summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-08[media] budget: Add support for Philips Semi Sylt PCI ref. designPeter Wiese
Add support for Philips Semiconductor (now NXP) SAA7146 reference design DVB Sat card, using ALPS BSRU6 tuner. [mchehab@redhat.com: Merge conflicts fix; email whitespacing unmangling] Signed-off-by: Peter Wiese <peter.wiese@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] cxd2820r_t2: Multistream support (MultiPLP)Evgeny Plehov
MultiPLP filtering support for CXD2820r. Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] cx24123: improve precision when calculating symbol rate ratioMauro Carvalho Chehab
Symbol rate ratio were using a rough calculus, as the code was limited to 32 bits arithmetic. Change it to 64 bits, in order to better estimate the bandwidth low-pass filter on the demod. This should reduce the noise and improve reception. Reported-by: Hans-Peter Jansen <hpj@urpla.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] mb86a20s: better name temp vars at mb86a20s_layer_bitrate()Mauro Carvalho Chehab
Using 'i' for the guard interval temporary var is a bad idea, as 'i' is generally used by "anonymous" indexes. Let's rename modulation, fec and guard interval temp vars with a meaningful name, as that makes easier to understand the code and avoids cut-and-paste types of error. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] mb86a20s: Fix estimate_rate settingMauro Carvalho Chehab
As reported by Dan Carpenter <dan.carpenter@oracle.com>: Smatch warnings: drivers/media/dvb-frontends/mb86a20s.c:644 mb86a20s_layer_bitrate() error: buffer overflow 'state->estimated_rate' 3 <= 3 What happens there is that estimate_rate index should be the layer number, and not the guard interval. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] mb86a20s: Use 'layer' instead of 'i' on all placesMauro Carvalho Chehab
We're using the anonymous 'i' to indicate the layer number on several places on the driver. That's not good, as some cut-and-paste type of change might be doing the wrong thing. So, call it as "layer" everywhere. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] mb86a20s: fix audio sub-channel checkMauro Carvalho Chehab
As reported by Dan Carpenter <dan.carpenter@oracle.com> FYI, there are new smatch warnings show up in: tree: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next master head: da17d7bda957ae4697b6abc0793f74fb9b50b58f commit: 04fa725e7b1c22c583dd71a8cd85b8d997edfce3 [media] mb86a20s: Implement set_frontend cache logic New smatch warnings: drivers/media/dvb-frontends/mb86a20s.c:1897 mb86a20s_set_frontend() error: buffer overflow 'mb86a20s_subchannel' 8 <= 8 04fa725e Mauro Carvalho Chehab 2013-03-04 1894 if (c->isdbt_sb_subchannel > ARRAY_SIZE(mb86a20s_subchannel)) 04fa725e Mauro Carvalho Chehab 2013-03-04 1895 c->isdbt_sb_subchannel = 0; 04fa725e Mauro Carvalho Chehab 2013-03-04 1896 04fa725e Mauro Carvalho Chehab 2013-03-04 @1897 state->subchannel = mb86a20s_subchannel[c->isdbt_sb_subchannel]; Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] mb86a20s: Use a macro for the number of layersMauro Carvalho Chehab
Instead of using the magic number "3", use NUM_LAYERS macro on all places that are related to the ISDB-T layers. This makes the source code a little more readable. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] tda8290: change magic LNA config values to enumOndrej Zary
Use enum instead of magic values for LNA config in tda8290. Update tda827x, tda18271 and saa7134 to use the enum too. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] saa7134: Add AverMedia A706 AverTV Satellite Hybrid+FMOndrej Zary
Add AverMedia AverTV Satellite Hybrid+FM (A706) card to saa7134 driver. Working: analog inputs, TV, FM radio and IR remote control. Untested: DVB-S. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] tuner-core: Change config from unsigned int to void *Ondrej Zary
config looks like a hack that was added to tuner-core to allow some configuration of TDA8290 tuner (it's not used by any other driver). But with the new configuration options of tda8290 driver (no_i2c_gate and std_map), it's no longer sufficient. Change config to be void * instead, which allows passing tuner-dependent config struct to drivers. Also update saa7134 driver to reflect this change (no other driver uses this). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] tda8290: Allow custom std_map for tda18271Ondrej Zary
Allow specifying a custom std_map for tda18271 by external configuration. This is required by cards that require custom std_map for analog TV or radio, like AverMedia A706. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] tda8290: Allow disabling I2C gateOndrej Zary
Allow disabling I2C gate handling by external configuration. This is required by cards that have all devices on a single I2C bus, like AverMedia A706. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] cx88: kernel bz#9476: Fix tone setting for Nova-S+ model 92001Mauro Carvalho Chehab
Hauppauge Nova-S-Plus DVB-S model 92001 does not lock on horizontal polarisation. According with the info provided at the BZ, model 92002 does. The difference is that, on model 92001, the tone select is done via isl6421, while, on other devices, this is done via cx24123 code. This patch adds a way to override the demod's set_tone at isl6421 driver. In order to avoid regressions, the override is enabled only for cx88 Nova S plus model 92001. For all other models and devices, the set_tone is provided by the demod driver. Patch originally proposed at bz@9476[1] by Michel Meyers and John Donoghue but applying the original patch would break support for all other devices based on isl6421. [1] https://bugzilla.kernel.org/show_bug.cgi?id=9476 Tested-by: Adam Sampson <ats@offog.org> Tested-by: Hans-Peter Jansen <hpj@urpla.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] MEDIA: ttusbir, fix double freeJiri Slaby
rc_unregister_device already calls rc_free_device to free the passed device. But in one of ttusbir's probe fail paths, we call rc_unregister_device _and_ rc_free_device. This is wrong and results in a double free. Instead, set rc to NULL resulting in rc_free_device being a noop. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] demux.h: Remove duplicated enumMauro Carvalho Chehab
"enum dmx_ts_pes" and "typedef enum dmx_pes_type_t" are just the same enum declared twice, since Kernel (2.6.12). There's no reason to duplicate it there, and sparse complains about that: drivers/media/dvb-core/dmxdev.c:600:55: warning: mixing different enum types So, remove the internal define, keeping just the external one. Internally, use only "enum dmx_ts_pes", as it is too late to drop dmx_pes_type_t from the userspace API. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Ensure proper media pipeline state on device closeSylwester Nawrocki
Make sure media_entity_pipeline_stop() is called on video device close in cases where there was VIDIOC_STREAMON ioctl and no VIDIOC_STREAMOFF. This patch fixes media entities stream_count state which could prevent links from being disconnected, due to non-zero stream_count. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Correct input DMA YUV order configurationSylwester Nawrocki
This patch fixes erroneous setup of the YUV order caused by not clearing FIMC_REG_MSCTRL_ORDER422_MASK bit field before setting proper FIMC_REG_MSCTRL_ORDER422 bits. This resulted in false colors for YUYV, YVYU, UYVY, VYUY color formats, depending in what sequence those were configured by user space. YUV order definitions are corrected so that following convention is used: | byte3 | byte2 | byte1 | byte0 -------+-------+-------+-------+------ YCBYCR | CR | Y | CB | Y YCRYCB | CB | Y | CR | Y CBYCRY | Y | CR | Y | CB CRYCBY | Y | CB | Y | CR Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Allow colorspace conversion at FIMC-LITESylwester Nawrocki
The FIMC-LITE output DMA allows to configure different YUV order than the order at the camera input interface. Thus there is some limited colorspace conversion possible. This patch makes the color format variable be per FIMC-LITE input/output, rather than a global per device. This also fixes incorrect behavior where color format at the FIMC-LITE.N subdev's source pad is modified by VIDIOC_S_FMT ioctl on the related video node. YUV order definitions are corrected so that we use notation: | byte3 | byte2 | byte1 | byte0 -------+-------+-------+-------+------ YCBYCR | CR | Y | CB | Y YCRYCB | CB | Y | CR | Y CBYCRY | Y | CR | Y | CB CRYCBY | Y | CB | Y | CR Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Use common driver data for all FIMC-LITE IP instancesSylwester Nawrocki
There is no need to use separate variant data structure for each FIMC-LITE IP instance. According to my knowledge there are no differences across them on Exynos4 as well as Exynos5 SoCs. Drop flite_variant data structure and use struct flite_drvdata instead. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Remove static driver data for Exynos4210 FIMC variantsSylwester Nawrocki
The Exynos platform will support only device tree based booting from v3.10. The FIMC variant data will be parsed directly from the device tree, hence the now unused static data can be removed. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Create media links for the FIMC-IS entitiesSylwester Nawrocki
Create disabled links from the FIMC-LITE subdevs to the FIMC-IS-ISP subdev and from FIMC-IS-ISP to all FIMC subdevs. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Add fimc-is subdevs registrationSylwester Nawrocki
This patch adds support for registration of the FIMC-IS device represented by the FIMC-IS-ISP subdev to the top level media device driver. The FIMC-IS subsystem is available on Exynos4x12 SoCs which support only device tree based booting. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Add Exynos4x12 FIMC-IS device tree binding documentationSylwester Nawrocki
This patch adds DT binding documentaton for the Imaging Subsystem (camera ISP) found on Samsung Exynos4x12 SoCs. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Add common FIMC-IS image sensor driverSylwester Nawrocki
This patch adds a common image sensor driver and Makefile/Kconfig to enable compilation of the whole IS driver. The sensor subdev driver currently only handles an image sensor's power supplies and reset signal. There is no I2C communication as it is handled by the ISP's firmware. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Add FIMC-IS parameter region definitionsSylwester Nawrocki
This patch adds the ISP processing parameters interface files. Signed-off-by: Younghwan Joo <yhwan.joo@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Add FIMC-IS ISP I2C bus driverSylwester Nawrocki
This patch adds the ISP I2C bus controller driver files. Creating a standard I2C bus adapter, even if the driver doesn't actually communicate with the hardware and it is instead controlled by the ISP firmware running on the Cortex-A5, allows to use standard hardware description in the device tree. As the sensor would have actually had a standard V4L2 sub-device driver run on the host CPU. This approach allows to adapt the driver with a relatively small effort should the Imaging Subsystem architecture change so that the I2C bus is handled by the host's CPU OS, rather than the internal FIMC-IS ARM CPU firmware. The image sensor driver could be a standard I2C client driver, as in case of most existing image sensors. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Add Exynos4x12 FIMC-IS driverSylwester Nawrocki
This patch adds a set of core files of the Exynos4x12 FIMC-IS V4L2 driver. This includes main functionality like allocating memory, loading the firmware, FIMC-IS register interface and host CPU <-> IS command and error code definitions. The driver currently exposes a single subdev named FIMC-IS-ISP, which corresponds to the FIMC-IS ISP and DRC IP blocks. The FIMC-IS-ISP subdev currently supports only a subset of user controls. For other controls we need several extensions at the V4L2 API. The supported standard controls are: brightness, contrast, saturation, hue, sharpness, 3a_lock, exposure_time_absolute, white_balance_auto_preset, iso_sensitivity, iso_sensitivity_auto, exposure_metering_mode. Signed-off-by: Younghwan Joo <yhwan.joo@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] V4L: Remove incorrect EXPORT_SYMBOL() usage at v4l2-of.cSylwester Nawrocki
v4l2_of_parse_parallel_bus() function is now static and EXPORT_SYMBOL() doesn't apply to it any more. Drop this meaningless statement, which was supposed to be done in the original merged patch. While at it, edit the copyright notice so it is sorted in both the v4l2-of.c and v4l2-of.h file in newest entries on top order, and state clearly I'm just the author of parts of the code, not the copyright owner. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Correct clock properties description at the DT binding ↵Sylwester Nawrocki
documentation The 'camera' DT node needs to have sclk_cam0/1 and pxl_async0/1 clocks specified, while 'fimc' nodes should have only "fimc" and "sclk_fimc". "mux" and "parent" are leftovers from early versions of patches adding DT support, when the IP bus clock parent clock was being set by the driver. A better solution is needed to have e.g. clocks driver setting all required parent clocks, before clock consumers start using the clocks. Currently this binding doesn't describe parent clocks setup, it needs to be specified and handled somewhere else. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Remove dependency on SYSCON for non-dt platformsSylwester Nawrocki
Currently the whole driver depends on MFD_SYSCON, which in turn depends on OF. To allow to use the driver on non-dt platforms (S5PV210) the SYSREG support is made conditional (it is needed only for dt enabled platforms) and MFD_SYSCON is selected if OF is enabled, instead of depending on OF. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos: remove unnecessary header inclusionsArnd Bergmann
In multiplatform configurations, we cannot include headers provided by only the exynos platform. Fortunately a number of drivers that include those headers do not actually need them, so we can just remove the inclusions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] soc_camera/soc_camera_platform: Fix warning related to spacingSachin Kamat
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] soc_camera/sh_mobile_ceu_camera: Fix warning related to spacingSachin Kamat
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] soc_camera/pxa_camera: Constify struct dev_pm_opsSachin Kamat
struct dev_pm_ops should be const. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] soc_camera/pxa_camera: Fix warning related to spacingSachin Kamat
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] soc_camera/mx3_camera: Fix warning related to spacingSachin Kamat
Silences the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] soc_camera/mx2_camera: Fix warnings related to spacingSachin Kamat
Fixes the following checkpatch warnings: WARNING: unnecessary whitespace before a quoted newline WARNING: please, no space before tabs Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] soc_camera/mx1_camera: Fix warnings related to spacingSachin Kamat
Fixes the following checkpatch warnings: WARNING: unnecessary whitespace before a quoted newline WARNING: please, no space before tabs Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] atmel-isi: Update error check for unsigned variablesTushar Behera
Checking '< 0' for unsigned variables always returns false. For error codes, use IS_ERR_VALUE() instead. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] soc_camera: Add RGB666 & RGB888 formatsPhil Edworthy
Based on work done by Katsuya Matsubara. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] mx2_camera: use module_platform_driver_probe()Fabio Porcedda
The commit 39793c6 "[media] mx2_camera: Convert it to platform driver" used module_platform_driver() to make code smaller, but since the driver used platform_driver_probe is more appropriate to use module_platform_driver_probe(). Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] drivers: media: use module_platform_driver_probe()Fabio Porcedda
This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> [g.liakhovetski@gmx.de: also remove redundant .probe initialisation] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] soc-camera: protect against racing open(2) and rmmodGuennadi Liakhovetski
To protect against open() racing with rmmod, hold the list_lock also while obtaining a reference to the camera host driver and check that the video device hasn't been unregistered yet. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] siano: Fix array boundary at smscore_translate_msg()Mauro Carvalho Chehab
As reported by Dan Carpenter: FYI, there are new smatch warnings show up in tree: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next master head: da17d7bda957ae4697b6abc0793f74fb9b50b58f commit: 4c3bdb5e2f5612ceb99ac17dbbe673b59a94d105 [media] siano: better debug send/receive messages drivers/media/common/siano/smscoreapi.c:396 smscore_translate_msg() error: buffer overflow 'siano_msgs' 401 <= 401 While it is almost impossible for this error to happen in practice, as it would require the siano's firmware to return an special invalid answer to a message request, fixing it is trivial. So, let's do it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-01Merge tag 'v3.9-rc5' into patchworkMauro Carvalho Chehab
Linux 3.9-rc5 * tag 'v3.9-rc5': (1080 commits) Linux 3.9-rc5 Revert "lockdep: check that no locks held at freeze time" dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function PNP: List Rafael Wysocki as a maintainer rbd: don't zero-fill non-image object requests ia64 idle: delete stale (*idle)() function pointer Btrfs: don't drop path when printing out tree errors in scrub target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit Revert "mm: introduce VM_POPULATE flag to better deal with racy userspace programs" usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD mg_disk: fix error return code in mg_probe() Btrfs: fix wrong return value of btrfs_lookup_csum() Btrfs: fix wrong reservation of csums Btrfs: fix double free in the btrfs_qgroup_account_ref() Btrfs: limit the global reserve to 512mb Btrfs: hold the ordered operations mutex when waiting on ordered extents Btrfs: fix space accounting for unlink and rename Btrfs: fix space leak when we fail to reserve metadata space ...
2013-03-31Linux 3.9-rc5Linus Torvalds
2013-03-31Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "Two fixes for slave-dmaengine. The first one is for making slave_id value correct for dw_dmac and the other one fixes the endieness in DT parsing" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function
2013-03-31Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "For a some fixes for Kernel 3.9: - subsystem build fix when VIDEO_DEV=y, VIDEO_V4L2=m and I2C=m - compilation fix for arm multiarch preventing IR_RX51 to be selected - regression fix at bttv crop logic - s5p-mfc/m5mols/exynos: a few fixes for cameras on exynos hardware" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] [REGRESSION] bt8xx: Fix too large height in cropcap [media] fix compilation with both V4L2 and I2C as 'm' [media] m5mols: Fix bug in stream on handler [media] s5p-fimc: Do not attempt to disable not enabled media pipeline [media] s5p-mfc: Fix encoder control 15 issue [media] s5p-mfc: Fix frame skip bug [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish [media] fimc-lite: Fix the variable type to avoid possible crash [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure [media] ir: IR_RX51 only works on OMAP2
2013-03-31Merge tag 'for-linus-20130331' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Alright, this time from 10K up in the air. Collection of fixes that have been queued up since the merge window opened, hence postponed until later in the cycle. The pull request contains: - A bunch of fixes for the xen blk front/back driver. - A round of fixes for the new IBM RamSan driver, fixing various nasty issues. - Fixes for multiple drives from Wei Yongjun, bad handling of return values and wrong pointer math. - A fix for loop properly killing partitions when being detached." * tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits) mg_disk: fix error return code in mg_probe() rsxx: remove unused variable rsxx: enable error return of rsxx_eeh_save_issued_dmas() block: removes dynamic allocation on stack Block: blk-flush: Fixed indent code style cciss: fix invalid use of sizeof in cciss_find_cfgtables() loop: cleanup partitions when detaching loop device loop: fix error return code in loop_add() mtip32xx: fix error return code in mtip_pci_probe() xen-blkfront: remove frame list from blk_shadow xen-blkfront: pre-allocate pages for requests xen-blkback: don't store dev_bus_addr xen-blkfront: switch from llist to list xen-blkback: fix foreach_grant_safe to handle empty lists xen-blkfront: replace kmalloc and then memcpy with kmemdup xen-blkback: fix dispatch_rw_block_io() error path rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas() Adding in EEH support to the IBM FlashSystem 70/80 device driver block: IBM RamSan 70/80 error message bug fix. block: IBM RamSan 70/80 branding changes. ...