summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-12net: Remove checks for dst_ops->redirect being NULL.David S. Miller
No longer necessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12net: Add dummy dst_ops->redirect method where needed.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().David S. Miller
And delete rt6_redirect(), since it is no longer used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv6: Add redirect support to all protocol icmp error handlers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv6: Add ip6_redirect() and ip6_sk_redirect() helper functions.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv6: Pull main logic of rt6_redirect() into rt6_do_redirect().David S. Miller
Hook it into dst_ops->redirect as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv6: Move bulk of redirect handling into rt6_redirect().David S. Miller
This sets things up so that we can have the protocol error handlers call down into the ipv6 route code for redirects just as ipv4 already does. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv6: Export ndisc option parsing from ndisc.cDavid S. Miller
This is going to be used internally by the rt6 redirect code. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv4: Kill ip_rt_redirect().David S. Miller
No longer needed, as the protocol handlers now all properly propagate the redirect back into the routing code. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv4: Add redirect support to all protocol icmp error handlers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv4: Add ipv4_redirect() and ipv4_sk_redirect() helper functions.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv4: Generalize ip_do_redirect() and hook into new dst_ops->redirect.David S. Miller
All of the redirect acceptance policy is now contained within. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv4: Rearrange arguments to ip_rt_redirect()David S. Miller
Pass in the SKB rather than just the IP addresses, so that policy and other aspects can reside in ip_rt_redirect() rather then icmp_redirect(). Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv4: Pull redirect instantiation out into a helper function.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv4: Deliver ICMP redirects to sockets too.David S. Miller
And thus, we can remove the ping_err() hack. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12ipv4: Pull icmp socket delivery out into a helper function.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12tcp: TCP Small QueuesEric Dumazet
This introduce TSQ (TCP Small Queues) TSQ goal is to reduce number of TCP packets in xmit queues (qdisc & device queues), to reduce RTT and cwnd bias, part of the bufferbloat problem. sk->sk_wmem_alloc not allowed to grow above a given limit, allowing no more than ~128KB [1] per tcp socket in qdisc/dev layers at a given time. TSO packets are sized/capped to half the limit, so that we have two TSO packets in flight, allowing better bandwidth use. As a side effect, setting the limit to 40000 automatically reduces the standard gso max limit (65536) to 40000/2 : It can help to reduce latencies of high prio packets, having smaller TSO packets. This means we divert sock_wfree() to a tcp_wfree() handler, to queue/send following frames when skb_orphan() [2] is called for the already queued skbs. Results on my dev machines (tg3/ixgbe nics) are really impressive, using standard pfifo_fast, and with or without TSO/GSO. Without reduction of nominal bandwidth, we have reduction of buffering per bulk sender : < 1ms on Gbit (instead of 50ms with TSO) < 8ms on 100Mbit (instead of 132 ms) I no longer have 4 MBytes backlogged in qdisc by a single netperf session, and both side socket autotuning no longer use 4 Mbytes. As skb destructor cannot restart xmit itself ( as qdisc lock might be taken at this point ), we delegate the work to a tasklet. We use one tasklest per cpu for performance reasons. If tasklet finds a socket owned by the user, it sets TSQ_OWNED flag. This flag is tested in a new protocol method called from release_sock(), to eventually send new segments. [1] New /proc/sys/net/ipv4/tcp_limit_output_bytes tunable [2] skb_orphan() is usually called at TX completion time, but some drivers call it in their start_xmit() handler. These drivers should at least use BQL, or else a single TCP session can still fill the whole NIC TX ring, since TSQ will have no effect. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dave Taht <dave.taht@bufferbloat.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12tcp: Fix out of bounds access to tcpm_valsAlexander Duyck
The recent patch "tcp: Maintain dynamic metrics in local cache." introduced an out of bounds access due to what appears to be a typo. I believe this change should resolve the issue by replacing the access to RTAX_CWND with TCP_METRIC_CWND. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11ath5k: replace modparam_all_channels with CONFIG_ATH5K_TEST_CHANNELSLuis R. Rodriguez
This stashes away this feature from standard kernel builds. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11iwmc3200top: remove driver for unavailable hardwareJohn W. Linville
This hardware never became available to normal humans. Leaving this driver imposes unwelcome maintenance costs for no clear benefit. Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11i2400m: remove SDIO device supportJohn W. Linville
SDIO support in this driver was intended to support the iwmc3200 device. This hardware never became available to normal humans. Leaving this driver imposes unwelcome maintenance costs for no clear benefit. Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
2012-07-11bcma: add PMU clock support for BCM4706Hauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11bcma: fix CC driver compilation on MIPSRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11rt2x00: remove unused argumentStanislaw Gruszka
Data pointer on rt2x00queue_for_each_entry() is never used - remove it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11rt2800lib: merge same definesStanislaw Gruszka
Merge 3290 and 5390 POWER_BOUND and FREQ_OFFSET_BOUND defines. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11rt2x00pci: small 3290 changes cleanupStanislaw Gruszka
Fix indention and remove unnecessary brackets and compares. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11carl9170: fix HT peer BA session corruptionChristian Lamparter
This patch adds an alternative tx status path for BlockAck Requests as the hardware doesn't recognize that a BlockAck Requests is usually acked with a BlockAck and not a legacy ACK. Without this patch, the stack would constantly resent old and stale BARs. So, depending on the receiver stack, this could lead to: - "stuck" ba sessions and package loss, as the stale BAR would reset the sequence each time. - lots of reorder releases. - ... Reported-by: Sean Patrick Santos <quantheory@gmail.com> Reported-by: Mikołaj Kuligowski <mikolaj.q@wp.pl> Reported-by: Per-Erik Westerberg <per-erik.westerberg@bredband.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11carl9170: import 1.9.6 firmware headersChristian Lamparter
Import new headers from my firmware branch: <https://github.com/chunkeey/carl9170fw> visit our wiki at: <http://wireless.kernel.org/en/users/Drivers/carl9170.fw> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11ipv6: Move ipv6 twsk accessors outside of CONFIG_IPV6 ifdefs.David S. Miller
Fixes build when ipv6 is disabled. Reported-by: Fengguang Wu <wfg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11ixgbe: Merge RSS and flow director ring register caching and configurationAlexander Duyck
There are really only 3 modes that can control the number of queues. Those are RSS, DCB, and VMDq/SR-IOV. Currently we have things much more broken up than they need to be for how we are configuring the rings. In order to try and straiten some of this out I am going to start merging similar functionality into single functions. To start with I am merging the Flow Director ring configuration into the RSS ring configuration since Flow Director cannot function with DCB or SR-IOV. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-11ixgbe: Clean up a useless switch statement and dead code in configure_srrctlAlexander Duyck
This patch replaces a switch statement for an 82598 workaround with an if statement that only applies to 82598. In addition I am pulling out several dead pieces of code and instead of reading the SRRCTL register and then modifying it we are just writing a value which we generate from scratch. Finally I am also removing any drop enable related code since that was moved to a function of its own. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-11ixgbe: Add feature offset value to ring featuresAlexander Duyck
The mask value for ring features was overloaded for FCoE which can lead to some confusion. In order to avoid any confusion I am splitting the mask value and adding an offset value. This can be used for the start of the FCoE rings, and in the future I hope to use it to store the start of the registers for SR-IOV. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-11ixgbe: Add upper limit to ring featuresAlexander Duyck
We are currently using indices to indicate the upper limit on a ring feature. However since we can switch back and forth on features such as DCB and that has effects on other features such as RSS it is preferable to instead store the upper limit separate from the current value for the number of rings related to the feature. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-11ixgbe: count q_vectors instead of MSI-X vectorsAlexander Duyck
It makes much more sense for us to count q_vectors instead of MSI-X vectors. We were using num_msix_vectors to find the number of q_vectors in multiple places. This was wasteful since we only had one place that actually needs the number of MSI-X vectors and that is in slow path. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-11bridge: fix endianLi RongQing
mld->mld_maxdelay is net endian, so we should use ntohs, not htons CC: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11qlge: fix endian issueLi RongQing
commit 6d29b1ef introduces a bug, ntohs is __be16_to_cpu, not cpu_to_be16. We always use htons on IP_OFFSET and IP_MF, then compare with network package. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11ksz884x: fix EndianLi RongQing
ETH_P_IP is host Endian, skb->protocol is big Endian, when compare them, Using htons on skb->protocol is wrong. And fix two code style issues: indentation and remove unnecessary parentheses. CC: Tristram Ha <Tristram.Ha@micrel.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Joe Perches <joe@perches.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11Merge branch 'davem-next.r8169' of git://violet.fr.zoreil.com/romieu/linuxDavid S. Miller
2012-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/batman-adv/bridge_loop_avoidance.c net/batman-adv/bridge_loop_avoidance.h net/batman-adv/soft-interface.c net/mac80211/mlme.c With merge help from Antonio Quartulli (batman-adv) and Stephen Rothwell (drivers/net/usb/qmi_wwan.c). The net/mac80211/mlme.c conflict seemed easy enough, accounting for a conversion to some new tracing macros. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11bnx2: Fix bug in bnx2_free_tx_skbs().Michael Chan
In rare cases, bnx2x_free_tx_skbs() can unmap the wrong DMA address when it gets to the last entry of the tx ring. We were not using the proper macro to skip the last entry when advancing the tx index. Reported-by: Zongyun Lai <zlai@vmware.com> Reviewed-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11IPoIB: fix skb truesize underestimatiomEric Dumazet
Or Gerlitz reported triggering of WARN_ON_ONCE(delta < len); in skb_try_coalesce() This warning tracks drivers that incorrectly set skb->truesize IPoIB indeed allocates a full page to store a fragment, but only accounts in skb->truesize the used part of the page (frame length) This patch fixes skb truesize underestimation, and also fixes a performance issue, because RX skbs have not enough tailroom to allow IP and TCP stacks to pull their header in skb linear part without an expensive call to pskb_expand_head() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Shlomo Pongartz <shlomop@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11net: Fix memory leak - vlan_info structAmir Hanania
In driver reload test there is a memory leak. The structure vlan_info was not freed when the driver was removed. It was not released since the nr_vids var is one after last vlan was removed. The nr_vids is one, since vlan zero is added to the interface when the interface is being set, but the vlan zero is not deleted at unregister. Fix - delete vlan zero when we unregister the device. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Included changes: - fix a bug generated by the wrong interaction between the GW feature and the Bridge Loop Avoidance
2012-07-11qlge: Bumped driver version to 1.00.00.31Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11qlge: Refactoring of ethtool stats.Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11qlge: Moving low level frame error to ethtool statistics.Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11qlge: Fixed double pci free upon tx_ring->q allocation failure.Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11qlge: Added missing case statement to ethtool get_strings.Jitendra Kalsaria
Missing case was causing ethtool self test to print garbage value in extra info section. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11qlge: Clean up ethtool set WOL routine.Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11qlge: Fix ethtool WOL calls to operate only on devices that support WOL.Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-10-03 16:33:20 (GMT)