summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-12-11[POWERPC] Add SPRN for Embedded registers specified in PowerISA 2.04Kumar Gala
* Added SPRN for new architectural features added for embedded: - Alternate Time Base (ATB, ATBL, ATBU) - Doorbell Interrupts (IVOR36, IVOR37) - SPRG8/9 - External Proxy (EPR) - External PID load/store (EPLC, EPSC) * Added BUCSR for Freescale Embedded Processors * Moved around MAS7 so its in numeric order Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11[POWERPC] Early debug forces console log level to maxBenjamin Herrenschmidt
This makes the early debug option force the console loglevel to the max. The early debug option is meant to catch messages very early in the kernel boot process, in many cases, before the kernel has a chance to parse the "debug" command line argument. Thus it makes sense when CONFIG_PPC_EARLY_DEBUG is set, to force the console log level to the max at boot time. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Add of_translate_dma_addressBenjamin Herrenschmidt
This adds a variant of of_translate_address that uses the dma-ranges property instead of "ranges", it's to be used by PCI code in parsing the dma-ranges property. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Remove useless volatiles in udbg_16550.cBenjamin Herrenschmidt
This removes "volatile" from the MMIO pointer udbg_comport in udbg_16550.c driver, it's useless and makes checkpatch.pl complain when adding things to this file. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Change 32-bit PCI message about resource allocationBenjamin Herrenschmidt
The 32 bits PCI code will display a rather scary error message PCI: Cannot allocate resource region N of device XXX at boot when the existing setup of a device as left by the firmware doesn't match the kernel needs and the device needs to be moved. This is often not an error at all, as the kernel will generally easily reallocate the device elsewhere. This changes the message to something less scary and lowers its level from error to warning. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Fix powerpc 32-bit resource fixup for 64-bit resourcesBenjamin Herrenschmidt
The 32-bit powerpc resource fixup code uses unsigned longs to do the offsetting of resources which overflows on platforms such as 4xx where resources can be 64 bits. This fixes it by using resource_size_t instead. However, the IO stuff does rely on some 32 bits arithmetic, so we hack by cropping the result of the fixups for IO resources with a 32 bits mask. This isn't the prettiest but should work for now until we change the 32 bits PCI code to do IO mappings like 64 bits does, within a reserved are of the kernel address space. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Merge pci_process_bridge_OF_ranges()Benjamin Herrenschmidt
This merges the 32-bit and 64-bit implementations of pci_process_bridge_OF_ranges(). The new function is cleaner than both the old ones, and supports 64 bits ranges on ppc32 which is necessary for the 4xx port. It also adds some better (hopefully) output to the kernel log which should help diagnose problems and makes better use of existing OF parsing helpers (avoiding a few bugs of both implementations along the way). There are still a few unfortunate ifdef's but there is no way around these for now at least not until some other bits of the PCI code are made common. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Make isa_mem_base common to 32 and 64 bitsBenjamin Herrenschmidt
This defines isa_mem_base on both 32 and 64 bits (it used to be 32 bits only). This avoids a few ifdef's in later patches and potentially can allow support for VGA text mode on 64 bits powerpc. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11Merge branch 'linux-2.6' into for-2.6.25Paul Mackerras
2007-12-11[POWERPC] Update smu command definitionsMichael Hanselmann
This updates smu.h with several new commands, and adds parameter descriptions for existing commands. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Kill flatdevtree.cDavid Gibson
Now that earlier patches have switched the bootwrapper to using libfdt for device tree manipulation, this patch removes the now unused flatdevtree.c and related files. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Use embedded libfdt in the bootwrapperDavid Gibson
This incorporates libfdt (from the source embedded in an earlier commit) into the wrapper.a library used by the bootwrapper. This includes adding a libfdt_env.h file, which the libfdt sources need in order to integrate into the bootwrapper environment, and a libfdt-wrapper.c which provides glue to connect the bootwrapper's abstract device tree callbacks to the libfdt functions. In addition, this changes the various wrapper and platform files to use libfdt functions instead of the older flatdevtree.c library. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Merge libfdt upstream sourceDavid Gibson
This incorporates a copy of dtc libfdt into the kernel source, in arch/powerpc/boot/libfdt. This only imports the upstream sources verbatim, later patches are needed to actually link it into the kernel Makefiles. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] EEH: Avoid a possible NULL pointer dereferenceStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Merge vpdinfo.c into pci.cStephen Rothwell
There was only one global function in vpdinfo.c and it was only called from pci.c, so merge them and make the function static. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Clean up and simplify vdpinfo.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: DeCamelCase vpdinfo.cStephen Rothwell
This is a purely mechanical transformation. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Update xmon slb codewill schmidt
This adds a bit more detail to the xmon SLB output. When the valid bit is set, this displays the ESID and VSID values, as well as decoding the segment size -- 1T or 256M -- and displaying the LLP bits. This supresses the output for any slb entries that contain only zeros. sample output from power6 (1T segment support): 00 c000000008000000 40004f7ca3000500 1T ESID= c00000 VSID= 4f7ca3 LLP:100 01 d000000008000000 4000eb71b0000400 1T ESID= d00000 VSID= eb71b0 LLP: 0 08 0000000018000000 0000c8499f8ccc80 256M ESID= 1 VSID= c8499f8cc LLP: 0 09 00000000f8000000 0000d2c1a8e46c80 256M ESID= f VSID= d2c1a8e46 LLP: 0 10 0000000048000000 0000ca87eab1dc80 256M ESID= 4 VSID= ca87eab1d LLP: 0 43 cf00000008000000 400011b260000500 1T ESID= cf0000 VSID= 11b260 LLP:100 sample output from power5 (notice the non-valid but non-zero entries) 10 0000000008000000 00004fd0e077ac80 256M ESID= 0 VSID= 4fd0e077a LLP: 0 11 00000000f8000000 00005b085830fc80 256M ESID= f VSID= 5b085830f LLP: 0 12 0000000048000000 000052ce99fe6c80 256M ESID= 4 VSID= 52ce99fe6 LLP: 0 13 0000000018000000 000050904ed95c80 256M ESID= 1 VSID= 50904ed95 LLP: 0 14 cf00000008000000 0000d59aca40f500 256M ESID=cf0000000 VSID= d59aca40f LLP:100 15 c000000078000000 000045cb97751500 256M ESID=c00000007 VSID= 45cb97751 LLP:100 Tested on power5 and power6. Signed-Off-By: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Use SLB size from the device treeMichael Neuling
Currently we hardwire the number of SLBs to 64, but PAPR says we should use the ibm,slb-size property to obtain the number of SLB entries. This uses this property instead of assuming 64. If no property is found, we assume 64 entries as before. This soft patches the SLB handler, so it shouldn't change performance at all. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] pci_controller->arch_data really is a struct device_node *Stephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Don't special case pci_domain_nr() for iSeriesStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Remove some iSeries platform checks from the PCI codeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: hose->buid is always zero for iSeriesStephen Rothwell
so remove a firmware feature test. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Call iSeries_pcibios_init from setup_archStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Inline pci_setup_pci_controller as it has become trivialStephen Rothwell
and it becomes clear that we should use zalloc_maybe_bootmem. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Make pcibios_final_fixup not depend on pci_dnStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Reduce dependence on pci_dn bussubnoStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: iseries_ds_addr is only used in pci.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Remove pci_dn dependency from iSeries_Device_InformationStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Remove one layer of IO routinesStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Consoldiate PCI IO error checkStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Unindent and clean iSeries_pci_final_fixupStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Remove some dead code from pci.cStephen Rothwell
and an unnecessary cast. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: DeCamelCase pci.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Cleanup PCI retry code a littleStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Move find_Device_Node to avoid a forward declarationStephen Rothwell
Also remove another unnecessary forward declaration. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Consolidate pci_controllerStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Clean up pci-bridge.hStephen Rothwell
No semantic changes. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] pSeries: Remove dependency on pci_dn bussubnoStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iommu_free_table doesn't need the device_nodeStephen Rothwell
It only needs the iommu_table address. It also makes use of the node name to print error messages. So just pass it the things it needs. This reduces the places that know about the pci_dn by one. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] lparcfg: Remove useless buffer allocationNathan Lynch
The 'data' member of proc_ppc64_lparcfg is unused, but the lparcfg module's init routine allocates 4K for it. Remove the code which allocates and frees this buffer. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Update celleb_defconfig to add support for native CBEIshizaki Kou
Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] celleb: Add support for native CBEIshizaki Kou
This adds support for native CBE on Celleb, that is, without the BEAT hypervisor. Many codes in platforms/cell/ are used in native CBE environment. Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] cell: Fix undefined reference to mmio_nvram_initIshizaki Kou
This fixes the following link error with CONFIG_PPC_CELL_NATIVE=y and CONFIG_PPC_CELL_BLADE=n: arch/powerpc/platforms/built-in.o: In function `.cell_setup_arch': setup.c:(.init.text+0xe80): undefined reference to `.mmio_nvram_init' Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] kernel_execve is identical in 32 and 64 bitStephen Rothwell
so consolidate it into misc.S. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Add for_each_child_of_node() helper for iterating over child nodesMichael Ellerman
Add for_each_child_of_node() to encapsulate the common idiom of iterating over the children of a device_node. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Use of_register_driver to implement of_register_platform_driverStephen Rothwell
Also use of_unregister_driver to implement of_unregister_platform_driver. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-10Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix iosapic interrupt delivery mode for CPE [IA64] kprobe: make kreturn probe handler stack unwind correct [IA64] operator priority fix in acpi_map_lsapic() [IA64] Add missing "space" to concatenated strings [IA64] make full use of macro efi_md_size [IA64] rename _bss to __bss_start [IA64] SGI Altix : fix bug in sn_io_late_init() [IA64] iosapic cleanup [IA64] signal : fix missing error checkings [IA64] export copy_page() to modules [IA64] don't assume that unwcheck.py is executable [IA64] increase .data.patch offset
2007-12-10Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Fix xfs_ichgtime()s broken usage of I_SYNC [XFS] Make xfsbufd threads freezable [XFS] revert to double-buffering readdir [XFS] Fix broken inode cluster setup. [XFS] Clear XBF_READ_AHEAD flag on I/O completion. [XFS] Fixed a few bugs in xfs_buf_associate_memory() [XFS] 971064 Various fixups for xfs_bulkstat(). [XFS] Fix dbflush panic in xfs_qm_sync.
2007-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/fix-kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/fix-kbuild: kbuild: fix building with O=.. options kbuild: fix building with redirected output.