summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci
AgeCommit message (Collapse)Author
2010-04-07Merge branch 'davinci-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> davinci: DM365: fix duplicate default IRQ priorities davinci: edma: clear events in edma_start() davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined davinci: timers: don't enable timer until clocksource is initialized
2010-04-07davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h>Sergei Shtylyov
This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05davinci: DM365: fix duplicate default IRQ prioritiesKevin Hilman
IRQ 29 has two possible interrupts DDRINT and RTC, but having both in the default priority table is confusing (and triggers a warning from sparse.) This patch removes the lower priority DDRINT from the default priority table leaving the RTC setting as the default. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05davinci: edma: clear events in edma_start()Brian Niebuhr
This patch fixes an issue where a DMA channel can erroneously process an event generated by a previous transfer. A failure case is where DMA is being used for SPI transmit and receive channels on OMAP L138. In this case there is a single bit that controls all event generation from the SPI peripheral. Therefore it is possible that between when edma_stop() has been called for the transmit channel on a previous transfer and edma_start() is called for the transmit channel on a subsequent transfer, that a transmit event has been generated. The fix is to clear events in edma_start(). This prevents false events from being processed when events are enabled for that channel. Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefinedSekhar Nori
The da8xx/omap-l1 boards refuse to build when CONFIG_DAVINCI_MUX is undefined because arch/arm/mach-davinci/mux.c:da8xx_pinmux_setup() is not defined. This patch fixes this issue. This is build tested with davinci_all_defconfig and da8xx_omapl_defconfig and boot tested on DA830 EVM. Reported-by: Shanmuga Sundaram Mahendran <shanmuga@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05davinci: timers: don't enable timer until clocksource is initializedKevin Hilman
On da830, when the same timer is used for clocksource and clockevent, the timer can be started before the clockevent is registered/initialzed. This creates a window where a timer interrupt might fire before the clockevent handler has been setup and causes a crash. This patch moves the actual enable/start of the timer after the clockevent has ben registered. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-03-01Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (40 commits) DaVinci DM365: Adding support for SPI EEPROM DaVinci DM365: Adding DM365 SPI support DaVinci DM355: Modifications to DM355 SPI support DaVinci: SPI: Adding header file for SPI support. davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookup davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table() DaVinci: DM365: Voice codec support for the DM365 SoC davinci: clock: let clk->set_rate function sleep Add SDA and SCL pin numbers to i2c platform data davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138 davinci: build list of unused EDMA events dynamically davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case davinci: Keep count of channel controllers on a platform davinci: Correct return value of edma_alloc_channel api davinci: add CDCE949 support on DM6467 EVM davinci: add support for CDCE949 clock synthesizer davinci: da850/omap-l138 EVM: register for suspend support davinci: da850/omap-l138: add support for SoC suspend davinci: add power management support DaVinci: DM365: Changing default queue for DM365. ...
2010-03-01DaVinci DM365: Adding support for SPI EEPROMSandeep Paulraj
The DM365 Spectrum Digital EVM comes with an EEPROM connected to SPI0. This patch adds support for the SPI EEPROM. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01DaVinci DM365: Adding DM365 SPI supportSandeep Paulraj
This patch adds SPI init for DM365. It does the following 1) Initializes SPI0 2) Defines resources to be used by SPI0 3) Adds platform data for SPI0 Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01DaVinci DM355: Modifications to DM355 SPI supportSandeep Paulraj
This patch does the following 1) Minor change to the SPI clocks making it similar to DM365. 2) Changing the interrupt used by SPI0 3) Adding EDMA resources that can be used by SPI0 4) Adding platform specific data. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01DaVinci: SPI: Adding header file for SPI support.Sandeep Paulraj
This patch adds "spi.h" header file that will be used by board and architecture specific code. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookupKevin Hilman
Remove unneeded 'struct davinci_clk' wrapper around 'struct clk_lookup' and use clk_lookup directly. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-01Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits) ARM: Eliminate decompressor -Dstatic= PIC hack ARM: 5958/1: ARM: U300: fix inverted clk round rate ARM: 5956/1: misplaced parentheses ARM: 5955/1: ep93xx: move timer defines into core.c and document ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c ARM: 5953/1: ep93xx: fix broken build of clock.c ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig ARM: 5949/1: NUC900 add gpio virtual memory map ARM: 5948/1: Enable timer0 to time4 clock support for nuc910 ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk ARM: make_coherent(): fix problems with highpte, part 2 MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself ARM: 5945/1: ep93xx: include correct irq.h in core.c ARM: 5933/1: amba-pl011: support hardware flow control ARM: 5930/1: Add PKMAP area description to memory.txt. ARM: 5929/1: Add checks to detect overlap of memory regions. ARM: 5928/1: Change type of VMALLOC_END to unsigned long. ARM: 5927/1: Make delimiters of DMA area globally visibly. ARM: 5926/1: Add "Virtual kernel memory..." printout. ARM: 5920/1: OMAP4: Enable L2 Cache ... Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-02-26V4L/DVB: DaVinci - Adding platform & board changes for vpfe capture on DM365Murali Karicheri
This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: vpfe-capture: converting ccdc drivers to platform-driversMuralidharan Karicheri
This adds platform code for ccdc driver on DM355 and DM6446. 1) new ccdc platform devices added 2) added clock aliases master and slave for CCDC clocks 3) added dm355_ccdc_setup_pinmux() pin-mux setup hook in dm355 ccdc driver platform data Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-25Merge branch 'misc2' into develRussell King
2010-02-25Merge branch 'tmpreg' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/mach-ux500/include/mach/debug-macro.S
2010-02-15ARM: 5928/1: Change type of VMALLOC_END to unsigned long.Fenkart/Bostandzhyan
Makes it consistent with VMALLOC_START Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15ARM: Add caller information to ioremapRussell King
This allows the procfs vmallocinfo file to show who created the ioremap regions. Note: __builtin_return_address(0) doesn't do what's expected if its used in an inline function, so we leave __arm_ioremap callers in such places alone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren
Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-05Fix spelling of 'platform' in comments and docStefan Weil
Replace platfrom -> platform. This is a frequent spelling bug. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-04davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table()Kevin Hilman
Remove unneeded 'struct davinci_clk' wrapper around 'struct clk_lookup' and use clkdev_add_table() to add the list of clocks in one go. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04DaVinci: DM365: Voice codec support for the DM365 SoCMiguel Aguilar
This patch adds the generic Voice Codec support for the DM365 based platforms. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: clock: let clk->set_rate function sleepSekhar Nori
When supporting I2C/SPI based on-board PLLs like CDCE949, it is essential that clk->set_rate be able to sleep. Currently, this is not possible because clk->set_rate is called from within spin-lock in clk_set_rate This patch brings clk->set_rate outside of the spin-lock and lets the individual set_rate implementations achieve serialization through appropiate means. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04Add SDA and SCL pin numbers to i2c platform dataPhilby John
Patch adds SDA and SCL pin numbers to the i2c platform data structure for Davinci DM355 and DM6446. This at present is used for i2c bus recovery. TODO: Add SDA and SCL pin number information to include all Davinci platforms such as dm355-leopard, dm365, dm646x, da8xx etc. Signed-off-by: Philby John <pjohn@in.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138Sudhakar Rajashekhara
Currently da850/omap-l138 supports only one channel controller instance of EDMA though EDMA driver as such supports multiple channel controller instances. This patch adds platform data for the 2nd EDMA channel controller. As, the platform data differ between da830/omap-l137 and da850/omap-l138, existing code has been re-shuffled to accommodate this. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: build list of unused EDMA events dynamicallySudhakar Rajashekhara
Currently, the edma_noevent list is passed from platform data. But on some architectures, there will be many EDMA channels which will not be used at all. This patch scans all the platform devices and then builds a list of events which are not being used. The unused event list will be used to allocate EDMA channels in case of EDMA_CHANNEL_ANY usage instead of the edma_noevent being used earlier for this purpose. This patch is based on David Brownells's suggestion at http://article.gmane.org/gmane.linux.davinci/15176. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY caseSudhakar Rajashekhara
Though edma_alloc_channel api was looping through the available channel controllers in EDMA_CHANNEL_ANY case, it was never returning the channel for 2nd channel controller, if 1st channel controller had no free channels. This issue has been fixed with this patch. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: Keep count of channel controllers on a platformSudhakar Rajashekhara
Some architectures have only one channel controller, but the edma_alloc_channel api loops twice to findout the free channel available in EDMA_CHANNEL_ANY case. A new variable has been introduced to keep count of number of channel controllers being used on a particular architecture. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: Correct return value of edma_alloc_channel apiSudhakar Rajashekhara
Currently, edma_alloc_channel api is returning the channel number without prepending the controller on which the channel was allocated. So, if a channel is allocated on 2nd controller, calls subsequent to edma_alloc_channel would never know that channel was allocated on the 2nd controller, and continue to operate on 1st controller, resulting in edma failure. This patch fixes this issue. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: add CDCE949 support on DM6467 EVMNageswari Srinivasan
This patch adds the CDCE949 reference oscillator to the davinci clock list. On the DM6467T EVM, the CDCE949 is responsible for generating the pixel clock for display. On the DM6467 EVM, this pixel clock was being obtained from an internal source. This is not possible on the DM6467T EVM because of the presence of a 33MHz oscillator. The TSIF module also requires the CDCE949 to generate the data clocks. The actual clock definitions will be added by patches adding support for DM6467T VPIF and TSIF. This patch mearly lays the foundation for that work. Signed-off-by: Nageswari Srinivasan <nageswari@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: add support for CDCE949 clock synthesizerNageswari Srinivasan
This patch adds support for TI's CDCE949 - a clock synthesizer with 4 PLLs and 9 outputs. It is used on DM6467 EVM. On the EVM, it generates clocks required for VPIF, TSIF and Audio modules. This patch adds it as part of the DaVinci clock framework. Testing: The various frequency outputs on Y1 have been tested using a out-of-tree VPIF video driver supporting HD video. The register values for Y5 frequency outputs have been derived from TSIF driver sources in MontaVista LSP kernel, but actual output has not been tested for lack of TSIF driver which actually works on the latest kernel. Signed-off-by: Nageswari Srinivasan <nageswari@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: da850/omap-l138 EVM: register for suspend supportSekhar Nori
Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: da850/omap-l138: add support for SoC suspendSekhar Nori
This patch adds support for registering for suspend-to-RAM functionality on da850/omap-l138 SoCs. da850 supports wakeup based on external event and RTC alarm. Currently only RTC alarm based wakeup is supported. Support for wakeup based on external event will be added as later improvements. For scheduling an alarm event on RTC some useful code is present in Documentation/rtc.txt Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: add power management supportSekhar Nori
This patch adds core power management (suspend-to-RAM) support for DaVinci SoCs. The code depends on the the "deepsleep" feature to suspend the SoC and saves power by gating the input clock. The wakeup can be based on an external event as supported by the SoC. Assembly code (in sleep.S) is added to aid gating DDR2 clocks. Code doing this work should not be accessing DDR2. The assembly code is relocated to SRAM by the code in pm.c The support has been validated on DA850/OMAP-L138 only though the code is (hopefully) generic enough that other SoCs supporting deepsleep feature simply requires SoC specific code to start using this driver. Note that all the device drivers don't support suspend/resume still and are being worked on. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04DaVinci: DM365: Changing default queue for DM365.Sandeep Paulraj
In DM365 Q0, Q1 and Q2 are used by codecs. LSP drivers should use Q3. This patch changes the default queue for DM365. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: clock: Check CLK_PSC flag before disabling PSCChaithrika U S
Some modules do not have PSC to control their clocks. The 'lpsc' field in the clk structure is 0 for such clocks. In the clock disable function check for CLK PSC flag before disabling the PSC. If this is not taken care of then it may so happen that module controlled by LPSC 0 is erroneously disabled. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04TI Davinci EMAC : Re-use driver for other platforms.Sriramakrishnan
The davinci EMAC peripheral is also available on other TI platforms -notably TI AM3517 SoC. This patch modifies the config option and the platform structure header files so that the driver can be reused on non-davinci platforms as well. Signed-off-by: Sriramakrishnan <srk@ti.com> Acked-by: Chaithrika U S <chaithrika@ti.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: da850/omap-l138: Enable 4-bit eccSudhakar Rajashekhara
This patch initializes the platform data to enable 4-bit ecc support on DA850/OMAP-L138. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: da850/omap-l138: Modify NOR partition infoSudhakar Rajashekhara
On DA850/OMAP-L138, NOR flash partition was starting from offset ZERO erasing the UBL and u-boot when the complete NOR is erased. This patch moves the start of the partition to 512K, after the bootloaders and u-boot env variables. This patch also creates a new partition on NOR Flash to store Linux kernel image. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: move /proc/davinci_clocks to debugfsSekhar Nori
Move /proc/davinci_clocks to /sys/kernel/debug/davinci_clocks (debugfs). debugfs is more suited for this since the clock dump is debug information. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: make /proc/davinci_clocks display multi-rooted clock treeSekhar Nori
This patch modifies clock dump to take care of clock tress rooted at multiple oscillators. Current code assumes the entire tree is rooted on a single oscillator. When using off-chip clock synthesizers, some of the clocks can be obtained from a different on-board oscillator. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: add support for DM6467T EVMSekhar Nori
DM6467T (T for Turbo) is a newer and faster DM6467 part from TI. The new part supports 1080p video and has the ARM running at 495MHz. More SoC information: http://focus.ti.com/docs/prod/folders/print/tms320dm6467t.html Spectrum Digital, Inc has a new EVM for this part. It is _mostly_ same as the older DM6467 EVM except for a 33MHz crystal input and THS8200 video encoder for 1080p support. The meat of this patch is dedicated to initializing the crystal frequency from EVM board file. Additional notes: I did consider some alternative ways to make the crystal input board specific including - (1) having board code initialize the crystal frequency using the first member of soc_info->cpu_clks array (2) introducing a new ref_clk_rate member in soc_info structure. But, the current way seems to be the simplest and least intruding considering that both the clock array and SoC info structure are actually private to the SoC file. Also the fact that davinci_common_init() initializes both the soc_info and clocks in one go. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: board-dm646x-evm.c: arrange related code togetherSekhar Nori
Currently all the #defines and static variables in the board-dm646x-evm.c file are located right at the start of the file because of which the related code is not together - making reading the code difficult. This patch moves around the code keeping related code together. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.hSekhar Nori
Leave a comment explaining the constant value of 27Mhz used in include/mach/timex.h for all DaVinci platforms. Many of the platforms actually run at 24MHz timer frequency (Eg. EVMs of DM355, DM365 and OMAP-L1). The comment also serves as a porting alert. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: da850/omap-l138: create static map for SRAMSekhar Nori
Create static map for internal SRAM and populate SRAM base and size in soc_info structure to allow SRAM allocation functions from arch/arm/mach-davinci/sram.c to work. On DA850 SRAM is used for suspend-to-RAM implementation in places where DDR2 cannot be accessed as its clocks are stopped. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: da850/omap-l138: unlock PLL registers during initSekhar Nori
On omap-l1 devices the PLL registers can be locked from writes. Currently the cpufreq rate setting code unlocks PLL0 before the write actually happens. With suspend support getting added PLL1 registers need be be unlocked as well. To facilitate this, unlock both PLLs during the init time itself. This also obviates the need to unlock PLL registers for each CPUFreq transtition. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: cpuidle: move mapping of DDR2 controller registers out of driverSekhar Nori
When suspend is supported, both cpuidle and suspend code need to work on DDR2 registers. Instead of mapping the DDR2 registers twice, do it once outside of cpuidle driver and let cpuidle driver get the virtual base address of DDR2 registers. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>