Age | Commit message (Collapse) | Author |
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Change-Id: Iaaf60a7e20a7cd96698fbcb3f98b5918000872e1
Reviewed-on: http://git.am.freescale.net:8181/36225
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
IFC NAND chip select is wrongly mapped to 2 in reg
property of NAND node.Due to this kernel is not able
probe NAND flash.Set chip select to 1 in reg property
Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Change-Id: I44c020f964c3960ec0208ba6b594f69dd5019e9d
Reviewed-on: http://git.am.freescale.net:8181/36183
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Tested with tcrypt on p1023rdb platform.
Change-Id: Ic19a8d2ed5ce3603d2d9f893736b68eea03d480b
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36220
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
We missed to handle PME and message interrupt when system back from
sleep, so system will popup "nobody cared" call trace.
Add .pcibios_fixup_phb for BSC9132 platform, PME interrupt handler
will be registered in fsl_pcibios_fixup_phb.
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Change-Id: I0550322707a7a48116761f2d691304aec217e4a2
Reviewed-on: http://git.am.freescale.net:8181/36664
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: Chenhui Zhao <chenhui.zhao@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Make sure the SPI Flash into reset state.
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Change-Id: I627606256571b80ba80a5a84a25b52685e799b0c
Reviewed-on: http://git.am.freescale.net:8181/36725
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Change-Id: I1ec25215b53c3edd542c2afb5d6cc820ef2de041
Reviewed-on: http://git.am.freescale.net:8181/36724
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
slab_scr_128b should be checked for NULL.
Signed-off-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com>
Change-Id: I51f5b7c96fbee9a0f1baf2340ff97b23caed434e
Reviewed-on: http://git.am.freescale.net:8181/36649
Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com>
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
bufs passed as NULL and dereferenced. Replaced with local variable.
Signed-off-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com>
Change-Id: I39aecee95b086567a21487ee2b751126aa0777f1
Reviewed-on: http://git.am.freescale.net:8181/36648
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
is_power_of_2 is a Linux function that takes unsigned long. it was
used by our new function is_power_of_4 which takes u64. Trucation
is possible because unsigned long is 32 bits wide in 32 bit
applications. This patch removes the dependancy on is_power_of_2 to
solve this issue
Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com>
Change-Id: I5939e7e6457e07e9355ba54fef80a7bc71c3a64b
Reviewed-on: http://git.am.freescale.net:8181/36609
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Add BUG_ON to prevent NULL dereference if ctx->flags indicate flow
mode (none direct mode) then a call back token must be specified
otherwise the call back token can be passed NULL
Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com>
Change-Id: I20f95b2fd77699eb32ef54515666127ebc6b1743
Reviewed-on: http://git.am.freescale.net:8181/36607
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com>
Reviewed-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Add support for INA220 current sense.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Change-Id: I08f12b33f73528abc681bfa34027b28eea9dc45b
Reviewed-on: http://git.am.freescale.net:8181/36539
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Xiaobo Xie <X.Xie@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Add support for INA220 current sense.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Change-Id: I8a09e9a41219ce5d31bf8744be1552927cd0b302
Reviewed-on: http://git.am.freescale.net:8181/36538
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Xiaobo Xie <X.Xie@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
The problem will occur only in T1040R1. A workaround
has been verified; set a Scatter Gather (SG) flag
on the Q or G Pointers on KPG, which will give
the PKHA unload time to complete. It's sufficient
to have the SG flag set for only one of these.
Change-Id: I5a403576c6e995110227872c84de7e74da0144c5
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36617
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Corrections to struct qm_mcr_ceetm_ccgr_query to match block guide
Corrections to qman_ceetm_cscn_dcp_get() bit manipulation to match
bit order in block guide
Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com>
Change-Id: I78d730263495358c29be766933aceae9d5b36326
Reviewed-on: http://git.am.freescale.net:8181/36407
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: Id5ecb2f85caea934dc3de2b69e538af45316e14f
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36567
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Eyal Harari <Eyal.Harari@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
In order to process TLS data that is received in
network byte order, a swap is needed for a SEC
block working in little endian mode. This is done
by using the MOVEB command.
Change-Id: I8290ad7348d9e66169c05eff8bda71e587beb0a9
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36369
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
CHAs of SEC work natively in BE mode. When moving
data to the alignment blocks, swapping is needed
for LE platforms. This is done by means of the MOVEB
command (introduced in ERA 7). This patch adds support
to DCL for this command.
Change-Id: Ie74f2d8a1cf101acd5a23686ff8eb835d1a1f047
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36365
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com>
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Tested with tcrypt on bsc9132qds platform.
Change-Id: Ia8a58b786779e00b267ad3cd2fa05b30d5e17bfb
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36219
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
An implicit truncation is done when using a variable of 64 bits
in MATH command:
warning: large integer implicitly truncated to unsigned type [-Woverflow]
Silence the compiler by feeding it with an explicit truncated value.
Change-Id: I95e3f397f62f9b850c0c7f26e7079b9d9688b87e
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36218
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: Ib662fba72d3ad0e5260bcc36006fa0dd7158b056
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36405
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Nir Erez <nir.erez@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Current in-kernel MPIC emulation for PowerPC is unsuitable for RT. More
specifically, the MPIC lock becomes a sleeping mutex, causing concurrency issues
on a KVM guest enter. Converting the lock to a raw_spinlock is still not a
viable solution, since the current implementation is prone to induce large
latencies with preemption and irqs disabled on the host kernel.
Patch aready applied in the upstream 3.18.13 RT patch, version 9 [1].
[1] http://www.spinics.net/lists/linux-rt-users/msg13340.html
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Change-Id: Ie942de00717527ea78c2471f6a5153489f432e89
Reviewed-on: http://git.am.freescale.net:8181/36530
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
The function "dpa_ipsec_free" is calling "free_resources" which
is releasing the dpa_ipsec instance by executing
kfree(dpa_ipsec);
Once this call ends, "dpa_ipsec_free" is accessing again the
"instance" pointer to call "mark_unused_gbl_dpa_ipsec". The problem
is that the "instance" pointer is inconsistent at his point (was
released by the call to "free_resources").
To fix this, the call to "mark_unused_gbl_dpa_ipsec" was simply
removed from "dpa_ipsec_free" because the function "free_resources"
is already doing that.
Signed-off-by: Marian Chereji <marian.chereji@freescale.com>
Change-Id: Ibabc69253a8a21c7bb158bc371193a6b9ace01ac
Reviewed-on: http://git.am.freescale.net:8181/36404
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Pinghua An <pinghua.an@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Signed-off-by: Pan Jiafei <Jiafei.Pan@freescale.com>
Change-Id: If3f1264a02dbc9241b10e6050ff0c55c17170ab1
Reviewed-on: http://git.am.freescale.net:8181/35983
Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: I0e1cbb1d09eef65fedf75d7c3787898fc5b67f50
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36121
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
-change req_ctx->nbuf from u64 to unsigned int to silence checker
warnings; this is safe since nbuf value is <= HASH_MAX_BLOCK_SIZE
-remove unused value read from TALITOS_CCPSR; there is no requirement
to read upper 32b before reading lower 32b of a 64b register;
SEC RM mentions: "reads can always be done by byte, word, or dword"
-remove unused return value of sg_to_link_tbl()
-change "len" parameter of map_single_talitos_ptr();
cpu_to_be16 will __force downcast the value to unsigned short
without any checker warning
Change-Id: I2245e6a7f5e7d60d3a86b3b68a76a104ba372530
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36124
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
This reverts commit 7291a932c6e27d9768e374e9d648086636daf61c.
The conversion to be16_add_cpu() is incorrect in case cryptlen is
negative due to premature (i.e. before addition / subtraction)
implicit conversion of cryptlen (int -> u16) leading to sign loss.
Change-Id: Iee27eb0881df6f1134f977cbe471cd23479752ce
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36123
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Check return value of scatterlist_sg_next(), i.e. don't rely solely
on number of bytes to be processed or number of scatterlist entries.
Change-Id: I6c10ed15e9a456b87828ebb21cc1121c7041be7d
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36122
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
The bug in xgmac_mdio_read have been fixed, so remove
the temporary workaround which is no longer needed.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Change-Id: I7d932208ff81bd00f6c761b57c5b1dacf456e48b
Reviewed-on: http://git.am.freescale.net:8181/35748
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Xiaobo Xie <X.Xie@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
The ONIC interface only works when the offline port OH2 is using
buffer pool #17 which was prepared for it. This prevents the
unification of the DTS example files for the "ipsec_offload" and
"dpa_offload" demo applications, because the NF offloading demo
application requests the buffer pool #16 on the OH2 offline port
as NF IP Forwarding does not support VSPs.
Signed-off-by: Marian Chereji <marian.chereji@freescale.com>
Change-Id: I3e2996f6777e4b16aee1a3cf489f89b60a37f325
Reviewed-on: http://git.am.freescale.net:8181/36070
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Nicolae-Sebastian Grigore <sebastian.grigore@freescale.com>
Reviewed-by: Pinghua An <pinghua.an@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Compile out USB clk functions for PPC platforms as there is no usb clk
specific initialization on any of these platforms
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Change-Id: I766a30c6584b56d7105f7c080440ba5acb3f62a8
Reviewed-on: http://git.am.freescale.net:8181/36197
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Endpoint name being statically defined cannot be NULL
hence checking name's first two character with "ep" for
endpoint validity
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Change-Id: I1fc6b71fce4807fdc18a96db0182c15dd9e3c649
Reviewed-on: http://git.am.freescale.net:8181/36196
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Remove unused variable td_complete
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Change-Id: I5e16b5ff77577db19ddd5f231603aba78bbaaa6d
Reviewed-on: http://git.am.freescale.net:8181/36195
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Check memory resource existence before releasing it to avoid NULL
pointer dereference
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Change-Id: I1f34b13e1669a3271250205c788e74b3228477e8
Reviewed-on: http://git.am.freescale.net:8181/36193
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Enable CONFIG_MTD_SPI_NOR_BASE for corenet64_smp_defconfig. Verified on
P5040DS.
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Change-Id: I534c2bf9d18ef330d14c4d7ed79dcfeb5185d562
Reviewed-on: http://git.am.freescale.net:8181/35462
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: Ibb15bb7b55678030e577c7ec6e0f0980b49e985b
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36009
Reviewed-by: Eyal Harari <Eyal.Harari@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: I408d577d952f3ce9237dce1105ef1e577ad2cc6b
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/35819
Reviewed-by: Eyal Harari <Eyal.Harari@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
This patch fixes the module unload for onic in the context of creating the DPAA
Ethernet drivers as dynamic kernel modules that can be loaded/unloaded at
runtime.
Change-Id: Ib813d4c99869a09875a3dc9d07f6fcb9b5bb65e2
Signed-off-by: Marian-Cristian Rotariu <marian.rotariu@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/35781
Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
|
|
Signed-off-by: Marian-Cristian Rotariu <marian.rotariu@freescale.com>
Change-Id: I2023fbdc7419aecdef5386933e86083daeb40d91
Reviewed-on: http://git.am.freescale.net:8181/35993
Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
|
|
This patch fixes the dependencies between several DPAA Ethernet driver modules
by exporting the needed functions as kernel symbols.
Signed-off-by: Marian-Cristian Rotariu <marian.rotariu@freescale.com>
Change-Id: Idf7525add92bfd20738eaac0b9d43ed62d7de0af
Reviewed-on: http://git.am.freescale.net:8181/35747
Reviewed-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com>
Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
|
|
Change-Id: I408df80410abae8d39ed73299b4e5df2e76cc8ad
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/35430
Reviewed-by: Liron Himi <Liron.Himi@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: Ic55d4f698c2d406d524e54f817a07f0810f87e25
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/35329
Reviewed-by: Liron Himi <Liron.Himi@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: I059708174df6e363b3b35102231130c1b9ccbedc
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/35897
Reviewed-by: Yangbo Lu <yangbo.lu@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
BSC9132 on-board FPGA connected on I2C bus, so add regmap support
i2c access control the QIXIS.
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Change-Id: Iecaf76384cafd9d85b13f8f95055f460a9e48f24
Reviewed-on: http://git.am.freescale.net:8181/34989
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Add DIU support for T1042d4rdb board. DIU platform code has supported
in kernel, this patch just add DT node check for T1042d4rdb.
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Change-Id: I2b524265ea3009961da445820193788d0c82e19e
Reviewed-on: http://git.am.freescale.net:8181/35832
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Chenhui Zhao <chenhui.zhao@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: Ia1830aa7a73fcc081dc6e54ee0599b10747bcd2b
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/35266
Reviewed-by: Liron Himi <Liron.Himi@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
ICV check failures are part of normal operation;
leave user notification up to the higher levels,
as is done in s/w algorithm implementations.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Tested-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 3f80be023900790d029a63e27440f1e33c048b73)
Change-Id: I6b181dd09e915cf639691cb3d696ddc22ac5f195
Reviewed-on: http://git.am.freescale.net:8181/31647
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Reviewed-by: Mircea Pop <mircea.pop@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Fix kernel crash issue in setting usb as wake-up source for system
sleep feature for relevant qoriq platforms (those supporting system
sleep via rcpm)
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Change-Id: I838234aff00800b6fafbb02ec12de7d3f2cc6075
Reviewed-on: http://git.am.freescale.net:8181/33283
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
There are 24 cpus/threads only for FMAN V3H platform.
For FMAN V3L platform like T10xx, there are only 4
cpus/threads.
Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com>
Change-Id: Idd5acc067b3e7bda9e4a6c39538f9c4078e34016
Reviewed-on: http://git.am.freescale.net:8181/35651
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
There are 4 Offline/Host Command Ports (O/H n) in t10xx platform.
This patch enables OP#2 for LAG use-cases and keep separate dt
for usdpaa scenarios for t1040d4rdb.
Change-Id: I1df879190f90f0cf7c25200cede9c4f52a7a552e
Suggested-by: Pan Jiafei <Jiafei.Pan@freescale.com>
Suggested-by: Madalin Bucur <madalin.bucur@freescale.com>
Suggested-by: Scott Wood <scottwood@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/35504
Reviewed-by: Pan Jiafei <Jiafei.Pan@freescale.com>
Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com>
Change-Id: I99d54e16abe6b8bb27099f2096d4ccea69c0b6f5
Reviewed-on: http://git.am.freescale.net:8181/35652
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: I6738d25d36476502c93f28f5023df95c4ba7adb3
Reviewed-on: http://git.am.freescale.net:8181/35494
Reviewed-by: Pan Jiafei <Jiafei.Pan@freescale.com>
Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com>
Change-Id: Ie61c478a82ce07b53fee94fcbc78984343168232
Reviewed-on: http://git.am.freescale.net:8181/35653
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|