summaryrefslogtreecommitdiff
path: root/arch/arm/Makefile
AgeCommit message (Collapse)Author
2012-12-13Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform conversion patches from Olof Johansson: "Here are more patches in the progression towards multiplatform, sparse irq conversions in particular. Tegra has a handful of cleanups and general groundwork, but is not quite there yet on full enablement. Platforms that are enabled through this branch are VT8500 and Zynq. Note that i.MX was converted in one of the earlier cleanup branches as well (before we started a separate topic for multiplatform). And both new platforms for this merge window, sunxi and bcm, were merged with multiplatform support enabled." Fix up conflicts mostly as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: zynq: Remove all unused mach headers ARM: zynq: add support for ARCH_MULTIPLATFORM ARM: zynq: make use of debug_ll_io_init() ARM: zynq: remove TTC early mapping ARM: tegra: move debug-macro.S to include/debug ARM: tegra: don't include iomap.h from debug-macro.S ARM: tegra: decouple uncompress.h and debug-macro.S ARM: tegra: simplify DEBUG_LL UART selection options ARM: tegra: select SPARSE_IRQ ARM: tegra: enhance timer.c to get IO address from device tree ARM: tegra: enhance timer.c to get IRQ info from device tree ARM: timer: fix checkpatch warnings ARM: tegra: add TWD to device tree ARM: tegra: define DT bindings for and instantiate RTC ARM: tegra: define DT bindings for and instantiate timer clocksource/mtu-nomadik: use apb_pclk clk: ux500: Register mtu apb_pclocks ARM: plat-nomadik: convert platforms to SPARSE_IRQ mfd/db8500-prcmu: use the irq_domain_add_simple() mfd/ab8500-core: use irq_domain_add_simple() ...
2012-12-12Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-12-12Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Here's the updates for ARM for this merge window, which cover quite a variety of areas. There's a bunch of patch series from Will tackling various bugs like the PROT_NONE handling, ASID allocation, cluster boot protocol and ASID TLB tagging updates. We move to a build-time sorted exception table rather than doing the sorting at run-time, add support for the secure computing filter, and some updates to the perf code. We also have sorted out the placement of some headers, fixed some build warnings, fixed some hotplug problems with the per-cpu TWD code." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (73 commits) ARM: 7594/1: Add .smp entry for REALVIEW_EB ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets. ARM: 7595/1: syscall: rework ordering in syscall_trace_exit ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch. ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6 ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only ARM: 7587/1: implement optimized percpu variable access ARM: 7589/1: integrator: pass the lm resource to amba ARM: 7588/1: amba: create a resource parent registrator ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected ARM: gic: use a private mapping for CPU target interfaces ARM: kernel: add logical mappings look-up ARM: kernel: add cpu logical map DT init in setup_arch ARM: kernel: add device tree init map function ...
2012-12-11Merge branches 'cache-l2x0', 'fixes', 'hdrs', 'misc', 'mmci', 'vic' and ↵Russell King
'warnings' into for-next
2012-12-07ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accessesWill Deacon
Recent ARMv7 toolchains assume that unaligned memory accesses will not fault and will instead be handled by the processor. For the nommu case (without an MPU), memory will be treated as strongly-ordered and therefore unaligned accesses may fault regardless of the SCTLR.A setting. This patch passes -mno-unaligned-access to GCC when compiling for nommu targets, preventing the generation of unaligned memory access in the kernel. Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-03ARM: dt: change .dtb build rules to build in dts directoryGrant Likely
The current rules have the .dtb files build in a different directory from the .dts files. The only reason for this is that it was what PowerPC has done historically. This patch changes ARM to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Grant Likely <grant.likely@secretlab.ca> [swarren: added rm command for old stale .dtb files] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-11-21Merge branch 'zynq/multiplatform' of ↵Olof Johansson
git://git.monstr.eu/linux-2.6-microblaze into next/multiplatform From Michal Simek: This branch depends on arm-soc devel/debug_ll_init branch because we needed Rob's "ARM: implement debug_ll_io_init()" (sha1: afaee03511ba8002b26a9c6b1fe7d6baf33eac86) patch. This branch also depends on zynq/dt branch because of previous major zynq changes. zynq/cleanup branch is subset of zynq/dt. * 'zynq/multiplatform' of git://git.monstr.eu/linux-2.6-microblaze: ARM: zynq: Remove all unused mach headers ARM: zynq: add support for ARCH_MULTIPLATFORM ARM: zynq: make use of debug_ll_io_init() ARM: zynq: remove TTC early mapping ARM: zynq: add clk binding support to the ttc ARM: zynq: use zynq clk bindings clk: Add support for fundamental zynq clks ARM: zynq: dts: split up device tree ARM: zynq: Allow UART1 to be used as DEBUG_LL console. ARM: zynq: dts: add description of the second uart ARM: zynq: move arm-specific sys_timer out of ttc zynq: move static peripheral mappings zynq: remove use of CLKDEV_LOOKUP zynq: use pl310 device tree bindings zynq: use GIC device tree bindings Add/add conflict in arch/arm/Kconfig.debug. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-21Merge tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux ↵Olof Johansson
into next/soc From Maxime Ripard: Allwinner SoC support for 3.8 * tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux: ARM: sunxi: Add entry to MAINTAINERS ARM: sunxi: Add device tree for the A13 and the Olinuxino board ARM: sunxi: Add earlyprintk support ARM: sunxi: Add basic support for Allwinner A1x SoCs irqchip: sunxi: Add irq controller driver clocksource: sunxi: Add Allwinner A1X Timer Driver clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20Add support for generic BCM SoC chipsetsChristian Daudt
In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-16ARM: sunxi: Add basic support for Allwinner A1x SoCsMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stefan Roese <sr@denx.de>
2012-11-16Merge remote-tracking branch 'arm-soc/imx/multiplatform' into xSascha Hauer
2012-11-06Merge branch 'arm-next' of git://git.xilinx.com/linux-xlnx into next/cleanupOlof Johansson
From Michal Simek: * 'arm-next' of git://git.xilinx.com/linux-xlnx: zynq: move static peripheral mappings zynq: remove use of CLKDEV_LOOKUP zynq: use pl310 device tree bindings zynq: use GIC device tree bindings + Linux 3.7-rc3
2012-11-05ARM: plat-nomadik: move MTU, kill plat-nomadikLinus Walleij
This moves the MTU timer driver from arch/arm/plat-nomadik to drivers/clocksource and moves the header file to the platform_data directory. As this moves the last file being compiled to an object out of arch/arm/plat-nomadik, we have to "turn off the light" and delete the plat-nomadik directory, because it is not allowed to have an empty Makefile in a plat-* directory. This is probably also a desired side effect of depopulating the arch/arm directory of drivers. Luckily we have just deleted all the <plat/*> include files prior to this so by moving the last one we may delete the directory. After this all the Ux500 and Nomadik device drivers live outside of the arch/arm hierarchy. Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-29zynq: remove use of CLKDEV_LOOKUPJosh Cartwright
The Zynq support in mainline does not (yet) make use of any of the generic clk or clk lookup functionality. Remove what is upstream for now, until the out-of-tree implementation is in suitable form for merging. An important side effect of this patch is that it allows the building of a Zynq kernel without running into unresolved symbol problems: drivers/built-in.o: In function `amba_get_enable_pclk': clkdev.c:(.text+0x444): undefined reference to `clk_enable' drivers/built-in.o: In function `amba_remove': clkdev.c:(.text+0x488): undefined reference to `clk_disable' drivers/built-in.o: In function `amba_probe': clkdev.c:(.text+0x540): undefined reference to `clk_disable' drivers/built-in.o: In function `amba_device_add': clkdev.c:(.text+0x77c): undefined reference to `clk_disable' drivers/built-in.o: In function `enable_clock': clkdev.c:(.text+0x29738): undefined reference to `clk_enable' drivers/built-in.o: In function `disable_clock': clkdev.c:(.text+0x29778): undefined reference to `clk_disable' drivers/built-in.o: In function `__pm_clk_remove': clkdev.c:(.text+0x297f8): undefined reference to `clk_disable' drivers/built-in.o: In function `pm_clk_suspend': clkdev.c:(.text+0x29bc8): undefined reference to `clk_disable' drivers/built-in.o: In function `pm_clk_resume': clkdev.c:(.text+0x29c28): undefined reference to `clk_enable' make[2]: *** [vmlinux] Error 1 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 In addition, eliminate Zynq's "use" of the versatile platform, as it is no longer needed. As Nick Bowler points out: For the record, I think this was introduced by commit 56a34b03ff427 ("ARM: versatile: Make plat-versatile clock optional") which forgot to select PLAT_VERSATILE_CLOCK on Zynq. This is not all that surprising, because the fact that Zynq "uses" PLAT_VERSATILE is secretly hidden in the Makefile. Nevertheless, the only feature from versatile that Zynq needed was the clock support, so this patch should *also* delete the secret use of plat-versatile by removing this line from arch/arm/Makefile: plat-$(CONFIG_ARCH_ZYNQ) += versatile Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-15ARM: imx: merge plat-mxc into mach-imxShawn Guo
It's really unnecessary to have plat-mxc, and let's merge it into mach-imx. It's pretty much just a bunch of file renaming and Kconfig/Makefile merge. To make the change less invasive, we keep using Kconfig symbol CONFIG_ARCH_MXC for mach-imx sub-architecture. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-09ARM: pass -marm to gcc by default for both C and assemblerArnd Bergmann
The Linaro cross toolchain and probably others nowadays default to building in THUMB2 mode. When building a kernel for a CPU that does not support THUMB2, the compiler complains about incorrect flags. We can work around this by setting -marm for all non-T2 builds. -marm was passed unconditionally for C files previously, but nothing was passed to the gcc frontend when processing .S files, resulting in a warning. The assembler never defaults to ARM unless -Wa,-mthumb is supplied explicitly, so the files were still assembled correctly. This patch makes sure that -marm is passed for .S files too, and also avoids the redundant gcc -marm -mthumb in Thumb kernels. Without this patch, building assabet_defconfig results in: usr/initramfs_data.S:1:0: warning: target CPU does not support THUMB instructions [enabled by default] arch/arm/nwfpe/entry.S:1:0: warning: target CPU does not support THUMB instructions [enabled by default] firmware/cis/PCMLM28.cis.gen.S:1:0: warning: target CPU does not support THUMB instructions [enabled by default] (and many more) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Dave Martin <dave.martin@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-07Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "This is the first chunk of ARM updates for this merge window. Conflicts are expected in two files - asm/timex.h and mach-integrator/integrator_cp.c. Nothing particularly stands out more than anything else. Most of the growth is down to the opcodes stuff from Dave Martin, which is countered by Rob's patches to use more of the asm-generic headers on ARM." (A few more conflicts grew since then, but it all looked fairly trivial) * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (44 commits) ARM: 7548/1: include linux/sched.h in syscall.h ARM: 7541/1: Add ARM ERRATA 775420 workaround ARM: ensure vm_struct has its phys_addr member filled in ARM: 7540/1: kexec: Check segment memory addresses ARM: 7539/1: kexec: scan for dtb magic in segments ARM: 7538/1: delay: add registration mechanism for delay timer sources ARM: 7536/1: smp: Formalize an IPI for wakeup ARM: 7525/1: ptrace: use updated syscall number for syscall auditing ARM: 7524/1: support syscall tracing ARM: 7519/1: integrator: convert platform devices to Device Tree ARM: 7518/1: integrator: convert AMBA devices to device tree ARM: 7517/1: integrator: initial device tree support ARM: 7516/1: plat-versatile: add DT support to FPGA IRQ ARM: 7515/1: integrator: check PL010 base address from resource ARM: 7514/1: integrator: call common init function from machine ARM: 7522/1: arch_timers: register a time/cycle counter ARM: 7523/1: arch_timers: enable the use of the virtual timer ARM: 7531/1: mark kernelmode mem{cpy,set} non-experimental ARM: 7520/1: Build dtb files in all target ARM: Fix build warning in arch/arm/mm/alignment.c ...
2012-10-06Merge tag 'stable/for-linus-3.7-arm-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull ADM Xen support from Konrad Rzeszutek Wilk: Features: * Allow a Linux guest to boot as initial domain and as normal guests on Xen on ARM (specifically ARMv7 with virtualized extensions). PV console, block and network frontend/backends are working. Bug-fixes: * Fix compile linux-next fallout. * Fix PVHVM bootup crashing. The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports ARMv7 platforms. The goal in implementing this architecture is to exploit the hardware as much as possible. That means use as little as possible of PV operations (so no PV MMU) - and use existing PV drivers for I/Os (network, block, console, etc). This is similar to how PVHVM guests operate in X86 platform nowadays - except that on ARM there is no need for QEMU. The end result is that we share a lot of the generic Xen drivers and infrastructure. Details on how to compile/boot/etc are available at this Wiki: http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions and this blog has links to a technical discussion/presentations on the overall architecture: http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/ * tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits) xen/xen_initial_domain: check that xen_start_info is initialized xen: mark xen_init_IRQ __init xen/Makefile: fix dom-y build arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls ...
2012-10-04Merge branches 'atags', 'cache-l2x0', 'clkdev', 'fixes', 'integrator', ↵Russell King
'misc', 'opcodes' and 'syscall' into for-linus
2012-10-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto update from Herbert Xu: - Optimised AES/SHA1 for ARM. - IPsec ESN support in talitos and caam. - x86_64/avx implementation of cast5/cast6. - Add/use multi-algorithm registration helpers where possible. - Added IBM Power7+ in-Nest support. - Misc fixes. Fix up trivial conflicts in crypto/Kconfig due to the sparc64 crypto config options being added next to the new ARM ones. [ Side note: cut-and-paste duplicate help texts make those conflicts harder to read than necessary, thanks to git being smart about minimizing conflicts and maximizing the common parts... ] * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits) crypto: x86/glue_helper - fix storing of new IV in CBC encryption crypto: cast5/avx - fix storing of new IV in CBC encryption crypto: tcrypt - add missing tests for camellia and ghash crypto: testmgr - make test_aead also test 'dst != src' code paths crypto: testmgr - make test_skcipher also test 'dst != src' code paths crypto: testmgr - add test vectors for CTR mode IV increasement crypto: testmgr - add test vectors for partial ctr(cast5) and ctr(cast6) crypto: testmgr - allow non-multi page and multi page skcipher tests from same test template crypto: caam - increase TRNG clocks per sample crypto, tcrypt: remove local_bh_disable/enable() around local_irq_disable/enable() crypto: tegra-aes - fix error return code crypto: crypto4xx - fix error return code crypto: hifn_795x - fix error return code crypto: ux500 - fix error return code crypto: caam - fix error IDs for SEC v5.x RNG4 hwrng: mxc-rnga - Access data via structure hwrng: mxc-rnga - Adapt clocks to new i.mx clock framework crypto: caam - add IPsec ESN support crypto: 842 - remove .cra_list initialization Revert "[CRYPTO] cast6: inline bloat--" ...
2012-09-28Merge branch 'bcmring/removal' into next/multiplatformArnd Bergmann
The removal of bcmring has non-obvious commits with the way the multiplatform configuration works, so merge it in here. Conflicts: arch/arm/Kconfig arch/arm/Makefile arch/arm/mach-bcmring/arch.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28ARM: Remove mach-bcmringArnd Bergmann
Remove mach-bcmring as this is no longer maintained or used. Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Jiandong Zheng <jdzheng@broadcom.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-21Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson
into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21Merge branch 'next/soc' into next/multiplatformOlof Johansson
* next/soc: (50 commits) ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ARM: tegra30: add CPU hotplug support ARM: tegra: clean up the common assembly macros into sleep.h ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_ops ARM: tegra: introduce tegra_cpu_car_ops structures ARM: Tegra: Add smp_twd clock for Tegra20 ARM: AM33XX: clock: Add dcan clock aliases for device-tree ARM: OMAP2+: dpll: Add missing soc_is_am33xx() check for common functions ARM: OMAP: omap_device: idle devices with no driver bound ARM: OMAP: omap_device: don't attempt late suspend if no driver bound ARM: OMAP: omap_device: keep track of driver bound status ARM: OMAP3+: hwmod: Add AM33XX HWMOD data ARM: OMAP2+: hwmod: Hook-up am33xx support in omap_hwmod framework ... Change/remove conflict in arch/arm/mach-ux500/clock.c resolved. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21Merge tag 'tegra-for-3.7-dmaengine' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup ARM: tegra: switch to dmaengine The Tegra code-base has contained both a legacy DMA and a dmaengine driver since v3.6-rcX. This series flips Tegra's defconfig to enable dmaengine rather than the legacy driver, and removes the legacy driver and all client code. * tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ASoC: tegra: remove support of legacy DMA driver based access spi: tegra: remove support of legacy DMA driver based access ARM: tegra: apbio: remove support of legacy DMA driver based access ARM: tegra: dma: remove legacy APB DMA driver ARM: tegra: config: enable dmaengine based APB DMA driver + sync to 3.6-rc6
2012-09-20ARM: add infra-structure for BCM2835 and Raspberry PiSimon Arlott
The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic support for this SoC. http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Note that the documentation in the latter .pdf assumes the MMU setup that's used on the "VideoCore" companion processor, and does not document physical peripheral addresses. Subtract 0x5e000000 to obtain the physical addresses. This is accounted for by the ranges property in the /soc node in the device tree. The BCM2835 SoC is used in the Raspberry Pi. This patch also adds a minimal device tree for this board; enough to see some very early kernel boot messages through earlyprintk. However, this patch does not yet provide a useful booting system. http://www.raspberrypi.org/. This patch was extracted from git://github.com/lp0/linux.git branch rpi-split from 3-4 months ago, and significantly stripped down and modified since. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dom Cobley <dc4@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-15ARM: 7520/1: Build dtb files in all targetAndrew Lunn
Tools like kisskb are good at finding build regressions in the kernel sources. However, regressions in the DT desscriptions are not found, because generally these build systems don't build the DT binary blobs. Extend the ARM all target to build all enabled DTB files. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Dave Martin <dave.martin@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-14ARM: initial multiplatform supportRob Herring
This lets us build a multiplatform kernel for experimental purposes. However, it will not be useful for any real work, because it relies on a number of useful things to be disabled for now: * SMP support must be turned off because of conflicting symbols. Marc Zyngier has proposed a solution by adding a new SOC operations structure to hold indirect function pointers for these, but that work is currently stalled * We turn on SPARSE_IRQ unconditionally, which is not supported on most platforms. Each of them is currently in a different state, but most are being worked on. * A common clock framework is in place since v3.4 but not yet being used. Work on this is on its way. * DEBUG_LL for early debugging is currently disabled. * THUMB2_KERNEL does not work with allyesconfig because the kernel gets too big [Rob Herring]: Rebased to not be dependent on the mass mach header rename. As a result, omap2plus, imx, mxs and ux500 are not converted. Highbank, picoxcell, mvebu, and socfpga are converted. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Acked-by: Jamie Iles <jamie@jamieiles.com> Cc: Dinh Nguyen <dinguyen@altera.com>
2012-09-07ARM: 7513/1: Make sure dtc is built before running itDavid Brown
'make dtbs' in a clean tree will try running the dtc before actually building it. Make these rules depend upon the scripts to build it. Cc: <stable@vger.kernel.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-06arm/crypto: Add optimized AES and SHA1 routinesDavid McCullough
Add assembler versions of AES and SHA1 for ARM platforms. This has provided up to a 50% improvement in IPsec/TCP throughout for tunnels using AES128/SHA1. Platform CPU SPeed Endian Before (bps) After (bps) Improvement IXP425 533 MHz big 11217042 15566294 ~38% KS8695 166 MHz little 3828549 5795373 ~51% Signed-off-by: David McCullough <ucdevel@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-26ARM: mach-pnx4008: Remove architectureRoland Stigge
This patch removes the ARM architecture mach-pnx4008. No direct support or user feedback since 2006. Acknowledgements from NXP/Philips and Linux arm-soc maintainers. Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-09-14arm: initial Xen supportStefano Stabellini
- Basic hypervisor.h and interface.h definitions. - Skeleton enlighten.c, set xen_start_info to an empty struct. - Make xen_initial_domain dependent on the SIF_PRIVILIGED_BIT. The new code only compiles when CONFIG_XEN is set, that is going to be added to arch/arm/Kconfig in patch #11 "xen/arm: introduce CONFIG_XEN on ARM". Changes in v3: - improve comments. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-27Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "First ARM push of this merge window, post me coming back from holiday. This is what has been in linux-next for the last few weeks. Not much to say which isn't described by the commit summaries." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) ARM: 7463/1: topology: Update cpu_power according to DT information ARM: 7462/1: topology: factorize the update of sibling masks ARM: 7461/1: topology: Add arch_scale_freq_power function ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit} ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace ARM: 7452/1: delay: allow timer-based delay implementation to be selected ARM: 7451/1: arch timer: implement read_current_timer and get_cycles ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process ARM: 7444/1: kernel: add arch-timer C3STOP feature ARM: 7460/1: remove asm/locks.h ARM: 7439/1: head.S: simplify initial page table mapping ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE ARM: 7436/1: Do not map the vectors page as write-through on UP systems ...
2012-07-19ARM: socfpga: initial support for Altera's SOCFPGA platformDinh Nguyen
Adding core definitions for Altera's SOCFPGA ARM platform. Mininum support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-10arm: mach-mvebu: add compilation/configuration changeGregory CLEMENT
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Lior Amsalem <alior@marvell.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Yehuda Yitschak <yehuday@marvell.com> Tested-by: Lior Amsalem <alior@marvell.com>
2012-06-03ARM: 7420/1: Improve build environment isolationVincent Sanders
Increasingly distributions are setting default build environments to have LDFLAGS with hardening options. There seems to be an assumption with those options that LDFLAGS are passed to the compiler frontend rather than used directly with ld (which the kernel build process assumes) To prevent build failures in such environments this patch changes the ARM architecture Makefile to override the LDFLAGS from the environment similar to the behaviour on other common architectures e.g. x86 Signed-off-by: Vincent Sanders <vince@collabora.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-26Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc: soc specific changes (part 2) from Olof Johansson: "This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch." Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much worse than they are: the exonys5 init code was refactored in commit fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a new gpio chip define and did tiny updates to the init code. So the conflict diff looks like hell, but it's actually a fairly simple change. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: fix building with CONFIG_OF disabled ARM: EXYNOS: Add AUXDATA for i2c controllers ARM: dts: Update device tree source files for EXYNOS5250 ARM: EXYNOS: Add device tree support for interrupt combiner ARM: EXYNOS: Add irq_domain support for interrupt combiner ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5 ARM: EXYNOS: update irqs for EXYNOS5250 SoC ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll ARM: EXYNOS: add GPC4 bank instance ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition ARM: EXYNOS: Modify the GIC physical address for static io-mapping ARM: EXYNOS: Add watchdog timer clock instance pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res SPEAr: Update MAINTAINERS and Documentation SPEAr13xx: Add defconfig SPEAr13xx: Add compilation support SPEAr13xx: Add dts and dtsi files pinctrl: Add SPEAr13xx pinctrl drivers pinctrl: SPEAr: Create macro for declaring GPIO PINS SPEAr13xx: Add common clock framework support ...
2012-05-26Merge tag 'cleanup2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc cleanups (part 2) from Olof Johansson: "More cleanups, continuing an earlier set with omap and samsung specific cleanups. These could not go into the first set because they have dependencies on various other series that in turn depend on the first cleanups." Fixed up conflicts in arch/arm/plat-omap/counter_32k.c due to commit bd0493eaaf5c: "move read_{boot,persistent}_clock to the architecture level" that changed how the persistent clocks were handled. And trivial conflicts in arch/arm/mach-omap1/common.h due to just independent changes close to each other. * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) ARM: SAMSUNG: merge plat-s5p into plat-samsung ARM: SAMSUNG: move options for common s5p into plat-samsung/Kconfig ARM: SAMSUNG: move setup code for s5p mfc and mipiphy into plat-samsung ARM: SAMSUNG: move platform device for s5p uart into plat-samsung ARM: SAMSUNG: move hr timer for common s5p into plat-samsung ARM: SAMSUNG: move pm part for common s5p into plat-samsung ARM: SAMSUNG: move interrupt part for common s5p into plat-samsung ARM: SAMSUNG: move clock part for common s5p into plat-samsung ARM: S3C24XX: Use common macro to define resources on dev-uart.c ARM: S3C24XX: move common clock init into common.c ARM: S3C24XX: move common power-management code to mach-s3c24xx ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c ARM: S3C24XX: move plat-s3c24xx/cpu.c ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX GPMC: add ECC control definitions ARM: OMAP2+: dmtimer: remove redundant sysconfig context restore ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx ARM: OMAP: AM35xx: remove redunant cpu_is checks for AM3505 ARM: OMAP1: Pass dma request lines in platform data to MMC driver ...
2012-05-22Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull first batch of arm-soc cleanups from Olof Johansson: "These cleanups are basically all over the place. The idea is to collect changes with minimal impact but large number of changes so we can avoid them from distracting in the diffstat in the other series. A significant number of lines get removed here, in particular because the ixp2000 and ixp23xx platforms get removed. These have never been extremely popular and have fallen into disuse over time with no active maintainer taking care of them. The u5500 soc never made it into a product, so we are removing it from the ux500 platform. Many good cleanups also went into the at91 and omap platforms, as has been the case for a number of releases." Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx} * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits) ARM: clps711x: Cleanup IRQ handling ARM clps711x: Removed unused header mach/time.h ARM: clps711x: Added note about support EP731x CPU to Kconfig ARM: clps711x: Added missing register definitions ARM: clps711x: Used own subarch directory for store header file Dove: Fix Section mismatch warnings ARM: orion5x: ts78xx debugging changes ARM: orion5x: remove PM dependency from ts78xx ARM: orion5x: ts78xx fix NAND resource off by one ARM: orion5x: ts78xx whitespace cleanups Orion5x: Fix Section mismatch warnings Orion5x: Fix warning: struct pci_dev declared inside paramter list ARM: clps711x: Combine header files into one for clps711x-targets ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c ARM: S3C24XX: Use common macro to define resources on mach-osiris.c ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c ARM: S5PV210: Use common macro to define resources on dev-audio.c ARM: S5PC100: Use common macro to define resources on dev-audio.c ARM: S5P64X0: Use common macro to define resources on dev-audio.c ...
2012-05-22Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug cleanups from Thomas Gleixner: "This series is merily a cleanup of code copied around in arch/* and not changing any of the real cpu hotplug horrors yet. I wish I'd had something more substantial for 3.5, but I underestimated the lurking horror..." Fix up trivial conflicts in arch/{arm,sparc,x86}/Kconfig and arch/sparc/include/asm/thread_info_32.h * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits) um: Remove leftover declaration of alloc_task_struct_node() task_allocator: Use config switches instead of magic defines sparc: Use common threadinfo allocator score: Use common threadinfo allocator sh-use-common-threadinfo-allocator mn10300: Use common threadinfo allocator powerpc: Use common threadinfo allocator mips: Use common threadinfo allocator hexagon: Use common threadinfo allocator m32r: Use common threadinfo allocator frv: Use common threadinfo allocator cris: Use common threadinfo allocator x86: Use common threadinfo allocator c6x: Use common threadinfo allocator fork: Provide kmemcache based thread_info allocator tile: Use common threadinfo allocator fork: Provide weak arch_release_[task_struct|thread_info] functions fork: Move thread info gfp flags to header fork: Remove the weak insanity sh: Remove cpu_idle_wait() ...
2012-05-16Merge branch 'samsung/cleanup-plat-s5p' into next/soc2Arnd Bergmann
2012-05-14Merge branch 'next/cleanup-plat-s3c24xx-s5p' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup2 Kukjin Kim <kgene.kim@samsung.com> writes: We can remove plat-s5p directory with this series and I think, the plat-s3c24xx can be removed next time for one plat-samsung of Samsung stuff. Note, this is including cleanup-samsung-iommu which is removing s5p iommu stuff in plat-s5p. * 'next/cleanup-plat-s3c24xx-s5p' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: merge plat-s5p into plat-samsung ARM: SAMSUNG: move options for common s5p into plat-samsung/Kconfig ARM: SAMSUNG: move setup code for s5p mfc and mipiphy into plat-samsung ARM: SAMSUNG: move platform device for s5p uart into plat-samsung ARM: SAMSUNG: move hr timer for common s5p into plat-samsung ARM: SAMSUNG: move pm part for common s5p into plat-samsung ARM: SAMSUNG: move interrupt part for common s5p into plat-samsung ARM: SAMSUNG: move clock part for common s5p into plat-samsung ARM: S3C24XX: Use common macro to define resources on dev-uart.c ARM: S3C24XX: move common clock init into common.c ARM: S3C24XX: move common power-management code to mach-s3c24xx ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c ARM: S3C24XX: move plat-s3c24xx/cpu.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14SPEAr13xx: Add compilation supportViresh Kumar
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
2012-05-12ARM: SAMSUNG: merge plat-s5p into plat-samsungKukjin Kim
Since just plat-samsung can support all of Samsung stuff so that there is no more need to keep the plat-s5p for S5P SoCs. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-08ARM: All OMAP2PLUS machines use omap2 directory so just add one entrySantosh Shilimkar
All OMAP2PLUS arch based machines makes use of mach-omap2 directory. So just add one entry so that there is no need to patch this file for any OMAP2+ devices. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-05arm: Use generic init_taskThomas Gleixner
Same code. Use the generic version. The special Makefile treatment is pointless anyway as init_task.o contains only data which is handled by the linker script. So no point on being treated like head text. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Russell King <linux@arm.linux.org.uk> Link: http://lkml.kernel.org/r/20120503085034.221811388@linutronix.de
2012-05-05ARM: Remove support for ARMv3 ARM610 and ARM710 CPUsRussell King
This patch removes support for ARMv3 CPUs, which haven't worked properly for quite some time (see the FIXME comment in arch/arm/mm/fault.c). The only V3 parts left is the cache model for ARMv3, which is needed for some odd reason by ARM740T CPUs, and being able to build with -march=armv3, which is required for the RiscPC platform due to its bus structure. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-06ARM: remove ixp23xx and ixp2000 platformsRob Herring
ixp2xxx platforms have had no real changes since ~2006 and the maintainer has said on irc that they can be removed: 13:05 < nico> do you still care about ixp2000? 13:22 < lennert> not really, no 13:58 < nico> do you think we could remove it from the kernel tree? 14:01 < lennert> go for it, and remove ixp23xx too while you're at it Removing will help simplify ARM consolidation in general and PCI re-work specifically. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2012-03-29Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull more ARM updates from Russell King. This got a fair number of conflicts with the <asm/system.h> split, but also with some other sparse-irq and header file include cleanups. They all looked pretty trivial, though. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits) ARM: fix Kconfig warning for HAVE_BPF_JIT ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds ARM: 7349/1: integrator: convert to sparse irqs ARM: 7259/3: net: JIT compiler for packet filters ARM: 7334/1: add jump label support ARM: 7333/2: jump label: detect %c support for ARM ARM: 7338/1: add support for early console output via semihosting ARM: use set_current_blocked() and block_sigmask() ARM: exec: remove redundant set_fs(USER_DS) ARM: 7332/1: extract out code patch function from kprobes ARM: 7331/1: extract out insn generation code from ftrace ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format ARM: 7351/1: ftrace: remove useless memory checks ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path ARM: Versatile Express: add NO_IOPORT ARM: get rid of asm/irq.h in asm/prom.h ARM: 7319/1: Print debug info for SIGBUS in user faults ARM: 7318/1: gic: refactor irq_start assignment ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop ARM: 7315/1: perf: add support for the Cortex-A7 PMU ...