summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-28netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYsDavid Daney
The IEEE802.3 clause 45 MDIO bus protocol allows for directly addressing PHY registers using a 21 bit address, and is used by many 10G Ethernet PHYS. Already existing is the ability of MDIO bus drivers to use clause 45, with the MII_ADDR_C45 flag. Here we add struct phy_c45_device_ids to hold the device identifier registers present in clause 45. struct phy_device gets a couple of new fields: c45_ids to hold the identifiers and is_c45 to signal that it is clause 45. get_phy_device() gets a new parameter is_c45 to indicate that the PHY device should use the clause 45 protocol, and its callers are adjusted to pass false. The follow-on patch to of_mdio.c will pass true where appropriate. EXPORT phy_device_create() so that the follow-on patch to of_mdio.c can use it to create phy devices for PHYs, that have non-standard device identifier registers, based on the device tree bindings. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28net: fec: add phy-reset-duration for device tree probeShawn Guo
Different boards may require different phy reset duration. Add property phy-reset-duration for device tree probe, so that the boards that need a longer reset duration can specify it in their device tree. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28net: fec: phy-reset-gpios is optionalShawn Guo
The phy-reset-gpios is an optional property for fec device tree boot. Change the binding document to match the driver code. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28net: fec: use managed function devm_gpio_request_oneShawn Guo
Using gpio_request_one will require the probe fail-out call gpio_free, which is missing currently. Change to use devm_gpio_request_one to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28net: fec: enable regulator for fec phyShawn Guo
If bootloader or platform initialization code does not enable the power supply to fec phy, we need to do it in fec driver before calling fec_reset_phy to have the phy powered on. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28net: fec: reset phy after pinctrl setupShawn Guo
In case that bootloader or platform initialization does not set up fec pins, the fec_reset_phy will not be able to succeed, because fec_reset_phy is currently called before devm_pinctrl_get_select_default. Move fec_reset_phy call to the place between devm_pinctrl_get_select_default and fec_enet_init to have above case be taken care. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28bnx2: Add missing netif_tx_disable() in bnx2_close()Michael Chan
to stop all tx queues. Update version to 2.2.3. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28bnx2: Add "fall through" commentsMichael Chan
to indicate that the mising break statements are intended. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28cnic: Handle RAMROD_CMD_ID_CLOSE error.Eddie Wai
If firmware returns error status, proceed to close the iSCSI connection. Update version to 2.5.11. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28cnic: Remove uio mem[0].Michael Chan
This memory region is no longer used. Userspace gets the BAR address directly from sysfs. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28cnic: Read bnx2x function number from internal registerEddie Wai
so that it will work on any hypervisor. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28cnic: Fix occasional NULL pointer dereference during reboot.Michael Chan
We register with bnx2x before we allocate ctx_tbl structure, so it is possible for bnx2x to call cnic_ctl before the structure is allocated. This can sometimes cause NULL pointer dereference of cp->ctx_tbl. We fix this by adding simple checking for valid state before proceeding. The cnic_ctl call is RCU protected so we don't have to deal with race conditions. Because of the additional checking, we need to finish the shutdown before clearing the CNIC_UP flag. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28Revert "ipv4: tcp: dont cache unconfirmed intput dst"David S. Miller
This reverts commit c074da2810c118b3812f32d6754bd9ead2f169e7. This change has several unwanted side effects: 1) Sockets will cache the DST_NOCACHE route in sk->sk_rx_dst and we'll thus never create a real cached route. 2) All TCP traffic will use DST_NOCACHE and never use the routing cache at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: added support for 40GbE link.parav.pandit@emulex.com
1. removed code replication for tov calculation for 1G, 10G and made is common for speed > 1G (1G, 10G, 40G, 100G). 2. defines values for #4 different 40G Phys (KR4, LF4, SR4, CR4) Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: skb_free_datagram_locked() doesnt drop all packetsEric Dumazet
dropwatch wrongly diagnose all received UDP packets as drops. This patch removes trace_kfree_skb() done in skb_free_datagram_locked(). Locations calling skb_free_datagram_locked() should do it on their own. As a result, drops are accounted on the right function. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27netlink: Get rid of obsolete rtnetlink macrosThomas Graf
Removes all RTA_GET*() and RTA_PUT*() variations, as well as the the unused rtattr_strcmp(). Get rid of rtm_get_table() by moving it to its only user decnet. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27decnet: Do not use RTA_PUT() macrosThomas Graf
Also, no need to trim on nlmsg_put() failure, nothing has been added yet. We also want to use nlmsg_end(), nlmsg_new() and nlmsg_free(). Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27ip6mr: Do not use RTA_PUT() macrosThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27ipmr: Do not use RTA_PUT() macrosThomas Graf
Also fix a needless skb tailroom check for a 4 bytes area after after each rtnexthop block. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27inet_diag: Do not use RTA_PUT() macrosThomas Graf
Also, no need to trim on nlmsg_put() failure, nothing has been added yet. We also want to use nlmsg_end(), nlmsg_new() and nlmsg_free(). Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27sock_diag: Do not use RTA_PUT() macrosThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27unix_diag: Do not use RTA_PUT() macrosThomas Graf
Also, no need to trim on nlmsg_put() failure, nothing has been added yet. We also want to use nlmsg_end(), nlmsg_new() and nlmsg_free(). Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27ipv4: tcp: dont cache unconfirmed intput dstEric Dumazet
DDOS synflood attacks hit badly IP route cache. On typical machines, this cache is allowed to hold up to 8 Millions dst entries, 256 bytes for each, for a total of 2GB of memory. rt_garbage_collect() triggers and tries to cleanup things. Eventually route cache is disabled but machine is under fire and might OOM and crash. This patch exploits the new TCP early demux, to set a nocache boolean in case incoming TCP frame is for a not yet ESTABLISHED or TIMEWAIT socket. This 'nocache' boolean is then used in case dst entry is not found in route cache, to create an unhashed dst entry (DST_NOCACHE) SYN-cookie-ACK sent use a similar mechanism (ipv4: tcp: dont cache output dst for syncookies), so after this patch, a machine is able to absorb a DDOS synflood attack without polluting its IP route cache. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Hans Schillstrom <hans.schillstrom@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27be2net: Fix to trim skb for padded vlan packets to workaround an ASIC BugSomnath Kotur
Fixed spelling error in a comment as pointed out by DaveM. Also refactored existing code a bit to provide placeholders for another ASIC Bug workaround that will be checked-in soon after this. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: add support for set_ringparam/get_ringparamYoshihiro Shimoda
This patch supports the ethtool's set_ringparam() and get_ringparam(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: fix up the buffer pointersYoshihiro Shimoda
After freeing the buffer, the driver should change the value of the pointer to NULL. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: remove unnecessary members/definitionsYoshihiro Shimoda
This patch removes unnecessary members in sh_th_private. This patch also removes unnecessary definitions in sh_eth.h Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: remove unnecessary functionYoshihiro Shimoda
The sh_eth_timer() called mod_timer() for itself. So, this patch removes the function. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27bnx2x: Change bnx2x_tests_str_arr to static charMerav Sicron
This patch changes the definition of bnx2x_tests_str_arr from char to static char. This correction will also eliminate the sparse warning created in commit cf2c1df62e065bfc15e38daf2d3479a56b320f29. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27bnx2x, bnx2fc, bnx2i, cnic: Add statistics support and FCoE capabilities ↵Barak Witkowski
advertisement 1. When FCoE offload driver is registered, copy its capabilities to the chip scratchpad. 2. Copy FCoE/iSCSI MAC addresses in aligned manner to chip scratchpad. 3. Add FCoE/iSCSI statistics collection support Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-276lowpan: double unlock on an error pathDan Carpenter
We already unlocked a few lines earlier here, so we can go directly to drop without passing through unlock. This was introduced recently in c5d3687f6c ('6lowpan: read data from skb safely'). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27netlink: Delete NLMSG_PUT and NLMSG_NEW.David S. Miller
No longer used and a poor interface as they were macros with embedded gotos. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27pkt_sched: sch_api: Move away from NLMSG_NEW().David S. Miller
And use nlmsg_data() while we're here too, as well as remove a useless cast. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27pkt_sched: cls_api: Move away from NLMSG_NEW().David S. Miller
And use nlmsg_data() while we're here too, as well as remove a useless cast. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27decnet: dn_table: Move away from NLMSG_NEW().David S. Miller
And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27decnet: dn_route: Move away from NLMSG_NEW().David S. Miller
And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27audit: netlink: Move away from NLMSG_NEW().David S. Miller
And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27infiniband: netlink: Move away from NLMSG_NEW().David S. Miller
And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27selinux: netlink: Move away from NLMSG_PUT().David S. Miller
And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27unix_diag: Move away from NLMSG_PUT().David S. Miller
And use nlmsg_data() while we're here too and remove useless casts. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27pkt_sched: act_api: Move away from NLMSG_PUT().David S. Miller
Move away from NLMSG_NEW() as well. And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27netfilter: nfnetlink_queue_core: Move away from NLMSG_PUT().David S. Miller
And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27netfilter: nfnetlink_log: Move away from NLMSG_PUT().David S. Miller
And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27netfilter: ipt_ULOG: Move away from NLMSG_PUT().David S. Miller
And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27inet_diag: Move away from NLMSG_PUT().David S. Miller
And use nlmsg_data() while we're here too, and remove useless casts. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27decnet: dn_rtmsg: Move away from NLMSG_PUT().David S. Miller
And use nlmsg_data() while we're here too. Also, remove pointless kernel log message. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27netfilter: ebt_ulog: Move away from NLMSG_PUT().David S. Miller
And use nlmsg_data() while we're here too. Also, free and NULL out skb when nlmsg_put() fails and remove pointless kernel log message. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27gdm72xx: Move away from NLMSG_PUT().David S. Miller
And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27connector: Move cn_test.c away from NLMSG_PUT().David S. Miller
And use nlmsg_data() while we're here too. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27connector: use nlmsg_put() instead of NLMSG_PUT() macro.Javier Martinez Canillas
The NLMSG_PUT() macro contains a hidden goto which makes the code hard to audit and very error prone. While been there also use the inline function nlmsg_data() instead of the NLMSG_DATA() macro to do explicit type checking. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>