summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-02perf: Enable building perf tools for MetaJames Hogan
Define rmb(), cpu_relax(), and CPUINFO_PROC for Meta so that the perf tools can be built for Meta. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2013-03-02metag: add boot time LNKGET/LNKSET checkJames Hogan
Add boot time check for whether LNKGET/LNKSET go through or around the cache. Depending on the configuration an info message (no harm), warning (technically wrong but no harm), or big WARN (expect failure in either kernel or userland) may be emitted if the behaviour is not as expected: Configuration Hardware Response ------------------------------------------ -------- -------- AROUND_CACHE through pr_info !AROUND_CACHE && ATOMICITY_LNKGET around WARN (kernel) " && !ATOMICITY_LNKGET && SMP around WARN (user) " " && !SMP around pr_warn Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: add __init to metag_cache_probe()James Hogan
metag_cache_probe() is only called from setup_arch(), so add the __init attribute to it. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Add JTAG Debug Adapter (DA) supportJames Hogan
Add basic JTAG Debug Adapter (DA) support so that drivers which communicate with the DA can detect whether one is actually present (otherwise the target will halt indefinitely). This allows the metag_da TTY driver and imgdafs filesystem driver to be built, updates defconfigs, and sets up the metag_da console early if it's configured in. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02scripts/checkstack.pl: Add metag supportJames Hogan
Adapt checkstack.pl so that it works for metag. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: ftrace supportJames Hogan
Add ftrace support for metag. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-02metag: PerfJames Hogan
Add Perf support for metag. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2013-03-02metag: Build infrastructureJames Hogan
Add metag build infrastructure. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02Kconfig.debug: add METAG to dependency listsJames Hogan
Add [!]METAG to a couple of Kconfig dependencies in lib/Kconfig.debug. Don't allow stack utilization instrumentation on metag, and allow building with frame pointers. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Paul E. McKenney" <paul.mckenney@linaro.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com>
2013-03-02mm: define VM_GROWSUP for CONFIG_METAGJames Hogan
Commit cc2383ec06be093789469852e1fe96e1148e9a2c ("mm: introduce arch-specific vma flag VM_ARCH_1") merged in v3.7-rc1. The above commit combined several arch-specific vma flags into one, and in the process it changed the VM_GROWSUP definition to depend on specific architectures rather than CONFIG_STACK_GROWSUP. Therefore add an ifdef for CONFIG_METAG to also set VM_GROWSUP. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-mm@kvack.org
2013-03-02metag: Various other headersJames Hogan
Add the remaining metag header files: - byteorder.h, swab.h (byte order and swapping) - barrier.h, cpu.h. hwthread.h, processor.h (hardware thread related) - bug.h, elf.h, gpio.h, linkage.h, resource.h (other) Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Stack unwindingJames Hogan
Add stack unwinding support for metag. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Optimised library functionsJames Hogan
Add optimised library functions for metag. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: DMAJames Hogan
Add DMA mapping code. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: SMP supportJames Hogan
Add SMP support for metag. This allows Linux to take control of multiple hardware threads on a single Meta core, treating them as separate Linux CPUs. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Basic documentationJames Hogan
Add basic metag documentation. This includes an outline description of the ABIs (including syscall ABI) and calling conventions, similar to the one in Documentation/frv/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Rob Landley <rob@landley.net> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: linux-doc@vger.kernel.org
2013-03-02metag: Atomics, locks and bitopsJames Hogan
Add header files to implement Meta hardware thread locks (used by some other atomic operations), atomics, spinlocks, and bitops. There are 2 main types of atomic primitives for metag (in addition to IRQs off on UP): - LOCK instructions provide locking between hardware threads. - LNKGET/LNKSET instructions provide load-linked/store-conditional operations allowing for lighter weight atomics on Meta2 LOCK instructions allow for hardware threads to acquire voluntary or exclusive hardware thread locks: - LOCK0 releases exclusive and voluntary lock from the running hardware thread. - LOCK1 acquires the voluntary hardware lock, blocking until it becomes available. - LOCK2 implies LOCK1, and additionally acquires the exclusive hardware lock, blocking all other hardware threads from executing. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Module supportJames Hogan
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Scheduling/Process managementJames Hogan
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: System CallsJames Hogan
Add metag system call and gateway page interfaces. The metag architecture port uses the generic system call numbers from asm-generic/unistd.h, as well as a user gateway page mapped at 0x6ffff000 which contains fast atomic primitives (depending on SMP) and a fast method of accessing TLS data. System calls use the SWITCH instruction with the immediate 0x440001 to signal a system call. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Internal and external irqchipsJames Hogan
Meta core internal interrupts (from HWSTATMETA and friends) are vectored onto the TR1 core trigger for the current thread. This is demultiplexed in irq-metag.c to individual Linux IRQs for each internal interrupt. External SoC interrupts (from HWSTATEXT and friends) are vectored onto the TR2 core trigger for the current thread. This is demultiplexed in irq-metag-ext.c to individual Linux IRQs for each external SoC interrupt. The external irqchip has devicetree bindings for configuring the number of irq banks and the type of masking available. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Dom Cobley <popcornmix@gmail.com> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-doc@vger.kernel.org
2013-03-02metag: IRQ handlingJames Hogan
Add core IRQ handling for metag. The code in irq.c exposes the TBX signal numbers as Linux IRQs. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: TrapsJames Hogan
Add trap code for metag. At the lowest level Meta traps (and return from interrupt instruction - RTI) simply swap the PC and PCX registers and optionally toggle the interrupt status bit (ISTAT). Low level TBX code in tbipcx.S handles the core context save, determine the TBX signal number based on the core trigger that fired (using the TXSTATI status register), and call TBX signal handlers (mostly in traps.c) via a vector table. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Al Viro <viro@zeniv.linux.org.uk>
2013-03-02metag: Time keepingJames Hogan
Add time keeping code for metag. Meta hardware threads have 2 timers. The background timer (TXTIMER) is used as a free-running time base, and the interrupt timer (TXTIMERI) is used for the timer interrupt. Both counters traditionally count at approximately 1MHz. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-03-02metag: ptraceJames Hogan
The ptrace interface for metag provides access to some core register sets using the PTRACE_GETREGSET and PTRACE_SETREGSET operations. The details of the internal context structures is abstracted into user API structures to both ease use and allow flexibility to change the internal context layouts. Copyin and copyout functions for these register sets are exposed to allow signal handling code to use them to copy to and from the signal context. struct user_gp_regs (NT_PRSTATUS) provides access to the core general purpose register context. struct user_cb_regs (NT_METAG_CBUF) provides access to the TXCATCH* registers which contains information abuot a memory fault, unaligned access error or watchpoint. This can be modified to alter the way the fault is replayed on resume ("catch replay"), or to prevent the replay taking place. struct user_rp_state (NT_METAG_RPIPE) provides access to the state of the Meta read pipeline which can be used to hide memory latencies in hand optimised data loops. Extended DSP register state, DSP RAM, and hardware breakpoint registers aren't yet exposed through ptrace. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Tony Lindgren <tony@atomide.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
2013-03-02metag: Device treeJames Hogan
Add device tree files to arch/metag. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Vineet Gupta <vgupta@synopsys.com>
2013-03-02metag: Signal handlingJames Hogan
Add signal handling code for metag. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Al Viro <viro@zeniv.linux.org.uk>
2013-03-02metag: TCM supportJames Hogan
Add some TCM support Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Highmem supportJames Hogan
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Huge TLBJames Hogan
Add huge TLB support to the metag architecture. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Memory handlingJames Hogan
Meta has instructions for accessing: - bytes - GETB (1 byte) - words - GETW (2 bytes) - doublewords - GETD (4 bytes) - longwords - GETL (8 bytes) All accesses must be aligned. Unaligned accesses can be detected and made to fault on Meta2, however it isn't possible to fix up unaligned writes so we don't bother fixing up reads either. This patch adds metag memory handling code including: - I/O memory (io.h, ioremap.c): Actually any virtual memory can be accessed with these helpers. A part of the non-MMUable address space is used for memory mapped I/O. The ioremap() function is implemented one to one for non-MMUable addresses. - User memory (uaccess.h, usercopy.c): User memory is directly accessible from privileged code. - Kernel memory (maccess.c): probe_kernel_write() needs to be overwridden to use the I/O functions when doing a simple aligned write to non-writecombined memory, otherwise the write may be split by the generic version. Note that due to the fact that a portion of the virtual address space is non-MMUable, and therefore always maps directly to the physical address space, metag specific I/O functions are made available (metag_in32, metag_out32 etc). These cast the address argument to a pointer so that they can be used with raw physical addresses. These accessors are only to be used for accessing fixed core Meta architecture registers in the non-MMU region, and not for any SoC/peripheral registers. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Memory managementJames Hogan
Add memory management files for metag. Meta's 32bit virtual address space is split into two halves: - local (0x08000000-0x7fffffff): traditionally local to a hardware thread and incoherent between hardware threads. Each hardware thread has it's own local MMU table. On Meta2 the local space can be globally coherent (GCOn) if the cache partitions coincide. - global (0x88000000-0xffff0000): coherent and traditionally global between hardware threads. On Meta2, each hardware thread has it's own global MMU table. The low 128MiB of each half is non-MMUable and maps directly to the physical address space: - 0x00010000-0x07ffffff: contains Meta core registers and maps SoC bus - 0x80000000-0x87ffffff: contains low latency global core memories Linux usually further splits the local virtual address space like this: - 0x08000000-0x3fffffff: user mappings - 0x40000000-0x7fffffff: kernel mappings Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Cache/TLB handlingJames Hogan
Add cache and TLB handling code for metag, including the required callbacks used by MM switches and DMA operations. Caches can be partitioned between the hardware threads and the global space, however this is usually configured by the bootloader so Linux doesn't make any changes to this configuration. TLBs aren't configurable, so only need consideration to flush them. On Meta1 the L1 cache was VIVT which required a full flush on MM switch. Meta2 has a VIPT L1 cache so it doesn't require the full flush on MM switch. Meta2 can also have a writeback L2 with hardware prefetch which requires some special handling. Support is optional, and the L2 can be detected and initialised by Linux. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: TBX sourceJames Hogan
Add source files from the Thread Binary Interface (TBI) library which provides useful low level operations and traps/context management. Among other things it handles interrupt/exception/syscall entry (in tbipcx.S). Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: TBX headerJames Hogan
Add the main header for the Thread Binary Interface (TBI) library which provides useful low level operations and trap/context management. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: BootJames Hogan
Add boot code for metag. Due to the multi-threaded nature of Meta it is not uncommon for an RTOS or bare metal application to be started on other hardware threads by the bootloader. Since there is a single MMU switch which affects all threads, the MMU is traditionally configured by the bootloader prior to starting Linux. The bootloader passes a structure to Linux which among other things contains information about memory regions which have been mapped. Linux then assumes control of the local heap memory region. A kernel arguments string pointer or a flattened device tree pointer can be provided in the third argument. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Header for core memory mapped registersJames Hogan
Add the header <asm/metag_mem.h> describing addresses, fields, and bits of various core memory mapped registers in the low non-MMU region. Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Headers for core arch constantsJames Hogan
Add a couple of header files containing core architecture constants. The first (<asm/metag_isa.h>) contains some constants relating to the instruction set, such as values to give to the CACHEW and CACHER instructions. The second (<asm/metag_regs.h>) contains constants for the core register units directly accessible to various instructions, and for the registers, fields, and bits in those units. The main units described are the control unit (CT.*), the trigger unit (TR.*), and the run-time trace unit (TT.*). Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-02metag: Add MAINTAINERS entryJames Hogan
Add MAINTAINERS entry for the metag architecture port. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Cesar Eduardo Barros <cesarb@cesarb.net> Cc: Joe Perches <joe@perches.com> Cc: "David S. Miller" <davem@davemloft.net>
2013-03-02trace/ring_buffer: handle 64bit aligned structsJames Hogan
Some 32 bit architectures require 64 bit values to be aligned (for example Meta which has 64 bit read/write instructions). These require 8 byte alignment of event data too, so use !CONFIG_HAVE_64BIT_ALIGNED_ACCESS instead of !CONFIG_64BIT || CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to decide alignment, and align buffer_data_page::data accordingly. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> (previous version subtly different)
2013-03-02Add HAVE_64BIT_ALIGNED_ACCESSJames Hogan
On 64 bit architectures with no efficient unaligned access, padding and explicit alignment must be added in various places to prevent unaligned 64bit accesses (such as taskstats and trace ring buffer). However this also needs to apply to 32 bit architectures with 64 bit accesses requiring alignment such as metag. This is solved by adding a new Kconfig symbol HAVE_64BIT_ALIGNED_ACCESS which defaults to 64BIT && !HAVE_EFFICIENT_UNALIGNED_ACCESS, and can be explicitly selected by METAG and any other relevant architectures. This can be used in various places to determine whether 64bit alignment is required. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Paris <eparis@redhat.com> Cc: Will Drewry <wad@chromium.org>
2013-03-02Revert some of "binfmt_elf: cleanups"James Hogan
The commit "binfmt_elf: cleanups" (f670d0ecda73b7438eec9ed108680bc5f5362ad8) removed an ifndef elf_map but this breaks compilation for metag which does define elf_map. This adds the ifndef back in as it was before, but does not affect the other cleanups made by that patch. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Acked-by: Mikael Pettersson <mikpe@it.uu.se>
2013-03-02asm-generic/unistd.h: handle symbol prefixes in cond_syscallJames Hogan
Some architectures have symbol prefixes and set CONFIG_SYMBOL_PREFIX, but this wasn't taken into account by the generic cond_syscall. It's easy enough to fix in a generic fashion, so add the symbol prefix to symbol names in cond_syscall when CONFIG_SYMBOL_PREFIX is set. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
2013-03-02asm-generic/io.h: check CONFIG_VIRT_TO_BUSJames Hogan
Make asm-generic/io.h check CONFIG_VIRT_TO_BUS before defining virt_to_bus() and bus_to_virt(), otherwise it's easy to accidentally have a silently failing incorrect direct mapped definition rather then no definition at all. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-03-02Merge tag 'dm-3.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper update from Alasdair G Kergon: "The main addition here is a long-desired target framework to allow an SSD to be used as a cache in front of a slower device. Cache tuning is delegated to interchangeable policy modules so these can be developed independently of the mechanics needed to shuffle the data around. Other than that, kcopyd users acquire a throttling parameter, ioctl buffer usage gets streamlined, more mempool reliance is reduced and there are a few other bug fixes and tidy-ups." * tag 'dm-3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (30 commits) dm cache: add cleaner policy dm cache: add mq policy dm: add cache target dm persistent data: add bitset dm persistent data: add transactional array dm thin: remove cells from stack dm bio prison: pass cell memory in dm persistent data: add btree_walk dm: add target num_write_bios fn dm kcopyd: introduce configurable throttling dm ioctl: allow message to return data dm ioctl: optimize functions without variable params dm ioctl: introduce ioctl_flags dm: merge io_pool and tio_pool dm: remove unused _rq_bio_info_cache dm: fix limits initialization when there are no data devices dm snapshot: add missing module aliases dm persistent data: set some btree fn parms const dm: refactor bio cloning dm: rename bio cloning functions ...
2013-03-02Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target patches from Nicholas Bellinger: "Here are the remaining target-pending patches for v3.9-rc1. The most important one here is the immediate queue starvation regression fix for iscsi-target, which addresses a bug that's effecting v3.5+ kernels under heavy sustained READ only workloads. Thanks alot to Benjamin Estrabaud for helping to track this down! Also included is a pSCSI exception bugfix from Asias, along with a handful of other minor changes. Both bugfixes are CC'ed to stable." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/pscsi: Rename sg_num to nr_vecs in pscsi_get_bio() target/pscsi: Fix page increment target/pscsi: Drop unnecessary NULL assignment to bio->bi_next target: Add __exit annotation for module_exit functions iscsi-target: Fix immediate queue starvation regression with DATAIN
2013-03-02Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is an assorted set of stragglers into the merge window with driver updates for qla2xxx, megaraid_sas, storvsc and ufs. It also includes pulls of the uapi tree (all the remaining SCSI pieces) and the fcoe tree (updates to fcoe and libfc)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (81 commits) [SCSI] ufs: Separate PCI code into glue driver [SCSI] ufs: Segregate PCI Specific Code [SCSI] scsi: fix lpfc build when wmb() is defined as mb() [SCSI] storvsc: Handle dynamic resizing of the device [SCSI] storvsc: Restructure error handling code on command completion [SCSI] storvsc: avoid usage of WRITE_SAME [SCSI] aacraid: suppress two GCC warnings [SCSI] hpsa: check for dma_mapping_error in hpsa_passthru ioctls [SCSI] hpsa: reorganize error handling in hpsa_passthru_ioctl [SCSI] hpsa: check for dma_mapping_error in hpsa_map_sg_chain_block [SCSI] hpsa: Check for dma_mapping_error for all code paths using fill_cmd [SCSI] hpsa: Check for dma_mapping_error in hpsa_map_one [SCSI] dc395x: uninitialized variable in device_alloc() [SCSI] Fix range check in scsi_host_dif_capable() [SCSI] storvsc: Initialize the sglist [SCSI] mpt2sas: Add support for OEM specific controller [SCSI] ipr: Fix oops while resetting an ipr adapter [SCSI] fnic: Fnic Trace Utility [SCSI] fnic: New debug flags and debug log messages [SCSI] fnic: fnic driver may hit BUG_ON on device reset ...
2013-03-02parisc: fix redefinition of SET_PERSONALITYHelge Deller
commit e72837e3e7bae3f182c4ac63c9424e86f1158dd0 introduced a default SET_PERSONALITY() in include/linux/elf.h. This breaks with our own SET_PERSONALITY define for 32bit userspace on 64bit kernel. Signed-off-by: Helge Deller <deller@gmx.de>
2013-03-02parisc: do not install modules when installing kernelRolf Eike Beer
PA-RISC is the only arch that installs the modules when installing the kernel. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2013-03-02parisc: fix compile warnings triggered by atomic_sub(sizeof(),v)Helge Deller
This fixes compile warnings like this one: net/ipv4/igmp.c: In function ‘ip_mc_leave_group’: net/ipv4/igmp.c:1898:3: warning: overflow in implicit constant conversion [-Woverflow] atomic_sub() is defined as __atomic_add_return(-(VAL),(v)))) and if VAL is of type unsigned int (as returned by sizeof()), negating this value will overflow. Fix this by type-casting VAL to int type. Signed-off-by: Helge Deller <deller@gmx.de>