summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-06ARM: 6103/1: nomadik: define clocks staticallyRabin Vincent
Add a table for clocks to be defined statically, so that new clocks can be added without having to call nmdk_clk_create() for each of them. Remove the now unused nmdk_clk_create() function. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-06ARM: 6102/1: nomadik-gpio: set a default trigger for interruptsRabin Vincent
Set a default trigger type for interrupts, otherwise if request_irq is called without specifiying a trigger type, the interrupt will not actually be enabled. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-06ARM: 6101/1: nomadik-gpio: don't enable in set_typeRabin Vincent
On this peripheral, setting the trigger type enables the interrupt, and the current set_type() implementation unconditionally enables the interrupt, even if it is called when the interrupt is disabled. Fix set_type() to: - if the interrupt is disabled, defer the actual trigger setting to when it is unmasked - if the interrupt is enabled, change the type immediately by clearing the old type and then re-enabling with the new type. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-06ARM: 6100/1: nomadik-gpio: factor out helper to enable/disable irqsRabin Vincent
Remove some nearly-duplicated code to make the following patch simpler. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-06ARM: 6099/1: nomadik-gpio: fix mask/unmaskRabin Vincent
Mask/unmask should modify the interrupt mask register (RIMSC and FIMSC) not the wakeup mask registers (RWIMSC and FWIMSC). Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6090/1: ux500: add U5500 supportRabin Vincent
Add basic support for the U5500 platform. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6089/1: ux500: rename cpu-u8500.c to cpu-db8500.cRabin Vincent
Move the DB8500-specific file to a more appropriate name. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6088/1: ux500: use UX500_* macros instead of U8500_*Rabin Vincent
So that the correct addresses get used on U5500. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6087/1: ux500: move sys_timer to cpu.cRabin Vincent
Move the common system timer setup code to cpu.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6086/1: ux500: move gpio devices to devices-db8500.cRabin Vincent
The GPIO layout is different on DB5500, so move the current one to devices-db8500.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6085/1: ux500: reorganize i2c devicesRabin Vincent
Move common i2c devices to devices.c and DB8500-specific I2C devices to devices-db8500.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6084/1: ux500: move UART devices to devices.cRabin Vincent
The three PL011 UARTs are common among Ux500 SoCs, so move them to devices.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6083/1: ux500: put DB8500-specific devices in devices-db8500.cRabin Vincent
Add devices-db8500.c for DB8500-specific devices, starting with SSP0. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6082/1: ux500: put common devices into devices.cRabin Vincent
Introduce devices.c, for placing devices common among Ux500 SoCs. Start with the PL031 device. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6081/1: ux500: move gpio macros to common headerRabin Vincent
Move GPIO macros to a common header, and allow them to use the correct macros for the appropriate SoC, and be named accordingly. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6080/1: ux500: move irq and common maps to cpu.cRabin Vincent
Move IRQ initialization and common io mapping setup code to cpu.c, renaming U8500* to UX500* along the way. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6079/1: ux500: allow choice of the DEBUG_LL UARTRabin Vincent
Allow the UART used for DEBUG_LL to be selected. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6078/1: ux500: add per-SoC register definitionsRabin Vincent
Split up all the hardware register definitions previously found in hardware.h into per-SoC files db8500-regs.h and db5500-regs.h. Rename a couple of macros to prepare for sharing code between the variants. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6077/1: ux500: add SOC Kconfig variablesRabin Vincent
This adds the different config options for SoCs DB8500 and DB5500 and refines the SoC/CPU detection code to support the DB5500 as well via these. The selection between DB5500 and DB8500 is currently a simple compile-time choice. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 6034/1: ARM: U300: set f_max to 24 MHz for MMCILinus Walleij
This employs the frequency setting mechanism introduced to the MMCI to specify that this system can actually be clocked at 24 MHz. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 6033/1: ARM: MMCI: pass max frequency from platformLinus Walleij
This introduce the field f_max into the mmci_platform_data, making it possible to pass in a desired block clocking frequency from a board configuration. This is often more desirable than using a module parameter. We keep the module parameter as a fallback as well as the default frequency specified for this parameter if a parameter is not provided. This also adds some kerneldoc style documentation to the platform data struct in mmci.h. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 6032/1: ARM: MMCI: support 8bit mode on the ST Micro versionLinus Walleij
This adds support for an 8bit wide bus to the card (data lines MCIDAT0 through 7 exist) on the ST Micro version and alters the U300 platform to support this. Also add some ST_ prefix to the ST-specific registers. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14ARM: 6027/1: ux500: enable l2x0 supportSrinidhi Kasagar
This enables the l2x0 support and ensures that the secondary CPU can see the page table and secondary data at this point. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5978/1: plat-nomadik: use one-shot clock eventsAlessandro Rubini
This is a complete rewrite of the MTU driver, using one-shot for events and a free-running timer for stamping. It allows CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS to work on Nomadik and Ux500. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5973/1: ux500: add gpio supportRabin Vincent
Add support for the GPIOs on the U8500, using the plat-nomadik GPIO driver. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5964/1: ux500: support clock gatingRabin Vincent
Implement clock gating support for the u8500 clocks. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5963/1: ux500: add support for u8500 v1 revisionRabin Vincent
Add cpu_is_u8500{ed/v1}() functions to determine the variant based on the CPU id, add the changed peripheral addresses, and fixup the MTU address. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5962/1: ux500: move system timer to cpu fileRabin Vincent
There is nothing board-specific about the system timer, so move it to the CPU file. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5972/1: nomadik-gpio: convert to platform driverRabin Vincent
On the U8500 platform there are four GPIO blocks, each with a 4K address space, including the peripheral identification. However, each of these blocks have a varying number of banks, each of which have 32 GPIOs and an interrupt line. The current nomadik-gpio driver implementation can handle each of these sub-banks easily with one instance each, but cannot as-is be hooked up to them because it is an AMBA driver and it expects to see a peripheral with the appropriate peripheral ids but having only one bank and only one interrupt. Solve this by converting the driver to a platform driver. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5971/1: nomadik-gpio: mask/ack/unmask the parent irqRabin Vincent
Since we register as a chained handler, we need to take care of acking the parent irq. Current code had the acking disabled because just acking the interrupt disables it on some interrupt controllers (like the VIC used on Nomadik). However, not acking at all is incorrect because interrupt controllers like the GIC need an EOI indication, which is done in the ack routine. Solve this by maskacking and unmasking it appropriately, similar to how handle_level_irq operates. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5970/1: nomadik-gpio: fix spinlock usageRabin Vincent
Fix the incorrect spinlock usage which leads to these compiler warnings: arch/arm/plat-nomadik/gpio.c:60: warning: passing argument 1 of `spinlock_check' from incompatible pointer type arch/arm/plat-nomadik/gpio.c:69: warning: passing argument 1 of `spin_unlock_irqrestore' from incompatible pointer type Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5969/1: nomadik: move gpio to plat-nomadikRabin Vincent
Move the Nomadik GPIO driver to plat-nomadik so that it can also be used on the Ux500 platform. The mach-nomadik include/mach/gpio.h is replaced by one that includes the one now in plat-nomadik, so that code doesn't need to include the one in plat specifically, and can instead use <linux/gpio.h> as usual. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (96 commits) Blackfin: stop cleaning include/asm/asm-offsets.h Blackfin: scale calibration when cpu freq changes Blackfin: eat spurious space in asm/dpmc.h Blackfin: fix anomaly 283 handling with exact hardware error Blackfin: bf537-stamp: add example ADXL346 orientation resources Blackfin: bf537-stamp: add example AD2S1210 IIO resources Blackfin: don't support keypad wakeup from hibernate Blackfin: bf537-stamp: add example AD7416 IIO resources Blackfin: bf537-stamp: add example ADP8860 backlight/led resources Blackfin: bf537-stamp: add example AD7414 temp sensor resources Blackfin: rename AD1836 to AD183X in board files Blackfin: bf537-stamp: add example AD2S120x resources Blackfin: add support for the on-chip MAC status interrupts Blackfin: asm/page.h: pull in asm-generic headers Blackfin: mark gpio lib functions static Blackfin: bf537-stamp: add example ADAU1361 resources Blackfin: GPIO: implement to_irq handler Blackfin: bf537-stamp: add example ADP122/ADP150 power regulator resources Blackfin: bf537-stamp: add example AD2S90 resources Blackfin: bf537-stamp: add example AD5398 power regulator resources ...
2010-03-19Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: Build fix for mpc52xx watchdog timer code of: Fix comparison of "compatible" properties powerpc/52xx: update defconfigs spi/omap2_mcspi: Use transaction speed if provided spi/omap2_mcspi: fix NULL pointer dereference uartlite: Fix build on sparc.
2010-03-18Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: ARM/OMAP: Remove the +x bit from a couple of source files omap: McBSP: Drop unnecessary status/error bit clearing on reg_cacheretrieved register values OMAP4: fix temporary hacks that break multi-omap PM OMAP2: cpu_is_omap2*: fix compile-time removal of unused code omap3: pandora: add missing i2c3 board_info omap: mach-omap2/io.c: fix function declarations omap: Fix gpio_resume_after_retention omap3: Fix support for the LEDs connected to GPIO outputs on IGEP v2board omap: Checkpatch cleanup for blizzard.h omap: pass the reboot command to the boot loader omap2/3/4: mailbox: remove compiler warning OMAP2: serial.c: Fix number of uarts in early_init omap: Enable PM_RUNTIME in defconfigs to avoid USB compile errors omap2: Update n8x0 defconfig to test multi-omap and DMA api changes omap2: add USB initialization for tusb6010 omap4: Fix build break by moving omap_smc1 into a separate .S omap2/3/4: ehci: avoid compiler error with touchbook omap3: Fix compile for Touch Book early_param
2010-03-18Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits) ARM: Fix RiscPC decompressor build errors ARM: Fix sorting of platform group config options and includes ARM: 5991/1: Fix regression in restore_user_regs macro ARM: 5989/1: ARM: KGDB: add support for SMP platforms ARM: 5990/1: ARM: use __armv5tej_mmu_cache_flush for V5TEJ instead of __armv4_mmu_cache_flush ARM: Add final piece to fix XIP decompressor in read-only memory video: enable sh_mobile_lcdc on SH-Mobile ARM ARM: mach-shmobile: ap4evb SDHI0 platform data V2 ARM: mach-shmobile: sh7372 SDHI vector merge ARM: mach-shmobile: sh7377 SDHI vector merge ARM: mach-shmobile: sh7367 SDHI vector merge ARM: mach-shmobile: G4EVM KEYSC platform data mtd: enable sh_flctl on SH-Mobile ARM ARM: mach-shmobile: G3EVM FLCTL platform data ARM: mach-shmobile: G3EVM KEYSC platform data Video: ARM CLCD: Better fix for swapped IENB and CNTL registers ARM: Add L2 cache handling to smp boot support ARM: 5960/1: ARM: perf-events: fix v7 event selection mask ARM: 5959/1: ARM: perf-events: request PMU interrupts with IRQF_NOBALANCING ARM: 5988/1: pgprot_dmacoherent() for non-mmu builds ...
2010-03-18Merge branch 'for-linus/samsung-fixes' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/samsung-fixes' of git://git.fluff.org/bjdooks/linux: ARM: SAMSUNG: Fixup commit 4e6d488af37980d224cbf298224db6173673f362 ARM: SAMSUNG: Fix build error from stale define in <plat/uncompress.h> ARM: SAMSUNG: Add suspend/resume support for S3C PWM driver ARM: S3C2440: Fix s3c2440 cpufreq compilation post move.
2010-03-18Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (27 commits) microblaze: entry.S use delay slot for return handlers microblaze: Save current task directly microblaze: Simplify entry.S - save/restore r3/r4 - ret_from_trap microblaze: PCI early support for noMMU system microblaze: Fix dma alloc and free coherent dma functions microblaze: Add consistent code microblaze: pgtable.h: move consistent functions microblaze: Remove ancient Kconfig option for consistent mapping microblaze: Remove VMALLOC_VMADDR microblaze: Add define for ASM_LOOP microblaze: Preliminary support for dma drivers microblaze: remove trailing space in messages microblaze: Use generic show_mem() microblaze: Change temp register for cmdline microblaze: Preliminary support for dma drivers microblaze: Move cache function to cache.c microblaze: Add support from PREEMPT microblaze: Add support for Xilinx PCI host bridge microblaze: Enable PCI, missing files microblaze: Add core PCI files ...
2010-03-18Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: deal with merge_bvec_fn in component devices better.
2010-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (69 commits) [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vport [SCSI] bfa: Update the driver version to 2.1.2.1. [SCSI] bfa: Remove unused header files and did some cleanup. [SCSI] bfa: Handle SCSI IO underrun case. [SCSI] bfa: FCS and include file changes. [SCSI] bfa: Modified the portstats get/clear logic [SCSI] bfa: Replace bfa_get_attr() with specific APIs [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO). [SCSI] bfa: Rename pport to fcport in BFA FCS. [SCSI] bfa: IOC fixes, check for IOC down condition. [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state. [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt. [SCSI] bfa: IOC recovery fix in fcmode. [SCSI] bfa: AEN and byte alignment fixes. [SCSI] bfa: Introduce a link notification state machine. [SCSI] bfa: Added firmware save clear feature for BFA driver. [SCSI] bfa: FCS authentication related changes. [SCSI] bfa: PCI VPD, FIP and include file changes. [SCSI] bfa: Fix to copy fpma MAC when requested by user space application. [SCSI] bfa: RPORT state machine: direct attach mode fix. ...
2010-03-18Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (35 commits) perf: Fix unexported generic perf_arch_fetch_caller_regs perf record: Don't try to find buildids in a zero sized file perf: export perf_trace_regs and perf_arch_fetch_caller_regs perf, x86: Fix hw_perf_enable() event assignment perf, ppc: Fix compile error due to new cpu notifiers perf: Make the install relative to DESTDIR if specified kprobes: Calculate the index correctly when freeing the out-of-line execution slot perf tools: Fix sparse CPU numbering related bugs perf_event: Fix oops triggered by cpu offline/online perf: Drop the obsolete profile naming for trace events perf: Take a hot regs snapshot for trace events perf: Introduce new perf_fetch_caller_regs() for hot regs snapshot perf/x86-64: Use frame pointer to walk on irq and process stacks lockdep: Move lock events under lockdep recursion protection perf report: Print the map table just after samples for which no map was found perf report: Add multiple event support perf session: Change perf_session post processing functions to take histogram tree perf session: Add storage for seperating event types in report perf session: Change add_hist_entry to take the tree root instead of session perf record: Add ID and to recorded event data when recording multiple events ...
2010-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: avoid '\0' in hid debugfs events file HID: Add RGT Clutch Wheel clutch device id HID: ntrig: fix touch events HID: add quirk for UC-Logik WP4030 tablet HID: magicmouse: fix oops after device removal
2010-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (30 commits) Btrfs: fix the inode ref searches done by btrfs_search_path_in_tree Btrfs: allow treeid==0 in the inode lookup ioctl Btrfs: return keys for large items to the search ioctl Btrfs: fix key checks and advance in the search ioctl Btrfs: buffer results in the space_info ioctl Btrfs: use __u64 types in ioctl.h Btrfs: fix search_ioctl key advance Btrfs: fix gfp flags masking in the compression code Btrfs: don't look at bio flags after submit_bio btrfs: using btrfs_stack_device_id() get devid btrfs: use memparse Btrfs: add a "df" ioctl for btrfs Btrfs: cache the extent state everywhere we possibly can V2 Btrfs: cache ordered extent when completing io Btrfs: cache extent state in find_delalloc_range Btrfs: change the ordered tree to use a spinlock instead of a mutex Btrfs: finish read pages in the order they are submitted btrfs: fix btrfs_mkdir goto for no free objectids Btrfs: flush data on snapshot creation Btrfs: make df be a little bit more understandable ...
2010-03-18Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: ensure bdi_unregister is called on mount failure. NFS: Avoid a deadlock in nfs_release_page NFSv4: Don't ignore the NFS_INO_REVAL_FORCED flag in nfs_revalidate_inode() nfs4: Make the v4 callback service hidden nfs: fix unlikely memory leak rpc client can not deal with ENOSOCK, so translate it into ENOCONN
2010-03-18Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: pp->active_link is not reliable when FBS is enabled ahci: use BIOS date in broken_suspend list ahci: add missing nv IDs
2010-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: sequencer: clean up remove bogus check ALSA: hda: Use LPIB and 6stack-dig for eMachines T5212 ALSA: hda - Disable MSI for Nvidia controller ALSA: hda - Add PCI quirks for MSI NetOn AP1900 and Wind Top AE2220 ALSA: hda - Fix secondary ADC of ALC260 basic model ALSA: hda - Add an error message for invalid mapping NID ALSA: hda - New Intel HDA controller
2010-03-18Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: panasonic-laptop - Fix incomplete registration failure handling backlight: msi-laptop, msi-wmi: fix incomplete registration failure handling backlight: blackfin - Fix missing registration failure handling backlight: classmate-laptop - Fix missing registration failure handling backlight: mbp_nvidia_bl - add five more MacBook variants backlight: Allow properties to be passed at registration backlight: Add backlight_device parameter to check_fb video: backlight/progear, fix pci device refcounting backlight: l4f00242t03: Fix module licence absence. backlight: Revert some const qualifiers backlight: Add Epson L4F00242T03 LCD driver
2010-03-18Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Fix race between LED device uevent and actual attributes creation leds-gpio: fix default state handling on OF platforms leds: Add Dell Business Class Netbook LED driver leds: Kconfig cleanup leds: led-class.c - Quiet boot messages leds: make PCI device id constant leds: ALIX2: Add dependency to !GPIO_CS5335
2010-03-18Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: don't warn about page discards on shutdown xfs: use scalable vmap API xfs: remove old vmap cache
2010-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (39 commits) gigaset: fix build failure bridge: Make first arg to deliver_clone const. bridge br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only without IGMP snooping. route: Fix caught BUG_ON during rt_secret_rebuild_oneshot() bridge br_multicast: Fix skb leakage in error path. bridge br_multicast: Fix handling of Max Response Code in IGMPv3 message. NET: netpoll, fix potential NULL ptr dereference tipc: fix lockdep warning on address assignment l2tp: Fix UDP socket reference count bugs in the pppol2tp driver smsc95xx: wait for PHY to complete reset during init l2tp: Fix oops in pppol2tp_xmit smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver ne: Do not use slashes in irq name string NET: ksz884x, fix lock imbalance gigaset: correct range checking off by one error bridge: Fix br_forward crash in promiscuous mode bridge: Move NULL mdb check into br_mdb_ip_get ISDN: Add PCI ID for HFC-2S/4S Beronet Card PCIe net-2.6 [Bug-Fix][dccp]: fix oops caused after failed initialisation myri: remove dead code ...
generated by cgit v0.10.2 at 2024-09-19 19:12:58 (GMT)