summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-11ASoC: fsl-sai: convert to use regmap API for Freeacale SAIXiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 78957fc349bcf29d415a649601581a993ff25e4d Change-Id: I29156c937a15a11c6b46d83fbcaab6e1afe1b767 Reviewed-on: http://git.am.freescale.net:8181/19751 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl-sai: Clean up the codeXiubo Li
Makes the code slightly shorter. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 633ff8f8a4393b4a13b94eddd2613198c32035e6 Change-Id: Ic59247589f69e0705d49fc4db9e7d269125856d8 Reviewed-on: http://git.am.freescale.net:8181/19750 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: fix the endianess for SAI fifo data.Xiubo Li
Revert the SAI's endianess for fifo data to/from DMA engine. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 72aa62bed3ea30635156fad95f123a0b665072bf Change-Id: I7c8ec99b9d8292527ba2fc47ff071146b2225fae Reviewed-on: http://git.am.freescale.net:8181/19749 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Fix one bug for hardware limitation.Xiubo Li
This is maybe one bug or a limitation of the hardware that the {T,R}CR2's Synchronous Mode bits must be set as late as possible, or the SAI device maybe hanged up, and there has not any explaination about this limitation in the SAI Data Sheet. And the {T,R}CR2's Synchronous Mode bits must be set at the same time whether for Tx or Rx stream. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 496a39d9ec238569fac6daceac8f5420c5edc2f1 Change-Id: Ib09d153b20251254277f3efacdc5d5b5d8f8425b Reviewed-on: http://git.am.freescale.net:8181/19748 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Add disable operation for the corresponding data channel.Xiubo Li
Enables/Disables the corresponding data channel for tx/rx operation. A channel must be enabled before its FIFO is accessed, and then disable it when tx/rx is stopped or idle. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit e5d0fa9c3ec59a40e0285d96b65b7f62875acd42 Change-Id: I44a321c2f74580bc6387688777434c88f027c17b Reviewed-on: http://git.am.freescale.net:8181/19747 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Move the global registers setting to _dai_probe()Xiubo Li
Because we cannot make sure which one of _dai_fmt() and _dai_sysclk() will be firstly called. So move the RCSR/TCSR and TCR1/RCR1's initialization to _dai_probe(), and this can make sure that before any of {T,R}CR{1~5} register to be set the RCSR/TCSR's RE/TE bit has been cleared for the hareware limitation. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit e6dc12d7198eddba2e3e7a13feab5c7edde7ba1d Change-Id: Ie77345f4a2d84d55443e84d1c4cb2d2a9db766d0 Reviewed-on: http://git.am.freescale.net:8181/19746 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Sort local variable in general wayNicolin Chen
Generally we would write code for local variable like: static new_func() { struct xxx *yyy; ... int ret; } But this driver only follows this pattern for some functions, not all. Thus this patch sorts the local variable in the general way. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 4e3a99f5b004b30bc604d82e5498700649148e0d Change-Id: Idcc0aea15b8b1daca140b05c5c9655cea43746b6 Reviewed-on: http://git.am.freescale.net:8181/19745 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Make dev_err information neaterNicolin Chen
Since using dev_err() there's no need to mention SAI any more, it will print the full name of the driver -- fsl_sai. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 190af12dad975f2ea7d69d1c5c9d36fec64da767 Change-Id: I2a186ded87bcafa273f99840e2eadb9e9ed63eba Reviewed-on: http://git.am.freescale.net:8181/19744 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Drop useless ret in startup()Nicolin Chen
We can save this ret to make the code neater. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 15b29dae6604d2d2daf586429ff12f26272a868a Change-Id: Ib5d7742e67c1bf4a1e72bcf887fe8fe07250c900 Reviewed-on: http://git.am.freescale.net:8181/19743 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Drop useless channels check in hw_params()Nicolin Chen
SAi only supports two data channels on hardware level and the driver also does register the min->1 and max->2, so no need to check channels. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit d22e28cce80a93578787d273bf1fa26a2be2636b Change-Id: Ia3f1e1375c9a69d7f0259af8e801594be7b464e2 Reviewed-on: http://git.am.freescale.net:8181/19742 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Use snd_pcm_format_width()Nicolin Chen
Use common helper function snd_pcm_format_width() to make code neater. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 1d7003092771bd2feec30e2f3e5a06aa33479e08 Change-Id: I6baf4f7c72a0d9f6aa332745f9251069c9600ab4 Reviewed-on: http://git.am.freescale.net:8181/19741 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Keep symmetry for clk_enable() and clk_disable()Nicolin Chen
There are two functions haven't clk_disable_unprepare() if having error. Thus fix them. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 1fb2d9d7465bcbb519c582fa4a3bd04ff4fce2d2 Change-Id: Ia4a2525d2e32949f2092fcd4de86d46ada27b096 Reviewed-on: http://git.am.freescale.net:8181/19740 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl-sai: Remove fsl_sai_remove()Xiubo Li
There is no need of this function and makes the code slightly shorter Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit a6af47ae5399baf4f5a2426b2121c1bcb9da4019 Change-Id: I194d8ebdd181be51985a2440b7da038ba933dc5c Reviewed-on: http://git.am.freescale.net:8181/19739 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: Add SAI SoC Digital Audio Interface driver.Xiubo Li
This adds Freescale SAI ASoC Audio support. This implementation is only compatible with device tree definition. Features: o Supports playback/capture o Supports 16/20/24 bit PCM o Supports 8k - 96k sample rates o Supports master and slave mode. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 4355082149429d1f87b6fbfc3ebc6305a5372ce2 Change-Id: Id2c5064a47530ea7cf3e1442267efcbc8bef0f06 Reviewed-on: http://git.am.freescale.net:8181/19738 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11watchdog: imx2_wdt: adds big endianness support.Xiubo Li
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs WDT endian mode ------------------------------------ IMX2+ LE Vybird LE LS1 BE LS2 LE Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> --- This patch is pulled back from upstream: commit f728f4bfc495a588abda4661c09595112677be25 Change-Id: I679a13328e7ee02fbc23dad99a3e672c6186fc4c Reviewed-on: http://git.am.freescale.net:8181/19717 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11watchdog: imx2_wdt: convert to use regmap API.Xiubo Li
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs CPU endian mode WDT endian mode ------------------------------------------------ IMX2+ LE LE Vybird LE LE LS1 LE BE LS2 LE LE Other possible SoCs: SoCs CPU endian mode WDT endian mode ------------------------------------------------ Soc1 BE BE Soc2 BE LE And also the watchdog's registers will be 32-bits for some versions, and though it is 16-bits in IMX2+, Vybird and LS+. Using the regmap APIs, could be more easy to support different endianness and also more easy to support 32-bits version... Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> --- This patch is pulled back from upstream: commit a7977003293ed0c13e62d95fc8cd1d20e22b7282 Change-Id: I3dbc53e41d656ba039e6fa5b1a0aacfdb6021446 Reviewed-on: http://git.am.freescale.net:8181/19716 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11watchdog: imx2_wdt: Sort the header files alphabeticallyXiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> --- This patch is pulled back from upstream: commit 30cb042a846353929042d93d13c9f8e1e5227aa7 Change-Id: I1135180b413b9b194a54449aa276b1e64c88248b Reviewed-on: http://git.am.freescale.net:8181/19715 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11watchdog: imx2_wdt: disable watchdog timer during low power modeXiubo Li
We should set watchdog timer to be disabled in low power mode, as there is no service running in background, otherwise, system will reset unexpected. Signed-off-by: Anson Huang <b20788@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> --- This patch is pulled back from upstream: commit 1a9c5efa576eccadd2836a1e53dcea21f999c180 Change-Id: I17444286a483479bc47c4e2e449881d8bac1c221 Reviewed-on: http://git.am.freescale.net:8181/19714 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11gianfar: Fix the section mismatch warnings.Xiubo Li
Building with CONFIG_DEBUG_SECTION_MISMATCH enabled, the following WARNING is occured: LD drivers/net/built-in.o WARNING: drivers/net/built-in.o(.text+0xcd4c): Section mismatch in reference from the function gfar_probe() to the function .init.text:gfar_init_addr_hash_table() The function gfar_probe() references the function __init gfar_init_addr_hash_table(). This is often because gfar_probe lacks a __init annotation or the annotation of gfar_init_addr_hash_table is wrong. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> --- This patch is pulled back from upstream: commit 898157ed7473683d515532f9f14bfd2f7743ccd2 Change-Id: If9e87dfccedd8d3eb9e0467ad14b7a940b17249f Reviewed-on: http://git.am.freescale.net:8181/19676 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11regmap: mmio: Add regmap_mmio_regbits_check.Xiubo Li
Fix the support for 1/2/8 bytes wide register address checking. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 451485ba6bfbed36220b9e710fca0525f62e771d Change-Id: I3950b3721b3998d3cdb7e6cac69ec0b4a65c3efb Reviewed-on: http://git.am.freescale.net:8181/19675 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11regmap: mmio: Fix the bug of 'offset' value parsing.Xiubo Li
'offset = *(u32 *)reg;' This will be okey for 32/64-bits register device, but for 8/16-bits register ones, the 'offset' value will overflow, for example: The IMX2 Watchdog, whose registers and values are all 16-bits: If the IO base virtual address is ctx->regs = 0x888c0000, and the now doing the 0x00 register accessing: Using 'offset = *(u32 *)reg' the offset value will possiblly be 0x77310000, Using 'offset = *(u16 *)reg' the offset value will be 0x0000. In the regmap_mmio_gather_write(), ctx->regs + 0x7731000 will be 0xffbd0000, but actually it should be ctx->regs + 0x0000 = 0x888c0000. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 88cb32c657ed13dc29561d0f4aa154e0fd25759f Change-Id: Iddbdf33a3831062b250dfdc1e2067712d1153182 Reviewed-on: http://git.am.freescale.net:8181/19674 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11regmap: mmio: Add support for 1/2/8 bytes wide register address.Xiubo Li
Since regmap core and mmio have already support for 1/2/8 bytes wide values, so adds support for 1/2/8 bytes wide registers address. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 932580409a9dacbf42215fa737bf06ae2c0aa624 Change-Id: I148882774797f7a53d6123d0b5dd757231025b6e Reviewed-on: http://git.am.freescale.net:8181/19673 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11regmap: mmio: add regmap_mmio_{regsize, count}_check.Xiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 41b0c2c976a8758a2b7f5b14cbc5d1a7436932cc Change-Id: I8446ffd9118e759cb68784dd0ee59e9382c698ec Reviewed-on: http://git.am.freescale.net:8181/19672 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11hwmon: (ltc2945) Fix 1st comment lineGuenter Roeck
Somehow a couple of spaces got added to the first line. Remove them. No code change. Signed-off-by: Guenter Roeck <linux@roeck-us.net> (cherry picked from commit 86b89d73f9f3648c9f3b375d7841bef18a27fd2a) Change-Id: Ic8011315767d9979151c08fc22e483eb01ae1f3b Reviewed-on: http://git.am.freescale.net:8181/19636 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11hwmon: (ltc2945) Don't crash the kernel unnecessarilyGuenter Roeck
An implementation error should not crash the kernel if it is avoidable. Replace BUG() with WARN_ONCE(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> (cherry picked from commit f75d72309192e52ef9a3efb390b1c4f408c142df) Change-Id: Ib1d20bb2f35fd6f5c551f137102dbd12c68aa489 Reviewed-on: http://git.am.freescale.net:8181/19635 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11hwmon: Driver for Linear Technologies LTC2945Guenter Roeck
LTC2945 is a system monitor that measures current, voltage, and power. Signed-off-by: Guenter Roeck <linux@roeck-us.net> (cherry picked from commit 6700ce035f830149d48c270d84736debfb67179e) Change-Id: I7d658c4e03f5e9108fbf1e407b3f1bdecda7ef1d Reviewed-on: http://git.am.freescale.net:8181/19634 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11hwmon: Do not accept invalid name attributesGuenter Roeck
hwmon name attributes must not include '-', as specified in Documentation/hwmon/sysfs-interface. Also filter out spaces, tabs, wildcards, and newline characters. Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> (cherry picked from commit 648cd48c9e566f53c5df30d79857e0937ae13b09) Change-Id: Ib723f0a5304212bede9017bf63326aa2a59b6bc5 Reviewed-on: http://git.am.freescale.net:8181/19633 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11hwmon: Provide managed hwmon registrationGuenter Roeck
Drivers using the new hwmon_device_register_with_groups API often have a remove function which consists solely of a call hwmon_device_unregister(). Provide support for devm_hwmon_device_register_with_groups and devm_hwmon_device_unregister to allow this repeated code to be removed and help eliminate error handling code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> (cherry picked from commit 74188cba088192e14cd7fd5433876e8c947bcdd8) Change-Id: I7a2eca21e6a32bacbc55a979b630f10d19508abc Reviewed-on: http://git.am.freescale.net:8181/19632 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11hwmon: Introduce hwmon_device_register_with_groupsGuenter Roeck
hwmon_device_register_with_groups() lets callers register a hwmon device together with all sysfs attributes in a single call. When using hwmon_device_register_with_groups(), hwmon attributes are attached to the hwmon device directly and no longer with its parent device. Signed-off-by: Guenter Roeck <linux@roeck-us.net> (cherry picked from commit bab2243ce1897865e31ea6d59b0478391f51812b) Change-Id: I7612ae8cae84fd24122ca8fd91acba1a11784932 Reviewed-on: http://git.am.freescale.net:8181/19631 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm : dts : ls1021a : Remove unwanted code from USB2.0 dts nodeNikhil Badola
Remove #address-cells and #size-cells from USB 2.0 node in ls1021a Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Change-Id: Ia2ff9aea201ef18b352437bda267571c235db689 Reviewed-on: http://git.am.freescale.net:8181/15675 Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11mtd: spi-nor: drop \t after #defineBrian Norris
Spacing is a little non-standard here. Fix up tabs vs. spaces. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Change-Id: I3b31d8ffd4ce9c2be8a6e8d765f9ca829bc8d3d0 Reviewed-on: http://git.am.freescale.net:8181/15512 Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11mtd: spi-nor: add the copyright informationHuang Shijie
Add the copyright information for spi-nor.c and spi-nor.h. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Change-Id: Idde8bf06ec19e581234865b700207ee60e953755 Reviewed-on: http://git.am.freescale.net:8181/15511 Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11mtd: spi-nor: EXPORT symbols which could be used by module driversBrian Norris
Fix errors like this: ERROR: "spi_nor_ids" [drivers/mtd/devices/m25p80.ko] undefined! ERROR: "spi_nor_scan" [drivers/mtd/devices/m25p80.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Brian Norris <computersforpeace@gmail.com> Change-Id: I61a5d463500e2646dbb10dbab543550bf1ef009e Reviewed-on: http://git.am.freescale.net:8181/15510 Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11mtd: spi-nor: Add Freescale QuadSPI driverHuang Shijie
(0) What is the QuadSPI controller? The QuadSPI(Quad Serial Peripheral Interface) acts as an interface to one single or two external serial flash devices, each with up to 4 bidirectional data lines. (1) The QuadSPI controller is driven by the LUT(Look-up Table) registers. The LUT registers are a look-up-table for sequences of instructions. A valid sequence consists of four LUT registers. (2) The definition of the LUT register shows below: --------------------------------------------------- | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | --------------------------------------------------- There are several types of INSTRx, such as: CMD : the SPI NOR command. ADDR : the address for the SPI NOR command. DUMMY : the dummy cycles needed by the SPI NOR command. .... There are several types of PADx, such as: PAD1 : use a singe I/O line. PAD2 : use two I/O lines. PAD4 : use quad I/O lines. .... (3) Test this driver with the JFFS2 and UBIFS: For jffs2: ------------- #flash_eraseall /dev/mtd0 #mount -t jffs2 /dev/mtdblock0 tmp #bonnie++ -d tmp -u 0 -s 10 -r 5 For ubifs: ------------- #flash_eraseall /dev/mtd0 #ubiattach /dev/ubi_ctrl -m 0 #ubimkvol /dev/ubi0 -N test -m #mount -t ubifs ubi0:test tmp #bonnie++ -d tmp -u 0 -s 10 -r 5 Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Change-Id: Ie32163e49eb62af82bf311e9165363a2f8880841 Reviewed-on: http://git.am.freescale.net:8181/15509 Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11mtd: spi-nor: add a helper to find the spi_device_idHuang Shijie
Add the spi_nor_match_id() to find the proper spi_device_id with the NOR flash's name in the spi_nor_ids table. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Change-Id: I471348a87ccde741055745d14cd25c84b480a803 Reviewed-on: http://git.am.freescale.net:8181/15508 Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11mtd: spi-nor: add the framework for SPI NORHuang Shijie
This patch cloned most of the m25p80.c. In theory, it adds a new spi-nor layer. Before this patch, the layer is like: MTD ------------------------ m25p80 ------------------------ spi bus driver ------------------------ SPI NOR chip After this patch, the layer is like: MTD ------------------------ spi-nor ------------------------ m25p80 ------------------------ spi bus driver ------------------------ SPI NOR chip With the spi-nor controller driver(Freescale Quadspi), it looks like: MTD ------------------------ spi-nor ------------------------ fsl-quadspi ------------------------ SPI NOR chip New APIs: spi_nor_scan: used to scan a spi-nor flash. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> [Brian: rebased to include additional m25p_ids[] entry] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Change-Id: I7c22c4c83350eac8c325ccd8292450fde79bb069 Reviewed-on: http://git.am.freescale.net:8181/15507 Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11mtd: spi-nor: add the basic data structuresHuang Shijie
The spi_nor{} is cloned from the m25p{}. The spi_nor{} can be used by both the m25p80 and spi-nor controller. We also add the spi_nor_xfer_cfg{} which can be used by the two fundamental primitives: read_xfer/write_xfer. 1) the hooks for spi_nor{}: @prepare/unpreare: used to do some work before or after the read/write/erase/lock/unlock. @read_xfer/write_xfer: We can use these two hooks to code all the following hooks if the driver tries to implement them by itself. @read_reg: used to read the registers, such as read status register, read configure register. @write_reg: used to write the registers, such as write enable, erase sector. @read_id: read out the ID info. @wait_till_ready: wait till the NOR becomes ready. @read: read out the data from the NOR. @write: write data to the NOR. @erase: erase a sector of the NOR. 2) Add a new field sst_write_second for the SST NOR write. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Change-Id: I9c1e7766886c973c540342ad03f8d90430cc66a3 Reviewed-on: http://git.am.freescale.net:8181/15506 Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11mtd: spi-nor: copy the SPI NOR commands to a new header fileHuang Shijie
This patch adds a new header :spi-nor.h, and copies all the SPI NOR commands and relative macros into this new header. This hearder can be used by the m25p80.c and other spi-nor controller, such as Freescale's Quadspi. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Change-Id: Ifd2b736d43fd58666e1fa163d39caa816c3b5375 Reviewed-on: http://git.am.freescale.net:8181/15505 Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11dmaengine: fsl-edma: add S/G support for big-endian eDMA modelJingchang Lu
The hardware Scatter/Gather requires the to-be auto loaded TCDs struct in memory retains the same endian as the core independent of the model's register endian, the auto load engine will do the swap if need. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: I4251239bd06a64c166873f05e5799d95b267ead8 Reviewed-on: http://git.am.freescale.net:8181/19200 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: caam - Dynamic allocation of addresses for various memory blocks in ↵Nitesh Narayan Lal
CAAM. CAAM's memory is broken into following address blocks: Block Included Registers 0 General Registers 1-4 Job ring registers 6 RTIC registers 7 QI registers 8 DECO and CCB Size of the above stated blocks varies in various platforms. The block size can be 4K or 64K. The block size can be dynamically determined by reading CTPR register in CAAM. This patch initializes the block addresses dynamically based on the value read from this register. Signed-off-by: Ruchika Gupta <r66431@freescale.com> Signed-off-by: Nitesh Narayan Lal <b44382@freescale.com> Change-Id: I0ff5e5fe947134c56014544f335843dcc1595259 Reviewed-on: http://git.am.freescale.net:8181/17748 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: caam - fix uninitialized state->buf_dma fieldHoria Geanta
state->buf_dma not being initialized can cause try_buf_map_to_sec4_sg to try to free unallocated DMA memory: caam_jr ffe301000.jr: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000002eb15068] [size=0 bytes] WARNING: at lib/dma-debug.c:1080 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 1387 Comm: cryptomgr_test Tainted: G W 3.16.0-rc1 #23 task: eed24e90 ti: eebd0000 task.ti: eebd0000 NIP: c02889fc LR: c02889fc CTR: c02d7020 REGS: eebd1a50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00029002 <CE,EE,ME> CR: 44042082 XER: 00000000 GPR00: c02889fc eebd1b00 eed24e90 0000008d c1de3478 c1de382c 00000000 00029002 GPR08: 00000007 00000000 01660000 00000000 24042082 00000000 c07a1900 eeda2a40 GPR16: 005d62a0 c078ad4c 00000000 eeb15068 c07e1e10 c0da1180 00029002 c0d97408 GPR24: c62497a0 00000014 eebd1b58 00000000 c078ad4c ee130210 00000000 2eb15068 NIP [c02889fc] check_unmap+0x8ac/0xab0 LR [c02889fc] check_unmap+0x8ac/0xab0 Call Trace: [eebd1b00] [c02889fc] check_unmap+0x8ac/0xab0 (unreliable) --- Exception: 0 at (null) LR = (null) [eebd1b50] [c0288c78] debug_dma_unmap_page+0x78/0x90 (unreliable) [eebd1bd0] [f956f738] ahash_final_ctx+0x6d8/0x7b0 [caamhash] [eebd1c30] [c022ff4c] __test_hash+0x2ac/0x6c0 [eebd1de0] [c0230388] test_hash+0x28/0xb0 [eebd1e00] [c02304a4] alg_test_hash+0x94/0xc0 [eebd1e20] [c022fa94] alg_test+0x114/0x2e0 [eebd1ea0] [c022cd1c] cryptomgr_test+0x4c/0x60 [eebd1eb0] [c00497a4] kthread+0xc4/0xe0 [eebd1f40] [c000f2fc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 41de01c8 80a9002c 2f850000 40fe0008 80a90008 80fa0018 3c60c06d 811a001c 3863f4a4 813a0020 815a0024 4830cd01 <0fe00000> 81340048 2f890000 40feff48 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit de0e35ec2b72be30892f28a939c358af1df4fa2c) Change-Id: I7a3df37981b64f28191fee3f91332c371a179fc1 Reviewed-on: http://git.am.freescale.net:8181/17747 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: caam - fix uninitialized edesc->dst_dma fieldHoria Geanta
dst_dma not being properly initialized causes ahash_done_ctx_dst to try to free unallocated DMA memory: caam_jr ffe301000.jr: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000006513340] [size=28 bytes] WARNING: at lib/dma-debug.c:1080 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 1373 Comm: cryptomgr_test Tainted: G W 3.16.0-rc1 #23 task: ee23e350 ti: effd2000 task.ti: ee1f6000 NIP: c02889fc LR: c02889fc CTR: c02d7020 REGS: effd3d50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00029002 <CE,EE,ME> CR: 44048082 XER: 00000000 GPR00: c02889fc effd3e00 ee23e350 0000008e c1de3478 c1de382c 00000000 00029002 GPR08: 00000007 00000000 01660000 00000000 24048082 00000000 00000018 c07db080 GPR16: 00000006 00000100 0000002c eeb4a7e0 c07e1e10 c0da1180 00029002 c0d9b3c8 GPR24: eeb4a7c0 00000000 effd3e58 00000000 c078ad4c ee130210 00000000 06513340 NIP [c02889fc] check_unmap+0x8ac/0xab0 LR [c02889fc] check_unmap+0x8ac/0xab0 Call Trace: [effd3e00] [c02889fc] check_unmap+0x8ac/0xab0 (unreliable) [effd3e50] [c0288c78] debug_dma_unmap_page+0x78/0x90 [effd3ed0] [f94b89ec] ahash_done_ctx_dst+0x11c/0x200 [caamhash] [effd3f00] [c0429640] caam_jr_dequeue+0x1c0/0x280 [effd3f50] [c002c94c] tasklet_action+0xcc/0x1a0 [effd3f80] [c002cb30] __do_softirq+0x110/0x220 [effd3fe0] [c002cf34] irq_exit+0xa4/0xe0 [effd3ff0] [c000d834] call_do_irq+0x24/0x3c [ee1f7ae0] [c000489c] do_IRQ+0x8c/0x110 [ee1f7b00] [c000f86c] ret_from_except+0x0/0x18 --- Exception: 501 at _raw_spin_unlock_irq+0x30/0x50 LR = _raw_spin_unlock_irq+0x2c/0x50 [ee1f7bd0] [c0590158] wait_for_common+0xb8/0x170 [ee1f7c10] [c059024c] wait_for_completion_interruptible+0x1c/0x40 [ee1f7c20] [c022fc78] do_one_async_hash_op.isra.2.part.3+0x18/0x40 [ee1f7c30] [c022ffb8] __test_hash+0x318/0x6c0 [ee1f7de0] [c0230388] test_hash+0x28/0xb0 [ee1f7e00] [c02304a4] alg_test_hash+0x94/0xc0 [ee1f7e20] [c022fa94] alg_test+0x114/0x2e0 [ee1f7ea0] [c022cd1c] cryptomgr_test+0x4c/0x60 [ee1f7eb0] [c00497a4] kthread+0xc4/0xe0 [ee1f7f40] [c000f2fc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 41de01c8 80a9002c 2f850000 40fe0008 80a90008 80fa0018 3c60c06d 811a001c 3863f4a4 813a0020 815a0024 4830cd01 <0fe00000> 81340048 2f890000 40feff48 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit 76b99080ccc964163b4567fac2bb8619f5ed789f) Change-Id: I8eb93e0c4282d45d70b67941cea62441221df845 Reviewed-on: http://git.am.freescale.net:8181/17746 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: caam - fix uninitialized S/G table size in ahash_digestHoria Geanta
Not initializing edesc->sec4_sg_bytes correctly causes ahash_done callback to free unallocated DMA memory: caam_jr ffe301000.jr: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x300900000000b44d] [size=46158 bytes] WARNING: at lib/dma-debug.c:1080 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 1358 Comm: cryptomgr_test Tainted: G W 3.16.0-rc1 #23 task: eed04250 ti: effd2000 task.ti: c6046000 NIP: c02889fc LR: c02889fc CTR: c02d7020 REGS: effd3d50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00029002 <CE,EE,ME> CR: 44048082 XER: 00000000 GPR00: c02889fc effd3e00 eed04250 00000091 c1de3478 c1de382c 00000000 00029002 GPR08: 00000007 00000000 01660000 00000000 22048082 00000000 00000018 c07db080 GPR16: 00000006 00000100 0000002c ee2497e0 c07e1e10 c0da1180 00029002 c0d912c8 GPR24: 00000014 ee2497c0 effd3e58 00000000 c078ad4c ee130210 30090000 0000b44d NIP [c02889fc] check_unmap+0x8ac/0xab0 LR [c02889fc] check_unmap+0x8ac/0xab0 Call Trace: [effd3e00] [c02889fc] check_unmap+0x8ac/0xab0 (unreliable) [effd3e50] [c0288c78] debug_dma_unmap_page+0x78/0x90 [effd3ed0] [f9404fec] ahash_done+0x11c/0x190 [caamhash] [effd3f00] [c0429640] caam_jr_dequeue+0x1c0/0x280 [effd3f50] [c002c94c] tasklet_action+0xcc/0x1a0 [effd3f80] [c002cb30] __do_softirq+0x110/0x220 [effd3fe0] [c002cf34] irq_exit+0xa4/0xe0 [effd3ff0] [c000d834] call_do_irq+0x24/0x3c [c6047ae0] [c000489c] do_IRQ+0x8c/0x110 [c6047b00] [c000f86c] ret_from_except+0x0/0x18 --- Exception: 501 at _raw_spin_unlock_irq+0x30/0x50 LR = _raw_spin_unlock_irq+0x2c/0x50 [c6047bd0] [c0590158] wait_for_common+0xb8/0x170 [c6047c10] [c059024c] wait_for_completion_interruptible+0x1c/0x40 [c6047c20] [c022fc78] do_one_async_hash_op.isra.2.part.3+0x18/0x40 [c6047c30] [c022ff98] __test_hash+0x2f8/0x6c0 [c6047de0] [c0230388] test_hash+0x28/0xb0 [c6047e00] [c0230458] alg_test_hash+0x48/0xc0 [c6047e20] [c022fa94] alg_test+0x114/0x2e0 [c6047ea0] [c022cd1c] cryptomgr_test+0x4c/0x60 [c6047eb0] [c00497a4] kthread+0xc4/0xe0 [c6047f40] [c000f2fc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 41de01c8 80a9002c 2f850000 40fe0008 80a90008 80fa0018 3c60c06d 811a001c 3863f4a4 813a0020 815a0024 4830cd01 <0fe00000> 81340048 2f890000 40feff48 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit 45e9af78b1abb00b7c394a7ce4e72584c3ca0eb8) Change-Id: Id66573defe2b61fb9d33ed05de221e8524418508 Reviewed-on: http://git.am.freescale.net:8181/17745 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: caam - fix DMA direction mismatch in ahash_done_ctx_srcHoria Geanta
caam_jr ffe301000.jr: DMA-API: device driver frees DMA memory with different direction [device address=0x0000000006271dac] [size=28 bytes] [mapped with DMA_TO_DEVICE] [unmapped with DMA_FROM_DEVICE] ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:1131 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.16.0-rc1 #23 task: c0789380 ti: effd2000 task.ti: c07d6000 NIP: c02885cc LR: c02885cc CTR: c02d7020 REGS: effd3d50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00021002 <CE,ME> CR: 44048082 XER: 00000000 GPR00: c02885cc effd3e00 c0789380 000000c6 c1de3478 c1de382c 00000000 00021002 GPR08: 00000007 00000000 01660000 0000012f 84048082 00000000 00000018 c07db080 GPR16: 00000006 00000100 0000002c c62517a0 c07e1e10 c0da1180 00029002 c0d95f88 GPR24: c07a0000 c07a4acc effd3e58 ee322bc0 0000001c ee130210 00000000 c0d95f80 NIP [c02885cc] check_unmap+0x47c/0xab0 LR [c02885cc] check_unmap+0x47c/0xab0 Call Trace: [effd3e00] [c02885cc] check_unmap+0x47c/0xab0 (unreliable) [effd3e50] [c0288c78] debug_dma_unmap_page+0x78/0x90 [effd3ed0] [f9624d84] ahash_done_ctx_src+0xa4/0x200 [caamhash] [effd3f00] [c0429640] caam_jr_dequeue+0x1c0/0x280 [effd3f50] [c002c94c] tasklet_action+0xcc/0x1a0 [effd3f80] [c002cb30] __do_softirq+0x110/0x220 [effd3fe0] [c002cf34] irq_exit+0xa4/0xe0 [effd3ff0] [c000d834] call_do_irq+0x24/0x3c [c07d7d50] [c000489c] do_IRQ+0x8c/0x110 [c07d7d70] [c000f86c] ret_from_except+0x0/0x18 --- Exception: 501 at _raw_spin_unlock_irq+0x30/0x50 LR = _raw_spin_unlock_irq+0x2c/0x50 [c07d7e40] [c0053084] finish_task_switch+0x74/0x130 [c07d7e60] [c058f278] __schedule+0x238/0x620 [c07d7f70] [c058fb50] schedule_preempt_disabled+0x10/0x20 [c07d7f80] [c00686a0] cpu_startup_entry+0x100/0x1b0 [c07d7fb0] [c074793c] start_kernel+0x338/0x34c [c07d7ff0] [c00003d8] set_ivor+0x140/0x17c Instruction dump: 7d495214 7d294214 806a0010 80c90010 811a001c 813a0020 815a0024 90610008 3c60c06d 90c1000c 3863f764 4830d131 <0fe00000> 3c60c06d 3863f0f4 4830d121 ---[ end trace db1fae088c75c280 ]--- Mapped at: [<f96251bc>] ahash_final_ctx+0x14c/0x7b0 [caamhash] [<c022ff4c>] __test_hash+0x2ac/0x6c0 [<c0230388>] test_hash+0x28/0xb0 [<c02304a4>] alg_test_hash+0x94/0xc0 [<c022fa94>] alg_test+0x114/0x2e0 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit bc9e05f9e770b9c6a1bcc0cdee676e74e5a04fd2) Change-Id: I67764d2c3f2c4f7f6d155717a16d474d43a0c410 Reviewed-on: http://git.am.freescale.net:8181/17744 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: caam - fix DMA direction mismatch in ahash_done_ctx_dstHoria Geanta
caam_jr ffe301000.jr: DMA-API: device driver frees DMA memory with different direction [device address=0x00000000062ad1ac] [size=28 bytes] [mapped with DMA_FROM_DEVICE] [unmapped with DMA_TO_DEVICE] ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:1131 Modules linked in: caamhash(+) [last unloaded: caamhash] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.16.0-rc1 #23 task: c0789380 ti: effd2000 task.ti: c07d6000 NIP: c02885cc LR: c02885cc CTR: c02d7020 REGS: effd3d50 TRAP: 0700 Tainted: G W (3.16.0-rc1) MSR: 00021002 <CE,ME> CR: 44048082 XER: 00000000 GPR00: c02885cc effd3e00 c0789380 000000c6 c1de3478 c1de382c 00000000 00021002 GPR08: 00000007 00000000 01660000 0000012f 84048082 00000000 00000018 c07db080 GPR16: 00000006 00000100 0000002c eee567e0 c07e1e10 c0da1180 00029002 c0d96708 GPR24: c07a0000 c07a4acc effd3e58 ee29b140 0000001c ee130210 00000000 c0d96700 NIP [c02885cc] check_unmap+0x47c/0xab0 LR [c02885cc] check_unmap+0x47c/0xab0 Call Trace: [effd3e00] [c02885cc] check_unmap+0x47c/0xab0 (unreliable) [effd3e50] [c0288c78] debug_dma_unmap_page+0x78/0x90 [effd3ed0] [f9350974] ahash_done_ctx_dst+0xa4/0x200 [caamhash] [effd3f00] [c0429640] caam_jr_dequeue+0x1c0/0x280 [effd3f50] [c002c94c] tasklet_action+0xcc/0x1a0 [effd3f80] [c002cb30] __do_softirq+0x110/0x220 [effd3fe0] [c002cf34] irq_exit+0xa4/0xe0 [effd3ff0] [c000d834] call_do_irq+0x24/0x3c [c07d7d50] [c000489c] do_IRQ+0x8c/0x110 [c07d7d70] [c000f86c] ret_from_except+0x0/0x18 --- Exception: 501 at _raw_spin_unlock_irq+0x30/0x50 LR = _raw_spin_unlock_irq+0x2c/0x50 [c07d7e40] [c0053084] finish_task_switch+0x74/0x130 [c07d7e60] [c058f278] __schedule+0x238/0x620 [c07d7f70] [c058fb50] schedule_preempt_disabled+0x10/0x20 [c07d7f80] [c00686a0] cpu_startup_entry+0x100/0x1b0 [c07d7fb0] [c074793c] start_kernel+0x338/0x34c [c07d7ff0] [c00003d8] set_ivor+0x140/0x17c Instruction dump: 7d495214 7d294214 806a0010 80c90010 811a001c 813a0020 815a0024 90610008 3c60c06d 90c1000c 3863f764 4830d131 <0fe00000> 3c60c06d 3863f0f4 4830d121 ---[ end trace db1fae088c75c270 ]--- Mapped at: [<f9352454>] ahash_update_first+0x5b4/0xba0 [caamhash] [<c022ff28>] __test_hash+0x288/0x6c0 [<c0230388>] test_hash+0x28/0xb0 [<c02304a4>] alg_test_hash+0x94/0xc0 [<c022fa94>] alg_test+0x114/0x2e0 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit ef62b2310b4c783a70eba78f29695687d8cdc8df) Change-Id: I9059e608d14ac8c67897ed7b8c04851550de6f37 Reviewed-on: http://git.am.freescale.net:8181/17743 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: caam - fix DMA unmapping error in hash_digest_keyHoria Geanta
Key being hashed is unmapped using the digest size instead of initial length: caam_jr ffe301000.jr: DMA-API: device driver frees DMA memory with different size [device address=0x000000002eeedac0] [map size=80 bytes] [unmap size=20 bytes] ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:1090 Modules linked in: caamhash(+) CPU: 0 PID: 1327 Comm: cryptomgr_test Not tainted 3.16.0-rc1 #23 task: eebda5d0 ti: ee26a000 task.ti: ee26a000 NIP: c0288790 LR: c0288790 CTR: c02d7020 REGS: ee26ba30 TRAP: 0700 Not tainted (3.16.0-rc1) MSR: 00021002 <CE,ME> CR: 44022082 XER: 00000000 GPR00: c0288790 ee26bae0 eebda5d0 0000009f c1de3478 c1de382c 00000000 00021002 GPR08: 00000007 00000000 01660000 0000012f 82022082 00000000 c07a1900 eeda29c0 GPR16: 00000000 c61deea0 000c49a0 00000260 c07e1e10 c0da1180 00029002 c0d9ef08 GPR24: c07a0000 c07a4acc ee26bb38 ee2765c0 00000014 ee130210 00000000 00000014 NIP [c0288790] check_unmap+0x640/0xab0 LR [c0288790] check_unmap+0x640/0xab0 Call Trace: [ee26bae0] [c0288790] check_unmap+0x640/0xab0 (unreliable) [ee26bb30] [c0288c78] debug_dma_unmap_page+0x78/0x90 [ee26bbb0] [f929c3d4] ahash_setkey+0x374/0x720 [caamhash] [ee26bc30] [c022fec8] __test_hash+0x228/0x6c0 [ee26bde0] [c0230388] test_hash+0x28/0xb0 [ee26be00] [c0230458] alg_test_hash+0x48/0xc0 [ee26be20] [c022fa94] alg_test+0x114/0x2e0 [ee26bea0] [c022cd1c] cryptomgr_test+0x4c/0x60 [ee26beb0] [c00497a4] kthread+0xc4/0xe0 [ee26bf40] [c000f2fc] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 41de03e8 83da0020 3c60c06d 83fa0024 3863f520 813b0020 815b0024 80fa0018 811a001c 93c10008 93e1000c 4830cf6d <0fe00000> 3c60c06d 3863f0f4 4830cf5d ---[ end trace db1fae088c75c26c ]--- Mapped at: [<f929c15c>] ahash_setkey+0xfc/0x720 [caamhash] [<c022fec8>] __test_hash+0x228/0x6c0 [<c0230388>] test_hash+0x28/0xb0 [<c0230458>] alg_test_hash+0x48/0xc0 [<c022fa94>] alg_test+0x114/0x2e0 Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit e11aa9f1351f150ee9f0166bffc5e007c81c1364) Change-Id: I570eaf170295c91e2ce7f7367ed31c9fd5c9369d Reviewed-on: http://git.am.freescale.net:8181/17742 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: caam - fix "failed to check map error" DMA warningsHoria Geanta
Use dma_mapping_error for every dma_map_single / dma_map_page. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit ce572085282128d57324aabf415673dfbfa32d54) Conflicts: drivers/crypto/caam/caamalg.c Change-Id: I1e2466043f87dc74c955ebfae0aad45be7ac8de9 Reviewed-on: http://git.am.freescale.net:8181/17741 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: caam - fix typo in dma_mapping_errorHoria Geanta
dma_mapping_error checks for an incorrect DMA address: s/ctx->sh_desc_enc_dma/ctx->sh_desc_dec_dma Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit 71c65f7c90a176877ad1aa87b752217db61148a8) Change-Id: If55f0e154763c9a293adc6fbc44e9eb01e5fcbc5 Reviewed-on: http://git.am.freescale.net:8181/17740 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: caam - fix DECO RSR pollingHoria Geanta
RSR (Request Source Register) is not used when virtualization is disabled, thus don't poll for Valid bit. Besides this, if used, timeout has to be reinitialized. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit 8f1da7b945b65513fb02b75ce25040c67ce32726) Change-Id: I970dc02469553034efe2bcf7431d104b911a6c76 Reviewed-on: http://git.am.freescale.net:8181/17739 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11crypto: testmgr - avoid DMA mapping from text, rodata, stackHoria Geanta
With DMA_API_DEBUG set, following warnings are emitted (tested on CAAM accelerator): DMA-API: device driver maps memory from kernel text or rodata DMA-API: device driver maps memory from stack and the culprits are: -key in __test_aead and __test_hash -result in __test_hash MAX_KEYLEN is changed to accommodate maximum key length from existing test vectors in crypto/testmgr.h (131 bytes) and rounded. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit 29b77e5dd88e1b920e3e65681f0e7b961ebbdeb8) Change-Id: I14903ff5032e09754c0138dd2d3292cc3f83c28e Reviewed-on: http://git.am.freescale.net:8181/17738 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
generated by cgit v0.10.2 at 2024-07-18 11:55:46 (GMT)