summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2015-09-23QorIQ/TMU: add TMU node to device tree for LS1021AJia Hongtao
The Thermal Monitoring Unit node for LS1021A. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
2015-07-10arm: dts: ls1021a: Add transfer mode property in DSPI2 nodeHaikun Wang
DSPI new driver can select transfer mode(tcfq/eoq) to work. The property will be read from dtsi node. Add the property tcfq-mode for LS1021a. Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Change-Id: I09efa9277364b79d075a1de94bd04111e2434576 Reviewed-on: http://git.am.freescale.net:8181/39515 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-07-10arm: dts: ls1021atwr: Enable DSPI2 dts nodeHaikun Wang
Erratum A-008022 has been fixed on LS1021A Rev2.0. So we can use DSPI2 now, this patch enable DSPI2 in dts for LS1021ATWR. Signed-off-by: Haikun Wang <haikun.wang@freescale.com> Change-Id: I00c76415c155a290eecbde8b37e6148b11ed2c07 Reviewed-on: http://git.am.freescale.net:8181/39514 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-07-03arm/dts: Add node for ina220 on LS1021ATWR-RevYuan Yao
Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Change-Id: Iae6ec5f13ae85e26c2bf50efe55e81d91eba3d8d Reviewed-on: http://git.am.freescale.net:8181/39246 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-16arm/dts: Add nodes for flexcan devices present on LS1021A-Rev2 SoCBhupesh Sharma
This patch adds the device nodes for flexcan controller(s) present on LS1021A-Rev2 SoC. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Sakar Arora <Sakar.Arora@freescale.com> Change-Id: Ia301d4db49d337e37def2e6667b6e4e1586fd8fc Reviewed-on: http://git.am.freescale.net:8181/38096 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-03ls1021a: dts: Add eTSEC info for 2nd interrupt groupsClaudiu Manoil
Enable support for the second interrupt group register block and the corresponding Rx/Tx/Err interrupt sources, for each eTSEC node. Fix following non-critical issues and inconsistencies: - eTSEC can support 8 H/W queues, show this in the device tree; - remove "fsl,[r|t]x-bit-map" properties, they are obsoleted; - register block size is 0x1000 (4kB memory page), not 0x8000; - reg property has 2 "address" and resp. 2 "size" cells, not 1; - use register block address as queue-group id for consistency; Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Change-Id: Iada02221d1f3e06cc019a7b067c9b676c7c0b77d Reviewed-on: http://git.am.freescale.net:8181/37273 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-05-29ls102xa: nor: Adjust the partition for NOR flash according to the newAlison Wang
mapping table According to the new mapping table, the partition for NOR flash is adjusted. Signed-off-by: Alison Wang <alison.wang@freescale.com> Change-Id: Id535115a4ac53aeadd4c144425800fc566ab76b8 Reviewed-on: http://git.am.freescale.net:8181/37068 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-05-25arm: ls1021a: add deep sleep support on TWR-LS1021A-PBChenhui Zhao
Add deep sleep support on TWR-LS1021A-PB, which has CPLD on board instead of FPGA. Enable the ftm0 node in .dts to enable wake-on-Flextimer feature. Change-Id: I0b1234cdd80d852140964240234576705764cd89 Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36250 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Dongsheng Wang <dongsheng.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-05-19ls102xa: dts: Remove big-endian-regs property for SAIAlison Wang
As SAI's registers are configured as little-endian mode, big-endian-regs property is not needed. Signed-off-by: Alison Wang <alison.wang@freescale.com> Change-Id: Ibcd07bbdc1a3fa4e738e9e20c977f35405f54d32 Reviewed-on: http://git.am.freescale.net:8181/36160 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-05-19ls102xa: nor: Adjust the partition for NOR flashAlison Wang
As the load address of U-Boot for NOR boot is changed, the partition for NOR flash is adjusted accordingly. Signed-off-by: Alison Wang <alison.wang@freescale.com> Change-Id: Ibf71d76071c78784f651f8e00a7dc65c2cfc5b75 Reviewed-on: http://git.am.freescale.net:8181/36373 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-03-30arm:dts:ls1021a : Add configure-gfladj property to USB3 nodeNikhil Badola
Add "configure-gfladj" boolean property to USB3 node. This property is used to determine whether frame length adjustent is required or not Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Change-Id: Iab5ad0062acdbc03035d2ca98de071a52074e844 Reviewed-on: http://git.am.freescale.net:8181/33663 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-19Merge branch 'qoriq-sdk' into LS1-SDKJason Jin
2015-03-03arm: ls1021a: added SATA supportAlison Wang
Added SATA device node and enabled AHCI config by default. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Change-Id: I288e6bffea28ea31804e20190dfa6b580fa2d7eb Reviewed-on: http://git.am.freescale.net:8181/31841 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-02-13Merge branch 'rtmerge'Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Conflicts: arch/arm/kvm/mmu.c arch/arm/mm/proc-v7-3level.S arch/powerpc/kernel/vdso32/getcpu.S drivers/crypto/caam/error.c drivers/crypto/caam/sg_sw_sec4.h drivers/usb/host/ehci-fsl.c
2015-02-13Reset to 3.12.37Scott Wood
2015-02-05ls1021aqds: dcu: Add HDMI hardware parameters in ls1021a-qds.dtsJianwei.wang
This patch adds HDMI hardware parameters in ls1021a-qds.dts for DCU on ls1021aqds board Signed-off-by: Jianwei.wang <b52261@freescale.com> Change-Id: Idde265ee04bbf5120483a621347fe5fd5a2a6e4c Reviewed-on: http://git.am.freescale.net:8181/29683 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-02-05arm: ls1021a: set wakeup devices dynamically for sleep/deep sleepChenhui Zhao
If a device works as a wakeup source, it will keep working in the peroid of sleep/deep sleep. This patch sets the wakeup devices according to the wakeup attribute of device. Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Change-Id: If49a8ad282115ac415fb03d0197964c5ae10c86d Reviewed-on: http://git.am.freescale.net:8181/29152 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Dongsheng Wang <dongsheng.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm: dts: ls1021a-twr: remove dspi1 node for cannot be verifiedJingchang Lu
The dspi1 is not availiable on LS1021A-R1.0, thus the node can't be verified. This patch removes the dspi1 node from the TWR board dts for consistent with this limitation. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: Ic9178b89c2cc78c3c805e999c8fa24817cbcb06f Reviewed-on: http://git.am.freescale.net:8181/25580 Reviewed-by: Huan Wang <alison.wang@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Chenhui Zhao <chenhui.zhao@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11ls1021a/dts: Add eTSEC1 as wake-up event sourceClaudiu Manoil
According to the H/W reference manual, eTSEC1 (EC1) is a valid wake-up event source. The supported wake-up events are magic packet and user defined packet (eTSEC filer). Change-Id: Ife1a0d1f0afcfa8641c6630cb12c9e40775b9e47 Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/24220 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11qspi: ls102xa: Adjust the size of QSPI AMBA Bus memory mapAlison Wang
This patch adjust the size of QSPI AMBA Bus memory map to 64M to avoid the issue that system default vmalloc size is not enough. Signed-off-by: Alison Wang <alison.wang@freescale.com> Change-Id: Ie917be03b0a0479f2c49dc02b9c36cb04ecc87c8 Reviewed-on: http://git.am.freescale.net:8181/24671 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
2014-12-11ls1020: Add crypto node alias in device treeRuchika Gupta
U-boot patches up the device tree crypto node for the era property. crypto node alias was missing in the ls1020 device trees. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Change-Id: I335cc0765a1f66c72d98bab737aab3012448bf18 Reviewed-on: http://git.am.freescale.net:8181/23508 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11PCI: Layerscape: Add num-atus property to PCIe dts nodeMinghuan Lian
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Change-Id: Iaf58815549266cde2d082e789c34a975259d854f Reviewed-on: http://git.am.freescale.net:8181/23497 Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com> Tested-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11arm:dts:ls1021ax:Remove qspi flash1 from dts nodeChao Fu
Remove qspi the second flash support for LS1 SDK. The QSPI driver was back-ported from the upstream QSPI driver. The upstream version does not support the reading/writing for the second flash chip. This patch removed the second flash support to avoid error information during kernel bringup. Signed-off-by: Chao Fu <B44548@freescale.com> Change-Id: I57b02083ebe8e9a34673243be74d8cfd1c80aa9d Reviewed-on: http://git.am.freescale.net:8181/22587 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11dts: ls1: fix network issueChenhui Zhao
Added the compatible "simple-bus" to fix the problem. Change-Id: I629a6f5c54f51dbe18c65c2ff8cdc6e97bb0ed0f Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/22481 Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11dts: ls1021a: add the RCPM node and change FPGA's compatibleChenhui Zhao
Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Change-Id: Ib0ecd4424f3d356fe1bcd687d3befd61527be5ab Reviewed-on: http://git.am.freescale.net:8181/21974 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm:dts:ls1021aqds: reduce the frequency for dspi flashChao Fu
Dspi flash is at45db021d on ls1021aqds board. Reduce its frequency to improve the data transfer stability. Signed-off-by: Chao Fu <B44548@freescale.com> Change-Id: If4e4d03d52fc28dea2dca3e6c6872024d3d1229a Reviewed-on: http://git.am.freescale.net:8181/21973 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm:dtsi:ls1021a:Add the DSPI transfer mode property in DSPI nodeChao Fu
DSPI new driver can select transfer mode(tcfq/eoq) to work. The property will be read from dtsi node. Add the property tcfq-mode for LS1021a. Signed-off-by: Chao Fu <B44548@freescale.com> Change-Id: Ib659338777a4a8a5fdef7914c556c3ca8b4c483d Reviewed-on: http://git.am.freescale.net:8181/21908 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11audio: dts: Add dts nodes on LS1021AQDS/TWRAlison Wang
This patch adds dts nodes for audio support on LS1021AQDS/TWR. Signed-off-by: Alison Wang <alison.wang@freescale.com> Change-Id: I5e98a2377a7230598401ad932c4016951435b240 Reviewed-on: http://git.am.freescale.net:8181/21061 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11dts: ls1021a: updated the soc nodeTang Yuantian
Added device_type property to soc node to facilitate its use. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Change-Id: I4c50770215608f8ca718e78072a28f69afdf1bc2 Reviewed-on: http://git.am.freescale.net:8181/21690 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11dts: ls1021a: updated the clockgen nodeTang Yuantian
Fixed some error in clockgen node. This patch also added clock source to CPU nodes to support CPU frequency switch dynamically. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Change-Id: I2d40c3bc9c766d62d9cb8a3c00b9d5e1c2e65f41 Reviewed-on: http://git.am.freescale.net:8181/21689 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ls1021aqds: add qe node to ls1021aqds dtsZhao Qiang
add qe node(qe-tdm and qe-uart) into ls1021a-qds.dts Signed-off-by: Zhao Qiang <B45475@freescale.com> Change-Id: I1ab52c2330246e807fd4c96103d2c063b6d8d8ba Reviewed-on: http://git.am.freescale.net:8181/21868 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ls1021a/dts: Add device nodes for FlexCAN IP instancesBhupesh Sharma
This patch adds the device nodes for 4 FlexCAN IP instances available on LS1021A SoC in the ls1021a.dtsi file and enables only the first two instances which are supported on the QDS board in ls1021a-qds.dts file. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> --- Previous version of this patch under review upstream: http://patchwork.ozlabs.org/patch/363588/ Will re-spin the patch with the DTS Change-Id: I592e5f8562ad173801a53433aec9a91b00ba8bb0 Reviewed-on: http://git.am.freescale.net:8181/21855 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm/dts/ls1021a: Add GPIO controller nodesShaveta Leekha
Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Change-Id: Ib16b8e2466757d782ec4bb5e8549f2dcb9208e32 Reviewed-on: http://git.am.freescale.net:8181/21801 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm:dts:ls1021a-twr:correct qspi flash informationChao Fu
Correct qspi flash information on ls1021a-qds board. And remove flash partion in node, it is not useful. Signed-off-by: Chao Fu <B44548@freescale.com> Change-Id: I8b2dc47446c5d54ce12e3d7d138fa9d9a3b9ba6c Reviewed-on: http://git.am.freescale.net:8181/21364 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm:dts:ls1021a-qds:correct qspi flash informationChao Fu
Correct qspi flash information on ls1021a-qds board. And remove flash partion in node, it is not useful. Signed-off-by: Chao Fu <B44548@freescale.com> Change-Id: Ib9b3964127984457032f73be53bbfc847cf438bf Reviewed-on: http://git.am.freescale.net:8181/21360 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm:dts:ls1021a:add qspi-memory address and correct qspi compatibleChao Fu
The new QSPI driver add DDR read mode, so add qspi-memory map for QSPI access in DDR mode in dts node. Modify qspi node compatible for LS1 paltform. Signed-off-by: Chao Fu <b44548@freescale.com> Change-Id: Ia92dda63bf857b845767ae62f2c7eb9a84371aa1 Reviewed-on: http://git.am.freescale.net:8181/21356 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11fb: dcu: convert to use regmap API.Xiubo Li
The regmap framework has one feature of register cache, which will be more easy to add big endian mode and PM support. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> -- The first DRM version will be send out to the community before 15 Dec 2014. Change-Id: I3aa3c30f4ab42b64b80669b483b45a62ae31d6bb Reviewed-on: http://git.am.freescale.net:8181/21571 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Dongsheng Wang <dongsheng.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm: dts: ls1021a-twr: add SII9022A HDMI DT nodeXiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- The first DRM version will be send out to the community before 30 November 2014. Change-Id: Ia5538da4db87431fd80ffaacc07c201d20a8bc2b Reviewed-on: http://git.am.freescale.net:8181/19651 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ARM: dts: ls1021a: Add DCU nodeXiubo Li
This patch adds DCU node in SoC level DTS for Freescale LS1021A-TWR. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- The first DRM version will be send out to the community before 30 November 2014. Change-Id: I74671a92d530699be6868f7f1591eadbd40a6879 Reviewed-on: http://git.am.freescale.net:8181/19649 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11dtsi: ls1021a: Add 40-bit dt node support for DCU.Xiubo Li
Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> --- The first DRM version will be send out to the community before 30 November 2014. Change-Id: I6a20f9f5c1b8b8c596e635b25aa37055e23f82a7 Reviewed-on: http://git.am.freescale.net:8181/19648 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ls1021a-twr/qe: add qe node to ls1-twrZhao Qiang
add qe node to ls1021atwr fdt. Signed-off-by: Zhao Qiang <B45475@freescale.com> --- upstream link: http://patchwork.ozlabs.org/patch/398470/ it is under discussion. Change-Id: I4f0bc40003265f85bde01a9982ef7f91edd1d08e Reviewed-on: http://git.am.freescale.net:8181/21121 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm:dts:ls1021a: add PCIe device nodeMinghuan Lian
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Change-Id: I5deb88a99bd7b5d40251a4935d4d8a556abad7ae Reviewed-on: http://git.am.freescale.net:8181/19712 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11Add LTC2945 node to ls1021a-twr.dtsJia Hongtao
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Change-Id: I08008c3dcd2b85b0c54b9f9ee939287f57745517 Reviewed-on: http://git.am.freescale.net:8181/19641 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm: dts: ls1021a: add wakeup device ftm0 node for ls1021aWang Dongsheng
Add ftm0 node, cause of ftm0 can be set as a alarm before system going to deep sleep. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Change-Id: Ie337ec554f6acd625cd691a0e07ffb96807cfa10 Reviewed-on: http://git.am.freescale.net:8181/19838 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm : dts : ls1021a : Modify USB3.0 dts nodeSuresh Gupta
Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Change-Id: I7aa37e4914623a303eb520c6d8fd6d4f84e9ddb2 Reviewed-on: http://git.am.freescale.net:8181/19815 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm : dts : ls1021a : Remove unwanted code from USB2.0 dts nodeNikhil Badola
Remove #address-cells and #size-cells from USB 2.0 node in ls1021a Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Change-Id: Ia2ff9aea201ef18b352437bda267571c235db689 Reviewed-on: http://git.am.freescale.net:8181/15675 Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm: dts: ls1021a: add alias for the clockgen sysclk nodeJingchang Lu
This add an alias named sysclk for the sysclk node for fdt fixup procedure locating it uniquely. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: I7e6bd6cb4d81fe44c73944be91cab3fe56810094 Reviewed-on: http://git.am.freescale.net:8181/19199 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm: dts: ls1021a: change sysclk compatible to "fixed-clock"Jingchang Lu
The sysclk could be well probed by "fixed-clock" compatible, no custom compatible is needed any more. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: I17a21e20ced4304e716e5a9ba07ff56b2adb45a7 Reviewed-on: http://git.am.freescale.net:8181/17833 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm: dts: ls1021a: remove the tbi node from SoC level dtsJingchang Lu
remove the tbi node which will be added to boards level dts. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: I1b7893526e63d0207637f2ae0576c9d5f62a6a06 Reviewed-on: http://git.am.freescale.net:8181/17829 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11arm: dts: ls1021a-twr: add aliases for enet phyJingchang Lu
This add aliases for enet phy to make it be found easily in u-boot on dynamically change the enet "phy-handle" and "phy-connection-type" property. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: I60e19aa48856c9b9048415d1c8924b626d70332a Reviewed-on: http://git.am.freescale.net:8181/17831 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
generated by cgit v0.10.2 at 2024-06-27 21:17:08 (GMT)