summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-01-12x86: avoid theoretical vmalloc fault loopAndi Kleen
Ajith Kumar noticed: I was going through the vmalloc fault handling for x86_64 and am unclear about the following lines in the vmalloc_fault() function. pgd = pgd_offset(current->mm ?: &init_mm, address); pgd_ref = pgd_offset_k(address); Here the intention is to get the pgd corresponding to the current process and sync it up with the pgd in init_mm(obtained from pgd_offset_k). However, for kernel threads current->mm is NULL and hence pgd = pgd_offset(init_mm, address) = pgd_ref which means the fault handler returns without setting the pgd entry in the MM structure in the context of which the kernel thread has faulted. This could lead to never-ending faults and busy looping of kernel threads like pdflush. So, shouldn't the pgd = pgd_offset(current->mm ?: &init_mm, address); be pgd = pgd_offset(current->active_mm ?: &init_mm, address); We can use active_mm unconditionally because it should be always set. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12smp_call_function_single(): be slightly less stupid, fix #2Ingo Molnar
fix m68k build failure: tip/kernel/up.c: In function 'smp_call_function_single': tip/kernel/up.c:16: error: dereferencing pointer to incomplete type make[2]: *** [kernel/up.o] Error 1 Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2009-01-12[ARM] 5364/1: allow flush_ioremap_region() to be used from modulesNicolas Pitre
Without this, the pxa2xx-flash driver cannot be used as a module. Reported-by: Chris Lawrence <chrisdl@netspace.net.au> Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-12[ARM] w90x900: fix build errors and warningsRussell King
Fix: arch/arm/mach-w90x900/mach-w90p910evb.c:65: error: 'W90X900_PA_UART' undeclared here (not in a function) and silence warnings caused by inappropriate inclusion of mach/system.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-12Merge branch 'topic/usb-caiaq' into for-linusTakashi Iwai
2009-01-12Merge branch 'topic/hda' into for-linusTakashi Iwai
2009-01-12Merge branch 'topic/asoc' into for-linusTakashi Iwai
2009-01-12Merge branch 'master' of ↵Karsten Keil
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for_2.6.29
2009-01-12lockdep, mm: fix might_fault() annotationPeter Zijlstra
Some code (nfs/sunrpc) uses socket ops on kernel memory while holding the mmap_sem, this is safe because kernel memory doesn't get paged out, therefore we'll never actually fault, and the might_fault() annotations will generate false positives. Reported-by: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12[ARM] i.MX add missing includeSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-12[ARM] i.MX: fix breakage from commit 278892736e99330195c8ae5861bcd9d791bbf19eSascha Hauer
Fix breakage from commit 278892736e99330195c8ae5861bcd9d791bbf19e: i.MX Framebuffer: rename imxfb_mach_info to imx_fb_platform_data Forgot to rename the parts in arch/arm/mach-imx/generic.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-12[ARM] i.MX: remove LCDC controller register definitions from imx-regs.hSascha Hauer
The LCDC controller register definitions are now part of the driver itself, so remove them from imx-regs.h to avoid redefitions. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-12ALSA: hda - Use own workqueueTakashi Iwai
snd-hda-intel driver used schedule_work() fot the delayed DMA pointer updates, but this has several potential problems: - it may block other eventsd works longer - it may deadlock when probing fails and flush_scheduled_work() is called during probe callback (as probe callback itself could be invoked from eventd) This patch adds an own workq for each driver instance to solve these problems. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: hda - add support for Intel DX58SO boardWu Fengguang
The Intel DX58SO board works fine with model ALC883_3ST_6ch_INTEL. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12powerpc: Fix cpufreq drivers after cpufreq core changesBenjamin Herrenschmidt
This updates the cpufreq drivers in arch/powerpc so they build again after the core cpufreq changes that broke them in commit in835481d9bcd65720b473db6b38746a74a3964218. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-11Fix small typoKarsten Keil
Remove additional ; Signed-off-by: Karsten Keil <kkeil@suse.de>
2009-01-11misdn: indentation and braces disagree - add bracesIlpo Järvinen
This is not buggy due to plain luck as there is only one entry currently in the element_attributes. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Karsten Keil <kkeil@suse.de>
2009-01-11misdn: one handmade ARRAY_SIZE convertedIlpo Järvinen
Defined as: static struct device_attribute element_attributes[] = { Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Karsten Keil <kkeil@suse.de>
2009-01-11drivers/isdn/hardware/mISDN: move a dereference below a NULL testJulia Lawall
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Karsten Keil <kkeil@suse.de>
2009-01-11indentation & braces disagree - add bracesIlpo Järvinen
Nothing is broken because of this - currently. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-01-11Make parameter debug writableKarsten Keil
Overseen in the last patch series. Signed-off-by: Karsten Keil <kkeil@suse.de>
2009-01-11BUGFIX: used NULL pointer at ioctl(sk,IMGETDEVINFO,&devinfo) when devinfo.id ↵Martin Bachem
not registered daxtar example # modprobe hfcsusb daxtar example # modprobe mISDN_l1loop daxtar example # ./misdnportinfo Found 3 devices id: 0 Dprotocols: 00000006 Bprotocols: 0000000e protocol: 0 nrbchan: 2 name: HFC-S_USB.1 id: 1 Dprotocols: 00000006 Bprotocols: 0000000e protocol: 0 nrbchan: 2 name: mISDN_l1loop.1 id: 2 Dprotocols: 00000006 Bprotocols: 0000000e protocol: 0 nrbchan: 2 name: mISDN_l1loop.2 daxtar example # rmmod hfcsusb daxtar example # ./misdnportinfo Found 2 devices *Segmentation* *fault* dmesg: [ 9914.939718] BUG: unable to handle kernel NULL pointer dereference at 000000d4 [ 9914.939721] IP: [<f8f9f2dd>] :mISDN_core:get_mdevice+0x19/0x22 [ 9914.939729] *pde = 00000000 [ 9914.939732] Oops: 0000 [#14] PREEMPT SMP [ 9914.939734] Modules linked in: mISDN_l1loop mISDN_core vmnet vmblock vmci vmmon coretemp w83627ehf hwmon_vid rfcomm l2cap blue tooth usbhid snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep fuse nvidia(P) uhci_hcd i2c_i801 ehci_hcd snd_hda_intel atl1 usbcore i2c_core parport_seria l [last unloaded: hfcsusb] [ 9914.939751] Pid: 29618, comm: misdnportinfo Tainted: P D (2.6.27.3 #5) [ 9914.939753] EIP: 0060:[<f8f9f2dd>] EFLAGS: 00210246 CPU: 0 [ 9914.939758] EIP is at get_mdevice+0x19/0x22 [mISDN_core] [ 9914.939760] EAX: 00000000 EBX: f8fa791c ECX: f6afaa58 EDX: f7960cf4 [ 9914.939762] ESI: 80044944 EDI: bfc2e62c EBP: bfc2e62c ESP: f5adbef4 [ 9914.939763] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 9914.939765] Process misdnportinfo (pid: 29618, ti=f5ada000 task=f6bec430 task.ti=f5ada000) [ 9914.939767] Stack: f8f9f4e0 00000000 f8f9f867 bfc2e62c 0000000a c02461e8 00200246 c042dde8 [ 9914.939771] 00000003 c042dde4 00000000 00000001 00200082 c0114775 00000000 00000000 [ 9914.939775] 00000003 f7088010 00200282 f8fa791c 80044944 bfc2e62c bfc2e62c c02f6615 [ 9914.939780] Call Trace: [ 9914.939782] [<f8f9f4e0>] _get_mdevice+0x0/0x18 [mISDN_core] [ 9914.939789] [<f8f9f867>] base_sock_ioctl+0x7a/0x129 [mISDN_core] [ 9914.939789] [<c02461e8>] opost+0x171/0x182 [ 9914.939789] [<c0114775>] __wake_up+0x29/0x39 [ 9914.939789] [<c02f6615>] sock_ioctl+0x1b5/0x1d9 [ 9914.939789] [<c02f6460>] sock_ioctl+0x0/0x1d9 [ 9914.939789] [<c016794c>] vfs_ioctl+0x1c/0x5d [ 9914.939789] [<c0167bcb>] do_vfs_ioctl+0x23e/0x24e [ 9914.939789] [<c0167c07>] sys_ioctl+0x2c/0x45 [ 9914.939789] [<c0102cbd>] sysenter_do_call+0x12/0x21 [ 9914.939789] [<c0350000>] pci_fixup_i450gx+0x4e/0x56 [ 9914.939789] ======================= [ 9914.939789] Code: 00 68 02 f0 f9 f8 e8 ae b4 2c c7 8b 44 24 04 5a 59 c3 83 ec 04 31 d2 89 04 24 89 e1 b8 ac df fa f8 68 e0 f4 f9 f8 e8 4a b5 2c c7 <8b> 80 d4 00 00 00 5a 59 c3 53 89 cb 8d 90 9c 00 00 00 89 c8 e8 [ 9914.939789] EIP: [<f8f9f2dd>] get_mdevice+0x19/0x22 [mISDN_core] SS:ESP 0068:f5adbef4 [ 9914.939858] ---[ end trace 50e18a715b019424 ]--- Signed-off-by: Martin Bachem <m.bachem@gmx.de> Signed-off-by: Karsten Keil <kkeil@suse.de>
2009-01-11sparc64: Fix cpumask related build failureDavid Miller
cpumask_of_pcibus() was missing - this triggers on NUMA builds. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11kernel/sched.c: add missing forward declaration for 'double_rq_lock'Steven Noonan
Impact: build fix on certain configs Added 'double_rq_lock' forward declaration, allowing double_rq_lock to be used in _double_lock_balance(). Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11Merge commit 'v2.6.29-rc1' into sched/urgentIngo Molnar
2009-01-11MIPS: Only write c0_framemask on CPUs which have this register.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: new userspace suspend interface for development boards.Manuel Lauss
Replace the current sysctl-based suspend interface with a new sysfs- based one which also uses the Linux-2.6 suspend model. To configure wakeup sources, a subtree for the demoboards is created under /sys/power/db1x: sys/ `-- power `-- db1x |-- gpio0 |-- gpio1 |-- gpio2 |-- gpio3 |-- gpio4 |-- gpio5 |-- gpio6 |-- gpio7 |-- timer |-- timer_timeout |-- wakemsk `-- wakesrc The nodes 'gpio[0-7]' and 'timer' configure the GPIO0..7 and M2 bits of the SYS_WAKEMSK (wakeup source enable) register. Writing '1' enables a wakesource, 0 disables it. The 'timer_timeout' node holds the timeout in seconds after which the TOYMATCH2 event should wake the system. The 'wakesrc' node holds the SYS_WAKESRC register after wakeup (in hex), the 'wakemsk' node can be used to get/set the wakeup mask directly. For example, to have the timer wake the system after 10 seconds of sleep, the following must be done in userspace: echo 10 > /sys/power/db1x/timer_timeout echo 1 > /sys/power/db1x/timer echo mem > /sys/power/sleep This patch also removes the homebrew CPU frequency switching code. I don't understand how it could have ever worked reliably; it does not communicate the clock changes to peripheral devices other than uarts. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/alchemy/devboards/pm.c
2009-01-11MIPS: Alchemy: dbdma suspend/resume support.Manuel Lauss
Implement suspend/resume for DBDMA controller and its channels. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: Fix up PM code on Au1550/Au1200Manuel Lauss
Au1550/Au1200 have a different memory controller which requires additi- onal code to properly put memory to sleep (code taken from AMD/RMI's Linux-2.6.11 source package). Also fix up the remaining pm-related paths to compile on Au1200/Au1550 platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: move calc_clock function.Manuel Lauss
Now that nothing in time.c depends on calc_clock, it can be moved to clocks.c where it belongs. While at it, give it a better non-generic name and call it as soon as possible in plat_mem_init. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: RTC counter clocksource / clockevent support.Manuel Lauss
Add support for the 32 kHz counter1 (RTC) as clocksource / clockevent device. As a nice side effect, this also enables use of the 'wait' instruction for runtime idle power savings. If the counters aren't enabled/working properly, fall back on the cp0 counter clock code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: make cp0 counter clocksource/event usable as fallback.Manuel Lauss
The current mips clock build infrastructure lets a system only use either the MIPS cp0 counter or a SoC specific timer as a clocksource / clockevent device. This patch renames the core cp0 counter clocksource / clockevent functions from mips_* to r4k_* and updates the wrappers in asm-mips/time.h to call these renamed functions instead. Chips which can detect whether it is safe to use a chip-specific timer can now fall back on the cp0 counter if necessary and possible (e.g. Alchemy with a follow-on patch). Existing behaviour is not changed in any way. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: remove cpu_table.Manuel Lauss
Remove the cpu_table: - move detection of whether c0_config[OD] is read-only and should be set to fix various chip errata to au1000 headers. - move detection of write-only sys_cpupll to au1000 headers. - remove the BCLK switching code: Activation of this features should be left to the boards using the chips since it also affects external devices tied to BCLK, and only the board designers know whether it is safe to enable. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/cputable.c
2009-01-11MIPS: Alchemy: remove get/set_au1x00_lcd_clock().Manuel Lauss
There are no in-tree users, so remove them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Print irq handler descriptionManuel Lauss
Add the name set by set_irq_chip_and_handler_name() to the output of /proc/interrupts, like so: db1200 ~ # cat /proc/interrupts CPU0 8: 52 Alchemy-IC0-hilevel serial 10: 171 Alchemy-IC0-hilevel au1xxx-mmc 11: 47 Alchemy-IC0-hilevel Au1xxx dbdma 18: 1 Alchemy-IC0-hilevel au1550-spi 29: 1250997 Alchemy-IC0-riseedge timer 37: 211 Alchemy-IC0-hilevel ehci_hcd:usb1, ohci_hcd:usb2 38: 0 Alchemy-IC0-hilevel lcd 72: 2623 DB1200 CPLD-level ide0 73: 257 DB1200 CPLD-level eth0 84: 1 DB1200 CPLD-level sd_insert 85: 0 DB1200 CPLD-level sd_eject ERR: 0 Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: pb1200: update CPLD cascade irq handler.Manuel Lauss
Tested on Db1200. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: update core interrupt code.Manuel Lauss
This patch attempts to modernize core Alchemy interrupt handling code. - add irq_chips for irq controllers instead of irq type, - add a set_type() hook to change irq trigger type during runtime, - add a set_wake() hook to control GPIO0..7 based wakeup, - use linux' IRQF_TRIGGER_ constants instead of homebrew ones, - enable GENERIC_HARDIRQS_NO__DO_IRQ. - simplify plat_irq_dispatch - merge au1xxx_irqmap into irq.c file, the only place where its contents are referenced. - board_init_irq() is now mandatory for every board; use it to register the remaining (gpio-based) interrupt sources; update all boards accordingly. Run-tested on Db1200 and other Au1200 based platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c
2009-01-11MIPS: Alchemy: move commandline mangling out of common codeManuel Lauss
Not every alchemy-based board might want these options forced on it, and most of this stuff seems to be intended for devboard code anyway. Remove commandline mangling code out of common chip code and instead add relevant sections to all in-tree boards to not change existing behaviour. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: devboards: consolidate filesManuel Lauss
Share some code and merge small files: - Extract the prom init code from all devboard files (they only differ in memory configuration). - Merge the irq configuration into board setup code. - Merge smaller files into board setup code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/devboards/db1x00/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1000/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1000/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1100/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1100/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1200/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1500/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1500/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1550/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1550/irqmap.c create mode 100644 arch/mips/alchemy/devboards/prom.c
2009-01-11MIPS: Alchemy: Move development board code to common subdirectoryManuel Lauss
This should ease sharing of common devboard code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON to arch/mips/KconfigDavid Daney
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add defconfig for Cavium OCTEON.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Adjust the dma-common.c platform hooks.David Daney
We add a dev parameter to plat_unmap_dma_mem(), and hooks for plat_dma_supported() and plat_extra_sync_for_device() which should be nop changes for all existing targets. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON slot into proper tlb category.David Daney
Expand the case statement for build_tlb_write_entry so that it does the right thing on Cavium CPU variants. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Compute branch returns for Cavium OCTEON specific branch instructions.David Daney
For Cavium OCTEON, compute the return epc value for OCTEON specific branch instructions. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Cavium OCTEON multiplier state preservation.David Daney
For OCTEON, implement a save and restore of the multiplier state across context switches. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add SMP_ICACHE_FLUSH for the Cavium CPU family.David Daney
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON specific registers to ptrace.h and asm-offsets.cDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON cop2/cvmseg state entries to processor.h.David Daney
Add in the cop2 and cvmseg state info to the known proc reg data for Cavium so that it can be tracked, saved, restored. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v0.10.2 at 2024-11-16 12:03:03 (GMT)