summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-14ath9k_hw: Support fast channel change on 5GHz for AR9003 chipsRajkumar Manoharan
The commit "ath9k_hw: Improve fast channel change for AR9003 chips" fixes the fast channel change issue for AR9003 chips that was originally observed in AR9382 chip. Hence enabling fastcc support again for 11A channel for AR9003 chips. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Cleanup Tx calibrations for AR9003 chipsRajkumar Manoharan
Currently Tx IQ calibration is enabled by default for all AR9003 chips. But for AR9480, the calibration status should be read from chip after processing ini. And also the carrier leak calibration status is checked during init cal. As the init_cal is being called for fast channel change too, the tx_cl status only be read after full reset. Hence moving that into process ini function. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Add support to reuse Carrier leak calibrationRajkumar Manoharan
This patch adds support to reuse Carrier leak calibration during fast channel change for AR9480 chips. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Add support to reuse TxIQ cal measurementsRajkumar Manoharan
Pass an argument to decide whether to reuse the Tx IQ calibration measurements or not during fast channel change. This will be later used by MCI support for AR9480. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Improve fast channel change for AR9003 chipsRajkumar Manoharan
In order to reduce the overall scan time, fast channel change should be implemented properly. This patch adds fast channel change support across band switch or channel mode switch instead of doing full chip reset. During the fastcc, tx iqcal measurements are preserved and will be reloaded after successful the channel change. This patch also addressed fast channel issue where the STA can not see APs in higher than operating channel on 5GHz band after the association. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Updated AR9003 tx gain table for 5GHzRajkumar Manoharan
The 5G Tx gain table w/ XPA is updated to improve spur performance in high_power Tx gain table. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Update AR9003 initval to improve phase noiseRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Updated ar9003 initval table for AR9380Rajkumar Manoharan
The ar9003 table is updated to increase XLNA BIAS output driver strengh. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k_hw: Fix ASPM L1 issue for AR9480Rajkumar Manoharan
Because of not clearing Bit 14 of AR_WA, the ASPM L1 is not enabled when entering into sleep mode. AR9480 does not need bit 14 to be set. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mwifiex: fix make namespacecheck warningsAmitkumar Karwar
This patch takes care of warnings found by running 'make namespacecheck': 1. Remove dead code. 2. Reorder function definitions to avoid forward declarations. 3. Remove unnecessary function/structure declarations and mark them as static. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mwifiex: use separate wait condition for each command nodeAmitkumar Karwar
Currently global wait condition (adapter->cmd_wait_q.condition) is used while sending synchronous commands to FW. When two threads enter in mwifiex_send_cmd_sync() routine at the same time, both the threads wait for their command responses. Since wait condition is same for both, they wake up simultaneously after getting response of 1st command. After this when a thread is waiting for command response of 3rd command, it wakes up after getting response of 2nd command and so on. Therefore we don't wait for the response of last command(0xaa) during unload. Hence while next time loading the driver command time out is seen for INIT command. This problem is resolved by having separate wait condition flag for each command(except scan command). Since scan command is treated differently (by maintaining scan pending q etc.), newly defined flag (scan_wait_q_woken) is used as a scan wait condition. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14b43: N-PHY: report signal to mac80211Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14Revert "b43: trivial: do not report any link quality instead of invalid one"Rafał Miłecki
This reverts commit 55ad5962e97430c83d51df36fc18865ee4f78c48. I assumed N is newer than LP, which isn't true. This regressed LP case. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14net: wireless: brcm80210: include module.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: removed file wifi.cAlwin Beukers
Wifi.c was empty after previous cleanups, so it was removed. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: moved function brcmu_format_flagsAlwin Beukers
Moved the brcmu_format_flags function and brcmu_bit_desc structure into smac. Names were adjusted accordingly. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: moved function brcmu_mkiovarAlwin Beukers
Moved the brcmu_mkiovar function into fmac, adjusting the name accordingly. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: moved function brcmu_chspec_malformedAlwin Beukers
Moved brcmu_chspec_malformed into the only file using it. The function name was adjusted accordingly. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: moved function brcmu_parse_tlvsAlwin Beukers
Moved the brcmu_parse_tlvs function and brcmu_tlv structure into the only file using them. Names were adjusted accordingly. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: moved function brcmu_chipnameAlwin Beukers
Moved the brcmu_chipname function into the only file using it. The function name was adjusted accordingly. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: moved power conversion functionsAlwin Beukers
Moved brcmu_mw_to_qdbm and brcmu_qdbm_to_mw functions into the only file using them. Names were adjusted accordingly. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: removed unused functionsAlwin Beukers
Removed brcmu_bitcount, brcmu_mhz2channel, brcmu_chspec_ctlchan. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: fmac: fixed weird indentationRoland Vossen
And changed function name to something more appropriate. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: use endian annotation for scan time configurationArend van Spriel
For scanning several timeout parameters are configured on the device. These parameters have been endian annotated and converted appropriately. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: use endian annotation for roaming related parametersArend van Spriel
The parameters for roaming are sent to the device and should be little endian. These have been annotated and converted appropriately. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: use endian annotations for assoc ie length requestArend van Spriel
The driver requests the device for number of ie's in assoc request and response. This needed to be endian annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: use endian annotation for pmk related structureArend van Spriel
The pairwise master key configuration is sent to the device. The structure has been annotated for endianess checking. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: use endian annotations in scan related functionArend van Spriel
The scan related functions provide scan parameters to the device which need to be in little-endian. These parameters have been annotated and conversions were placed as needed. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: fix annotations in TOE configuration functionsArend van Spriel
The configuration function for the TCP offload engine were not taking CPU endianess into account. Proper annotations and conversions have been added. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: rename variable in _brcmf_set_multicast_list()Arend van Spriel
The variable allmulti was used to provision IFF_ALLMULTI to the device as well as IFF_PROMISC. For clarity the variable has been renamed. Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: add endian annotation to packet filter structuresArend van Spriel
The packet filter structures were byte copied and transferred over the host bus to the device. As such they are little endian and have been annotated accordingly. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: fix sparse endianess error in mac80211_if.cArend van Spriel
The ht capabilities provided upon registration with mac80211 must be in little endian. This was fixed adding cpu_to_le16() conversion. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: remove sparse warning in fullmac debug functionArend van Spriel
The debug function did a write operation which required a different pointer type resulting in a sparse warning. Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: cleanup function prototypesAlwin Beukers
- removed unneeded fn prototypes from include files. - explicitly marked fn prototypes as extern in include files. - reordered functions to account for removed forward declarations in include files. - removed unused functions: brcms_c_txflowcontrol_override, brcms_c_txflowcontrol_prio_isset, brcms_c_txflowcontrol. Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: smac: decreased timer callback irq levelRoland Vossen
Timer functions were called at soft-irq level, leading to the limitation that mutexes could not be used. Lifted this limitation by migrating to work queues. Reviewed-by: Alwin Beukers <alwin@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14brcm80211: smac: removed redundant timer function parametersRoland Vossen
Parameter 'wl' is already stored in struct brcms_timer, so the number of function parameters could be decreased. Reviewed-by: Alwin Beukers <alwin@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mac80211: reformat TX unauthorised checkJohannes Berg
Reformat the check, the indentation is completely strange. Also change the last part of the condition to make the code shorter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: fix priv->cfg->ht_params NULL pointer dereferenceStanislaw Gruszka
This fix regression introduced by commit: commit 15b3f3b006b42a678523cad989bfd60b76bf4403 Author: Wey-Yi Guy <wey-yi.w.guy@intel.com> Date: Fri Jun 3 07:54:13 2011 -0700 iwlagn: set smps mode after assoc for 1000 device Also remove unneeded brackets on the way. Address: https://bugzilla.redhat.com/show_bug.cgi?id=744155 Cc: stable@kernel.org # 3.1+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwmc3200wifi: add a range check to iwm_cfg80211_get_key()Dan Carpenter
Smatch complains that "key_index" is capped at 5 in nl80211_get_key() but iwm->keys[] only has 4 elements. I don't know if this is really needed, but the other ->get_key() implementations seemed to check for overflows so I've added a check here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14rtlwifi: rtl8192de: Updates from latest Reaktek driver - Part IIIChaoming Li
This patch incorporate the differences between the 06/20/2011 and 08/16/2011 Realtek releases of the rtl8192de driver. The changes include: 1. Update for new chip versions Signed-off-by: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14rtlwifi: rtl8192se: Updates from latest Realtek driver version - Part IIChaoming Li
This patch incorporate the differences between the 06/20/2011 and 08/16/2011 Realtek releases of the rtl8192se driver. The changes include: 1. Fixing some typos in register usage. 2. A change in the handling of decryption status for 802.11w packets. Signed-off-by: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14rtlwifi: rtl8192ce: Add new chip revisionsChaoming Li
This patch incorporate the differences between the 06/20/2011 and 08/16/2011 Realtek releases of the rtlwifi driver. The changes include: 1. Adding new chip revisions including new firmware. Signed-off-by: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14rtlwifi: Update to new Realtek version - Part IChaoming Li
This patch incorporate the differences between the 06/20/2011 and 08/16/2011 Realtek releases of the rtlwifi driver. The changes include: 1. Handling of IEEE80211_HW_CONNECTION_MONITOR. 2. Fix typo to get proper response to nullfunc frames. Signed-off-by: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14rtlwifi: Change PCI drivers to use the new PM frameworkLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mac80211: Populate radiotap header with MCS info for TX framesHelmut Schaa
mac80211 already filled in the MCS rate info for rx'ed frames but tx'ed frames that are sent to a monitor interface during the status callback lack this information. Add the radiotap fields for MCS info to ieee80211_tx_status_rtap_hdr and populate them when sending tx'ed frames to the monitors. The needed headroom is only extended by one byte since we don't include legacy rate information in the rtap header for HT frames. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mac80211: Build TX radiotap header dynamicallyHelmut Schaa
Get rid of the ieee80211_tx_status_rtap_hdr struct and instead build the rtap header dynamically. This makes it easier to extend the rtap header generation in the future. Add ieee80211_tx_radiotap_len to calculate the expected size of the rtap header before generating it. Since we can't check if the rtap header fits into the requested headroom during compile time anymore add a WARN_ON_ONCE. Also move the actual rtap header generation into its own function. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: add missing include to iwl-agn-rs.hEmmanuel Grumbach
A few were missing Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: remove uneeded include to iwl-dev.hEmmanuel Grumbach
iwl-core.c and iwl-trans-pcie-tx.c don't need to include iwl-dev.h Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: move iwl_enable_rfkill_int and kill iwl-helpers.hEmmanuel Grumbach
Move iwl_enable_rfkill_int to iwl-core.h, and remove the empty iwl-helpers.h Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: move iwl_beacon_time_mask_XXX near to usageEmmanuel Grumbach
Since iwl_beacon_time_mask_[high,low] are used in iwl-core.c only, move them to there. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-07-14 18:26:48 (GMT)