summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-01iwl4965: better skb management in rx pathStanislaw Gruszka
4965 version of Eric patch "iwl3945: better skb management in rx path". It fixes several problems : 1) skb->truesize is underestimated. We really consume PAGE_SIZE bytes for a fragment, not the frame length. 2) 128 bytes of initial headroom is a bit low and forces reallocations. 3) We can avoid consuming a full page for small enough frames. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-01ssb: drop BROKEN from SSB_SFLASHRafał Miłecki
With recent patches ssb can fetch info about serial flash and register it as a platform device. No more reasons to mark it BROKEN. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-01rtlwifi: rtl8192cu: fix function declaration headerMark Schulte
Move rtl92cu_update_hal_rate_tbl declaration to hw.h to correspond with function definition in hw.c. Fixes sparse warning in hw.c warning: symbol 'rtl92cu_update_hal_rate_tbl' was not declared. Signed-off-by: Mark Schulte <schultetwin@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-01mwifiex: populate rates in probe request using cfg80211_scan_requestAvinash Patil
Whenever available, use cfg80211_scan_request to populates rates in outgoing probe request. This will help to advertise band specific rates and fix an issue where 11b rates were advertised in probe request going out on 11a band. This will also ensure that we do not advertise 11b rates while P2P scan is going on. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-01mwifiex: fix adapter pointer dereference issueAmitkumar Karwar
It has introduced by recent commit 6b41f941d7cd: "mwifiex: handle driver initialization error paths" which adds error path handling for mwifiex_fw_dpc(). release_firmware(adapter->*) is called for success as well as failure paths. In failure paths, adapter is already freed at this point. The issue is fixed by moving mwifiex_free_adapter() call. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-01Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-07-26mwifiex: code rearrangement in sdio.cAmitkumar Karwar
Some function definitions are moved to appropriate place to avoid forward declarations. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-26mwifiex: handle driver initialization error pathsAmitkumar Karwar
mwifiex_fw_dpc() asynchronously takes care of firmware download and initialization. Currently the error paths in mwifiex_fw_dpc() are not handled. So if wrong firmware is downloaded, required cleanup work is not performed. memory is leaked and workqueue remains unterminated in this case. mwifiex_terminate_workqueue() is moved to avoid forward declaration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-07-24bgmac: make bgmac depend on bcm47xxHauke Mehrtens
bgmac uses bcm47xx_nvram.h which is only available when BCM47XX was selected. Earlier BCMA_HOST_SOC depended on BCM47XX so this was not build on any other archs, but that changed. We should modify this driver to get access to the nvram or the variables through platform data. This fixes a build problem in linux-next reported by Stephen Rothwell: drivers/net/ethernet/broadcom/bgmac.c:19:27: fatal error: bcm47xx_nvram.h: No such file or directory #include <bcm47xx_nvram.h> ^ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24wireless: rt2x00: rt2800usb: add RT3573 devicesXose Vazquez Perez
taken from Ralink linux and windows drivers: 0x1b75, 0x7733 AirLive 450Mbps Wireless-N Dual Band USB Adapter 0x0b05, 0x17bc ASUS USB-N66 450Mbps Dual Band USB Adapter 0x0b05, 0x17ad ASUS USB-N66 Dual Band N Network Adapter 0x050d, 0x1103 Belkin Wireless Adapter 0x148f, 0xf301 Cameo Ralink3573 3x3 single band USB dongle 0x7392, 0x7733 Edimax 0x0e66, 0x0020 Hawking HD45U Dual Band USB Wireless-N Adapter 0x0e66, 0x0021 Hawking HD45U Dual Band Wls-450N Adapter 0x04bb, 0x094e I-O DATA WN-AG450U Wireless LAN Adapter 0x0789, 0x016b Logitec LAN-W450AN/U2 0x0846, 0x9012 NETGEAR WNDA4100 N900 Wireless Dual Band USB Adapter 0x0846, 0x9019 NETGEAR WNDA4200D Wireless Dual Band USB Adapter 0x2019, 0xed19 Planex GW-USDual450 0x148f, 0x3573 Ralink 802.11n USB Wireless LAN Card 0x0df6, 0x0067 Sitecom Wireless Dualband Network Adapter N750 X6 0x0df6, 0x006a Sitecom Wireless Dualband Network Adapter N900 X7 0x0586, 0x3421 ZyXEL Dual-Band Wireless N450 USB Adapter Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24ath9k: Fix diversity combining for AR9285Sujith Manoharan
When antenna diversity combining is enabled in the EEPROM, the initial values for the MAIN/ALT config have to be programmed correctly. This patch adds it for AR9285. Since the diversity combining macros are common to all chip families, remove the redundant AR9285 macros and move the definitions to phy.h. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: modify mwifiex_ap_sta_limits to advertise support for P2PAvinash Patil
We support maximum simultaneous 2 non-AP station interfaces and they can assume role of Station/P2P client/P2P GO. Advertise this support to cfg80211 so that concurrent P2P/STA operation is possible. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: remove duplicate structure host_cmd_tlvAmitkumar Karwar
We already have 'struct mwifiex_ie_types_header' with same definition. Hence host_cmd_tlv is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: correction in mwifiex_check_fw_status() return statusAmitkumar Karwar
For PCIe cards, when wrong firmware is downloaded, firmware is failed to be ready in 10 seconds. We should return an error at this point. But currently we are sending first command to firmware. As expected firmware doesn't respond to this command and command timeout occurs. This patch fixes the problem by removing unnecessary 'ret' variable modifications in "if (ret) {" block. The block is just supposed to update "adapter->winner" flag. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: replace mdelay with msleepAmitkumar Karwar
It is observed that when wrong firmware is downloaded for PCIe card, system hangs for 10 seconds. The reason is mdelay() is used when firmware status is polled. Replace mdelay with msleep(non-blocking API) to fix the issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: reduce firmware poll retriesAmitkumar Karwar
After downloading the firmware, firmware status is checked by reading a register. Polling interval is 100 msecs. Therefore 100 retries means the status is checked for 10 secs which is more than sufficient for firmware to get ready. This patch removes 1000 retries macro usage, because 100secs time is not practical. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: add unregister_dev handler for usb interfaceAmitkumar Karwar
Clear the data pointer stored in USB interface structure in this handler. This helps to return from mwifiex_usb_disconnect() if driver deinitialization is already performed while handling an error path for mwifiex_usb_probe(). USB8797 card gets enumerated twice. First enumeration is for firmware download and second enumeration expects firmware initialization. mwifiex_usb_probe() always takes care of deinitialization for first enumeration after firmware download. Also, this change matches our handling for SDIO and PCIe interfaces. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: move if_ops.cleanup_if() callAmitkumar Karwar
As if_ops.init_if() is called in mwifiex_register(), corresponding cleanup routine should be called in mwifiex_unregister(). Currently it's there in mwifiex_adapter_cleanup(), hence interface specific cleanup is not performed if driver initialization is failed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: remove unnecessary del_timer(cmd_timer)Amitkumar Karwar
It is already there in mwifiex_unregister(). So unnecessary call in mwifiex_adapter_cleanup() is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: move del_timer_sync(scan_delay_timer) call to fix memleakAmitkumar Karwar
Currently it is in mwifiex_adapter_cleanup() which doesn't get called if driver initialization is failed causing memory leak. scan_delay_timer is initialized in mwifiex_register(), so it should be deleted in mwifiex_unregister(). Hence it has been moved to appropriate place. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: add PCIe shutdown handler to avoid system hang on rebootAmitkumar Karwar
If reboot command is issued when device is in connected state, system hangs while booting. This issue is fixed by doing cleanup in shutdown handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: correct max IE length check for WPS IEAvinash Patil
This patch is bug fix for an invalid boundry check for WPS IE. We should check max IE length against defined macro; instead we were checking it against size of pointer. Fix it. Also move IE length check before allocation of memory. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: support to send deauth for P2P clientStone Piao
During P2P handshake, P2P client needs to send deauth after EAPOL FAILURE to GO. We need add bss mode for P2P client when handle deauth request. Without this change, deauth can not be sent out from P2P client side. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: skip registering mgmt frame that has already registeredStone Piao
Before sending command to firmware, we need to check the frame type. We skip registering the mgmt frame that has already been registered. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: discard deauth and disassoc event during WPS sessionStone Piao
Some GO will send deauth or disassoc packet at the end of WPS handshake, which causes P2P connecion failure due to the race condition between event path and data path. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: add tx info to skb when forming mgmt frameHuawei Yang
In function 'mwifiex_write_data_complete' it need tx info to find the mwifiex_private to updates statistics and wake up tx queues. Or we may trigger tx queues timeout when transmitting lots of mgmt frames. Signed-off-by: Huawei Yang <harvey.huawei.yang@gmail.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: delete AP TX queues when bridged packets reach thresholdAvinash Patil
Delete packets from TX queues for this mwifiex_private structure when bridged packet count reaches maximum threshold. Bridged packets from each RA List are deleted till they fall to low threshold of 128. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: maintain outstanding packet count for RA list instead of packet sizeAvinash Patil
Maintain total outstanding packet count for RA list instead of total outstanding size as packet count metric seems more reasonable for checking threshold etc. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: rename pkt_count to ba_pkt_count in mwifiex_ra_list_tbl structAvinash Patil
pkt_count is used to determine if BA can be formed on this RA list by comparing it with randomly generated BA threshold. The pkt_count variable name here is ambiguous and does not reflect its usage correctly. Rename it to ba_pkt_count. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: remove stop_net_dev_queue operation in AP forwardingHuawei Yang
Under uAP mode mwifiex may stop all net tx queues on forwarding packets. This may stop some tx queues and they never have chance to be waked up. There is also no need to check tx_pending and stop queues here. Because local host has such kind of check when transmitting packets and it's not proper to have forwarding affect local transmitting. Signed-off-by: Huawei Yang <harvey.huawei.yang@gmail.com> Reviewed-by: Avinash Patil <patila@marvell.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24iwl3945: better skb management in rx pathEric Dumazet
Steinar reported reallocations of skb->head with IPv6, leading to a warning in skb_try_coalesce() It turns out iwl3945 has several problems : 1) skb->truesize is underestimated. We really consume PAGE_SIZE bytes for a fragment, not the frame length. 2) 128 bytes of initial headroom is a bit low and forces reallocations. 3) We can avoid consuming a full page for small enough frames. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Stewart <pstew@google.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22wil6210: drop -Werror compiler flagVladimir Kondratiev
In production code, don't use -Werror, as it causes random compilation failures due to compiler version and options used. With every new version of gcc, it becomes stricter and report more warnings. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22MAINTAINERS: update ath6kl git locationKalle Valo
The git tree is in github.com nowadays. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22MAINTAINERS: add ath10kKalle Valo
I forgot to add an entry to MAINTAINERS when submitting the driver. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22wil6210: Enable TCP/UDP checksum HW offloadKirshenbaum Erez
Add support for TCP and UDP HW checksum offloading. RX chain is allways configured for offload mode. In case of checksum error in RX path the DMA L4 error bit(5) will be set to 1 and driver will drop the packet. TX checksum offloading is configrable (ethtool -K). TX descriptors are configured for checksum offload according to the SKB protocol type (TCP/UDP, IPV4/6), Upon mismatch drop the TX packet (checksum required but not TCP/UDP IPV4/6 type). Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22wil6210: fix error path in wil_tx_vringVladimir Kondratiev
Release fragments in the order of allocation; including one for skb head Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22cw1200: Fix incorrect endianness annotation in a header fieldSolomon Peachy
Note that the driver doesn't directly use this field, but it should be correctly defined in any case. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath9k: Release the RF bus after setting board valuesSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath9k: Program correct initvals for FCCSujith Manoharan
* CUS217 specific initvals have to be programmed. * iniAdditional is not used for AR9462/AR9565, remove it. * Handle channel 2484 for regulatory compliance. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath9k: Use correct channel when switching bandsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath9k: Fix FastChannelChange for AR9462/AR9565Sujith Manoharan
Right now, even though these chips support cross-band FCC, the code is non-functional since we bail out early if the channelFlags differ. Fix this so that cross-band FCC works for cards that support this feature. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath9k: Add a HW flag for FCCSujith Manoharan
Fast Channel Change across 2G/5G bands is supported only by AR9462 and AR9565. Add a HW capability field to indicate this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath9k: Move INI overrides to ar9003_hw_override_iniSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22brcmsmac: Further reduce log spam from tx phy messagesJohn Greene
Relegate 2 phy messages to debug status as they create excessive log spam, noted in multiple bugzillas for brcmsmac v3.8 and up. This is a follow on to net-next 99e94940697adec4f84758adb2db71f4a82c7ba5: brcmsmac: Reduce log spam in heavy tx, make err print in debug brcmsmac bcma0:0: phyerr 0x10, rate 0x14 brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10) Signed-off-by: John Greene <jogreene@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22bcma: fix handling of big addrlHauke Mehrtens
The return value of bcma_erom_get_addr_desc() is a unsigned value and it could wrap around in the two complement writing. This happens for one core in the BCM4708 SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22bcma: return correct error code when bus scan failedHauke Mehrtens
It is better to return the actual error code than just -1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22bcma: add constants for new ARM based SoCsHauke Mehrtens
These are the chipIDs of some ARM based SoCs from the BCM47xx line. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22bcma: make it possible to select SoC support without mipsHauke Mehrtens
To make it possible to use the SoC host interface with ARM SoCs do not depend on the MIPS driver any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22bcma: add some more core namesHauke Mehrtens
These cores were found on a BCM4708 (chipid 53010), this is a ARM SoC with two Cortex A9 cores. bcma: bus0: Found chip with id 0xCF12, rev 0x00 and package 0x02 bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0) bcma: bus0: Core 1 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0) bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 6 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) bcma: bus0: Core 8 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0) bcma: bus0: Core 9 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0) bcma: bus0: Core 10 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0) bcma: bus0: Core 11 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0) bcma: bus0: Core 12 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0) bcma: bus0: Core 13 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0) bcma: bus0: Core 14 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0) bcma: bus0: Core 15 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0) bcma: bus0: Core 16 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-11-08 19:45:19 (GMT)