summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-27t1023rdb/dts: disable nor flash as errata A-009138Shengzhou Liu
Due to IFC NOR errata A-009138, NOR is not available on T1023RDB RevB, so disable NOR access for revB. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I475ff8b863aebed8ca014753c6f42c8a116f907f Reviewed-on: http://git.am.freescale.net:8181/33340 Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-27net/phy: fix realtek compile issue on arm platformShengzhou Liu
include delay.h to fix compile issue on arm platform Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I1da95676894bbdb10d6173288a04cdcdb8f26642 Reviewed-on: http://git.am.freescale.net:8181/33659 Reviewed-by: Huan Wang <alison.wang@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-27fsl/mdio: fixup xgmac_mdio_read for rtl8211f on t1023rdbShengzhou Liu
Read RTL8211F PHY registers(e.g. PHY_ID, MII_STAT1000) will fail with xgmac_mdio_read on T1023RDB. so add the MDIO timing delay in xgmac_mdio_read to make it work stably with RTL8211F on T1023RDB. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: Ib85b1858d1cca310992b892dd1c86a129c36e7d2 Reviewed-on: http://git.am.freescale.net:8181/33272 Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-27capwap: set pool buffer size in PreHeaderPan Jiafei
Signed-off-by: Pan Jiafei <Jiafei.Pan@freescale.com> Change-Id: I52411e0d3cef00e5d8a3c7a45ec4fd9ac5907686 Reviewed-on: http://git.am.freescale.net:8181/33326 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-26mpc85xx: dts: Remove SPI and NAND partition from bsc9131rdb.dtsiAshish Kumar
* Run "mtdparts default" on u-boot to create dynamic partitions * Or use dynamic mtd partition with the help of bootargs in u-boot Append bootargs with: "mtdparts=ff800000.flash:1m(nand_uboot),512K(nand_dtb),8m(nand_kernel),-(fs);\ spiff707000.0:1m(spi_uboot),4m(spi_kernel),512k(spi_dtb),-(fs)'" Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com> Change-Id: Ifb91067016c6327e11271868cda04b369881c083 Reviewed-on: http://git.am.freescale.net:8181/33582 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-26qbman: Add Exception handling - static analysisAhmed Mansour
Catch exceptions and return from functions safely in qbman. Exception handling holes were found in static analysis review Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com> Change-Id: Ie1e2feadffd2c5c968164d0c569af147ab7929fb Reviewed-on: http://git.am.freescale.net:8181/25568 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-26t1024qds/dts: Added usdpaa shared interface device treeSandeep Singh
Signed-off-by: Sandeep Singh <sandeep@freescale.com> Change-Id: I30414c790280bed668b4a2e407a0917e5a95a7b9 Reviewed-on: http://git.am.freescale.net:8181/32930 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Vakul Garg <vakul@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-26t1024rdb/dts: Added usdpaa shared interface device treeSandeep Singh
Signed-off-by: Sandeep Singh <sandeep@freescale.com> Change-Id: I7dccc8996cf572f49353296287b4ae68d130f1c7 Reviewed-on: http://git.am.freescale.net:8181/32929 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Vakul Garg <vakul@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-26fmd: Add support for reading BMI counters from USMandy Lavi
Technical Details : Add support for the following BMI counters and make them available to the DPA stats interface in the User Space: e_FM_PORT_COUNTERS_DISCARD_FRAME, /* BMI stat counter */ e_FM_PORT_COUNTERS_RX_BAD_FRAME, /* BMI Rx stat counter */ e_FM_PORT_COUNTERS_RX_LARGE_FRAME, /* BMI Rx stat counter */ e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR, /* BMI Rx OP stat counter */ e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD, /* BMI Rx OP stat counter */ e_FM_PORT_COUNTERS_WRED_DISCARD, /* BMI OP stat counter */ @Function FM_PORT_GetBmiCounters @Description Read port's BMI stat counters and place them into a designated structure of counters. @Param[in] h_FmPort A handle to a FM Port module. @Param[out] p_BmiStats counters structure Change-Id: I464b5defc29e149252002c911b22e69343e61adf Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/32755 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-26arm: KVM: Don't return PSCI_INVAL if waitqueue is inactiveChristoffer Dall
The current KVM implementation of PSCI returns INVALID_PARAMETERS if the waitqueue for the corresponding CPU is not active. This does not seem correct, since KVM should not care what the specific thread is doing, for example, user space may not have called KVM_RUN on this VCPU yet or the thread may be busy looping to user space because it received a signal; this is really up to the user space implementation. Instead we should check specifically that the CPU is marked as being turned off, regardless of the VCPU thread state, and if it is, we shall simply clear the pause flag on the CPU and wake up the thread if it happens to be blocked for us. Further, the implementation seems to be racy when executing multiple VCPU threads. There really isn't a reasonable user space programming scheme to ensure all secondary CPUs have reached kvm_vcpu_first_run_init before turning on the boot CPU. Therefore, set the pause flag on the vcpu at VCPU init time (which can reasonably be expected to be completed for all CPUs by user space before running any VCPUs) and clear both this flag and the feature (in case the feature can somehow get set again in the future) and ping the waitqueue on turning on a VCPU using PSCI. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> (cherry picked from commit 478a8237f656d86d25b3e4e4bf3c48f590156294) Conflicts: arch/arm/kvm/psci.c Signed-off-by: Diana Craciun <Diana.Craciun@freescale.com> Change-Id: Ifdb4ff10bd3f02de20ee2302024a7dbedd1ddbf0 Reviewed-on: http://git.am.freescale.net:8181/31349 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mihai Caraman <mihai.caraman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25Revert "fmd: Add support for reading BMI counters from US"Honghua Yin
This reverts commit 1aa49383a4e16ce0c98c73cf81e1a9b2938e68fc. Change-Id: I67ab8f420b1d0777b8229dd91cba56b1bdc88d27 Reviewed-on: http://git.am.freescale.net:8181/33431 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25powerpc/defconfig: enable CONFIG_REALTEK_PHYShengzhou Liu
Enable CONFIG_REALTEK_PHY to support Realtek PHY RTL8211F which is used on freescale's T1023 RDB board. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I91d7b0e22a6223f5d8fd973bcdfe51e0b82958fa Reviewed-on: http://git.am.freescale.net:8181/33220 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25powerpc: pm: save/restore CR register when doing deep sleepChenhui Zhao
Save and restore CR (Condition Register) register when doing deep sleep. Otherwise, conditional statement will get wrong result after resuming from deep sleep. Free memory which is allocated in suspend code. Change-Id: Ibe50138e85c164d0218a01f0f481bf484a02a45a Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/33411 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhuoyu Zhang <Zhuoyu.Zhang@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25net/phy: update Realtek PHY driver to support RTL8211FShengzhou Liu
This patch updates Realtek PHY driver to add RTL8211F support. RTL8211F has different register definitions from RTL8211E. Tested with RTL8211F(RGMII, SGMII) on Freescale T1023RDB board. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I5251bf757888e8cbef5cf3c6f851f68824e2cd8e Reviewed-on: http://git.am.freescale.net:8181/33250 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25capwap: sync with new config flavor for FManV3Pan Jiafei
CONFIG_FMAN_T4240 was eliminated. Instead, there are now two flags representing FmanV3: CONFIG_FMAN_V3H for FmanV3H arch and CONFIG_FMAN_V3L for FmanV3L arch Signed-off-by: Pan Jiafei <Jiafei.Pan@freescale.com> Change-Id: Ia0de7b70a0c110e379edb38ee61779e7560979a7 Reviewed-on: http://git.am.freescale.net:8181/33329 Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25capwap: fix compile warningPan Jiafei
Signed-off-by: Pan Jiafei <Jiafei.Pan@freescale.com> Change-Id: I4110d5a606dd4d1e266fdb28d3ead1ba84382c22 Reviewed-on: http://git.am.freescale.net:8181/33328 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25fmd: Add support for reading BMI counters from USMandy Lavi
Technical Details : Add support for the following BMI counters and make them available to the DPA stats interface in the User Space: e_FM_PORT_COUNTERS_DISCARD_FRAME, /* BMI stat counter */ e_FM_PORT_COUNTERS_RX_BAD_FRAME, /* BMI Rx stat counter */ e_FM_PORT_COUNTERS_RX_LARGE_FRAME, /* BMI Rx stat counter */ e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR, /* BMI Rx OP stat counter */ e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD, /* BMI Rx OP stat counter */ e_FM_PORT_COUNTERS_WRED_DISCARD, /* BMI OP stat counter */ @Function FM_PORT_GetBmiCounters @Description Read port's BMI stat counters and place them into a designated structure of counters. @Param[in] h_FmPort A handle to a FM Port module. @Param[out] p_BmiStats counters structure Change-Id: I464b5defc29e149252002c911b22e69343e61adf Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/32755 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25fmd: add macsec wrapper layer interfaceMandy Lavi
Change-Id: I1498478e96ac52523283e41fd047b1162dad11ba Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/33210 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Camelia Alexandra Groza <camelia.groza@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25fmd: Base cascading decision on current reparsing optionMandy Lavi
fm_manip.c - Base cascading decision on current reparsing option rather than the next one Change-Id: Ic24a9c4c441337548d8f5a1c6a09d5409276e37a Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/30768 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Eyal Harari <Eyal.Harari@freescale.com> Reviewed-by: Nir Erez <nir.erez@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/33215
2015-03-25powerpc/fsl-booke: Add T1040D4RDB/T1042D4RDB board supportPriyanka Jain
T1040D4RDB/T1042D4RDB are Freescale Reference Design Board which can support T1040/T1042 QorIQ Power Architecture™ processor respectively T1040D4RDB/T1042D4RDB board Overview ------------------------------------- - SERDES Connections, 8 lanes supporting: - PCI - SGMII - SATA 2.0 - QSGMII(only for T1040D4RDB) - DDR Controller - Supports rates of up to 1600 MHz data-rate - Supports one DDR4 UDIMM -IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V@1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Devices connected: EEPROM, thermal monitor, VID controller - Other IO - Two Serial ports - ProfiBus port Add support for T1040/T1042D4RDB board: -add device tree -Add entry corenet_generic.c, as it is similar to other corenet platforms Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Change-Id: I4ff308a7884107dec88fac26e91feb3e85065d3f Reviewed-on: http://git.am.freescale.net:8181/33157 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-24Merge remote-tracking branch 'dpaa/dpaa-next'Olivia Yin-R63875
2015-03-24dpa_eth_sg: Patch to not allow Jumbo packet to ASF when flag is disabled.Alok Makhariya
This patch checks fd->length20 therefore not allowing jumbo packet to ASF when JUMBO flag is not enabled. Signed-off-by: Alok Makhariya <B46187@freescale.com> Change-Id: Id6a111b823acd3a4b3152f5044262abfb3ca1f06 Reviewed-on: http://git.am.freescale.net:8181/27894 Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Sandeep Malik <Sandeep.Malik@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23dpaa_eth: Fix Shared-MAC and MACless compilation issueCristian Sovaiala
Signed-off-by: Cristian Sovaiala <cristian.sovaiala@freescale.com> Change-Id: Icdfb39e75fd1c7268b26209f1bcd9b0755e6192f Reviewed-on: http://git.am.freescale.net:8181/33299 Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Tested-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com>
2015-03-23fmd: set sgmii_speed if disabled auto-neg for 2.5g sgmiiShengzhou Liu
When disabled auto-neg for 2.5 sgmii, it needs to set MDIO_SGMII_IF_MODE[SGMII_SPEED] to '10'(for gigabit) for 2.5G operation, otherwise large packet loss issue occured. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I21ddecd01aaf1eced8d62a40b737218cf47ca6b4 Reviewed-on: http://git.am.freescale.net:8181/32697 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23powerpc/t1023rdb: Add T1023RDB board supportShengzhou Liu
T1023RDB is a Freescale Reference Design Board that hosts T1023 SoC. This patch addes support for t1023rdb. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I58c350794d657c653ff0b37bfede1179a7b39370 Reviewed-on: http://git.am.freescale.net:8181/32940 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23t102x/diu: move display alias to t1024si-post.dtsiShengzhou Liu
As DIU/display feature exists on t1024 instead of t1023, so move display alias to t1024si-post.dtsi. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I831f211f8f85142622e63706204df2265f80ed0d Reviewed-on: http://git.am.freescale.net:8181/32939 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23fsl/dpa: fixup to support 2.5G SGMIIShengzhou Liu
- correct the location of disabling auto-neg for 2.5G in SetupSgmiiInternalPhy. - add the missing condition e_ENET_MODE_SGMII_2500 in memac_init_phy. - fix sgmii_2500 to sgmii-2500 to match u-boot. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I3e3481f1a22e0931acaaaf739dccce944e91e76c Reviewed-on: http://git.am.freescale.net:8181/25752 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23t1024rdb/dts: add support for 2.5G SGMIIShengzhou Liu
Add 2.5G SGMII support for T1024RDB Rev-B. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I5e278f2dacde8c27b42c6486808366f8009186a2 Reviewed-on: http://git.am.freescale.net:8181/26736 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23fmd: memac: distinguish TX_FIFO_SECTIONS for t1024Mandy Lavi
t1024 requires for its 10g "best effort" port a different value for TX_FIFO_SECTIONS[TX_AVAIL] than other 10g ports in other devices: 0x60 instead of 0x19 Change-Id: I06fa4166fdff7ef39c02ebe4d97807230ae01f3d Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/31540 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23fmd: create new config flavor for FManV3LMandy Lavi
CONFIG_FMAN_T4240 was eliminated Instead, there are now two flags representing FmanV3: CONFIG_FMAN_V3H for FmanV3H arch and CONFIG_FMAN_V3L for FmanV3L arch. FmanV3H h/w block is integrated in B4860, B4420, T4240, T4160, T2080 etc FmanV3L h/w block is integrated in T1040, T1024, T1020, T1022 etc defconfig files changes: corenet64_fmanv3_smp_defconfig -> corenet64_fmanv3l_smp_defconfig corenet32_fmanv3_smp_defconfig -> corenet32_fmanv3l_smp_defconfig 85xx/e6500rev2_defconfig -> corenet64_fmanv3h_smp_defconfig Change-Id: I9fcfb454bc3bd2d72c5d55c616400a808e181413 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/30539 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23dpaa_eth: fix compile error when selecting 1588 configYangbo Lu
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Change-Id: I56995d4297e8b1001dc8089ae650604dea311428 Reviewed-on: http://git.am.freescale.net:8181/32977 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23dpa_offload: Fix statistics info for multipolicy IPSec outbound SAsMarian Chereji
The dpa_ipsec driver was only providing statistics for the first policy of the outbound SAs. It is now correctly suming up the statistics for all the outbound SA's policies. Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/28731 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Bogdan Constantin Popescu <bogdan.c.popescu@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Change-Id: Ide98e16c6a6c684b6d51fa190388c7a95b1a8490 Reviewed-on: http://git.am.freescale.net:8181/33188
2015-03-20powerpc: Make boot_cpuid common between 32 and 64-bitBenjamin Herrenschmidt
Move the definition to setup-common.c and set the init value to -1 on both 32 and 64-bit (it was 0 on 64-bit). Additionally add a check to prom.c to garantee that the init value has been udpated after the DT scan. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Change-Id: I3aa6499dd65bfa5410d382880ca42f259906cdea Reviewed-on: http://git.am.freescale.net:8181/33084 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-20powerpc/mpc85xx: Add ranges to etsec2 nodesScott Wood
Commit 746c9e9f92dd "of/base: Fix PowerPC address parsing hack" limited the applicability of the workaround whereby a missing ranges is treated as an empty ranges. This workaround was hiding a bug in the etsec2 device tree nodes, which have children with reg, but did not have ranges. Signed-off-by: Scott Wood <scottwood@freescale.com> Reported-by: Alexander Graf <agraf@suse.de> Change-Id: I4c77ddeeb3c8de2ae180d8a24aae9871f2988fa6 Reviewed-on: http://git.am.freescale.net:8181/33083 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-20fsl/fman: Use ccflags-y instead of deprecated EXTRA_CFLAGSWang Dongsheng
This allows users to pass in additional compiler flags through the environment variable EXTRA_CFLAGS, e.g. make EXTRA_CFLAGS=-Wno-error Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> CC: Mandy Lavi <mandy.lavi@freescale.com> Change-Id: I73b952f3c3862e6bd96f6b90df110f8f195721d9 Reviewed-on: http://git.am.freescale.net:8181/33154 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-20Merge remote-tracking branch 'ls1-linux/LS1-SDK'Olivia Yin-R63875
2015-03-20fsl: Use ccflags-y instead of deprecated EXTRA_CFLAGSWang Dongsheng
This allows users to pass in additional compiler flags through the environment variable EXTRA_CFLAGS, e.g. make EXTRA_CFLAGS=-Wno-error Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Change-Id: I36513506ee1671c31bb076e9b73c2e8e2442cf4f Reviewed-on: http://git.am.freescale.net:8181/33146 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-20fmd: update FmanV3L constantsMandy Lavi
Change-Id: I8b2b5e146358ab5aa9ce995c458471b4d037310b Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/29110 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jianhua Xie <jianhua.xie@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-20powerpc/e6500: Optimize hugepage TLB missesScott Wood
Some workloads take a lot of TLB misses despite using traditional hugepages. Handle these TLB misses in the asm fastpath rather than going through a bunch of C code. Signed-off-by: Scott Wood <scottwood@freescale.com> Change-Id: I84a1f6fad189130c32a44e73ff60a26ffadfd59b Reviewed-on: http://git.am.freescale.net:8181/32729 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-20fmd: fix reading fm_port_ipv4_opt to not panicMandy Lavi
Change-Id: Id4166dad03d6e51202caa367de188ff8486fa9dc Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/28750 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-19dpaa_eth: remove unused argumentMadalin Bucur
Removed unnecessary argument to dpa_bp_free(). Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: Ib16b37b0057857875805eb5692e1fd5a273883cb Reviewed-on: http://git.am.freescale.net:8181/32981 Reviewed-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com> Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2015-03-19Merge branch 'qoriq-sdk' into LS1-SDKJason Jin
2015-03-19clock: hrtimer: Add workaround to fix building error about hrtimer based ↵Alison Wang
broadcast on PowerPC The hrtimer broad support was back-ported from upstream for LS1, the Power platform do not implement this yet. The tick_setup_hrtimer_broadcast function was not defined on Power platform. When build for PowerPC with this backport support, such error occurs: In file included from include/linux/tick.h:9:0, from arch/powerpc/kernel/idle.c:27: include/linux/clockchips.h:193:13: error: 'tick_setup_hrtimer_broadcast' defined but not used [-Werror=unused-function] As hrtimer based broadcast was only backported for ARM, this patch try to provide a workaround to fix the build error on Power platform. In linux-next, PowerPC will support hrtimer based broadcast too. There will be no build error and no workaround needed. Signed-off-by: Alison Wang <alison.wang@freescale.com> Change-Id: If0f61062d6aa3d91ff81d074f20765a5880a5168 Reviewed-on: http://git.am.freescale.net:8181/33071 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-03-18dpaa_eth: use proper recycling conditionMadalin Bucur
The condition that needs to be evaluated to determine if a certain fd is to be recycled (buffers released in the buffer pool by HW) is (fd.bpid != 0xff). Several places in the code were using the previous condition (fd.cmd & FM_FD_CMD_FCO) that is always true after the unification of the recycling and confirmation paths. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Change-Id: I23789acc6879086f356ca9accfe400122fd4f0f3 Reviewed-on: http://git.am.freescale.net:8181/32879 Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
2015-03-17fmd: MACSEC integrationMandy Lavi
This is the MACSEC lower API integration. Change-Id: I3b6f172b323f1e297d6202856524ac059b7745c1 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/19442 Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Tested-by: Mandy Lavi <Mandy.Lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/28484 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-17fmd: disable auto-neg if ports is SGMII2.5GMandy Lavi
In order to do so it was also required to introduce a new if type for SGMII2.5G Change-Id: Iddbe223d8b716c3ed348c7a8a53bee0c037f04f4 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/23474 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-17fmd: Render match table key statistics accessible from user spaceMarian Chereji
The key statistics for match tables are not accessible from user space using fmlib. This update implements the support for the function FM_PCD_MatchTableGetKeyStatistics to be accessible from user space. Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Change-Id: Ibcf40fdcf7a60afc65b2f926c2a1474513ae8950 Reviewed-on: http://git.am.freescale.net:8181/25376 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-17gianfar: Reduce logging noise seen due to phy polling if link is downGuenter Roeck
Commit 6ce29b0e2a04 ("gianfar: Avoid unnecessary reg accesses in adjust_link()") eliminates unnecessary calls to adjust_link for phy devices which don't support interrupts and need polling. As part of that work, the 'new_state' local flag, which was used to reduce logging noise on the console, was eliminated. Unfortunately, that means that a 'Link is Down' log message will now be issued continuously if a link is configured as UP, the link state is down, and the associated phy requires polling. This occurs because priv->oldduplex is -1 in this case, which always differs from phydev->duplex. In addition, phydev->speed may also differ from priv->oldspeed. gfar_update_link_state() is therefore called each time a phy is polled, even if the link state did not change. Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> Change-Id: Iab3e64c4c5828133ff0e1441a087e55c5287408f Reviewed-on: http://git.am.freescale.net:8181/32703 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-17gianfar: correct the bad expression while writing bit-patternSanjeev Sharma
This patch correct the bad expression while writing the bit-pattern from software's buffer to hardware registers. Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net> Change-Id: I3cdc480f17d1c18f47c5dbea47b843c76c9669a2 Reviewed-on: http://git.am.freescale.net:8181/32702 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-17net: gianfar: remove the unneeded check of disabled deviceKevin Hao
Since commit cd1e65044d44 ("of/device: Don't register disabled devices"), the disabled device will not be registered at all. So we don't need to do the check again in the platform device driver. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Change-Id: I3a851a9b6eb649a1fa9694970c6aa34d11f76fda Reviewed-on: http://git.am.freescale.net:8181/32701 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
generated by cgit v0.10.2 at 2024-11-15 20:27:49 (GMT)