summaryrefslogtreecommitdiff
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2015-02-13Reset to 3.12.37Scott Wood
2013-12-12ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16Olof Johansson
commit f39918eec72c841037f16475867dac1a2b0bfc01 upstream. Enable MMC/SD on the Broadcom mobile platforms, and increase the block minors from the default 8 to 16 (since the Broadcom board by default has root on the 8th partition). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03ARM: multi_v7_defconfig: add SDHCI for i.MXOlof Johansson
Turn on SDHCI for i.MX support so machines can boot with local rootfs on SD. Tested on a Wandboard Quad. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-09-18ARM: multi_v7: add HREFv60 to multi_v7 defconfigLinus Walleij
This is just a standard board for the Ux500, include it in the v7 multiplatform defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-17ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPATOlof Johansson
Without this, legacy platforms that can boot with a multiplatform kernel but that need the DTB to be appended, won't have a way to pass firmware-set bootargs to the kernel. This is needed to boot multi_v7_defconfig on snowball, for instance. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-09Merge tag 'late-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late before the merge window, or had dependencies on previous branches. Highlights: - ux500: misc. cleanup, fixup I2C devices - exynos: DT updates for RTC; PM updates - at91: DT updates for NAND; new platforms added to generic defconfig - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks - highbank: LPAE fixes, select necessary ARM errata - omap: PM fixes and improvements; OMAP5 mailbox support - omap: basic support for new DRA7xx SoCs" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: dts: vexpress: Add CCI node to TC2 device-tree ARM: EXYNOS: Skip C1 cpuidle state for exynos5440 ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 ARM: highbank: clean-up some unused includes ARM: sun7i: Enable the A20 clocks in the DTSI ARM: sun6i: Enable clock support in the DTSI ARM: sun5i: dt: Use the A10s gates in the DTSI ARM: at91: at91_dt_defconfig: enable rm9200 support ARM: dts: add ADC device tree node for exynos5420/5250 ARM: dts: Add RTC DT node to Exynos5420 SoC ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC ARM: dts: Fix the RTC DT node name for Exynos5250 irqchip: mmp: avoid to include irqs head file ARM: mmp: avoid to include head file in mach-mmp irqchip: mmp: support irqchip irqchip: move mmp irq driver ARM: OMAP: AM33xx: clock: Add RNG clock data ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX ARM: OMAP4: clock: Lock PLLs in the right sequence ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS ...
2013-09-09Merge tag 'renesas-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman: "Lots of cleanup and refactoring and some SMP additions for Renesas platforms. Due to some inter-dependencies with other arm-soc branches, this Renesas stuff was separated out for sending after the other branches were merged. Highlights: - remove unused board support and cleanup of unused headers - refactoring of init and device registration - simplify IRQ initialization" * tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs ARM: shmobile: Introduce per-CPU SMP boot / sleep code ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779 ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0 ARM: shmobile: Add shared SCU CPU Hotplug code ARM: shmobile: Use shared SCU SMP boot code on emev2 ARM: shmobile: Use shared SCU SMP boot code on r8a7779 ARM: shmobile: Use shared SCU SMP boot code on sh73a0 ARM: shmobile: Introduce shared SCU SMP boot code ARM: shmobile: sh73a0: Remove global GPIO_NR definition ARM: shmobile: kzm9d: remove nfsroot settings from bootargs ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup ARM: shmobile: bockw: add missing __initdata ARM: shmobile: r8a7790: add missing __initdata ARM: shmobile: r8a7779: add missing __initdata ARM: shmobile: Remove unused shmobile_init_time() ARM: shmobile: Use clocksource_of_init() on r8a7790 ARM: shmobile: Use default ->init_time() on KZM9G DT ref ...
2013-09-06Merge tag 'boards-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches, but most of this is around legacy code and board support. We've found that platform maintainers have a hard time separating all of these out and might move towards fewer branches for next release. - Removal of a number of Marvell Kirkwood board files, since contents is now common and mostly configured via DT. - Device-tree updates for Marvell Dove, including irqchip and clocksource setup. - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager. - New backlight drivers for backlights used on Renesas shmobile platforms. - Removal of Renesas leds driver. - Shuffling of some of the new Broadcom platforms to give room for others in the same mach directory. More in 3.13" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: tegra: defconfig updates ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. ...
2013-09-06Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
2013-09-06Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK gpio: (gpio-pca953x) move header to linux/platform_data/ arm: zynq: hotplug: Remove unreachable code ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() tegra: simplify use of devm_ioremap_resource ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver ARM: mach-mvebu: remove redundant DT parsing and validation ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ...
2013-09-05Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series contains: - Exynos s5p-mfc driver got support for VP8 encoder - Some SoC drivers gained support for asynchronous registration (needed for DT) - The RC subsystem gained support for RC activity LED; - New drivers added: a video decoder(adv7842), a video encoder (adv7511), a new GSPCA driver (stk1135) and support for Renesas R-Car (vsp1) - the first SDR kernel driver: mirics msi3101. Due to some troubles with the driver, and because the API is still under discussion, it will be merged at staging for 3.12. Need to rework on it - usual new boards additions, fixes, cleanups and driver improvements" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits) [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0 [media] exynos4-is: Fix entity unregistration on error path [media] exynos-gsc: Register v4l2 device [media] exynos4-is: Fix fimc-lite bayer formats [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting [media] v4l: vsp1: Fix mutex double lock at streamon time [media] v4l: vsp1: Add support for RT clock [media] v4l: vsp1: Initialize media device bus_info field [media] davinci: vpif_capture: fix error return code in vpif_probe() [media] davinci: vpif_display: fix error return code in vpif_probe() [media] MAINTAINERS: add entries for adv7511 and adv7842 ...
2013-09-05Merge tag 'fbdev-3.12-omap-legacy-removal' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull OMAP specific fbdev changes from Tomi Valkeinen: "I've got this pull request separate from the main fbdev pull request, as this contains a bunch of OMAP board file changes and thus could possibly be rejected in case of bad conflicts. The removal of the old display drivers depend on the board file changes, so Tony Lindgren suggested taking them together via fbdev tree. These are in linux-next, and also Tony didn't see any conflicts with any of the branches he had, so they should go in clean. - Change the OMAP board files to use the new OMAP display drivers - Remove all the old drivers, and the related auxiliary code" * tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits) OMAPDSS: rename omap_dss_device's 'device' field to 'dst' OMAPDSS: rename omap_dss_device's 'output' to 'src' OMAPDSS: DSS: remove legacy dss bus support OMAPDSS: RFBI: remove code related to old panel model OMAPDSS: VENC: remove code related to old panel model OMAPDSS: SDI: remove code related to old panel model OMAPDSS: DSI: remove code related to old panel model OMAPDSS: HDMI: remove code related to old panel model OMAPDSS: DPI: remove code related to old panel model OMAPDSS: remove all old panel drivers OMAPDSS: DPI: change regulator handling OMAPDSS: SDI: change regulator handling OMAPDSS: fix DPI and SDI device ids OMAPDSS: remove omap_dss_device->channel field OMAPDSS: RFBI: Mark RFBI as broken ARM: OMAP2+: Remove old display drivers from omap2plus_defconfig ARM: OMAP: AM3517EVM: use new display drivers ARM: OMAP: Zoom: use new display drivers ARM: OMAP: Pandora: use new display drivers ARM: OMAP: OMAP3EVM: use new display drivers ...
2013-09-05Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Gleb Natapov: "The highlights of the release are nested EPT and pv-ticketlocks support (hypervisor part, guest part, which is most of the code, goes through tip tree). Apart of that there are many fixes for all arches" Fix up semantic conflicts as discussed in the pull request thread.. * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (88 commits) ARM: KVM: Add newlines to panic strings ARM: KVM: Work around older compiler bug ARM: KVM: Simplify tracepoint text ARM: KVM: Fix kvm_set_pte assignment ARM: KVM: vgic: Bump VGIC_NR_IRQS to 256 ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regs ARM: KVM: vgic: fix GICD_ICFGRn access ARM: KVM: vgic: simplify vgic_get_target_reg KVM: MMU: remove unused parameter KVM: PPC: Book3S PR: Rework kvmppc_mmu_book3s_64_xlate() KVM: PPC: Book3S PR: Make instruction fetch fallback work for system calls KVM: PPC: Book3S PR: Don't corrupt guest state when kernel uses VMX KVM: x86: update masterclock when kvmclock_offset is calculated (v2) KVM: PPC: Book3S: Fix compile error in XICS emulation KVM: PPC: Book3S PR: return appropriate error when allocation fails arch: powerpc: kvm: add signed type cast for comparation KVM: x86: add comments where MMIO does not return to the emulator KVM: vmx: count exits to userspace during invalid guest emulation KVM: rename __kvm_io_bus_sort_cmp to kvm_io_bus_cmp kvm: optimize away THP checks in kvm_is_mmio_pfn() ...
2013-08-29Merge tag 'omap-for-v3.12/dra7xx-prcm' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/all From Tony Lindgren: Add basic support for devices on dra7xx by adding the PRCM and hwmod parts the same way as for other omaps. This is still needed in addition to device tree support for things like power management. Via Paul Walmsley <paul@pwsan.com>: This series adds basic TI DRA7xx PRCM and hwmod support. Basic test logs are available here: http://www.pwsan.com/omap/testlogs/dra7xx_prcm_devel_v3.12/20130823050445/ Note that DRA7xx could not be tested locally, since I don't have a board. * tag 'omap-for-v3.12/dra7xx-prcm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: DRA7: Enable PM framework initializations ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data ARM: OMAP: DRA7: Reuse the omap44xx_restart and fix the device instance ARM: OMAP: DRA7: powerdomain: Handle missing vc/vp ARM: OMAP: DRA7: powerdomain: Add DRA7XX data and update header ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters ARM: OMAP: DRA7: CM: Add minimal regbit shifts ARM: OMAP: DRA7: CM: Add DRA7XX register defines ARM: OMAP: DRA7: PRM: Add DRA7XX register definitions ARM: DRA7: Add the build support in omap2plus ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5 ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs' ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512 ARM: DRA7: board-generic: Add basic DT support ARM: DRA7: Resue the clocksource, clockevent support ARM: DRA7: Reuse io tables and add a new .init_early ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29Merge tag 'samsung-defconfig-v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup From Kukjin Kim: Remove exynos4_defconfig because, - No more used after disabling exynos non-DT - exynos_defconfig can support exynos SoCs * tag 'samsung-defconfig-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos4_defconfig: remove obsolete exynos4_defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29Merge branch 'armsoc/for-3.12/soc' of git://github.com/broadcom/bcm11351 ↵Olof Johansson
into next/boards From Christian Daudt, SoC changes for Broadcom. * 'armsoc/for-3.12/soc' of git://github.com/broadcom/bcm11351: (673 commits) ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. + Linux 3.11-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-28Merge tag 'renesas-cleanup2-for-v3.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/renesas From Simon Horman: Second round of Renesas ARM based SoC cleanups for v3.12 * Remove mach/hardware.h which has no useful contents * Remove ag5evm board support * Remove kota2 board support * Use pm-rmobile on sh7372 and r8a7740 SoCs only, it is otherwise unneeded * Remove use of INTC header on r8a7779 and r8a7740 SoCs * Cleanup registration of usb phy in r8a7779 SoC * Remove '0x's from R8A7779 DTS file for r8a7779 SoC * tag 'renesas-cleanup2-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (74 commits) ARM: shmobile: r8a7779: Remove '0x's from R8A7779 DTS file ARM: shmobile: r8a7779: cleanup registration of usb phy ARM: shmobile: No need to use INTC header on r8a7779 ARM: shmobile: No need to use INTC demux on r8a7740 ARM: shmobile: Use pm-rmobile on sh7372 and r8a7740 only ARM: shmobile: r8a73a4: Remove ->init_machine() special case ARM: shmobile: Remove include <mach/hardware.h> ARM: shmobile: Remove Marzen use of <mach/hardware.h> ARM: shmobile: Remove r8a7779 use of <mach/hardware.h> ARM: shmobile: Remove EMEV2 use of <mach/hardware.h> ARM: shmobile: Remove sh7372 use of <mach/hardware.h> ARM: shmobile: Remove sh73a0 use of <mach/hardware.h> ARCH: ARM: shmobile: Remove ag5evm board support ARCH: ARM: shmobile: Remove kota2 board support leds: Remove leds-renesas-tpu driver ARM: shmobile: sh73a0: Remove all GPIOs ARM: shmobile: kota2: Use leds-pwm + pwm-rmob ARM: shmobile: armadillo800eva: Add backlight support ARM: shmobile: Setup r8a7790 arch timer based on MD pins ARM: shmobile: Introduce r8a7790_read_mode_pins() ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-28ARM: OMAP2+: Remove old display drivers from omap2plus_defconfigTomi Valkeinen
The old display drivers are no longer used, and will be phased out. So remove them from the omap2plus_defconfig. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP2+: Add selected display drivers to omap2plus_defconfigTomi Valkeinen
Add some of the most common new display drivers to omap2plus_defconfig to be built as modules. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-26ARM: at91: at91_dt_defconfig: enable rm9200 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-25[media] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfigVladimir Barinov
Add the VIN and ADV7180 drivers to 'marzen_defconfig'. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] ARM: shmobile: BOCK-W: enable VIN and ML86V7667 in defconfigVladimir Barinov
Add the VIN and ML86V7667 drivers to 'bockw_defconfig'. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-23Merge tag 'mxs-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Kevin Hilman
into next/soc From Shawn Guo: It contains mxs soc changes for 3.12. - Run savedefconfig on mxs_defconfig to clean it up - Fix on mxs_restart() routine for interrupt context calling - A few other random updates and cleanups * tag 'mxs-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: pm: Include "pm.h" ARM: mxs: Simplify detection of CrystalFontz boards ARM: mach-mxs: Remove "TO" string from revision field ARM: mxs: Fix BUG() when invoking mxs_restart() from interrupt context ARM: mxs: Allow DT clock providers ARM: mxs_defconfig: Cleanup mxs_defconfig
2013-08-23Merge tag 'imx-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Kevin Hilman
into next/soc From Shawn Guo: It contains a bunch of imx soc updates for 3.12. - Add more ethernet phy fixups for imx6 boards - Add some missing imx6q clocks into clock driver - Add new clock types fixup mux and div to work around some ugly hardware defect - Consolidate L2 cache initialization function, so that it can be used on more i.MX SoCs - Replace magic numbers in mach-imx6q.c with well defined macros - Small fixes for imx6q and pllv3 clock drivers - Some random updates on imx defconfig files * tag 'imx-soc-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: (33 commits) phy: micrel: Add definitions for common Micrel PHY registers ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 option ARM: imx: Move anatop related from board file to anatop driver ARM: imx_v6_v7_defconfig: Enable wireless support ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig ARM: imx_v6_v7_defconfig: Add SATA support ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig ARM: mx53: Allow suspend/resume ARM: mach-imx: Select ARM_CPU_SUSPEND at ARCH_MXC level ARM: imx_v6_v7_defconfig: Select CONFIG_TOUCHSCREEN_EGALAX ARM: imx6q: add vdoa gate clock ARM: imx6q: add the missing cko output selection ARM: imx6q: add cko2 clocks ARM: imx6q: add spdif gate clock ARM: imx: clk-pllv3: improve the timeout waiting method ARM: imx6: change some clocks to fixup clocks ARM: imx: add common clock support for fixup mux ARM: imx: add common clock support for fixup div ARM: imx: Select MIGHT_HAVE_CACHE_L2X0 ARM: imx: fix imx_init_l2cache storage class ...
2013-08-22ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 optionFabio Estevam
Commit 02502da45 (ASoC: imx-mc13783: Depend on ARCH_ARM) caused the selection of CONFIG_SND_SOC_IMX_MC13783 to be impossible due to a wrong dependency, which caused CONFIG_SND_SOC_IMX_MC13783 to be removed after the defconfigs cleanups. The original selection problem has been fixed by 9f19de649f (ASoC: imx-mc13783: Make SND_SOC_IMX_MC13783 visible again), so it is possible to select CONFIG_SND_SOC_IMX_MC13783 again as originally done. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx_v6_v7_defconfig: Enable wireless supportFabio Estevam
Wandboard has a Broadcom 4329 chipset connected to SDHC, so turn on the wireless related options. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfigFabio Estevam
Generate imx_v4_v5_defconfig by doing: make imx_v4_v5_defconfig make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig No functional change. The goal here is to cleanup imx_v4_v5_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx_v6_v7_defconfig: Add SATA supportFabio Estevam
Let SATA support be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfigFabio Estevam
Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx_v6_v7_defconfig: Select CONFIG_TOUCHSCREEN_EGALAXFabio Estevam
egalax touchscren controller is present on mx6 sabresd/sabrelite, so let's enable it by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-20Merge tag 'tegra-for-3.12-defconfig' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/boards From: Stephen Warren: ARM: tegra: defconfig update for 3.12 This defconfig change enables: * SYSVIPC (needed for some apps, e.g. fakeroot). * Elantech touchpad (touchpad on AC100). * SCSI_MULTI_LUN (needed for some USB SD card readers). * PCI, MSI, and Tegra's PCIe driver. * USB XHCI; useful for testing PCIe. * tag 'tegra-for-3.12-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: defconfig updates
2013-08-16ARM: mxs_defconfig: Cleanup mxs_defconfigFabio Estevam
Generate mxs_defconfig by doing: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig No functional change. The goal here is to cleanup mxs_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16Merge tag 'defconfig-3.12' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson
next/boards From Jason Cooper, mvebu defconfig changes for v3.12: - kirkwood: add i2c devices, ext4, r8169 - mvebu: gpio-keys, input event - dove: SI5351, PCI, xHCI * tag 'defconfig-3.12' of git://git.infradead.org/linux-mvebu: ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI ARM: mvebu: add gpio-keys and input event support in defconfig ARM: Kirkwood: update defconfig for used i2c devices, EXT4 FS, r8169 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-16Merge tag 'boards-3.12-2' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson
next/boards From Jason Cooper, mvebu boards changes for v3.12: - kirkwood - convert Dockstar, Guruplug, mv88f6281gtw_ge to DT - remove legacy boards (which have DT support) sheevaplug, lacie boards - ARRAY_AND_SIZE() cleanup - dove - some DT node updates (depends on irqchip/clocksource DT changes earlier) - add the D2Plug board * tag 'boards-3.12-2' of git://git.infradead.org/linux-mvebu: ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: kirkwood: use dts pre-processor for mv88f6281gtw-ge ARM: kirkwood: convert the mv88f6281gtw_ge board to DT ARM: kirkwood: remove LaCie boards that are supported through DT ARM: kirkwood: remove support for legacy booting of Sheevaplug ARM: kirkwood: remove support for legacy booting of Guruplug ARM: kirkwood: remove support for legacy booting of Dockstar Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-16ARM: imx_v6_v7_defconfig: enable WEIM driverHuang Shijie
enable the weim driver. Since the NOR is connected to the WEIM for imx6q{dl}-sabreauto, we also enable the MTD_PHYSMAP_OF module. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: imx_v4_v5_defconfig: Select CONFIG_MACH_IMX25_DTFabio Estevam
Allow booting a mx25 dt kernel by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: imx_v6_v7_defconfig: Enable VPU driverFabio Estevam
Let VPU driver be selected by default. VPU driver requires a SRAM pool, so select CONFIG_SRAM as well. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: imx_v6_v7_defconfig: Enable LVDS Display BridgeFabio Estevam
Let IMX_LDB driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: imx_v6_v7_defconfig: Enable FSL_LPUART supportFabio Estevam
Enable the FSL_LPUART driver as it is used by the VF610 family. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: imx_v6_v7_defconfig: Select CONFIG_NOP_USB_XCEIV by defaultFabio Estevam
In order to get USB functionality on mx5 boards, we need to select CONFIG_NOP_USB_XCEIV option, so let's enable it by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-14Merge tag 'renesas-defconfig-for-v3.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards From Simon Horman: Renesas ARM based SoC defconfig updates for v3.12 * Enable GPIO LEDs and keys for ape6evm board * Enable ARM_APPENDED_DTB for marzen board * Add lager defconfig board * tag 'renesas-defconfig-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: ape6evm: Enable gpio-leds in defconfig ARM: shmobile: ape6evm: Enable gpio-keys in defconfig ARM: shmobile: Add lager defconfig ARM: shmobile: marzen: Enable ARM_APPENDED_DTB in defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-13ARM: DRA7: Add the build support in omap2plusR Sricharan
Now that all the needed pieces for DRA7 based SoCs' is present, enable the build support in omap2plus_defconfig Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
2013-08-12ARM: tegra: defconfig updatesStephen Warren
Enable: * SYSVIPC (needed for some apps, e.g. fakeroot). * Elantech touchpad (touchpad on AC100). * SCSI_MULTI_LUN (needed for some USB SD card readers). * PCI, MSI, and Tegra's PCIe driver. * USB XHCI; useful for testing PCIe. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12ARM: dove: update dove_defconfig with SI5351, PCI, and xHCISebastian Hesselbarth
This adds SI5351 clock driver found on the SolidRun CuBox, PCI driver and USB 3.0 xHCI driver found on the Globalscale D3Plug to dove_defconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-12ARM: kirkwood: fix DT building and update defconfigJason Cooper
commit 844703c ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code removed the last kirkwood DT/platform board in kirkwood_defconfig, this triggered a rescan of the config symbols, the result of which breaks the build because KIRKWOOD_DT does not select OF_IRQ. This commit fixes the regression and updates the defconfig to explicitly enable SERIAL_OF_PLATFORM and KIRWOOD_DT. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-12ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform codeJamie Lentin
No platform code left now, so remove all references to it. The reset gpio code didn't work to begin with, it will be replaced with a DT node at a future date. -jc Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-08ARM: configs: disable DEBUG_LL in bcm_defconfigMatt Porter
DEBUG_LL is not supported yet on bcm281xx and causes a temporary hang due to timeout at boot. Signed-off-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Christian Daudt <csd@broadcom.com>
2013-08-06ARM bcm281xx: Turn on socket & network support.Markus Mayer
We need this so an actual disk-based root file system will work. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Christian Daudt <csd@broadcom.com>
2013-08-06ARM: shmobile: ape6evm: Enable gpio-leds in defconfigSimon Horman
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-06ARM: shmobile: ape6evm: Enable gpio-keys in defconfigSimon Horman
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>