summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-14KVM: nVMX: Avoid reading VM_EXIT_INTR_ERROR_CODE needlessly on nested exitsJan Kiszka
We only need to update vm_exit_intr_error_code if there is a valid exit interruption information and it comes with a valid error code. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-14KVM: nVMX: Fix conditions for interrupt injectionJan Kiszka
If we are entering guest mode, we do not want L0 to interrupt this vmentry with all its side effects on the vmcs. Therefore, injection shall be disallowed during L1->L2 transitions, as in the previous version. However, this check is conceptually independent of nested_exit_on_intr, so decouple it. If L1 traps external interrupts, we can kick the guest from L2 to L1, also just like the previous code worked. But we no longer need to consider L1's idt_vectoring_info_field. It will always be empty at this point. Instead, if L2 has pending events, those are now found in the architectural queues and will, thus, prevent vmx_interrupt_allowed from being called at all. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-14KVM: nVMX: Rework event injection and recoveryJan Kiszka
The basic idea is to always transfer the pending event injection on vmexit into the architectural state of the VCPU and then drop it from there if it turns out that we left L2 to enter L1, i.e. if we enter prepare_vmcs12. vmcs12_save_pending_events takes care to transfer pending L0 events into the queue of L1. That is mandatory as L1 may decide to switch the guest state completely, invalidating or preserving the pending events for later injection (including on a different node, once we support migration). This concept is based on the rule that a pending vmlaunch/vmresume is not canceled. Otherwise, we would risk to lose injected events or leak them into the wrong queues. Encode this rule via a WARN_ON_ONCE at the entry of nested_vmx_vmexit. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-14KVM: nVMX: Fix injection of PENDING_INTERRUPT and NMI_WINDOW exits to L1Jan Kiszka
Check if the interrupt or NMI window exit is for L1 by testing if it has the corresponding controls enabled. This is required when we allow direct injection from L0 to L2 Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-14KVM: emulator: mark 0xff 0x7d opcode as undefined.Gleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-14KVM: emulator: Do not fail on emulation of undefined opcodeGleb Natapov
Emulation of undefined opcode should inject #UD instead of causing emulation failure. Do that by moving Undefined flag check to emulation stage and injection #UD there. Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-14KVM: VMX: do not try to reexecute failed instruction while emulating invalid ↵Gleb Natapov
guest state During invalid guest state emulation vcpu cannot enter guest mode to try to reexecute instruction that emulator failed to emulate, so emulation will happen again and again. Prevent that by telling the emulator that instruction reexecution should not be attempted. Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-14KVM: emulator: fix unimplemented instruction detectionGleb Natapov
Unimplemented instruction detection is broken for group instructions since it relies on "flags" field of opcode to be zero, but all instructions in a group inherit flags from a group encoding. Fix that by having a separate flag for unimplemented instructions. Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-11KVM: x86 emulator: Fix segment loading in VM86Kevin Wolf
This fixes a regression introduced in commit 03ebebeb1 ("KVM: x86 emulator: Leave segment limit and attributs alone in real mode"). The mentioned commit changed the segment descriptors for both real mode and VM86 to only update the segment base instead of creating a completely new descriptor with limit 0xffff so that unreal mode keeps working across a segment register reload. This leads to an invalid segment descriptor in the eyes of VMX, which seems to be okay for real mode because KVM will fix it up before the next VM entry or emulate the state, but it doesn't do this if the guest is in VM86, so we end up with: KVM: entry failed, hardware error 0x80000021 Fix this by effectively reverting commit 03ebebeb1 for VM86 and leaving it only in place for real mode, which is where it's really needed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-08KVM: Move kvm_rebooting declaration out of x86Geoff Levand
The variable kvm_rebooting is a common kvm variable, so move its declaration from arch/x86/include/asm/kvm_host.h to include/asm/kvm_host.h. Fixes this sparse warning when building on arm64: virt/kvm/kvm_main.c:warning: symbol 'kvm_rebooting' was not declared. Should it be static? Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-08KVM: Move kvm_spurious_fault to x86.cGeoff Levand
The routine kvm_spurious_fault() is an x86 specific routine, so move it from virt/kvm/kvm_main.c to arch/x86/kvm/x86.c. Fixes this sparse warning when building on arm64: virt/kvm/kvm_main.c:warning: symbol 'kvm_spurious_fault' was not declared. Should it be static? Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-08KVM: Make local routines staticGeoff Levand
The routines get_user_page_nowait(), kvm_io_bus_sort_cmp(), kvm_io_bus_insert_dev() and kvm_io_bus_get_first_dev() are only referenced within kvm_main.c, so give them static linkage. Fixes sparse warnings like these: virt/kvm/kvm_main.c: warning: symbol 'get_user_page_nowait' was not declared. Should it be static? Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-08KVM: Move vm_list kvm_lock declarations out of x86Geoff Levand
The variables vm_list and kvm_lock are common to all architectures, so move the declarations from arch/x86/include/asm/kvm_host.h to include/linux/kvm_host.h. Fixes sparse warnings like these when building for arm64: virt/kvm/kvm_main.c: warning: symbol 'kvm_lock' was not declared. Should it be static? virt/kvm/kvm_main.c: warning: symbol 'vm_list' was not declared. Should it be static? Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-08KVM: VMX: Add missing braces to avoid redundant error checkJan Kiszka
The code was already properly aligned, now also add the braces to avoid that err is checked even if alloc_apic_access_page didn't run and change it. Found via Coccinelle by Fengguang Wu. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-08KVM: x86: fix memory leak in vmx_initYang Zhang
Free vmx_msr_bitmap_longmode_x2apic and vmx_msr_bitmap_longmode if kvm_init() fails. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-07kvm: fix MMIO/PIO collision misdetectionMichael S. Tsirkin
PIO and MMIO are separate address spaces, but ioeventfd registration code mistakenly detected two eventfds as duplicate if they use the same address, even if one is PIO and another one MMIO. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-07KVM: nVMX: Check exit control for VM_EXIT_SAVE_IA32_PAT, not entry controlsJan Kiszka
Obviously a copy&paste mistake: prepare_vmcs12 has to check L1's exit controls for VM_EXIT_SAVE_IA32_PAT. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-07KVM: Call kvm_apic_match_dest() to check destination vcpuYang Zhang
For a given vcpu, kvm_apic_match_dest() will tell you whether the vcpu in the destination list quickly. Drop kvm_calculate_eoi_exitmap() and use kvm_apic_match_dest() instead. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-07KVM: s390: virtio_ccw: reset errors for new I/O.Cornelia Huck
ccw_io_helper neglected to reset vcdev->err after a new channel program had been successfully started, resulting in stale errors delivered after one I/O failed. Reset the error after a new channel program has been successfully started with no old I/O pending. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-07Revert "KVM: MMU: Move kvm_mmu_free_some_pages() into kvm_mmu_alloc_page()"Takuya Yoshikawa
With the following commit, shadow pages can be zapped at random during a shadow page talbe walk: KVM: MMU: Move kvm_mmu_free_some_pages() into kvm_mmu_alloc_page() 7ddca7e43c8f28f9419da81a0e7730b66aa60fe9 This patch reverts it and fixes __direct_map() and FNAME(fetch)(). Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02pmu: prepare for migration supportPaolo Bonzini
In order to migrate the PMU state correctly, we need to restore the values of MSR_CORE_PERF_GLOBAL_STATUS (a read-only register) and MSR_CORE_PERF_GLOBAL_OVF_CTRL (which has side effects when written). We also need to write the full 40-bit value of the performance counter, which would only be possible with a v3 architectural PMU's full-width counter MSRs. To distinguish host-initiated writes from the guest's, pass the full struct msr_data to kvm_pmu_set_msr. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: Enable KVM_CAP_NR_MEMSLOTS on s390Nick Wang
Return KVM_USER_MEM_SLOTS in kvm_dev_ioctl_check_extension(). Signed-off-by: Nick Wang <jfwang@us.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: Remove the sanity checks for kvm memory slotNick Wang
To model the standby memory with memory_region_add_subregion and friends, the guest would have one or more regions of ram. Remove the check allowing only one memory slot and the check requiring the real address of memory slot starts at zero. Signed-off-by: Nick Wang <jfwang@us.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: Change the virtual memory mapping location for virtio devicesNick Wang
The current location for mapping virtio devices does not take into consideration the standby memory. This causes the failure of mapping standby memory since the location for the mapping is already taken by the virtio devices. To fix the problem, we move the location to beyond the end of standby memory. Signed-off-by: Nick Wang <jfwang@us.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: fix compile with !CONFIG_COMPATHeiko Carstens
arch/s390/kvm/priv.c should include both linux/compat.h and asm/compat.h. Fixes this one: In file included from arch/s390/kvm/priv.c:23:0: arch/s390/include/asm/compat.h: In function ‘arch_compat_alloc_user_space’: arch/s390/include/asm/compat.h:258:2: error: implicit declaration of function ‘is_compat_task’ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: fix stsi exception handlingHeiko Carstens
In case of an exception the guest psw condition code should be left alone. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-By: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: fix and enforce return code handling for irq injectionsHeiko Carstens
kvm_s390_inject_program_int() and friends may fail if no memory is available. This must be reported to the calling functions, so that this gets passed down to user space which should fix the situation. Alternatively we end up with guest state corruption. So fix this and enforce return value checking by adding a __must_check annotation to all of these function prototypes. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: make if statements in lpsw/lpswe handlers readableHeiko Carstens
Being unable to parse the 5- and 8-line if statements I had to split them to be able to make any sense of them and verify that they match the architecture. So change the code since I guess that other people will also have a hard time parsing such long conditional statements with line breaks. Introduce a common is_valid_psw() function which does all the checks needed. In case of lpsw (64 bit psw -> 128 bit psw conversion) it will do some not needed additional checks, since a couple of bits can't be set anyway, but that doesn't hurt. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: fix return code handling in lpsw/lpswe handlersHeiko Carstens
kvm_s390_inject_program_int() may return with a non-zero return value, in case of an error (out of memory). Report that to the calling functions instead of ignoring the error case. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: fix psw conversion in lpsw handlerHeiko Carstens
When converting a 64 bit psw to a 128 bit psw the addressing mode bit of the "addr" part of the 64 bit psw must be moved to the basic addressing mode bit of the "mask" part of the 128 bit psw. In addition the addressing mode bit must be cleared when moved to the "addr" part of the 128 bit psw. Otherwise an invalid psw would be generated if the orginal psw was in the 31 bit addressing mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: fix 24 bit psw handling in lpsw/lpswe handlerHeiko Carstens
When checking for validity the lpsw/lpswe handler check that only the lower 20 bits instead of 24 bits have a non-zero value. There handling valid psws as invalid ones. Fix the 24 bit psw mask. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-04-02KVM: s390: Dont do a gmap update on minor memslot changesChristian Borntraeger
Some memslot updates dont affect the gmap implementation, e.g. setting/unsetting dirty tracking. Since a gmap update will cause tlb flushes and segment table invalidations we want to avoid that. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-03-24Merge 'git://github.com/agraf/linux-2.6.git kvm-ppc-next' into queueGleb Natapov
2013-03-22KVM: PPC: Remove unused argument to kvmppc_core_dequeue_externalPaul Mackerras
Currently kvmppc_core_dequeue_external() takes a struct kvm_interrupt * argument and does nothing with it, in any of its implementations. This removes it in order to make things easier for forthcoming in-kernel interrupt controller emulation code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22kvm/ppc/e500: eliminate tlb_refsScott Wood
Commit 523f0e5421c12610527c620b983b443f329e3a32 ("KVM: PPC: E500: Explicitly mark shadow maps invalid") began using E500_TLB_VALID for guest TLB1 entries, and skipping invalidations if it's not set. However, when E500_TLB_VALID was set for such entries, it was on a fake local ref, and so the invalidations never happen. gtlb_privs is documented as being only for guest TLB0, though we already violate that with E500_TLB_BITMAP. Now that we have MMU notifiers, and thus don't need to actually retain a reference to the mapped pages, get rid of tlb_refs, and use gtlb_privs for E500_TLB_VALID in TLB1. Since we can have more than one host TLB entry for a given tlbe_ref, be careful not to clear existing flags that are relevant to other host TLB entries when preparing a new host TLB entry. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22kvm/ppc/e500: g2h_tlb1_map: clear old bit before setting new bitScott Wood
It's possible that we're using the same host TLB1 slot to map (a presumably different portion of) the same guest TLB1 entry. Clear the bit in the map before setting it, so that if the esels are the same the bit will remain set. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22kvm/ppc/e500: h2g_tlb1_rmap: esel 0 is validScott Wood
Add one to esel values in h2g_tlb1_rmap, so that "no mapping" can be distinguished from "esel 0". Note that we're not saved by the fact that host esel 0 is reserved for non-KVM use, because KVM host esel numbering is not the raw host numbering (see to_htlb1_esel). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22KVM: PPC: booke: Added debug handlerBharat Bhushan
Installed debug handler will be used for guest debug support and debug facility emulation features (patches for these features will follow this patch). Signed-off-by: Liu Yu <yu.liu@freescale.com> [bharat.bhushan@freescale.com: Substantial changes] Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22KVM: PPC: Added one_reg interface for timer registersBharat Bhushan
If userspace wants to change some specific bits of TSR (timer status register) then it uses GET/SET_SREGS ioctl interface. So the steps will be: i) user-space will make get ioctl, ii) change TSR in userspace iii) then make set ioctl. It can happen that TSR gets changed by kernel after step i) and before step iii). To avoid this we have added below one_reg ioctls for oring and clearing specific bits in TSR. This patch adds one registerface for: 1) setting specific bit in TSR (timer status register) 2) clearing specific bit in TSR (timer status register) 3) setting/getting the TCR register. There are cases where we want to only change TCR and not TSR. Although we can uses SREGS without KVM_SREGS_E_UPDATE_TSR flag but I think one reg is better. I am open if someone feels we should use SREGS only here. 4) getting/setting TSR register Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22KVM: PPC: move tsr update in a separate functionBharat Bhushan
This is done so that same function can be called from SREGS and ONE_REG interface (follow up patch). Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-21KVM: MMU: Rename kvm_mmu_free_some_pages() to make_mmu_pages_available()Takuya Yoshikawa
The current name "kvm_mmu_free_some_pages" should be used for something that actually frees some shadow pages, as we expect from the name, but what the function is doing is to make some, KVM_MIN_FREE_MMU_PAGES, shadow pages available: it does nothing when there are enough. This patch changes the name to reflect this meaning better; while doing this renaming, the code in the wrapper function is inlined into the main body since the whole function will be inlined into the only caller now. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-03-21KVM: MMU: Move kvm_mmu_free_some_pages() into kvm_mmu_alloc_page()Takuya Yoshikawa
What this function is doing is to ensure that the number of shadow pages does not exceed the maximum limit stored in n_max_mmu_pages: so this is placed at every code path that can reach kvm_mmu_alloc_page(). Although it might have some sense to spread this function in each such code path when it could be called before taking mmu_lock, the rule was changed not to do so. Taking this background into account, this patch moves it into kvm_mmu_alloc_page() and simplifies the code. Note: the unlikely hint in kvm_mmu_free_some_pages() guarantees that the overhead of this function is almost zero except when we actually need to allocate some shadow pages, so we do not need to care about calling it multiple times in one path by doing kvm_mmu_get_page() a few times. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-03-21Merge remote-tracking branch 'upstream/master' into queueMarcelo Tosatti
Merge reason: From: Alexander Graf <agraf@suse.de> "Just recently this really important patch got pulled into Linus' tree for 3.9: commit 1674400aaee5b466c595a8fc310488263ce888c7 Author: Anton Blanchard <anton <at> samba.org> Date: Tue Mar 12 01:51:51 2013 +0000 Without that commit, I can not boot my G5, thus I can't run automated tests on it against my queue. Could you please merge kvm/next against linus/master, so that I can base my trees against that?" * upstream/master: (653 commits) PCI: Use ROM images from firmware only if no other ROM source available sparc: remove unused "config BITS" sparc: delete "if !ULTRA_HAS_POPULATION_COUNT" KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798) KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions (CVE-2013-1797) KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME (CVE-2013-1796) arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED inet: limit length of fragment queue hash table bucket lists qeth: Fix scatter-gather regression qeth: Fix invalid router settings handling qeth: delay feature trace sgy-cts1000: Remove __dev* attributes KVM: x86: fix deadlock in clock-in-progress request handling KVM: allow host header to be included even for !CONFIG_KVM hwmon: (lm75) Fix tcn75 prefix hwmon: (lm75.h) Update header inclusion MAINTAINERS: Remove Mark M. Hoffman xfs: ensure we capture IO errors correctly xfs: fix xfs_iomap_eof_prealloc_initial_size type ... Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-03-20KVM: x86: correctly initialize the CS base on resetPaolo Bonzini
The CS base was initialized to 0 on VMX (wrong, but usually overridden by userspace before starting) or 0xf0000 on SVM. The correct value is 0xffff0000, and VMX is able to emulate it now, so use it. Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-03-20Merge tag 'vfio-v3.9-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson. * tag 'vfio-v3.9-rc4' of git://github.com/awilliam/linux-vfio: vfio: include <linux/slab.h> for kmalloc
2013-03-20Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798) KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions (CVE-2013-1797) KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME (CVE-2013-1796) KVM: x86: fix deadlock in clock-in-progress request handling KVM: allow host header to be included even for !CONFIG_KVM
2013-03-19Merge tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfsLinus Torvalds
Pull XFS fixes from Ben Myers: - Fix for a potential infinite loop which was introduced in commit 4d559a3bcb73 ("xfs: limit speculative prealloc near ENOSPC thresholds") - Fix for the return type of xfs_iomap_eof_prealloc_initial_size from commit a1e16c26660b ("xfs: limit speculative prealloc size on sparse files") - Fix for a failed buffer readahead causing subsequent callers to fail incorrectly * tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfs: xfs: ensure we capture IO errors correctly xfs: fix xfs_iomap_eof_prealloc_initial_size type xfs: fix potential infinite loop in xfs_iomap_prealloc_size()
2013-03-19PCI: Use ROM images from firmware only if no other ROM source availableMatthew Garrett
Mantas Mikulėnas reported that his graphics hardware failed to initialise after commit f9a37be0f02a ("x86: Use PCI setup data"). The aim of this commit was to ensure that ROM images were available on some Apple systems that don't expose the GPU ROM via any other source. In this case, UEFI appears to have provided a broken ROM image that we were using even though there was a perfectly valid ROM available via other sources. The simplest way to handle this seems to be to just re-order pci_map_rom() and leave any firmare-supplied ROM to last. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Tested-by: Mantas Mikulėnas <grawity@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Just some minor fixups, a sunsu console setup panic cure, and recognition of a Fujitsu sun4v cpu." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: remove unused "config BITS" sparc: delete "if !ULTRA_HAS_POPULATION_COUNT" sparc64: correctly recognize SPARC64-X chips sparc,leon: fix GRPCI2 device0 PCI config space access sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option
2013-03-19Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - Fix !SMP build error. - Fix padding computation in struct ucontext (no ABI change). - Minor clean-up after the signal patches (unused var). - Two old Kconfig options clean-up. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED arm64: fix padding computation in struct ucontext arm64: Fix build error with !SMP arm64: Removed unused variable in compat_setup_rt_frame()
generated by cgit v0.10.2 at 2024-11-18 03:32:31 (GMT)