summaryrefslogtreecommitdiff
path: root/arch/arm/include
AgeCommit message (Collapse)Author
2013-03-13Merge tag 'stable/for-linus-3.9-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - Compile warnings and errors (one on x86, two on ARM) - WARNING in xen-pciback - Use the acpi_processor_get_performance_info instead of the 'register' version * tag 'stable/for-linus-3.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/acpi: remove redundant acpi/acpi_drivers.h include xen: arm: mandate EABI and use generic atomic operations. acpi: Export the acpi_processor_get_performance_info xen/pciback: Don't disable a PCI device that is already disabled.
2013-03-11xen: arm: mandate EABI and use generic atomic operations.Ian Campbell
Rob Herring has observed that c81611c4e96f "xen: event channel arrays are xen_ulong_t and not unsigned long" introduced a compile failure when building without CONFIG_AEABI: /tmp/ccJaIZOW.s: Assembler messages: /tmp/ccJaIZOW.s:831: Error: even register required -- `ldrexd r5,r6,[r4]' Will Deacon pointed out that this is because OABI does not require even base registers for 64-bit values. We can avoid this by simply using the existing atomic64_xchg operation and the same containerof trick as used by the cmpxchg macros. However since this code is used on memory which is shared with the hypervisor we require proper atomic instructions and cannot use the generic atomic64 callbacks (which are based on spinlocks), therefore add a dependency on !GENERIC_ATOMIC64. Since we already depend on !CPU_V6 there isn't much downside to this. While thinking about this we also observed that OABI has different struct alignment requirements to EABI, which is a problem for hypercall argument structs which are shared with the hypervisor and which must be in EABI layout. Since I don't expect people to want to run OABI kernels on Xen depend on CONFIG_AEABI explicitly too (although it also happens to be enforced by the !GENERIC_ATOMIC64 requirement too). Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robherring2@gmail.com> Acked-by: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-03ARM: 7665/1: Wire up kcmp syscallCyrill Gorcunov
Wire up kcmp syscall for ability to proceed checkpoint/restore procedure on ARM platform. Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03ARM: 7660/1: tlb: add branch predictor maintenance operationsWill Deacon
The ARM architecture requires explicit branch predictor maintenance when updating an instruction stream for a given virtual address. In reality, this isn't so much of a burden because the branch predictor is flushed during the cache maintenance required to make the new instructions visible to the I-side of the processor. However, there are still some cases where explicit flushing is required, so add a local_bp_flush_all operation to deal with this. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03ARM: 7659/1: mm: make mm->context.id an atomic64_t variableWill Deacon
mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-03Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull late ARM updates from Russell King: "Here is the late set of ARM updates for this merge window; in here is: - The ARM parts of the broadcast timer support, core parts merged through tglx's tree. This was left over from the previous merge to allow the dependency on tglx's tree to be resolved. - A fix to the VFP code which shows up on Raspberry Pi's, as well as fixing the fallout from a previous commit in this area. - A number of smaller fixes scattered throughout the ARM tree" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: Fix broken commit 0cc41e4a21d43 corrupting kernel messages ARM: fix scheduling while atomic warning in alignment handling code ARM: VFP: fix emulation of second VFP instruction ARM: 7656/1: uImage: Error out on build of multiplatform without LOADADDR ARM: 7640/1: memory: tegra_ahb_enable_smmu() depends on TEGRA_IOMMU_SMMU ARM: 7654/1: Preserve L_PTE_VALID in pte_modify() ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock ARM: 7651/1: remove unused smp_timer_broadcast #define
2013-03-03Merge branches 'devel-stable', 'fixes' and 'mmci' into for-linusRussell King
2013-02-26Merge branch 'for-v3.9' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping updates from Marek Szyprowski: "This time all patches are related only to ARM DMA-mapping subsystem. The main extension provided by this pull request is highmem support. Besides that it contains a bunch of small bugfixes and cleanups." * 'for-v3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: DMA-mapping: fix memory leak in IOMMU dma-mapping implementation ARM: dma-mapping: Add maximum alignment order for dma iommu buffers ARM: dma-mapping: use himem for DMA buffers for IOMMU-mapped devices ARM: dma-mapping: add support for CMA regions placed in highmem zone arm: dma mapping: export arm iommu functions ARM: dma-mapping: Add arm_iommu_detach_device() ARM: dma-mapping: Add macro to_dma_iommu_mapping() ARM: dma-mapping: Set arm_dma_set_mask() for iommu->set_dma_mask() ARM: iommu: Include linux/kref.h in asm/dma-iommu.h
2013-02-26Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "This is fairly big pull by my standards as I had missed last merge window. So we have the support for device tree for slave-dmaengine, large updates to dw_dmac driver from Andy for reusing on different architectures. Along with this we have fixes on bunch of the drivers" Fix up trivial conflicts, usually due to #include line movement next to each other. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits) Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" ARM: dts: pl330: Add #dma-cells for generic dma binding support DMA: PL330: Register the DMA controller with the generic DMA helpers DMA: PL330: Add xlate function DMA: PL330: Add new pl330 filter for DT case. dma: tegra20-apb-dma: remove unnecessary assignment edma: do not waste memory for dma_mask dma: coh901318: set residue only if dma is in progress dma: coh901318: avoid unbalanced locking dmaengine.h: remove redundant else keyword dma: of-dma: protect list write operation by spin_lock dmaengine: ste_dma40: do not remove descriptors for cyclic transfers dma: of-dma.c: fix memory leakage dw_dmac: apply default dma_mask if needed dmaengine: ioat - fix spare sparse complain dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING dw_dmac: add support for Lynxpoint DMA controllers dw_dmac: return proper residue value dw_dmac: fill individual length of descriptor ...
2013-02-25ARM: dma-mapping: Add arm_iommu_detach_device()Hiroshi Doyu
A counter part of arm_iommu_attach_device(). Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: Add macro to_dma_iommu_mapping()Hiroshi Doyu
This can be built without CONFIG_ARM_DMA_USE_IOMMU. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: iommu: Include linux/kref.h in asm/dma-iommu.hLaurent Pinchart
The dma_iommu_mapping structure defined in asm/dma-iommu.h embeds a struct kref, include the appropriate header file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTSMarc Zyngier
Commit bbacc0c (KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTS) broke KVM/ARM by changing a global #define. Apply the same change to fix the compilation breakage. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-02-25Merge tag 'stable/for-linus-3.9-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen update from Konrad Rzeszutek Wilk: "This has two new ACPI drivers for Xen - a physical CPU offline/online and a memory hotplug. The way this works is that ACPI kicks the drivers and they make the appropiate hypercall to the hypervisor to tell it that there is a new CPU or memory. There also some changes to the Xen ARM ABIs and couple of fixes. One particularly nasty bug in the Xen PV spinlock code was fixed by Stefan Bader - and has been there since the 2.6.32! Features: - Xen ACPI memory and CPU hotplug drivers - allowing Xen hypervisor to be aware of new CPU and new DIMMs - Cleanups Bug-fixes: - Fixes a long-standing bug in the PV spinlock wherein we did not kick VCPUs that were in a tight loop. - Fixes in the error paths for the event channel machinery" Fix up a few semantic conflicts with the ACPI interface changes in drivers/xen/xen-acpi-{cpu,mem}hotplug.c. * tag 'stable/for-linus-3.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: event channel arrays are xen_ulong_t and not unsigned long xen: Send spinlock IPI to all waiters xen: introduce xen_remap, use it instead of ioremap xen: close evtchn port if binding to irq fails xen-evtchn: correct comment and error output xen/tmem: Add missing %s in the printk statement. xen/acpi: move xen_acpi_get_pxm under CONFIG_XEN_DOM0 xen/acpi: ACPI cpu hotplug xen/acpi: Move xen_acpi_get_pxm to Xen's acpi.h xen/stub: driver for CPU hotplug xen/acpi: ACPI memory hotplug xen/stub: driver for memory hotplug xen: implement updated XENMEM_add_to_physmap_range ABI xen/smp: Move the common CPU init code a bit to prep for PVH patch.
2013-02-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull signal handling cleanups from Al Viro: "This is the first pile; another one will come a bit later and will contain SYSCALL_DEFINE-related patches. - a bunch of signal-related syscalls (both native and compat) unified. - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE (fixing several potential problems with missing argument validation, while we are at it) - a lot of now-pointless wrappers killed - a couple of architectures (cris and hexagon) forgot to save altstack settings into sigframe, even though they used the (uninitialized) values in sigreturn; fixed. - microblaze fixes for delivery of multiple signals arriving at once - saner set of helpers for signal delivery introduced, several architectures switched to using those." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits) x86: convert to ksignal sparc: convert to ksignal arm: switch to struct ksignal * passing alpha: pass k_sigaction and siginfo_t using ksignal pointer burying unused conditionals make do_sigaltstack() static arm64: switch to generic old sigaction() (compat-only) arm64: switch to generic compat rt_sigaction() arm64: switch compat to generic old sigsuspend arm64: switch to generic compat rt_sigqueueinfo() arm64: switch to generic compat rt_sigpending() arm64: switch to generic compat rt_sigprocmask() arm64: switch to generic sigaltstack sparc: switch to generic old sigsuspend sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE sparc: kill sign-extending wrappers for native syscalls kill sparc32_open() sparc: switch to use of generic old sigaction sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE mips: switch to generic sys_fork() and sys_clone() ...
2013-02-21Merge tag 'virt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM virtualization changes: "This contains parts of the ARM KVM support that have dependencies on other patches merged through the arm-soc tree. In combination with patches coming through Russell's tree, this will finally add full support for the kernel based virtual machine on ARM, which has been awaited for some time now. Further, we now have a separate platform for virtual machines and qemu booting that is used by both Xen and KVM, separating these from the Versatile Express reference implementation. Obviously, this new platform is multiplatform capable so it can be combined with existing machines in the same kernel." * tag 'virt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) ARM: arch_timer: include linux/errno.h arm: arch_timer: add missing inline in stub function ARM: KVM: arch_timers: Wire the init code and config option ARM: KVM: arch_timers: Add timer world switch ARM: KVM: arch_timers: Add guest timer core support ARM: KVM: Add VGIC configuration option ARM: KVM: VGIC initialisation code ARM: KVM: VGIC control interface world switch ARM: KVM: VGIC interrupt injection ARM: KVM: vgic: retire queued, disabled interrupts ARM: KVM: VGIC virtual CPU interface management ARM: KVM: VGIC distributor handling ARM: KVM: VGIC accept vcpu and dist base addresses from user space ARM: KVM: Initial VGIC infrastructure code ARM: KVM: Keep track of currently running vcpus KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctl ARM: gic: add __ASSEMBLY__ guard to C definitions ARM: gic: define GICH offsets for VGIC support ARM: gic: add missing distributor defintions ARM: mach-virt: fixup machine descriptor after removal of sys_timer ...
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-21Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform support from Arnd Bergmann: "Converting more ARM platforms to multiplatform support. This time, OMAP gets converted, which is a major step since this is by far the largest platform in terms of code size. The same thing happens to the vt8500 platform." * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: net: cwdavinci_cpdma: export symbols for cpsw remoteproc: omap: depend on OMAP_MBOX_FWK [media] davinci: do not include mach/hardware.h ARM: OMAP2+: Make sure files with omap initcalls include soc.h ARM: OMAP2+: Include soc.h to drm.c to fix compiling ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall ARM: multi_v7_defconfig: add ARCH_ZYNQ ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB arm: vt8500: Remove remaining mach includes arm: vt8500: Convert debug-macro.S to be multiplatform friendly arm: vt8500: Remove single platform Kconfig options ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S ARM: OMAP2+: Add minimal support for booting vexpress ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support ARM: OMAP2+: Disable code that currently does not work with multiplaform ARM: OMAP2+: Add multiplatform debug_ll support ARM: OMAP: Fix dmaengine init for multiplatform ARM: OMAP: Fix i2c cmdline initcall for multiplatform ARM: OMAP2+: Use omap initcalls ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels
2013-02-21Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC driver specific changes from Arnd Bergmann: - Updates to the ux500 cpufreq code - Moving the u300 DMA controller driver to drivers/dma - Moving versatile express drivers out of arch/arm for sharing with arch/arm64 - Device tree bindings for the OMAP General Purpose Memory Controller * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: OMAP2+: gpmc: Add device tree documentation for elm handle ARM: OMAP2+: gpmc: add DT bindings for OneNAND ARM: OMAP2+: gpmc-onenand: drop __init annotation mtd: omap-onenand: pass device_node in platform data ARM: OMAP2+: Prevent potential crash if GPMC probe fails ARM: OMAP2+: gpmc: Remove unneeded of_node_put() arm: Move sp810.h to include/linux/amba/ ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs ARM: OMAP: gpmc-nand: drop __init annotation mtd: omap-nand: pass device_node in platform data ARM: OMAP: gpmc: don't create devices from initcall on DT dma: coh901318: cut down on platform data abstraction dma: coh901318: merge header files dma: coh901318: push definitions into driver dma: coh901318: push header down into the DMA subsystem dma: coh901318: skip hard-coded addresses dma: coh901318: remove hardcoded target addresses dma: coh901318: push platform data into driver dma: coh901318: create a proper platform data file ...
2013-02-21Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
2013-02-21Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM SoC bug fixes from Arnd Bergmann: "Bug fixes that did not make it into v3.8, mostly because they were not considered important enough, and in some cases because bugs only show up in combination with other patches destined for 3.9. This includes a few larger patches for GPIO on the Marvell PXA platform and a lot of Samsung specific bug fixes, as well as a series from Arnd to fix older build warnings." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350 scripts/sortextable: silence script output ARM: s3c: i2c: add platform_device forward declaration ARM: mvebu: allow selecting mvebu without Armada XP ARM: pick Versatile by default for !MMU ARM: integrator: fix build with INTEGRATOR_AP off ARM: integrator/versatile: fix NOMMU warnings ARM: sa1100: don't warn about mach/ide.h ARM: shmobile: fix defconfig warning on CONFIG_USB ARM: w90x900: fix legacy assembly syntax ARM: samsung: fix assembly syntax for new gas ARM: disable virt_to_bus/virt_to_bus almost everywhere ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl ARM: SAMSUNG: Silence empty switch warning in fimc-core.h ARM: SAMSUNG: Silence empty switch warning in sdhci.h ARM: msm: proc_comm_boot_wait should not be __init arm: vt8500: Update MAINTAINERS entry for arch-vt8500 ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU ARM: S5PV210: Fix early uart output in fifo mode ...
2013-02-21ARM: 7654/1: Preserve L_PTE_VALID in pte_modify()Catalin Marinas
Following commit 26ffd0d4 (ARM: mm: introduce present, faulting entries for PAGE_NONE), if a page has been mapped as PROT_NONE, the L_PTE_VALID bit is cleared by the set_pte_ext() code. With LPAE the software and hardware pte share the same location and subsequent modifications of pte range (change_protection()) will leave the L_PTE_VALID bit cleared. This patch adds the L_PTE_VALID bit to the newprot mask in pte_modify(). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Subash Patel <subash.rp@samsung.com> Tested-by: Subash Patel <subash.rp@samsung.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # 3.8.x Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-21ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clockNicolas Pitre
When udelay() is implemented using an architected timer, it is wrong to scale loops_per_jiffy when changing the CPU clock frequency since the timer clock remains constant. The lpj should probably become an implementation detail relevant to the CPU loop based delay routine only and more confined to it. In the mean time this is the minimal fix needed to have expected delays with the timer based implementation when cpufreq is also in use. Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-20Merge branch 'for-linus-2' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates (part two) from Russell King: - breakpoint and perf updates from Will Deacon. - hypervisor boot mode updates from Will. - support for Power State Coordination Interface via the Hypervisor - core ARM support for KVM * 'for-linus-2' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) KVM: ARM: Add maintainer entry for KVM/ARM KVM: ARM: Power State Coordination Interface implementation KVM: ARM: Handle I/O aborts KVM: ARM: Handle guest faults in KVM KVM: ARM: VFP userspace interface KVM: ARM: Demux CCSIDR in the userspace API KVM: ARM: User space API for getting/setting co-proc registers KVM: ARM: Emulation framework and CP15 emulation KVM: ARM: World-switch implementation KVM: ARM: Inject IRQs and FIQs from userspace KVM: ARM: Memory virtualization setup KVM: ARM: Hypervisor initialization KVM: ARM: Initial skeleton to compile KVM support ARM: Section based HYP idmap ARM: Add page table and page defines needed by KVM ARM: perf: simplify __hw_perf_event_init err handling ARM: perf: remove unnecessary checks for idx < 0 ARM: perf: handle armpmu_register failing ARM: perf: don't pretend to support counting of L1I writes ARM: perf: remove redundant NULL check on cpu_pmu ...
2013-02-20Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates (part one) from Russell King: - MMC patches from Ulf Hansson and Pawel Moll. These add support for DDR mode and the latest variant found on ARM Versatile Express, as well as a number of cleanups. - A fix for to improve the behaviour of ARMs sched_clock() - Changes to the ARM ioremap() code. I'm not convinced with the primary arguments for this, but it's been around for a while, and people seem happy with it - and the "other" justification for this is at http://lkml.org/lkml/2012/12/6/184 - Add SCHED_HRTICK to ARMs Kconfig - Making the ARM SHA/AES code Thumb-2 compatible - A collection of other small updates. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (26 commits) ARM: add SCHED_HRTICK config option ARM: 7650/1: mm: replace direct access to mm->context.id with new macro ARM: 7649/1: mm: mm->context.id fix for big-endian ARM: 7648/1: pci: Allow passing per-controller private data ARM: 7647/1: pci: Keep pci_common_init() around after init ARM: fix warnings introduced by previous patch ARM: 7646/1: mm: use static_vm for managing static mapped areas ARM: 7645/1: ioremap: introduce an infrastructure for static mapped area ARM: 7644/1: vmregion: remove vmregion code entirely MAINTAINERS: Re-assert MMCI driver maintainer status MAINTAINERS: add additional file for MMCI driver MAINTAINERS: add maintainer entry for AMBA serial drivers ARM: 7637/1: memory: use SZ_ constants for defining the virtual memory layout ARM: 7643/1: sched: correct update_sched_clock() ARM: 7635/1: versatile: fix the PCI IRQ regression ARM: 7639/1: cache-l2x0: add missed dummy outer_resume entry ARM: 7630/1: mmc: mmci: Fixup and cleanup code for DMA handling ARM: 7632/1: spinlock: avoid exclusive accesses on unlock() path ARM: 7631/1: mmc: mmci: Add new VE MMCI variant ARM: 7623/1: mmc: mmci: Fixup clock gating when freq is 0 for ST-variants ...
2013-02-20Merge branch 'misc' into for-linusRussell King
Conflicts: arch/arm/include/asm/memory.h
2013-02-20xen: event channel arrays are xen_ulong_t and not unsigned longIan Campbell
On ARM we want these to be the same size on 32- and 64-bit. This is an ABI change on ARM. X86 does not change. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Keir (Xen.org) <keir@xen.org> Cc: Tim Deegan <tim@xen.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: linux-arm-kernel@lists.infradead.org Cc: xen-devel@lists.xen.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-20xen: introduce xen_remap, use it instead of ioremapStefano Stabellini
ioremap can't be used to map ring pages on ARM because it uses device memory caching attributes (MT_DEVICE*). Introduce a Xen specific abstraction to map ring pages, called xen_remap, that is defined as ioremap on x86 (no behavioral changes). On ARM it explicitly calls __arm_ioremap with the right caching attributes: MT_MEMORY. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19Merge tag 'omap-for-v3.9/usb-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc These changes contain the OMAP USB related platform data changes that were dropped from linux next because of the merge conflicts as requested by me and Olof. The reason was that at this point we really should be able to do the arch/arm related changes separately from driver changes to avoid dependencies between branches. These patches were initially part of the USB related MFD patches. Based on our comments, Roger Quadros quickly reworked these patches into a shared branch between ARM SoC tree and the MFD tree, then separate patches for the OMAP platform data and MFD driver. Note that this branch will conflict with c1d1cd597fc7 ("ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code"). Please see http://lkml.org/lkml/2013/2/11/16 for the merge resolution. [arnd - resolved the merge conflict] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-16ARM: 7648/1: pci: Allow passing per-controller private dataThierry Reding
In order to allow drivers to specify private data for each controller, this commit adds a private_data field to the struct hw_pci. This field is an array of nr_controllers pointers that will be used to initialize the private_data field of the corresponding controller's pci_sys_data structure. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-16ARM: 7637/1: memory: use SZ_ constants for defining the virtual memory layoutWill Deacon
Parts of the virtual memory layout (mainly the modules area) are described using open-coded immediate values. Use the SZ_ definitions from linux/sizes.h instead to make the code clearer. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-14burying unused conditionalsAl Viro
__ARCH_WANT_SYS_RT_SIGACTION, __ARCH_WANT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} - can be assumed always set.
2013-02-14Merge branch 'warning-fixes' into next/fixes-non-criticalArnd Bergmann
These are fixes for compiler warnings that for the most part were introduced during the 3.8 cycle but are otherwise harmless. * warning-fixes: scripts/sortextable: silence script output ARM: s3c: i2c: add platform_device forward declaration ARM: mvebu: allow selecting mvebu without Armada XP ARM: pick Versatile by default for !MMU ARM: integrator: fix build with INTEGRATOR_AP off ARM: integrator/versatile: fix NOMMU warnings ARM: sa1100: don't warn about mach/ide.h ARM: shmobile: fix defconfig warning on CONFIG_USB ARM: w90x900: fix legacy assembly syntax ARM: samsung: fix assembly syntax for new gas ARM: disable virt_to_bus/virt_to_bus almost everywhere Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-14ARM: disable virt_to_bus/virt_to_bus almost everywhereArnd Bergmann
We are getting a number of warnings about the use of the deprecated bus_to_virt function in drivers using the ARM ISA DMA API: drivers/parport/parport_pc.c: In function 'parport_pc_fifo_write_block_dma': drivers/parport/parport_pc.c:622:3: warning: 'bus_to_virt' is deprecated (declared at arch/arm/include/asm/memory.h:253) [-Wdeprecated-declarations] This is only because that function gets used by the inline set_dma_addr() helper. We know that any driver for the ISA DMA API is correctly using the DMA addresses, so we can change this to use the __bus_to_virt() function instead, which does not warn. After this, there are no remaining drivers that are used on any defconfigs on ARM using virt_to_bus or bus_to_virt, with the exception of the OSS sound driver. That driver is only used on RiscPC, NetWinder and Shark, so we can set ARCH_NO_VIRT_TO_BUS on all other platforms and hide the deprecated functions, which is far more effective than marking them as deprecated, in order to avoid any new users of that code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk>
2013-02-12Merge branch 'kvm-arm/timer' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into next/virt From Marc Zyngier, this branch enables virtual GIC and timer for KVM/ARM. * 'kvm-arm/timer' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms: ARM: KVM: arch_timers: Wire the init code and config option ARM: KVM: arch_timers: Add timer world switch ARM: KVM: arch_timers: Add guest timer core support ARM: KVM: Add VGIC configuration option ARM: KVM: VGIC initialisation code ARM: KVM: VGIC control interface world switch ARM: KVM: VGIC interrupt injection ARM: KVM: vgic: retire queued, disabled interrupts ARM: KVM: VGIC virtual CPU interface management ARM: KVM: VGIC distributor handling ARM: KVM: VGIC accept vcpu and dist base addresses from user space ARM: KVM: Initial VGIC infrastructure code ARM: KVM: Keep track of currently running vcpus KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctl ARM: gic: add __ASSEMBLY__ guard to C definitions ARM: gic: define GICH offsets for VGIC support ARM: gic: add missing distributor defintions
2013-02-11ARM: KVM: arch_timers: Add timer world switchMarc Zyngier
Do the necessary save/restore dance for the timers in the world switch code. In the process, allow the guest to read the physical counter, which is useful for its own clock_event_device. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11ARM: KVM: arch_timers: Add guest timer core supportMarc Zyngier
Add some the architected timer related infrastructure, and support timer interrupt injection, which can happen as a resultof three possible events: - The virtual timer interrupt has fired while we were still executing the guest - The timer interrupt hasn't fired, but it expired while we were doing the world switch - A hrtimer we programmed earlier has fired Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11Merge branch 'for-arm-soc/arch-timers' of ↵Marc Zyngier
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into kvm-arm/timer
2013-02-11ARM: KVM: VGIC initialisation codeMarc Zyngier
Add the init code for the hypervisor, the virtual machine, and the virtual CPUs. An interrupt handler is also wired to allow the VGIC maintenance interrupts, used to deal with level triggered interrupts and LR underflows. A CPU hotplug notifier is registered to disable/enable the interrupt as requested. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11ARM: KVM: VGIC interrupt injectionMarc Zyngier
Plug the interrupt injection code. Interrupts can now be generated from user space. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11ARM: KVM: VGIC virtual CPU interface managementMarc Zyngier
Add VGIC virtual CPU interface code, picking pending interrupts from the distributor and stashing them in the VGIC control interface list registers. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11ARM: KVM: VGIC distributor handlingMarc Zyngier
Add the GIC distributor emulation code. A number of the GIC features are simply ignored as they are not required to boot a Linux guest. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11ARM: KVM: VGIC accept vcpu and dist base addresses from user spaceChristoffer Dall
User space defines the model to emulate to a guest and should therefore decide which addresses are used for both the virtual CPU interface directly mapped in the guest physical address space and for the emulated distributor interface, which is mapped in software by the in-kernel VGIC support. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11ARM: KVM: Initial VGIC infrastructure codeMarc Zyngier
Wire the basic framework code for VGIC support and the initial in-kernel MMIO support code for the VGIC, used for the distributor emulation. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11ARM: KVM: Keep track of currently running vcpusMarc Zyngier
When an interrupt occurs for the guest, it is sometimes necessary to find out which vcpu was running at that point. Keep track of which vcpu is being run in kvm_arch_vcpu_ioctl_run(), and allow the data to be retrieved using either: - kvm_arm_get_running_vcpu(): returns the vcpu running at this point on the current CPU. Can only be used in a non-preemptible context. - kvm_arm_get_running_vcpus(): returns the per-CPU variable holding the running vcpus, usable for per-CPU interrupts. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctlChristoffer Dall
On ARM some bits are specific to the model being emulated for the guest and user space needs a way to tell the kernel about those bits. An example is mmio device base addresses, where KVM must know the base address for a given device to properly emulate mmio accesses within a certain address range or directly map a device with virtualiation extensions into the guest address space. We make this API ARM-specific as we haven't yet reached a consensus for a generic API for all KVM architectures that will allow us to do something like this. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11Merge branch 'depends/cleanup' into next/virtOlof Johansson
2013-02-11Merge branch 'depends/rmk-psci' into next/virtOlof Johansson
2013-02-11Merge branch 'irqchip/gic-vic-move' into next/virtOlof Johansson
2013-02-11Merge branch 'for-arm-soc/arch-timers' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into next/virt From Will Deacon: This set of changes moves the arch-timer driver out from arch/arm/ and into drivers/clocksource and unifies the new driver with the arm64 copy. * 'for-arm-soc/arch-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: ARM: arch_timers: switch to physical timers if HYP mode is available Documentation: Add ARMv8 to arch_timer devicetree arm64: move from arm_generic to arm_arch_timer arm64: arm_generic: prevent reading stale time arm: arch_timer: move core to drivers/clocksource arm: arch_timer: add arch_counter_set_user_access arm: arch_timer: divorce from local_timer api arm: arch_timer: add isbs to register accessors arm: arch_timer: factor out register accessors arm: arch_timer: split cntfrq accessor arm: arch_timer: standardise counter reading arm: arch_timer: use u64/u32 for register data arm: arch_timer: remove redundant available check arm: arch_timer: balance device_node refcounting Signed-off-by: Olof Johansson <olof@lixom.net>