summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-04ceph: no .snap inside of snapped namespaceSage Weil
Otherwise you can do things like # mkdir .snap/foo # cd .snap/foo/.snap # ls <badness> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04libceph: fix msgr standby handlingSage Weil
The standby logic used to be pretty dependent on the work requeueing behavior that changed when we switched to WQ_NON_REENTRANT. It was also very fragile. Restructure things so that: - We clear WRITE_PENDING when we set STANDBY. This ensures we will requeue work when we wake up later. - con_work backs off if STANDBY is set. There is nothing to do if we are in standby. - clear_standby() helper is called by both con_send() and con_keepalive(), the two actions that can wake us up again. Move the connect_seq++ logic here. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04libceph: fix msgr keepalive flagSage Weil
There was some broken keepalive code using a dead variable. Shift to using the proper bit flag. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04libceph: fix msgr backoffSage Weil
With commit f363e45f we replaced a bunch of hacky workqueue mutual exclusion logic with the WQ_NON_REENTRANT flag. One pieces of fallout is that the exponential backoff breaks in certain cases: * con_work attempts to connect. * we get an immediate failure, and the socket state change handler queues immediate work. * con_work calls con_fault, we decide to back off, but can't queue delayed work. In this case, we add a BACKOFF bit to make con_work reschedule delayed work next time it runs (which should be immediately). Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04MAINTAINERS: Update shaggy's email addressDave Kleikamp
Signed-off-by: Dave Kleikamp <shaggy@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04Mark ptrace_{traceme,attach,detach} staticLinus Torvalds
They are only used inside kernel/ptrace.c, and have been for a long time. We don't want to go back to the bad-old-days when architectures did things on their own, so make them static and private. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410Mark Brown
The debugfs support added to the regulator API (which has been merged in during this merge window) creates directories for regulators named after the display names for the regulators so replace / as a separator for multiple supplies with + in the SMDK6410 machine. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410Mark Brown
Avoid relying on implicit inclusion of machine.h Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Reduce output of s3c64xx_dma_init1()Ben Dooks
Reduce the logging output of s3c64xx_dma_init1() as it is not useful for normal bootup (and we get an overall indication of the registration of the PL180 DMA block). This removes the following output from the log: s3c64xx_dma_init1: registering DMA 0 (e0808100) s3c64xx_dma_init1: registering DMA 1 (e0808120) s3c64xx_dma_init1: registering DMA 2 (e0808140) s3c64xx_dma_init1: registering DMA 3 (e0808160) s3c64xx_dma_init1: registering DMA 4 (e0808180) s3c64xx_dma_init1: registering DMA 5 (e08081a0) s3c64xx_dma_init1: registering DMA 6 (e08081c0) s3c64xx_dma_init1: registering DMA 7 (e08081e0) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Tone down SDHCI debuggingMark Brown
The MMC core calls s3c6400_setup_sdhcp_cfg_card() very frequently, causing the log message in there at KERN_INFO to be displayed a lot which is slow and overly chatty. Convert the message into a pr_debug() to tone this down. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Add clock for i2c1Ben Dooks
The clock for i2c1 has been missing for a while, add it to the list of clocks for the system and ensure it is initialised at startup. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Staticise non-exported GPIO to interrupt functionsMark Brown
No need to put these in the global namespace and sparse gets upset. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devicesMark Brown
Ensures that the declaration agrees with the definition and makes sparse happy. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Fix keypad setup to configure correct number of rowsBen Dooks
The call to s3c_gpio_cfgrange_nopull() takes a size and base but this looks like it is trying to do base and end. This means it is configuring too many GPIOs and on the case of the Cragganmore means we're seeing an overflow of the ROW pins causing problems with the keyboard driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02Lars-Peter Clausen
The gta02 header file still uses the old S3C2410_GPJx defines instead of the S3C2410_GPJ(x) macro. Since the S3C2410_GPJx defines have already been removed this causes the following build failure: sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_set_spk': sound/soc/samsung/neo1973_wm8753.c:259: error: 'S3C2440_GPJ2' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c:259: error: (Each undeclared identifier is reported only once sound/soc/samsung/neo1973_wm8753.c:259: error: for each function it appears in.) sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_get_spk': sound/soc/samsung/neo1973_wm8753.c:267: error: 'S3C2440_GPJ2' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_event': sound/soc/samsung/neo1973_wm8753.c:276: error: 'S3C2440_GPJ1' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c: At top level: sound/soc/samsung/neo1973_wm8753.c:439: error: 'S3C2440_GPJ2' undeclared here (not in a function) sound/soc/samsung/neo1973_wm8753.c:440: error: 'S3C2440_GPJ1' undeclared here (not in a function) This patches fixes the issue by doing a s,S3C2410_GPJ([\d]+),S3C2410_GPJ(\1),g on the file. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S5P64X0: Fix number of GPIO lines in Bank FBanajit Goswami
This patch modifies the number of total GPIO lines for Bank F for Samsung S5P6440 and S5P6450 SoCs from 2 to 16. This is necessary as the GPIO lines from 0 to 13 are reserved and only lines 14 and 15 are used. As during initialization, the line number starts at 0, putting 2 does not solve the intended purpose. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C2440: Select missing S3C_DEV_USB_HOST on GTA02Lars-Peter Clausen
The gta02 mach file references the ohci device. So we need to select S3C_DEV_USB_HOST to have the device available. This fixes the following linker errors: arch/arm/mach-s3c2440/built-in.o: In function 'gta02_machine_init': mach-gta02.c:(.init.text+0x370): undefined reference to 's3c_ohci_set_platdata' arch/arm/mach-s3c2440/built-in.o:(.init.data+0xac): undefined reference to 's3c_device_ohci' Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04Blackfin: iflush: update anomaly 05000491 workaroundMike Frysinger
Recent feedback from design says we need three NOPs in the hardware loop. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-04Blackfin: outs[lwb]: make sure count is greater than 0Mike Frysinger
Some devices will use the outs* funcs with a length of zero, so make sure we do not write any data in that case. Reported-by: Gilbert Inho <gneny@edevice.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-04ARM: mach-shmobile: mackerel: modify LCDC clock divider valueKuninori Morimoto
mackerel WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: Makoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-04ARM: mach-shmobile: ap4evb: modify LCDC clock divider valueKuninori Morimoto
ap4evb WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: Makoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-04drm/nouveau: allocate kernel's notifier object at end of blockBen Skeggs
The nv30/nv40 3d driver is about to start using DMA_FENCE from the 3D object which, it turns out, doesn't like its DMA object to not be aligned to a 4KiB boundary. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: DNS: Fix a NULL pointer deref when trying to read an error key [CVE-2011-1076]
2011-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) MAINTAINERS: Add Andy Gospodarek as co-maintainer. r8169: disable ASPM RxRPC: Fix v1 keys AF_RXRPC: Handle receiving ACKALL packets cnic: Fix lost interrupt on bnx2x cnic: Prevent status block race conditions with hardware net: dcbnl: check correct ops in dcbnl_ieee_set() e1000e: disable broken PHY wakeup for ICH10 LOMs, use MAC wakeup instead igb: fix sparse warning e1000: fix sparse warning netfilter: nf_log: avoid oops in (un)bind with invalid nfproto values dccp: fix oops on Reset after close ipvs: fix dst_lock locking on dest update davinci_emac: Add Carrier Link OK check in Davinci RX Handler bnx2x: update driver version to 1.62.00-6 bnx2x: properly calculate lro_mss bnx2x: perform statistics "action" before state transition. bnx2x: properly configure coefficients for MinBW algorithm (NPAR mode). bnx2x: Fix ethtool -t link test for MF (non-pmf) devices. bnx2x: Fix nvram test for single port devices. ...
2011-03-03Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: kill loop_mutex blktrace: Remove blk_fill_rwbs_rq. block: blk-flush shouldn't call directly into q->request_fn() __blk_run_queue() block: add @force_kblockd to __blk_run_queue() block: fix kernel-doc format for blkdev_issue_zeroout blk-throttle: Do not use kblockd workqueue for throtl work
2011-03-03Merge branch 'i_nlink' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'i_nlink' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: hfs: fix rename() over non-empty directory udf: fix i_nlink limit fix reiserfs mkdir() breakage exofs: i_nlink races in rename() nilfs2: i_nlink races in rename() minix: i_nlink races in rename() ufs: i_nlink races in rename() sysv: i_nlink races in rename()
2011-03-03DNS: Fix a NULL pointer deref when trying to read an error key [CVE-2011-1076]David Howells
When a DNS resolver key is instantiated with an error indication, attempts to read that key will result in an oops because user_read() is expecting there to be a payload - and there isn't one [CVE-2011-1076]. Give the DNS resolver key its own read handler that returns the error cached in key->type_data.x[0] as an error rather than crashing. Also make the kenter() at the beginning of dns_resolver_instantiate() limit the amount of data it prints, since the data is not necessarily NUL-terminated. The buggy code was added in: commit 4a2d789267e00b5a1175ecd2ddefcc78b83fbf09 Author: Wang Lei <wang840925@gmail.com> Date: Wed Aug 11 09:37:58 2010 +0100 Subject: DNS: If the DNS server returns an error, allow that to be cached [ver #2] This can trivially be reproduced by any user with the following program compiled with -lkeyutils: #include <stdlib.h> #include <keyutils.h> #include <err.h> static char payload[] = "#dnserror=6"; int main() { key_serial_t key; key = add_key("dns_resolver", "a", payload, sizeof(payload), KEY_SPEC_SESSION_KEYRING); if (key == -1) err(1, "add_key"); if (keyctl_read(key, NULL, 0) == -1) err(1, "read_key"); return 0; } What should happen is that keyctl_read() reports error 6 (ENXIO) to the user: dns-break: read_key: No such device or address but instead the kernel oopses. This cannot be reproduced with the 'keyutils add' or 'keyutils padd' commands as both of those cut the data down below the NUL termination that must be included in the data. Without this dns_resolver_instantiate() will return -EINVAL and the key will not be instantiated such that it can be read. The oops looks like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff811b99f7>] user_read+0x4f/0x8f PGD 3bdf8067 PUD 385b9067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:19.0/irq CPU 0 Modules linked in: Pid: 2150, comm: dns-break Not tainted 2.6.38-rc7-cachefs+ #468 /DG965RY RIP: 0010:[<ffffffff811b99f7>] [<ffffffff811b99f7>] user_read+0x4f/0x8f RSP: 0018:ffff88003bf47f08 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff88003b5ea378 RCX: ffffffff81972368 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003b5ea378 RBP: ffff88003bf47f28 R08: ffff88003be56620 R09: 0000000000000000 R10: 0000000000000395 R11: 0000000000000002 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffffffffa1 FS: 00007feab5751700(0000) GS:ffff88003e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000003de40000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process dns-break (pid: 2150, threadinfo ffff88003bf46000, task ffff88003be56090) Stack: ffff88003b5ea378 ffff88003b5ea3a0 0000000000000000 0000000000000000 ffff88003bf47f68 ffffffff811b708e ffff88003c442bc8 0000000000000000 00000000004005a0 00007fffba368060 0000000000000000 0000000000000000 Call Trace: [<ffffffff811b708e>] keyctl_read_key+0xac/0xcf [<ffffffff811b7c07>] sys_keyctl+0x75/0xb6 [<ffffffff81001f7b>] system_call_fastpath+0x16/0x1b Code: 75 1f 48 83 7b 28 00 75 18 c6 05 58 2b fb 00 01 be bb 00 00 00 48 c7 c7 76 1c 75 81 e8 13 c2 e9 ff 4c 8b b3 e0 00 00 00 4d 85 ed <41> 0f b7 5e 10 74 2d 4d 85 e4 74 28 e8 98 79 ee ff 49 39 dd 48 RIP [<ffffffff811b99f7>] user_read+0x4f/0x8f RSP <ffff88003bf47f08> CR2: 0000000000000010 Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> cc: Wang Lei <wang840925@gmail.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-03-03libceph: retry after authorization failureSage Weil
If we mark the connection CLOSED we will give up trying to reconnect to this server instance. That is appropriate for things like a protocol version mismatch that won't change until the server is restarted, at which point we'll get a new addr and reconnect. An authorization failure like this is probably due to the server not properly rotating it's secret keys, however, and should be treated as transient so that the normal backoff and retry behavior kicks in. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-03libceph: fix handling of short returns from get_user_pagesSage Weil
get_user_pages() can return fewer pages than we ask for. We were returning a bogus pointer/error code in that case. Instead, loop until we get all the pages we want or get an error we can return to the caller. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-03MAINTAINERS: Add Andy Gospodarek as co-maintainer.Jay Vosburgh
Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: zero proper structure size for geometry calls
2011-03-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix regression that i-flag is not set on changeless checkpoints
2011-03-03r8169: disable ASPMStanislaw Gruszka
For some time is known that ASPM is causing troubles on r8169, i.e. make device randomly stop working without any errors in dmesg. Currently Tomi Leppikangas reports that system with r8169 device hangs with MCE errors when ASPM is enabled: https://bugzilla.redhat.com/show_bug.cgi?id=642861#c4 Lets disable ASPM for r8169 devices at all, to avoid problems with r8169 PCIe devices at least for some users. Reported-by: Tomi Leppikangas <tomi.leppikangas@gmail.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03Merge branch 'for_2.6.38/pm-fixes' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-fixes
2011-03-03omap: mailbox: resolve hang issueHari Kanigeri
omap4 interrupt disable bits is different. On rx kfifo full, the mbox rx interrupts wasn't getting disabled, and this is causing the rcm stress tests to hang. Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Armando Uribe <x0095078@ti.com> Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-03ceph: do not clear I_COMPLETE from d_releaseSage Weil
First, this was racy anyway: d_release isn't called until well after the dentry is unhashed. Second, this runs afoul of the recent dcache change that clears d_parent prior to calling d_release (949854d0), causing a NULL pointer dereference. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-03ceph: do not set I_COMPLETESage Weil
Do not set the I_COMPLETE flag on directories until we resolve races with dcache pruning. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-03Revert "ceph: keep reference to parent inode on ceph_dentry"Sage Weil
This reverts commit 97d79b403ef03f729883246208ef5d8a2ebc4d68. This fails to account for d_parent changes due to rename or disconnected dentries due to submounts or NFS reexports. Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-03[S390] tape: deadlock on system work queueMartin Schwidefsky
The 34xx and 3590 tape driver uses the system work queue to defer work from the interrupt function to process context, e.g. a medium sense after an unsolicited interrupt. The tape commands started by the work handler need to be asynchronous, otherwise a deadlock on the system work queue can occur. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-03[S390] keyboard: integer underflow bugDan Carpenter
The "ct" variable should be an unsigned int. Both struct kbdiacrs ->kb_cnt and struct kbd_data ->accent_table_size are unsigned ints. Making it signed causes a problem in KBDIACRUC because the user could set the signed bit and cause a buffer overflow. Cc: <stable@kernel.org> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-03[S390] xpram: remove __initdata attribute from module parametersMartin Schwidefsky
The module parameter 'devs' and 'sizes' are marked as __initdata. The memory for the parameters are freed after module_init completed. This can lead to kernel crashes in param_free_charp. Remove the __initdata attribute to fix the problem. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-03block: kill loop_mutexPetr Uzel
Following steps lead to deadlock in kernel: dd if=/dev/zero of=img bs=512 count=1000 losetup -f img mkfs.ext2 /dev/loop0 mount -t ext2 -o loop /dev/loop0 mnt umount mnt/ Stacktrace: [<c102ec04>] irq_exit+0x36/0x59 [<c101502c>] smp_apic_timer_interrupt+0x6b/0x75 [<c127f639>] apic_timer_interrupt+0x31/0x38 [<c101df88>] mutex_spin_on_owner+0x54/0x5b [<fe2250e9>] lo_release+0x12/0x67 [loop] [<c10c4eae>] __blkdev_put+0x7c/0x10c [<c10a4da5>] fput+0xd5/0x1aa [<fe2250cf>] loop_clr_fd+0x1a9/0x1b1 [loop] [<fe225110>] lo_release+0x39/0x67 [loop] [<c10c4eae>] __blkdev_put+0x7c/0x10c [<c10a59d9>] deactivate_locked_super+0x17/0x36 [<c10b6f37>] sys_umount+0x27e/0x2a5 [<c10b6f69>] sys_oldumount+0xb/0xe [<c1002897>] sysenter_do_call+0x12/0x26 [<ffffffff>] 0xffffffff Regression since 2a48fc0ab24241755dc9, which introduced the private loop_mutex as part of the BKL removal process. As per [1], the mutex can be safely removed. [1] http://www.gossamer-threads.com/lists/linux/kernel/1341930 Addresses: https://bugzilla.novell.com/show_bug.cgi?id=669394 Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=29172 Signed-off-by: Petr Uzel <petr.uzel@suse.cz> Cc: stable@kernel.org Reviewed-by: Nikanth Karthikesan <knikanth@suse.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-03blktrace: Remove blk_fill_rwbs_rq.Tao Ma
If we enable trace events to trace block actions, We use blk_fill_rwbs_rq to analyze the corresponding actions in request's cmd_flags, but we only choose the minor 2 bits from it, so most of other flags(e.g, REQ_SYNC) are missing. For example, with a sync write we get: write_test-2409 [001] 160.013869: block_rq_insert: 3,64 W 0 () 258135 + = 8 [write_test] Since now we have integrated the flags of both bio and request, it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and blk_fill_rwbs_rq isn't needed any more. With this patch, after a sync write we get: write_test-2417 [000] 226.603878: block_rq_insert: 3,64 WS 0 () 258135 += 8 [write_test] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-03ALSA: hda - Don't set to D3 in Cirrus errata init verbsTakashi Iwai
The errata init verbs for CS42xx codecs contain the verbs to set the power-state of SPDIF nodes to D3, which seem to break the SPDIF output on some MacBooks. Since this is executed during the power-up initialization, we shouldn't turn them down there. Reported-by: Arun Raghavan <arun.raghavan@collabora.co.uk> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-03ALSA: hda - add new Fermi 5xx codec IDs to snd-hdaRichard Samson
Added the missing HDMI codec IDs for new Nvidia stuff. Note that ID 0x17 isn't assigned to anything so far, as suggested by Stephen. [Modified to get rid of 0x17 by tiwai] Signed-off-by: Richard Samson <samson.richard@gmail.com> Acked-by: Acked-By: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-03hfs: fix rename() over non-empty directoryAl Viro
merge hfs_unlink() and hfs_rmdir(), while we are at it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-03udf: fix i_nlink limitAl Viro
(256 << sizeof(x)) - 1 is not the maximal possible value of x... In reality, the maximal allowed value for UDF FileLinkCount is 65535. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-03fix reiserfs mkdir() breakageAl Viro
if directory has so many subdirectories that its link count is set to 1 (i.e. "can't tell accurately") and reiserfs_new_inode() fails, we shouldn't decrement the parent's link count in cleanup path; that's what DEC_DIR_INODE_NLINK() is for. As it is, we end up with parent suddenly getting zero i_nlink, with very unpleasant effects. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-03exofs: i_nlink races in rename()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-03nilfs2: i_nlink races in rename()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v0.10.2 at 2024-11-17 18:42:20 (GMT)