summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-09-09[PATCH] md: fix BUG when raid10 rebuilds without enough drivesNeilBrown
This shouldn't be a BUG. We should cope. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: fix raid10 assembly when too many devices are missingNeilBrown
If you try to assemble an array with too many missing devices, raid10 will now reject the attempt, instead of allowing it. Also check when hot-adding a drive and refuse the hot-add if the array is beyond hope. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: really get sb_size setting right in all casesNeilBrown
There was another case where sb_size wasn't being set, so instead do the sensible thing and set if when filling in the content of a superblock. That ensures that whenever we write a superblock, the sb_size MUST be set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: make sure the new 'sb_size' is set properly device added without ↵NeilBrown
pre-existing superblock. There are two ways to add devices to an md/raid array. It can have superblock written to it, and then given to the md driver, which will read the superblock (the new way) or md can be told (through SET_ARRAY_INFO) the shape of the array, and the told about individual drives, and md will create the required superblock (the old way). The newly introduced sb_size was only set for drives being added the new way, not the old ways. Oops :-( Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: report spare drives in /proc/mdstatNeilBrown
Just like failed drives have (F), so spare drives now have (S). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: add information about superblock version to /proc/mdstatNeilBrown
Leave it unchanged if the original (0.90) is used, incase it might be a compatability problem. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: use queue_hardsect_size instead of block_size for md superblock ↵NeilBrown
size calc. Doh. I want the physical hard-sector-size, not the current block size... Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: choose better default offset for bitmap.NeilBrown
On reflection, a better default location for hot-adding bitmaps with version-1 superblocks is immediately after the superblock. There might not be much room there, but there is usually atleast 3k, and that is a good start. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: tidy up daemon stop/start code in md/bitmap.cNeilBrown
The bitmap code used to have two daemons, so there is some 'common' start/stop code. But now there is only one, so the common code is just noise. This patch tidies this up somewhat. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: ensure bitmap_writeback_daemon handles shutdown properly.NeilBrown
mddev->bitmap gets clearred before the writeback daemon is stopped. So the write_back daemon needs to be careful not to dereference the 'bitmap' if it is NULL. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: use kthread infrastructure in mdNeilBrown
Switch MD to use the kthread infrastructure, to simplify the code and get rid of tasklist_lock abuse in md_unregister_thread. Also don't flush signals in md_thread, as the called thread will always do that. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: write-intent bitmap support for raid6NeilBrown
This is a direct port of the raid5 patch. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: add write-intent-bitmap support to raid5NeilBrown
Most awkward part of this is delaying write requests until bitmap updates have been flushed. To achieve this, we have a sequence number (seq_flush) which is incremented each time the raid5 is unplugged. If the raid thread notices that this has changed, it flushes bitmap changes, and assigned the value of seq_flush to seq_write. When a write request arrives, it is given the number from seq_write, and that write request may not complete until seq_flush is larger than the saved seq number. We have a new queue for storing stripes which are waiting for a bitmap flush and an extra flag for stripes to record if the write was 'degraded' and so should not clear the a bit in the bitmap. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: limit size of sb read/written to appropriate amountNeilBrown
version-1 superblocks are not (normally) 4K long, and can be of variable size. Writing the full 4K can cause corruption (but only in non-default configurations). With this patch the super-block-flavour can choose a size to read, and set a size to write based on what it finds. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: remove old cruft from md_k.h header fileNeilBrown
These inlines haven't been used for ages, they should go. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: fix bitmap/read_sb_page so that it handles errors properly.NeilBrown
read_sb_page() assumed that if sync_page_io fails, the device would be marked faultly. However it isn't. So in the face of error, read_sb_page would loop forever. Redo the logic so that this cannot happen. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: allow md to load a superblock with feature-bit '1' setNeilBrown
As this is used to flag an internal bitmap. Also, introduce symbolic names for feature bits. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: allow hot-adding devices to arrays with non-persistant superblocks.NeilBrown
It is possibly (and occasionally useful) to have a raid1 without persistent superblocks. The code in add_new_disk for adding a device to such an array always tries to read a superblock. This will obviously fail. So do the appropriate test and call md_import_device with appropriate args. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: do not set mddev->bitmap until bitmap is fully initialisedNeilBrown
When hot-adding a bitmap, bitmap_daemon_work could get called while the bitmap is being created, so don't set mddev->bitmap until the bitmap is ready. This requires freeing the bitmap inside bitmap_create if creation failed part-way through. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: make sure bitmap_daemon_work actually does work.NeilBrown
The 'lastrun' time wasn't being initialised, so it could be half a jiffie-cycle before it seemed to be time to do work again. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: raid1_quiesce is back to front, fix it.NeilBrown
A state of 0 mean 'not quiesced' A state of 1 means 'is quiesced' The original code got this wrong. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: support md/linear array with components greater than 2 terabytes.NeilBrown
linear currently uses division by the size of the smallest componenet device to find which device a request goes to. If that smallest device is larger than 2 terabytes, then the division will not work on some systems. So we introduce a pre-shift, and take care not to make the hash table too large, much like the code in raid0. Also get rid of conf->nr_zones, which is not needed. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: add write-behind support for md/raid1NeilBrown
If a device is flagged 'WriteMostly' and the array has a bitmap, and the bitmap superblock indicates that write_behind is allowed, then write_behind is enabled for WriteMostly devices. Write requests will be acknowledges as complete to the caller (via b_end_io) when all non-WriteMostly devices have completed the write, but will not be cleared from the bitmap until all devices complete. This requires memory allocation to make a local copy of the data being written. If there is insufficient memory, then we fall-back on normal write semantics. Signed-Off-By: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: support write-mostly device in raid1NeilBrown
This allows a device in a raid1 to be marked as "write mostly". Read requests will only be sent if there is no other option. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: all hot-add and hot-remove of md intent logging bitmapsNeilBrown
Both file-bitmaps and superblock bitmaps are supported. If you add a bitmap file on the array device, you lose. This introduces a 'default_bitmap_offset' field in mddev, as the ioctl used for adding a superblock bitmap doesn't have room for giving an offset. Later, this value will be setable via sysfs. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: improve handling of bitmap initialisation.NeilBrown
When we find a 'stale' bitmap, possibly because it is new, we should just assume every bit needs to be set, but rather base the setting of bits on the current state of the array (degraded and recovery_cp). Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: don't allow new md/bitmap file to be set if one already existsNeilBrown
... otherwise we loose a reference and can never free the file. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] dm: fix rh_dec()/rh_inc() race in dm-raid1.cJun'ichi Nomura
Fix another bug in dm-raid1.c that the dirty region may stay in or be moved to clean list and freed while in use. It happens as follows: CPU0 CPU1 ------------------------------------------------------------------------------ rh_dec() if (atomic_dec_and_test(pending)) <the region is still marked dirty> rh_inc() if the region is clean mark the region dirty and remove from clean list mark the region clean and move to clean list atomic_inc(pending) At this stage, the region is in clean list and will be mistakenly reclaimed by rh_update_states() later. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: fail IO request to md that require a barrier.NeilBrown
md does not yet support BIO_RW_BARRIER, so be honest about it and fail (-EOPNOTSUPP) any such requests. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] md: fix minor error in raid10 read-balancing calculation.NeilBrown
'this_sector' is a virtual (array) address while 'head_position' is a physical (device) address, so substraction doesn't make any sense. devs[slot].addr should be used instead of this_sector. However, this patch doesn't make much practical different to the read balancing due to the effects of later code. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild Linus Torvalds
2005-09-09Remove "must_check" attributes in PCI-landLinus Torvalds
Don't just irritate all other kernel developers. Fix the users first, then you can re-introduce the must-check infrastructure to avoid new cases creeping in. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09Preempt-safe RCU file usageLinus Torvalds
Fix up fs/compat.c fixes.
2005-09-09[PATCH] Update PCI IOMEM allocation startDaniel Ritz
This fixes the problem with "Averatec 6240 pcmcia_socket0: unable to apply power", which was due to the CardBus IOMEM register region being allocated at an address that was actually inside the RAM window that had been reserved for video frame-buffers in an UMA setup. The BIOS _should_ have marked that region reserved in the e820 memory descriptor tables, but did not. It is fixed by rounding up the default starting address of PCI memory allocations, so that we leave a bigger gap after the final known memory location. The amount of rounding depends on how big the unused memory gap is that we can allocate IOMEM from. Based on example code by Linus. Acked-by: Greg KH <greg@kroah.com> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 Linus Torvalds
2005-09-09Fix up lost patch in compat_sys_select() for new RCU files world orderLinus Torvalds
Andrew lost this in patch reject resolution, and never noticed, since the compat code isn't in use on x86. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Linus Torvalds
2005-09-09[PATCH] Lost sockfd_put() in routing_ioctl()Kirill Korotaev
This patch adds lost sockfd_put() in 32bit compat rounting_ioctl() on 64bit platforms Signed-Off-By: Kirill Korotaev <dev@sw.ru> Signed-Off-By: Maxim Giryaev <gem@sw.ru> Signed-off-By: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] lost fput in 32bit ioctl on x86-64Kirill Korotaev
This adds a lost fput in 32bit tiocgdev ioctl on x86-64 [ chrisw: Updated to use fget_light/fput_light ] Signed-Off-By: Kirill Korotaev <dev@sw.ru> Signed-Off-By: Maxim Giryaev <gem@sw.ru> Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09kbuild: um fix so it compile with generic asm-offsets.h supportSam Ravnborg
um has it own set of files for asm-offsets. So for now the gen-asm-offset macro is just duplicated in the um Makefile. This may well be the final solution since um is a bit special compared to other architectures - time will tell. Also added a dummy arch/um/kernel/asm-offsets.h file to keep kbuild happy. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09[PATCH] trivial iomem annotations in qla2xxx/qla_dbg.cviro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] trivial __user annotations (md)viro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] trivial __user annotations (evdev)viro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] trivial __user cleanup (video1394)viro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] trivial __user annotations (ipmi)viro@ZenIV.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] more SPIN_LOCK_UNLOCKED -> DEFINE_SPINLOCK conversionsIngo Molnar
This converts the final 20 DEFINE_SPINLOCK holdouts. (another 580 places are already using DEFINE_SPINLOCK). Build tested on x86. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] timer initialization cleanup: DEFINE_TIMERIngo Molnar
Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] FUSE: don't allow restarting of system callsMiklos Szeredi
This patch removes ability to interrupt and restart operations while there hasn't been any side-effect. The reason: applications. There are some apps it seems that generate signals at a fast rate. This means, that if the operation cannot make enough progress between two signals, it will be restarted for ever. This bug actually manifested itself with 'krusader' trying to open a file for writing under sshfs. Thanks to Eduard Czimbalmos for the report. The problem can be solved just by making open() uninterruptible, because in this case it was the truncate operation that slowed down the progress. But it's better to solve this by simply not allowing interrupts at all (except SIGKILL), because applications don't expect file operations to be interruptible anyway. As an added bonus the code is simplified somewhat. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] FUSE: add fsync operation for directoriesMiklos Szeredi
This patch adds a new FSYNCDIR request, which is sent when fsync is called on directories. This operation is available in libfuse 2.3-pre1 or greater. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] fuse: don't update file timesMiklos Szeredi
Don't change mtime/ctime/atime to local time on read/write. Rather invalidate file attributes, so next stat() will force a GETATTR call. Bug reported by Ben Grimm. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>