summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-08drbd: Dropped wrong clause to generate new current UUIDsPhilipp Reisner
Looks like a remainder from long ago. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: receive_protocol(): We cannot change our own data-integrity-alg ↵Andreas Gruenbacher
setting here Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Be consistent in reporting incompatibilities in P_PROTOCOL settingsAndreas Gruenbacher
Refer to the settings by the names which drbdsetup and drbd.conf are using. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: receive_protocol(): Make the program flow less confusingAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: receive_protocol(): Give variables more easily searchable namesAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Print memory address in hex instead of decimal in error messageAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Allow to create devices with a minor number > minor_countAndreas Gruenbacher
The minor_count module/kernel parameter serves to scale the size of drbd's internal memory pool, but it is no longer a limit for the number of minors or the minor number. (Minor numbers can be arbitrarily high within the allowed limit of 2^20.) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fix the maximum accepted minor device numberAndreas Gruenbacher
The maximum minor device number allowed by the kernel is (1<<20 - 1). Reject device numbers higher than that to earlier catch possible errors. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Define scale factors in a single placeAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Changed some defaultsPhilipp Reisner
* Enabled the resync controller, with a fill target of 50Kib. That gives reasonable resync speeds without tuning. A much better default than the 250KiB/s fixed. * Enable bitmap compression. It is save to use, and most people have more CPU power than network bandwidth. * ko-count of 7: Abort a connection if the peer fails to process a write request within 42 seconds. * al-extents of 1237: ~5 GiB seems to be a much more sane default these days. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: report net config even for resources without a single volumeLars Ellenberg
Currently it is legal (though unusual) to create and connect a resource, before adding in all necessary volumes. We should include the network configuration details, even if we don't have a single volume (yet). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Correctly handle resources without volumesPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Eliminated the "notified peer" messagesPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fixed removal of volumes/devices from connected resourcesPhilipp Reisner
When removing a volume/device we need to switch the connection status of the peer back into WFReportParams. Before this fix it was left in Connected state. That means that the peer device continued to inform us about state changes, etc... But we deleted that minor -> protocol error. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: on attach, enforce clean meta dataLars Ellenberg
Detection of unclean shutdown has moved into user space. The kernel code will, whenever it updates the meta data, mark it as "unclean", and will refuse to attach to such unclean meta data. "drbdadm up" now schedules "drbdmeta apply-al", which will apply the activity log to the bitmap, and/or reinitialize it, if necessary, as well as set a "clean" indicator flag. This moves a bit code out of kernel space. As a side effect, it also prevents some 8.3 module from accidentally ignoring the 8.4 style activity log, if someone should downgrade, whether on purpose, or accidentally because he changed kernel versions without providing an 8.4 for the new kernel, and the new kernel comes with in-tree 8.3. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: detach from frozen backing devicePhilipp Reisner
* drbd-8.3: documentation: Documented detach's --force and disk's --disk-timeout drbd: Implemented the disk-timeout option drbd: Force flag for the detach operation drbd: Allow new IOs while the local disk in in FAILED state drbd: Bitmap IO functions can not return prematurely if the disk breaks drbd: Added a kref to bm_aio_ctx drbd: Hold a reference to ldev while doing meta-data IO drbd: Keep a reference to the bio until the completion handler finished drbd: Implemented wait_until_done_or_disk_failure() drbd: Replaced md_io_mutex by an atomic: md_io_in_use drbd: moved md_io into mdev drbd: Immediately allow completion of IOs, that wait for IO completions on a failed disk drbd: Keep a reference to barrier acked requests Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Improve the "unexpected packet" error messagesAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fixed state transitions in case reading meta data failesPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Improve compatibility with drbd's older than 8.3.7Philipp Reisner
Regression introduced with 8.3.11 commit: drbd: Take a more conservative approach when deciding max_bio_size Never ever tell an older drbd, that we support more than 32KiB in a single data request (packet). Never believe an older drbd, that is supports more than 32KiB in a single data request (packet) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fixes from the 8.3 development branchPhilipp Reisner
* commit 'ae57a0a': drbd: Only print sanitize state's warnings, if the state change happens drbd: we should write meta data updates with FLUSH FUA drbd: fix limit define, we support 1 PiByte now drbd: fix log message argument order drbd: Typo in user-visible message. drbd: Make "(rcv|snd)buf-size" and "ping-timeout" available for the proxy, too. drbd: Allow keywords to be used in multiple config sections. drbd: fix typos in comments. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: downgraded error printk to infoLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: allow ping-timeout of up to 30 secondsLars Ellenberg
Allow up to 300 centi-seconds to be configured for the "ping timeout". There may be setups where heavy congestion, huge buffers, and asymmetric bandwidth limitations may need a "huge" ping-timeout as work-around for "spurious connection loss" problems. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08DRBD: Fix comparison always false warning due to long/long long compareDavid Howells
Fix warnings of the following nature in the drbd header: In file included from drivers/block/drbd/drbd_bitmap.c:32: drivers/block/drbd/drbd_int.h: In function 'drbd_get_syncer_progress': drivers/block/drbd/drbd_int.h:2234: warning: comparison is always false due to limited range of data where mdev->rs_total (an unsigned long) is being compared to 1ULL << 32, which is always false on a 32-bit machine. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename --dry-run to --tentativeAndreas Gruenbacher
drbdadm already has a --dry-run option, so this option cannot directly be passed through to drbdsetup. Rename the drbdsetup option to resolve this conflict. For backward compatibility, make --dry-run an alias of --tentative. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Remove dead codeAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Allow to pass resource options to the new-resource commandAndreas Gruenbacher
This is equivalent to how the attach and connect commands work. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Convert the generic netlink interface to accept connection endpointsAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename DRBD_ADM_NEED_{CONN -> RESOURCE}Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Split off netlink mandatory attribute handling into separate fileAndreas Gruenbacher
Duplicate this file in the kernel module and in user space; both sides need it. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Also need to check for DRBD_GENLA_F_MANDATORY flags before ↵Andreas Gruenbacher
nla_find_nested() This is done by introducing drbd_nla_find_nested() which handles the flag before calling nla_find_nested(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Use the terminology suggested by the command names in the source code ↵Andreas Gruenbacher
and messages Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: spelling fix: too smallLars Ellenberg
It is not "to small", but "too small". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: cosmetic: fix accidental division instead of modulo when pretty printingLars Ellenberg
For large resync rates, seq_printf_with_thousands_grouping() accidentally only produced Y,000,00Y, instead of the real numbers. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Use DRBD_MINOR_COUNT_DEF in one more placeAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Lower log priority for an event that is definitely not an errorPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Don't use empty nested netlink attributesAndreas Gruenbacher
Before mainline commit ea5693cc (v2.6.29-rc1), empty nested netlink attributes were not allowed. Fix that by leaving out nested attributes if they are empty and by allowing the top-level attributes to be missing. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: drbd_adm_prepare(): Pass through error codesAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: drbd_nla_check_mandatory(): Need to remove the DRBD_GENLA_F_MANDATORY ↵Andreas Gruenbacher
flag first We need to remove the flag before checking for valid types. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Make drbd's use of netlink attribute flags less confusingAndreas Gruenbacher
Make it more clear in the flag names which flags are internal to drbd, and which are not. The check for mandatory attributes is the only extension visible at the netlink layer. Attributes with this flag set would look like unknown attributes to some kernel versions. The netlink layer would ignore them and also skip consistency checks on the attribute type and legth. To avoid this, we check for mandatory attributes first, remove the mandatory flag, and then process the attributes normally. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Remove unused GENLA_F_MAY_IGNORE flagAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Output signed / unsigned netlink fields correctlyAndreas Gruenbacher
Note: All input values are still treated as signed; unsigned long long values are still broken. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Use more generic constant namesAndreas Gruenbacher
These constants are useful for the same purpose in more than one place. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Send PROTOCOL_UPDATE packets when appropriatePhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Receiving part for the PROTOCOL_UPDATE packetPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Allocation of int_dig_in and int_dig_vv was missingPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Made cmp_after_sb() more generic into convert_after_sb()Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: protect updates to integrits_tfm by tconn->data->mutexPhilipp Reisner
Since we need to hold that mutex anyways to make sure the peer gets that change in the right position in the data stream, it makes a lot of sense to use the same mutex to ensure existence of the tfm. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Refuse to change network options online when...Philipp Reisner
* the peer does not speak protocol_version 100 and the user wants to change one of: - wire_protocol - two_primaries - integrity_alg * the user wants to remove the allow_two_primaries flag when there are two primaries Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename DISK_SIZE_SECT -> DISK_SIZEAndreas Gruenbacher
We don't have the units in constant names in other places, either. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Convert resync-after into a signed netlink fieldAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
generated by cgit v0.10.2 at 2024-11-18 11:21:29 (GMT)