summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-28caif: Rename functions in cfcnfg and caif_devSjur Braendeland
Changes: o Renamed cfcnfg_del_adapt_layer to cfcnfg_disconn_adapt_layer o Fixed typo cfcfg to cfcnfg o Renamed linkid to channel_id o Updated documentation in caif_dev.h o Minor formatting changes Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28caif: Ldisc add permission check and mem-alloc error checkSjur Braendeland
Changes: o Added permission checks for installing. CAP_SYS_ADMIN and CAP_SYS_TTY_CONFIG can install the ldisc. o Check if allocation of skb was successful. Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Create multiple TX queuesBen Hutchings
Create a core TX queue and 2 hardware TX queues for each channel. If separate_tx_channels is set, create equal numbers of RX and TX channels instead. Rewrite the channel and queue iteration macros accordingly. Eliminate efx_channel::used_flags as redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Test only the first pair of TX queuesBen Hutchings
This makes no immediate difference, but we definitely do not want to test all TX queues once we allocate a pair of TX queues to each channel. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Add Siena PHY BIST and cable diagnostic supportSteve Hodgson
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Clean up efx_nic::irq_zero_countBen Hutchings
There is no need for this to be unsigned long; make it unsigned int. It does need a line in kernel-doc, so add that. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Add necessary parentheses to macro definitions in net_driver.hBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Break NAPI processing after one ring-full of TX completionsBen Hutchings
Currently TX completions do not count towards the NAPI budget. This means a continuous stream of TX completions can cause the polling function to loop indefinitely with scheduling disabled. To avoid this, follow the common practice of reporting the budget spent after processing one ring-full of TX completions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Set PERIODIC_NOEVENT flag for MC_CMD_MAC_STATSSteve Hodgson
When set, an event is not sent whenever periodic MAC statistics are raised. This avoids unnecessary wake-ups. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Update MCDI protocol definitionsBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Enable IPv6 RSS using random key for Toeplitz hashBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Read MEM_STAT for SRM_PERR as well as MEM_PERR errorsSteve Hodgson
Parity errors in different blocks of SRAM may set one of two different interrupt flags. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Log specific message for failure of NVRAM self-testBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Extend the legacy interrupt workaroundsSteve Hodgson
Siena has two problems with legacy interrupts: 1. There is no synchronisation between the ISR read completion, and the interrupt deassert message. 2. A downstream read at the "wrong" moment can return 0, and suppress generating the next interrupt. Falcon should suffer from both of these, and it appears it does. Enable EFX_WORKAROUND_15783 on Falcon as well. Also, when we see queues == 0, ensure we always schedule or rearm every event queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Reconfigure the XAUI serdes after an EM resetSteve Hodgson
Fix a regression introduced in d3245b28ef2a45ec4e115062a38100bd06229289 "sfc: Refactor link configuration". Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Stop masking out XGMII faults over reconfiguresSteve Hodgson
The aim of this code was to avoid a spurious XGMII fault over a MAC reconfigure. It's less relevant now that the PHY reconfigure isn't called from the MAC reconfigure. After applying this patch, our link stress test passed 48 hours of testing without ever resetting the PHY. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Handle serious errors in exactly one interrupt handlerSteve Hodgson
'Fatal' errors set an interrupt flag associated with a specific event queue; only read the syndrome vector if we see that queue's flag set (legacy interrupts) or in the interrupt handler for that queue (MSI). Do not ignore an interrupt if the fatal error flag is set but specific error flags are all zero. Even if we don't schedule a reset, we must respect the queue mask and rearm the appropriate event queues. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Consistently report short MCDI responses as EIOBen Hutchings
In some cases failing functions were returning 0 which is obviously wrong. In other cases they were returning inappropriate error codes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Ignore parity errors in the other port's SRAMSteve Hodgson
Siena has a separate SRAM bank for each port. On single-port boards these can be merged together, so each port has an interrupt flag for parity errors in the other port's SRAM. Currently we do not enable such merging and should mask this interrupt source. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sky2: use the DMA state API instead of the pci equivalentsFUJITA Tomonori
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28bnx2x: Remove two prefetch()Eric Dumazet
1) Even on 64bit arches, sizeof(struct sk_buff) < 256 2) No need to prefetch same pointer twice. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Acked-by: Eliezer Tamir <eliezer@tamir.org.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28ixgbe: disable MSI-X by default on certain Cisco adaptersNicholas Nunley
Due to an errata in 82598 parts MSI-X needs to be disabled in certain ixgbe devices designed to transfer peer-to-peer traffic on the PCIe bus. This patch sets the default interrupt type to MSI rather than MSI-X for specific Cisco ixgbe adapters. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Acked-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28bridge: multicast_flood cleanupstephen hemminger
Move some declarations around to make it clearer which variables are being used inside loop. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28bridge: multicast port group RCU fixstephen hemminger
The recently introduced bridge mulitcast port group list was only partially using RCU correctly. It was missing rcu_dereference() and missing the necessary barrier on deletion. The code should have used one of the standard list methods (list or hlist) instead of open coding a RCU based link list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28bridge: multicast floodstephen hemminger
Fix unsafe usage of RCU. Would never work on Alpha SMP because of lack of rcu_dereference() Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28bridge: simplify multicast_add_routerstephen hemminger
By coding slightly differently, there are only two cases to deal with: add at head and add after previous entry. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28ixgbe: add registers etc. printout code just before resetting adaptersTaku Izumi
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28igb: add registers etc. printout code just before resetting adaptersTaku Izumi
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28e1000e: add registers etc. printout code just before resetting adaptersTaku Izumi
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28e1000: Use netdev_<level>, pr_<level> and dev_<level>Emil Tantilov
This patch is an alternative to similar patch provided by Joe Perches. Substitute DPRINTK macro for e_<level> that uses netdev_<level> and dev_<level> similar to e1000e. - Convert printk to pr_<level> where applicable. - Use common #define pr_fmt for the driver. - Use dev_<level> for displaying text in parts of the driver where the interface name is not assigned (like e1000_param.c). - Better align test with the new macros. CC: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27Revert "bridge: Use hlist_for_each_entry_rcu() in br_multicast_add_router()"David S. Miller
This reverts commit ff65e8275f6c96a5eda57493bd84c4555decf7b3. As explained by Stephen Hemminger, the traversal doesn't require RCU handling as we hold a lock. The list addition et al. calls, on the other hand, do. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbevf: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgb: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igbvf: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igb: convert igb from using PCI DMA functions to using DMA API functionsAlexander Duyck
This patch makes it so that igb now uses the DMA API functions instead of the PCI API functions. To do this the pci_dev pointer that was in the rings has been replaced with a device pointer, and as a result all references to [tr]x_ring->pdev have been replaced with [tr]x_ring->dev. This patch is based of of work originally done by Nicholas Nunley. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bridge: Use hlist_for_each_entry_rcu() in br_multicast_add_router()David S. Miller
Noticed by Michał Mirosław. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb4: set skb->rxhashDimitris Michailidis
Implement the ->set_flags ethtool method to control NETIF_F_RXHASH and set skb->rxhash to the HW calculated hash accordingly. Follow Eric Dumazet's suggestion and use the hash value raw. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net/sb1250: setup the pdevice within the soc codeSebastian Andrzej Siewior
doing it within the driver does not look good. And surely isn't how platform devices were meat to be used. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net/sb1250: remove CONFIG_SIBYTE_STANDALONESebastian Andrzej Siewior
CONFIG_SIBYTE_STANDALONE is gone since v2.6.31-rc1 ("MIPS: Sibyte: Remove standalone kernel support") This is a missing piece. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net: disallow to use net_assign_generic externallyJiri Pirko
Now there's no need to use this fuction directly because it's handled by register_pernet_device. So to make this simple and easy to understand, make this static to do not tempt potentional users. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb4: increase serial number lengthDimitris Michailidis
Some boards have longer serial numbers in their VPD, up to 24 bytes. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb4: parse the VPD instead of relying on a static VPD layoutDimitris Michailidis
Some boards' VPDs contain additional keywords or have longer serial numbers, meaning the keyword locations are variable. Ditch the static layout and use the pci_vpd_* family of functions to parse the VPD instead. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net: sk_add_backlog() take rmem_alloc into accountEric Dumazet
Current socket backlog limit is not enough to really stop DDOS attacks, because user thread spend many time to process a full backlog each round, and user might crazy spin on socket lock. We should add backlog size and receive_queue size (aka rmem_alloc) to pace writers, and let user run without being slow down too much. Introduce a sk_rcvqueues_full() helper, to avoid taking socket lock in stress situations. Under huge stress from a multiqueue/RPS enabled NIC, a single flow udp receiver can now process ~200.000 pps (instead of ~100 pps before the patch) on a 8 core machine. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net: batch skb dequeueing from softnet input_pkt_queueChangli Gao
batch skb dequeueing from softnet input_pkt_queue to reduce potential lock contention when RPS is enabled. Note: in the worst case, the number of packets in a softnet_data may be double of netdev_max_backlog. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net: Make RFS socket operations not be inet specific.David S. Miller
Idea from Eric Dumazet. As for placement inside of struct sock, I tried to choose a place that otherwise has a 32-bit hole on 64-bit systems. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2010-04-27ixgbe: Properly display 1 gig downshift warning for backplaneAnjali Singhai
Description: When using Intel smartspeed, the patch displays a warning when the link down shifts to 1 Gig. Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: cleanup ethtool autoneg inputDon Skidmore
The way we were setting autoneg via ethtool was inconstant with that of our other drivers. It will change the following: If autoneg is off: >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: off RX: off TX: off Before: >ethtool -A eth0 autoneg on >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: off RX: off TX: off Now: >ethtool -A eth0 autoneg on >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: on RX: on TX: on Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-07-06 11:58:55 (GMT)