summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-01-09V4L/DVB (3116): tda9887 improvements: better defaults, better configurability.Hans Verkuil
- Set the tuner takeover point to 0x10 for NTSC/radio and 0x14 for PAL/SECAM. - Allow override through TDA9887_SET_CONFIG - PAL-N belongs with PAL-BG as does PAL-H. PAL-Nc belongs to PAL-M - Add SECAM-BGH - Set video freq to cVideoIF_38_90 for DK standards. - Add cTunerGainLow to radio, change deemphasis to 75 for mono. - Add ntsc module param for 'M' and 'J' (Japanese) standards. - Fix module handling for 2.4. - Now able to select all standards through pal/secam/ntsc module options Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3115): Add missing VIDEO_ADV_DEBUG config option.Hans Verkuil
- Add missing VIDEO_ADV_DEBUG config option. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3112): Several fixes for Hauppauge Roselyn Design (blackbird)Steven Toth
- This patch adds eeprom awareness for the Roslyn. In effect, the blackbird will query the tuner V4L2_STD_xxxx definitions to determine whether it's connected to a NTSC or PAL tuner. Based on that, various default values will change for blackbird encoding. - Fixes back panel SVIDEO/COMPOSITE with audio, work properly. - Fixes a problem with lip sync issues, due to bad framerate vs audio rate assumptions. - Fixed a problem with the GPIO configuration in cx88-cards. - Removed the comments in cx88-cards that made no sense. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3110): Replace all uses of pci_module_init with pci_register_driverOtavio Salvador
This patch replace all calls to pci_module_init, that's deprecated and will be removed in future, with pci_register_driver that should be the used function now. Signed-off-by: Otavio Salvador <otavio@debian.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3108): tveeprom cleanup of hardcoded tuner format values.Steven Toth
- Cleaned up the structure to use the V4L2_STD_xxx definitions rather than a one off set of hardcoded values - which could change in the future. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3105): Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support.Hans Verkuil
- Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3104): MSP3400 miscelaneous fixesMauro Carvalho Chehab
- Removes obsoleted stuff - Reorders some stuff to make it clearer to read - Clears some debug messages Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3103): Add VIDIOC_LOG_STATUS to tuner-core.cHans Verkuil
- Mark tda9887.c status log values as hexadecimal (add 0x prefix). Add VIDIOC_LOG_STATUS support to tuner-core.c. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3100): fix compile error, remove dead code and volume scalingHans Verkuil
- Fix compile error (missing '}') in em28xx-video.c. Remove dead code and volume scaling from msp3400.c. Volume scaling does not belong there, it should be done in the driver for the card that uses the msp3400 if needed, not in the msp3400.c source. The volume scaling code gave problems with the ivtv driver which does not need to do any scaling. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3099): Fixed device controls for em28xx on WinTV USB2 devicesMauro Carvalho Chehab
- Controls now come from video and audio decoder driver for msp3400 and tvp5150. - Added audio and sound controls as provided by msp3400 and tvp5150. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3092): Add support for another Nova-T-PCI PCI subdevice 0x9001Steven Toth
- Add support for another Nova-T-PCI PCI subdevice 0x9001 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3090): Cleanup check for dvb.Michael Krufky
- Cleanup check for dvb. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3089): Adding support for the Hauppauge HVR1100 and HVR1100-LP ↵Steven Toth
products. - Add support for the Hauppauge HVR1100 and HVR1100-LP products. - Add i2c_gate_ctrl callback function to dvb_frontend_ops struct. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3086): vfree(NULL) is legal.Michael Krufky
- vfree(NULL) is legal. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3084): Added a new debug msg to help identifying tuner ProblemsMauro Carvalho Chehab
- Added a new debug msg to help identifying tuner Problems Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3081): added offset parameter for adjusting tuner offset by handMauro Carvalho Chehab
- added offset parameter for adjusting tuner offset by hand Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3065): Fix gcc-4.0.2 compile error in msp3400.cHans Verkuil
- Fix gcc-4.0.2 compile error in msp3400.c. - msp_attach moved to reduce a prototype. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3064): Some cleanups on msp3400Hans Verkuil
- Change function order to reduce usage of function prototypes. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3062): Fix wrong tuner.h define for tuner 46Hans Verkuil
- Fix wrong tuner.h define for tuner 46 (it's a Panasonic, not a Microtune). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2390): Adds a time-delay to IR remote button presses for av7110 ir input,Noone Important
- Adds a time-delay to IR remote button presses for av7110_ir input, such that it acts more like a keyboard. A short press will be treated as a single button press. Holding down a button on the remote will respond like holding down a key on the keyboard, and result in a key-repeat. This just introduces a delay between the 1st press, and going into key-repeat so that it is possible to get a single 'up'. Signed-off-by: Noone Important <nxhxzi702 at sneakemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2454): Port code for SU1278/SH2 (TUA6100) from pre-refactored codeAndrew de Quincey
- Port code for SU1278/SH2 (TUA6100) from pre-refactored code Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2451): Add support for KWorld DVB-S 100, based on the same chips as ↵Vadim Catana
Hauppauge - Add support for KWorld DVB-S 100, based on the same chips as Hauppauge Nova-S Plus (CX23883/CX24123/CX24109), without the Intersil ISL6421, which is used for LNB control. - LNB voltage and tone are controled by LNBDC and LNBTone bits from register 0x29 of the CX24123 demodulator. - The MO_GP0_IO register from CX23883 is used to turn LNB power on and off. Signed-off-by: Vadim Catana <skystar@moldova.cc> Acked-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2446): Minor cleanups.Johannes Stezenbach
- Minor cleanups. Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2445): Added demodulator driver for Nova-S-Plus and Nova-SE2 DVB-S support.Steve Toth
- Added demodulator driver for Nova-S-Plus and Nova-SE2 DVB-S support. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2444): Implement frontend-specific tuning and the ability to disable zigzagAndrew de Quincey
- Implement frontend-specific tuning and the ability to disable zigzag Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2441): Driver support for live-ac3, firmware >= 2621 required.Dr. Werner Fink
- Driver support for live-ac3, firmware >= 2621 required. Signed-off-by: Dr. Werner Fink <werner@suse.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2440): Fixed mpeg audio on spdif from Nexus-CA card (rev 2.3),Marco Schluessler
- Fixed mpeg audio on spdif from Nexus-CA card (rev 2.3), definitions for sound chip MSP3415 Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2432): LNB power can now be switched off for Activy Budget-S rev GR/AL.Oliver Endriss
- LNB power can now be switched off for Activy Budget-S rev GR/AL. Dishnetwork support fixed for Nova-S with bsbe1/lnbp21 frontend and Activy Budget-S rev AL. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2431): Fixed dishnetwork support for Nexus-S rev 2.3Oliver Endriss
- Fixed dishnetwork support for Nexus-S rev 2.3 Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2428): Fixes for the topuptv/SCM mediaguard CAM module in KNC1 CI moduleAndrew de Quincey
- Fixes for the topuptv/SCM mediaguard CAM module in KNC1 CI module Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2421): Fixed oddities at firmware downloadHartmut Hackmann
- Fixed oddities at firmware download - more tolerant vs crystal frequency offset - lower sampling clock Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2420): Makes integration of future devices easierPatrick Boettcher
- To make the integration of future devices easier - modified the dvb-usb-part to allow a device-specific firmware download - added an option to specify whether a device reconnects after a firmware download or not. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (1021): Tuner description now follows the same CodingStyle as the othersMauro Carvalho Chehab
- Tuner description now follows the same CodingStyle as the others Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (0988): Tuner cleanups by removing Video IF from tuners structMauro Carvalho Chehab
- Video IF was removed from tuners struct. - Each Video standard have its own Video IF frequency, so it is related to video standard. Of course tuner also needs saw filters for IF, but this way, similar tuners can be grouped into just one entry, if they have the same cut-off freqs and the same switch config and global config. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (1007): Add support for KWorld DVB-S 100Vadim Catana
- Add support for KWorld DVB-S 100, based on the same chips as Hauppauge Nova-S Plus (CX23883/CX24123/CX24109), without the Intersil ISL6421, which is used for LNB control. - LNB voltage and tone are controled by LNBDC and LNBTone bits from register 0x29 of the CX24123 demodulator. - The MO_GP0_IO register from CX23883 is used to turn LNB power on and off. Signed-off-by: Vadim Catana <skystar@moldova.cc> Acked-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (0990): Enable IR support for the Nova-S-PlusSteven Toth
- Enable IR support for the Nova-S-Plus. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (0979): Added V4L support for the Nova-S-Plus and Nova-SE2 DVB-S productsSteven Toth
- Added V4L support for the Nova-S-Plus and Nova-SE2 DVB-S products. - Basic DVB-S support is working, analog video inputs work. - It has one or two fixme comments, primarily analog GPIOs (audio) and eeprom parsing. - CX24123 code (in cx88-dvb.c) disabled until the - cx24123 module is added to dvb-kernel cvs. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (1023): Added Hauppauge ImpactVCB boardSteven Toth
- Modifications to bttv to support the Hauppauge ImpactVCB product (Model #64900). Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (1019): Added basic support (tv + radio) for TerraTec Cinergy 250 PCIJörg Schummer
- Added "TerraTec Cinergy 250 PCI" board (tv and radio). - svideo not tested - IR yet not working Signed-off-by: Jörg Schummer <joerg.schummer@web.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (0987): Added Secam L' std on tda9887 and common macros moved to videodev2.hMauro Carvalho Chehab
- Added SECAM L' video standard - Common std macros moved to videodev2.h Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3152): Fixes some troubles at v4l2 compat stuffPhilippe De Muyter
- This patch fixes merge and typo problems in v4l2/compat, and fixes VIDIOC_STREAMON, VIDIOC_STREAMOFF & VIDIOC_S_FBUF. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3120): Adds 32-bit compatibility for v4l2 framegrabber ioctls.Philippe De Muyter
- Adds 32-bit compatibility for v4l2 framegrabber ioctls. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (0978): 64-bit fixes for removing warnings on compat_ioctl32Hans Verkuil
- 64-bit fixes for removing warnings on compat_ioctl32. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (0973): Another build fix for compat_ioctl32.cMishalÅ Pytasz
- Another build fix for compat_ioctl32.c Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (0972): More build fixes for compat_ioctl32.cNickolay V. Shmyrev
- More build fixes for compat_ioctl32.c Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (963): Explicit compat_ioctl32 handler to em28xxMauro Carvalho Chehab
- Included explicit compat_ioctl32 handler. - removed extra line on cardlist. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (957): Compat ioctl32 license fixRicardo Cerqueira
- Compat_ioctl32 license fix Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L (926_2): Moves compat32 functions from fs to v4l subsystemArnd Bergmann
This moves the 32 bit ioctl compatibility handlers for Video4Linux into a new file and adds explicit calls to them to each v4l device driver. Unfortunately, there does not seem to be any code handling the v4l2 ioctls, so quite often the code goes through two separate conversions, first from 32 bit v4l to 64 bit v4l, and from there to 64 bit v4l2. My patch does not change that, so there is still much room for improvement. Also, some drivers have additional ioctl numbers, for which the conversion should be handled internally to that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
2006-01-09[PATCH] Make vm86 support optionalMatt Mackall
This adds an option to remove vm86 support under CONFIG_EMBEDDED. Saves about 5k. This version eliminates most of the #ifdefs of the previous version and instead uses function stubs in vm86.h. Also, release_vm86_irqs is moved from asm-i386/irq.h to a more appropriate home in vm86.h so that the stubs can live together. $ size vmlinux-baseline vmlinux-novm86 text data bss dec hex filename 2920821 523232 190652 3634705 377611 vmlinux-baseline 2916268 523100 190492 3629860 376324 vmlinux-novm86 Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v0.10.2 at 2024-09-19 20:38:05 (GMT)