02.00 FC ELS LOGO 0x233
621 86.435267 4e.00.0b -> 18.01.00 FC ELS LOGO 0x243
622 86.435349 00.00.00 -> ff.ff.fe FC ELS FLOGI 0x203
623 86.435549 ff.ff.fc -> 4e.00.0b FC ELS ACC (LOGO) 0x203
624 86.438721 ff.ff.fe -> 4e.00.0b FC ELS ACC (FLOGI) 0x203
625 86.442059 18.03.00 -> 4e.00.0b FC ELS ACC (LOGO) 0x223
626 86.443683 b6.02.00 -> 4e.00.0b FC ELS ACC (LOGO) 0x213
627 86.447693 18.01.00 -> 4e.00.0b FC ELS ACC (LOGO) 0x243
628 86.453499 18.02.00 -> 4e.00.0b FC ELS ACC (LOGO) 0x233
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Reviewed-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
The rtnl cannot be held durrng the fcoe_interface_put.
If it is the last reference on the fcoe_interface the
fcoe_ctlr_destroy will be called as a part of the
cleanup, ultimately calling cancel_work_sync(&fip->recv_work);
If we are processing a flogi response we will be in
the recv_work context and we will lock the rtnl to
add a new unicast MAC address. This is how the deadlock
can occur.
The fix is simply to move the rtnl_lock/unlock into
fcoe_interface_cleanup so that it can be unlocked before
fcoe_interface_put is called.
Here is the lockdep report:
Jul 21 11:26:35 bubba [ 223.870702]
ul 21 11:26:35 bubba [ 223.870704] =======================================================
Jul 21 11:26:35 bubba [ 223.871255] [ INFO: possible circular locking dependency detected ]
Jul 21 11:26:35 bubba [ 223.871530] 3.0.0-rc7+ #1
Jul 21 11:26:35 bubba [ 223.871797] -------------------------------------------------------
Jul 21 11:26:35 bubba [ 223.872072] lockdeptest.sh/3464 is trying to acquire lock:
Jul 21 11:26:35 bubba [ 223.872345] ((&fip->recv_work)
Jul 21 11:26:35 bubba ){+.+.+.}
Jul 21 11:26:35 bubba , at:
Jul 21 11:26:35 bubba [<ffffffff810531f1>] wait_on_work+0x0/0xbd
Jul 21 11:26:35 bubba [ 223.873022]
Jul 21 11:26:35 bubba [ 223.873023] but task is already holding lock:
Jul 21 11:26:35 bubba [ 223.873555] (rtnl_mutex
Jul 21 11:26:35 bubba ){+.+.+.}
Jul 21 11:26:35 bubba , at:
Jul 21 11:26:35 bubba [<ffffffff813e8233>] rtnl_lock+0x12/0x14
Jul 21 11:26:35 bubba [ 223.874229]
Jul 21 11:26:35 bubba [ 223.874230] which lock already depends on the new lock.
Jul 21 11:26:35 bubba [ 223.874231]
Jul 21 11:26:35 bubba [ 223.875032]
Jul 21 11:26:35 bubba [ 223.875033] the existing dependency chain (in reverse order) is:
Jul 21 11:26:35 bubba [ 223.875573]
Jul 21 11:26:35 bubba [ 223.875573] -> #1
Jul 21 11:26:35 bubba (rtnl_mutex
Jul 21 11:26:35 bubba ){+.+.+.}
Jul 21 11:26:35 bubba :
Jul 21 11:26:35 bubba [ 223.876301]
Jul 21 11:26:35 bubba [<ffffffff8106c14a>] lock_acquire+0xd2/0xf7
Jul 21 11:26:35 bubba [ 223.876645]
Jul 21 11:26:35 bubba [<ffffffff8151d975>] __mutex_lock_common+0x47/0x30d
Jul 21 11:26:35 bubba [ 223.876991]
Jul 21 11:26:35 bubba [<ffffffff8151dd36>] mutex_lock_nested+0x3b/0x40
Jul 21 11:26:35 bubba [ 223.877334]
Jul 21 11:26:35 bubba [<ffffffff813e8233>] rtnl_lock+0x12/0x14
Jul 21 11:26:35 bubba [ 223.877675]
Jul 21 11:26:35 bubba [<ffffffffa003d5a0>] fcoe_update_src_mac+0x2b/0x80 [fcoe]
Jul 21 11:26:35 bubba [ 223.878022]
Jul 21 11:26:35 bubba [<ffffffffa003d698>] fcoe_flogi_resp+0x5e/0x79 [fcoe]
Jul 21 11:26:35 bubba [ 223.878366]
Jul 21 11:26:35 bubba [<ffffffffa001566f>] fc_exch_recv+0x7f5/0x9da [libfc]
Jul 21 11:26:35 bubba [ 223.878713]
Jul 21 11:26:35 bubba [<ffffffffa00327d8>] fcoe_ctlr_recv_work+0x71f/0x10dc [libfcoe]
Jul 21 11:26:35 bubba [ 223.879258]
Jul 21 11:26:35 bubba [<ffffffff81053761>] process_one_work+0x1d7/0x347
Jul 21 11:26:35 bubba [ 223.879601]
Jul 21 11:26:35 bubba [<ffffffff81054ade>] worker_thread+0xf8/0x17c
Jul 21 11:26:35 bubba [ 223.879944]
Jul 21 11:26:35 bubba [<ffffffff81058184>] kthread+0x7d/0x85
Jul 21 11:26:35 bubba [ 223.880287]
Jul 21 11:26:35 bubba [<ffffffff81526414>] kernel_thread_helper+0x4/0x10
Jul 21 11:26:35 bubba [ 223.880634]
Jul 21 11:26:35 bubba [ 223.880635] -> #0
Jul 21 11:26:35 bubba ((&fip->recv_work)
Jul 21 11:26:35 bubba ){+.+.+.}
Jul 21 11:26:35 bubba :
Jul 21 11:26:35 bubba [ 223.881357]
Jul 21 11:26:35 bubba [<ffffffff8106b93e>] __lock_acquire+0xb1d/0xe2c
Jul 21 11:26:35 bubba [ 223.881695]
Jul 21 11:26:35 bubba [<ffffffff8106c14a>] lock_acquire+0xd2/0xf7
Jul 21 11:26:35 bubba [ 223.882033]
Jul 21 11:26:35 bubba [<ffffffff81053241>] wait_on_work+0x50/0xbd
Jul 21 11:26:35 bubba [ 223.882378]
Jul 21 11:26:35 bubba [<ffffffff81053b32>] __cancel_work_timer+0xb6/0xf4
Jul 21 11:26:35 bubba [ 223.882718]
Jul 21 11:26:35 bubba [<ffffffff81053b8a>] cancel_work_sync+0xb/0xd
Jul 21 11:26:35 bubba [ 223.883057]
Jul 21 11:26:35 bubba [<ffffffffa00317e6>] fcoe_ctlr_destroy+0x1d/0x67 [libfcoe]
Jul 21 11:26:35 bubba [ 223.883399]
Jul 21 11:26:35 bubba [<ffffffffa003e51e>] fcoe_interface_release+0x21/0x45 [fcoe]
Jul 21 11:26:35 bubba [ 223.883940]
Jul 21 11:26:35 bubba [<ffffffff811fbbe6>] kref_put+0x43/0x4d
Jul 21 11:26:35 bubba [ 223.884280]
Jul 21 11:26:35 bubba [<ffffffffa003ebba>] fcoe_interface_put+0x17/0x19 [fcoe]
Jul 21 11:26:35 bubba [ 223.884624]
Jul 21 11:26:35 bubba [<ffffffffa003f2a6>] fcoe_interface_cleanup+0x188/0x193 [fcoe]
Jul 21 11:26:35 bubba [ 223.885163]
Jul 21 11:26:35 bubba [<ffffffffa003f303>] fcoe_destroy+0x52/0x72 [fcoe]
Jul 21 11:26:35 bubba [ 223.885502]
Jul 21 11:26:35 bubba [<ffffffffa00340a4>] fcoe_transport_destroy+0xab/0x110 [libfcoe]
Jul 21 11:26:35 bubba [ 223.886045]
Jul 21 11:26:35 bubba [<ffffffff81056153>] param_attr_store+0x43/0x62
Jul 21 11:26:35 bubba [ 223.886385]
Jul 21 11:26:35 bubba [<ffffffff8105602d>] module_attr_store+0x21/0x25
Jul 21 11:26:35 bubba [ 223.886728]
Jul 21 11:26:35 bubba [<ffffffff8114c23d>] sysfs_write_file+0x103/0x13f
Jul 21 11:26:35 bubba [ 223.887068]
Jul 21 11:26:35 bubba [<ffffffff810f3e7b>] vfs_write+0xa7/0xfa
Jul 21 11:26:35 bubba [ 223.887406]
Jul 21 11:26:35 bubba [<ffffffff810f4073>] sys_write+0x45/0x69
Jul 21 11:26:35 bubba [ 223.887742]
Jul 21 11:26:35 bubba [<ffffffff815252bb>] system_call_fastpath+0x16/0x1b
Jul 21 11:26:35 bubba [ 223.888083]
Jul 21 11:26:35 bubba [ 223.888084] other info that might help us debug this:
Jul 21 11:26:35 bubba [ 223.888085]
Jul 21 11:26:35 bubba [ 223.888879] Possible unsafe locking scenario:
Jul 21 11:26:35 bubba [ 223.888881]
Jul 21 11:26:35 bubba [ 223.889411] CPU0 CPU1
Jul 21 11:26:35 bubba [ 223.889683] ---- ----
Jul 21 11:26:35 bubba [ 223.889955] lock(
Jul 21 11:26:35 bubba rtnl_mutex
Jul 21 11:26:35 bubba );
Jul 21 11:26:35 bubba [ 223.890349] lock(
Jul 21 11:26:35 bubba (&fip->recv_work)
Jul 21 11:26:35 bubba );
Jul 21 11:26:35 bubba [ 223.890751] lock(
Jul 21 11:26:35 bubba rtnl_mutex
Jul 21 11:26:35 bubba );
Jul 21 11:26:35 bubba [ 223.891154] lock(
Jul 21 11:26:35 bubba (&fip->recv_work)
Jul 21 11:26:35 bubba );
Jul 21 11:26:35 bubba [ 223.891549]
Jul 21 11:26:35 bubba [ 223.891550] *** DEADLOCK ***
Jul 21 11:26:35 bubba [ 223.891551]
Jul 21 11:26:35 bubba [ 223.892347] 6 locks held by lockdeptest.sh/3464:
Jul 21 11:26:35 bubba [ 223.892621] #0:
Jul 21 11:26:35 bubba (&buffer->mutex
Jul 21 11:26:35 bubba ){+.+.+.}
Jul 21 11:26:35 bubba , at:
Jul 21 11:26:35 bubba [<ffffffff8114c171>] sysfs_write_file+0x37/0x13f
Jul 21 11:26:35 bubba [ 223.893359] #1:
Jul 21 11:26:35 bubba (s_active
Jul 21 11:26:35 bubba ){++++.+}
Jul 21 11:26:35 bubba , at:
Jul 21 11:26:35 bubba [<ffffffff8114c21c>] sysfs_write_file+0xe2/0x13f
Jul 21 11:26:35 bubba [ 223.894094] #2:
Jul 21 11:26:35 bubba (param_lock
Jul 21 11:26:35 bubba ){+.+.+.}
Jul 21 11:26:35 bubba , at:
Jul 21 11:26:35 bubba [<ffffffff81056146>] param_attr_store+0x36/0x62
Jul 21 11:26:35 bubba [ 223.894835] #3:
Jul 21 11:26:35 bubba (ft_mutex
Jul 21 11:26:35 bubba ){+.+.+.}
Jul 21 11:26:35 bubba , at:
Jul 21 11:26:35 bubba [<ffffffffa0034017>] fcoe_transport_destroy+0x1e/0x110 [libfcoe]
Jul 21 11:26:35 bubba [ 223.895574] #4:
Jul 21 11:26:35 bubba (fcoe_config_mutex
Jul 21 11:26:35 bubba ){+.+.+.}
Jul 21 11:26:35 bubba , at:
Jul 21 11:26:35 bubba [<ffffffffa003f2c9>] fcoe_destroy+0x18/0x72 [fcoe]
Jul 21 11:26:35 bubba [ 223.896314] #5:
Jul 21 11:26:35 bubba (rtnl_mutex
Jul 21 11:26:35 bubba ){+.+.+.}
Jul 21 11:26:35 bubba , at:
Jul 21 11:26:35 bubba [<ffffffff813e8233>] rtnl_lock+0x12/0x14
Jul 21 11:26:35 bubba [ 223.897047]
Jul 21 11:26:35 bubba [ 223.897048] stack backtrace:
Jul 21 11:26:35 bubba [ 223.897578] Pid: 3464, comm: lockdeptest.sh Not tainted 3.0.0-rc7+ #1
Jul 21 11:26:35 bubba [ 223.897853] Call Trace:
Jul 21 11:26:35 bubba [ 223.898128] [<ffffffff81068e16>] print_circular_bug+0x1f8/0x209
Jul 21 11:26:35 bubba [ 223.898416] [<ffffffff8106b93e>] __lock_acquire+0xb1d/0xe2c
Jul 21 11:26:35 bubba [ 223.898699] [<ffffffff810531f1>] ? wait_on_cpu_work+0xe6/0xe6
Jul 21 11:26:35 bubba [ 223.898982] [<ffffffff8106c14a>] lock_acquire+0xd2/0xf7
Jul 21 11:26:35 bubba [ 223.899263] [<ffffffff810531f1>] ? wait_on_cpu_work+0xe6/0xe6
Jul 21 11:26:35 bubba [ 223.899547] [<ffffffff8104a097>] ? mod_timer+0x8f/0x98
Jul 21 11:26:35 bubba [ 223.899827] [<ffffffff81053241>] wait_on_work+0x50/0xbd
Jul 21 11:26:35 bubba [ 223.900108] [<ffffffff810531f1>] ? wait_on_cpu_work+0xe6/0xe6
Jul 21 11:26:35 bubba [ 223.900390] [<ffffffff81053b32>] __cancel_work_timer+0xb6/0xf4
Jul 21 11:26:35 bubba [ 223.900671] [<ffffffff81053b8a>] cancel_work_sync+0xb/0xd
Jul 21 11:26:35 bubba [ 223.900953] [<ffffffffa00317e6>] fcoe_ctlr_destroy+0x1d/0x67 [libfcoe]
Jul 21 11:26:35 bubba [ 223.901237] [<ffffffffa003e51e>] fcoe_interface_release+0x21/0x45 [fcoe]
Jul 21 11:26:35 bubba [ 223.901522] [<ffffffffa003e4fd>] ? fcoe_enable+0x6b/0x6b [fcoe]
Jul 21 11:26:35 bubba [ 223.901803] [<ffffffff811fbbe6>] kref_put+0x43/0x4d
Jul 21 11:26:35 bubba [ 223.902083] [<ffffffffa003ebba>] fcoe_interface_put+0x17/0x19 [fcoe]
Jul 21 11:26:35 bubba [ 223.902367] [<ffffffffa003f2a6>] fcoe_interface_cleanup+0x188/0x193 [fcoe]
Jul 21 11:26:35 bubba [ 223.902653] [<ffffffff8151dd36>] ? mutex_lock_nested+0x3b/0x40
Jul 21 11:26:35 bubba [ 223.902939] [<ffffffffa003f303>] fcoe_destroy+0x52/0x72 [fcoe]
Jul 21 11:26:35 bubba [ 223.903223] [<ffffffffa00340a4>] fcoe_transport_destroy+0xab/0x110 [libfcoe]
Jul 21 11:26:35 bubba [ 223.903508] [<ffffffff81056153>] param_attr_store+0x43/0x62
Jul 21 11:26:35 bubba [ 223.903792] [<ffffffff8105602d>] module_attr_store+0x21/0x25
Jul 21 11:26:35 bubba [ 223.904075] [<ffffffff8114c23d>] sysfs_write_file+0x103/0x13f
Jul 21 11:26:35 bubba [ 223.904357] [<ffffffff810f3e7b>] vfs_write+0xa7/0xfa
Jul 21 11:26:35 bubba [ 223.904642] [<ffffffff810f51d6>] ? fget_light+0x35/0x96
Jul 21 11:26:35 bubba [ 223.904923] [<ffffffff810f4073>] sys_write+0x45/0x69
Jul 21 11:26:35 bubba [ 223.905204] [<ffffffff815252bb>] system_call_fastpath+0x16/0x1b
Jul 21 11:26:36 bubba [ 223.964438] ixgbe 0000:05:00.0: eth3: detected SFP+: 5
Jul 21 11:26:37 bubba [ 225.196702] ixgbe 0000:05:00.0: eth3: NIC Link is Up 10 Gbps, Flow Control: None
Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Reviewed-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
The memset of the fcp_cmnd struct needs to be moved so that it will not
zero-out valid data.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
port-update handling.
Transitioning to a LOOP_UPDATE loop-state could cause the driver
to miss normal link/target processing. LOOP_UPDATE is a crufty
artifact leftover from at time the driver performed it's own
internal command-queuing. Safely remove this state.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
fails.
Close a small window where we could falsely fail an abort request if the mailbox
command fails but the command was returned during interrupt context.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
The dsd list shouldn't be manipulated without taking the per host hardware
lock to prevent multiple callers from trampling upon one another.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Since we enable interrupts before initializing the firmware, use the chip
revision from PCI config space directly to perform the chip revision check.
Also remove the unnecessary firmware attributes test.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
This fix:
- Disables app tag peeking; correct tag check will be added when the
SCSI API is available.
- Always derive ref_tag from scsi_get_lba()
- Removes incorrect swap of FCP_LUN in FCP_CMND
- Moves app-tag error check before ref-tag check. The reason being,
currently there is no interface in SCSI to retrieve the app-tag
for protection I/Os, so driver puts zero for app-tag in the
firmware interface, but requests not to validate it, but when a
ref-tag error is detected by firmware, it would put
expected/actual tags for all the protection tags (guard/app/ref).
As driver checks for app tag error first, a ref-tag error is
incorrectly flagged as app-tag error.
- Convert HBA specific checks to capability based.
Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Driver needs to update protection bytes for uninitialized sectors as they are
not DMA-d.
Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Reviewed-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
If a physical device exposed to the OS by hpsa
is replaced (e.g. one hot plug tape drive is replaced
by another, or a tape drive is placed into "OBDR" mode
in which it acts like a CD-ROM device) and a rescan is
initiated, the replaced device will be added to the
SCSI midlayer with target and lun numbers set to -1.
After that, a panic is likely to ensue. When a physical
device is replaced, the lun and target number should be
preserved.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
The test to detect OBDR ("One Button Disaster Recovery")
cd-rom devices was comparing against uninitialized data.
Fixed by moving the test for the device to where the
inquiry data is collected, and uninitialized variable
altogether as it wasn't really being used.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Hardware only increments the put pointer on event types >= 4. Do not
increment the get pointer for event type 3.
Reported-by: Kapil Karkra <kapil.karkra@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Hardware allows both an outstanding number commands and a timeout value
(whichever occurs first) as a gate to the next interrupt generation. This
scheme at completion time looks at the remaining number of outstanding tasks
and sets the timeout to maximize small transaction operation. If transactions
are large (take more than a few 10s of microseconds to complete) then
performance is not interrupt processing bound, so the small timeouts this
scheme generates are overridden by the time it takes for a completion to
arrive.
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Instead of immediately completing any request that has a second
termination call made on it, wait for the TC done/abort HW event.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Adding API update for adding isci_id entry scsi_host sysfs entry.
Also fixing up the sysfs registration to the scsi_host template
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Need the following workaround in the driver for interoperability with
the older Intel SSD drives and any other SATA drive that may exhibit the
same behavior. This is a corner case where SCU speed is limited to
either 3G or 1.5G and the drive has a period of DC idle when it switches
speed during SATA speed negotiation. Workaround :change PHYTOV[31:24]
from 0x36 to 0x3B.
Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
The unsolicited frame control infrastructure requires a table of dma
addresses for the hardware to lookup the frame buffer location by an
index. The hardware expects the elements of this table to be 64-bit
quantities, so we cannot reference these elements as dma_addr_t. All
unsolicited frame protocols are affected, particularly SATA-PIO and SMP
which prevented direct-attached SATA drives and expander-attached drives
to not be discovered.
Cc: <stable@kernel.org>
Reported-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
A bug (likely copy/paste) that has been carried from the original
implementation. The unsolicited frame handling structure returns the
d2h fis in the isci_request.stp.rsp buffer.
Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Fixes fallout due to the removal of the cast in commit aa462abe8aaf
("mm: fix __page_to_pfn for a const struct page argument")
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: fix tracing builds inside the source tree
xfs: remove subdirectories
xfs: don't expect xfs headers to be in subdirectories
|
|
* git://git.infradead.org/users/cbou/battery-3.1:
s3c-adc-battery: Fix compilation error due to missing header (module.h)
max8997_charger: Needs module.h
max8998_charger: Needs module.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 HDMI-A Connector
drm/ttm: ensure ttm for new node is bound before calling move_notify()
drm/ttm: unbind ttm before destroying node in accel move cleanup
drm/ttm: fix ttm_bo_add_ttm(user) failure path
drm/radeon: Make vramlimit parameter actually work.
drm/radeon: Explicitly print GTT/VRAM offsets on test failure.
drm/radeon: Take IH ring into account for test size calculation.
drm/radeon/alpha: Add Alpha support to Radeon DRM code
|
|
This reverts commit f3637a5f2e2eb391ff5757bc83fb5de8f9726464.
It turns out that this breaks several drivers, one example being OMAP
boards which use the on-board OMAP UARTs and the omap-serial driver that
will not boot to userspace after the commit.
Paul Walmsley reports that enabling CONFIG_DEBUG_SHIRQ reveals 'IRQ
handler type mismatch' errors:
IRQ handler type mismatch for IRQ 74
current handler: serial idle
...
and the reason is that setting IRQF_ONESHOT will now result in those
interrupt handlers having different IRQF flags, and thus being
unsharable. So the commit log in the reverted commit:
"Since it is required for those users and
there is no difference for others it makes sense to add this flag
unconditionally."
is simply not true: there may not be any difference from a "actions at
irq time", but there is a *big* difference wrt this flag testing irq
management (see __setup_irq() in kernel/irq/manage.c).
One solution may be to stop verifying IRQF_ONESHOT in __setup_irq(), but
right now the safe course of action is to revert the change. Let's
revisit this in a later merge window.
Reported-by: Paul Walmsley <paul@pwsan.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
HDMI-A Connector
Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data
to i2c bus for a HDMI connector that is not implemented/existent
on the notebook's board.
Fix by applying extented DDC probing for this connector.
Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors
with Improperly Wired DDC Lines
Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook
BugLink: http://bugs.launchpad.net/bugs/826677
Signed-off-by: Thomas Reim <reimth@gmail.com>
Acked-by: Chris Routh <routhy@gmail.com>
Cc: <stable@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't
the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some
paths as nouveau's move_notify() hook requires that the dma addresses be
valid at this point.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Nouveau makes the assumption that if a TTM is bound there will be a mm_node
around for it and the backwards ordering here resulted in a use-after-free
on some eviction paths.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
ttm_tt_destroy kfrees passed object, so we need to nullify
a reference to it.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The code really requires the current source directory to be in the
header search path. We already do this if building with an object
tree separate from the source, but it needs to be added manually
if building inside the source. The cflags addition for it accidentally
got removed when collapsing the xfs directory structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tools: Add group event scheduling option to perf record/stat
MAINTAINERS: Fix list of perf events source files
perf tools: Fix build against newer glibc
perf tools: Fix error handling of unknown events
perf evlist: Fix missing event name init for default event
perf list: Fix exit value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/tracing: Fix tracing config option properly
xen: Do not enable PV IPIs when vector callback not present
xen/x86: replace order-based range checking of M2P table by linear one
xen: xen-selfballoon.c needs more header files
|
|
Steven Rostedt says we should use CONFIG_EVENT_TRACING.
Cc:Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Fix regression for HVM case on older (<4.1.1) hypervisors caused by
commit 99bbb3a84a99cd04ab16b998b20f01a72cfa9f4f
Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Thu Dec 2 17:55:10 2010 +0000
xen: PV on HVM: support PV spinlocks and IPIs
This change replaced the SMP operations with event based handlers without
taking into account that this only works when the hypervisor supports
callback vectors. This causes unexplainable hangs early on boot for
HVM guests with more than one CPU.
BugLink: http://bugs.launchpad.net/bugs/791850
CC: stable@kernel.org
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Otherwise these would need to be painstakingly calculated looking at the source
code.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Alpha needs to have available the system bus address for the Radeon's
local memory, so that it can be used in ttm_bo_vm_fault(), when building
the PTEs for accessing that VRAM. So, we make bus.addr hold the ioremap()
return, and then we can modify bus.base appropriately for use during page
fault processing.
Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: core: handle ack_busy when fetching the Config ROM
|
|
This fixes a regression introduced by commit cdcb725c05fe ("Btrfs: check
if there is enough space for balancing smarter"). We can't do 64-bit
divides on 32-bit architectures.
In cases where we need to divide/multiply by 2 we should just left/right
shift respectively, and in cases where theres N number of devices use
do_div. Also make the counters u64 to match up with rw_devices.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Acked-and-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: flush any pending end_io requests before DIO reads w/dioread_nolock
ext4: fix nomblk_io_submit option so it correctly converts uninit blocks
ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN.
ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode
ext4: Fix ext4_should_writeback_data() for no-journal mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfree
ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.c
ALSA: hda - Don't spew too many ELD errors
ALSA: usb-audio - Fix missing mixer dB information
ALSA: hda - Add "PCM" volume to vmaster slave list
ALSA: hda - Fix duplicated capture-volume creation for ALC268 models
ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist
ALSA: snd_usb_caiaq: track submitted output urbs
|
|
Fix new kernel-doc warning in pci.c:
Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps'
Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The label outnodev is only used when kzalloc has not yet taken place or has
failed, so there is no need for the call for kfree under this label.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier x;
expression E1!=0,E2,E3,E4;
statement S;
iterator I;
@@
(
if (...) { ... when != kfree(x)
when != x = E3
when != E3 = x
* return ...;
}
... when != x = E2
when != I(...,x,...) S
if (...) { ... when != x = E4
kfree(x); ... return ...; }
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
