summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ep93xx
AgeCommit message (Collapse)Author
2013-09-12Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A small batch of fixes that have trickled in over the last week of the merge window. Also included are few small devicetree updates for sunxi, since it enables me to use one of their newer boards (cubieboard2) for additional test coverage. The support for that SoC is new for 3.12, so there's no exposure to new regressions due to it" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: sun7i: olinuxino-micro: Enable the EMAC ARM: dts: sun7i: cubieboard2: Enable the EMAC ARM: dts: sun7i: Add the muxing options for the EMAC ARM: dts: sun7i: Enable the Ethernet in the A20 i2c: davinci: Fix bad dev_get_platdata() conversion ARM: vexpress: allow dcscb and tc2_pm in a combined ARMv6+v7 build ARM: shmobile: lager: Do not use register_type field of struct sh_eth_plat_data ARM: pxa: ssp: Check return values from phandle lookups ARM: PCI: versatile: Fix SMAP register offsets ARM: PCI: versatile: Fix PCI I/O ARM: PCI: versatile: Fix map_irq function to match hardware ARM: ep93xx: Don't use modem interface on the second UART ARM: shmobile: r8a7779: Update early timer initialisation order
2013-09-11Merge tag 'ep93xx-fixes-for-3.12' of ↵Olof Johansson
git://github.com/RyanMallon/linux-ep93xx into fixes From Ryan Mallon, a fix for ep93xx. * tag 'ep93xx-fixes-for-3.12' of git://github.com/RyanMallon/linux-ep93xx: ARM: ep93xx: Don't use modem interface on the second UART Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-10Merge tag 'mmc-updates-for-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.12: Core: - Support Allocation Units 8MB-64MB in SD3.0, previous max was 4MB. - The slot-gpio helper can now handle GPIO debouncing card-detect. - Read supported voltages from DT "voltage-ranges" property. Drivers: - dw_mmc: Add support for ARC architecture, and support exynos5420. - mmc_spi: Support CD/RO GPIOs. - sh_mobile_sdhi: Add compatibility for more Renesas SoCs. - sh_mmcif: Add DT support for DMA channels" * tag 'mmc-updates-for-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (50 commits) Revert "mmc: tmio-mmc: Remove .set_pwr() callback from platform data" mmc: dw_mmc: Add support for ARC mmc: sdhci-s3c: initialize host->quirks2 for using quirks2 mmc: sdhci-s3c: fix the wrong register value, when clock is disabled mmc: esdhc: add support to get voltage from device-tree mmc: sdhci: get voltage from sdhc host mmc: core: parse voltage from device-tree mmc: omap_hsmmc: use the generic config for omap2plus devices mmc: omap_hsmmc: clear status flags before starting a new command mmc: dw_mmc: exynos: Add a new compatible string for exynos5420 mmc: sh_mmcif: revision-specific CLK_CTRL2 handling mmc: sh_mmcif: revision-specific Command Completion Signal handling mmc: sh_mmcif: add support for Device Tree DMA bindings mmc: sh_mmcif: move header include from header into .c mmc: SDHI: add DT compatibility strings for further SoCs mmc: dw_mmc-pci: enable bus-mastering mode mmc: dw_mmc-pci: get resources from a proper BAR mmc: tmio-mmc: Remove .set_pwr() callback from platform data mmc: tmio-mmc: Remove .get_cd() callback from platform data mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data ...
2013-09-06Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK gpio: (gpio-pca953x) move header to linux/platform_data/ arm: zynq: hotplug: Remove unreachable code ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() tegra: simplify use of devm_ioremap_resource ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver ARM: mach-mvebu: remove redundant DT parsing and validation ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ...
2013-09-03ARM: ep93xx: Don't use modem interface on the second UARTPetr Štetiar
Second UART doesn't have modem interface, so any attempt to use set_mctrl() it produce unwanted garbage on the line. There's no such 0x100 register offset for the second UART either. Signed-off-by: Petr Štetiar <ynezz@true.cz> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2013-08-29gpio: (gpio-pca953x) move header to linux/platform_data/Vivien Didelot
This patch moves the pca953x.h header from include/linux/i2c to include/linux/platform_data and updates existing support accordingly. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-25ARM: 7793/1: debug: use generic option for ep93xx PL10x debug portHartley Sweeten
The generic option DEBUG_LL_UART_PL01X is now used to select the UART type for the kernel low-level debugging on the ep93xx platform. This enables two config options to provide the physical and virtual base address of the debug UART. Use the generic options instead of providing platform specific options to select the debug UART. UART1 is selected with: DEBUG_UART_PHYS = 0x808c0000 DEBUG_UART_VIRT = 0xfedc0000 UART2 is selected with: DEBUG_UART_PHYS = 0x808d0000 DEBUG_UART_VIRT = 0xfedd0000 UART3 is selected with: DEBUG_UART_PHYS = 0x808e0000 DEBUG_UART_VIRT = 0xfede0000 The selected UART must already be initialized by the bootloader. If it isn't setup nothing will appear (which might be desired). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25ARM: debug: move PL01X debug include into arch/arm/include/debug/Russell King
Now that the PL01X debug include can mostly stand alone without requiring platforms to provide any macros, move it into the debug directory so it can be directly included. This allows us to get rid of a lot of debug-macros include files. The autodetect case for Versatile Express and the ux500 are left alone; these are more complicated implementations. Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25ARM: debug: provide PL01x debug uart phys/virt address configuration optionsRussell King
Move the definition of the UART register addresses out of the platform specific header files into the Kconfig files. Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-25ARM: ep93xx: vision_ep9307: Use MMC CD and RO GPIOLaurent Pinchart
Pass the CD and RO GPIO numbers to the MMC SPI driver and remove the custom .get_cd() and .get_ro() callback functions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-09reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-17ARM: ep93xx: Fix wait for UART FIFO to be emptyH Hartley Sweeten
Commit 210dce5f "ARM: ep93xx: properly wait for UART FIFO to be empty" Removed the timeout loop while waiting for the uart transmit fifo to empty. Some bootloaders leave the uart in a state where there might be bytes in the uart that are not transmitted when execution is handed over to the kernel. This results in a deadlocked system while waiting for the fifo to empty. Add back the timeout wait to prevent the deadlock. Increase the wait time to hopefully prevent the decompressor corruption that lead to commit 210dce5f. This corruption was probably due to a slow uart baudrate. The 10* increase in the wait time should be enough for all cases. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2013-02-05Merge tag 'cleanup-decompwdog-3.9' of ↵Olof Johansson
git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup From Shawn Guo: The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which are unused on ARM architecure. Samsung has some code setting up wdog in arch_decomp_wdog(). But since CONFIG_S3C_BOOT_WATCHDOG is defined nowhere, it will not run. Otherwise, system can not boot at all when wdog is set up but no one pats it. * tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: samsung: remove unused arch_decomp_wdog() code ARM: remove unused arch_decomp_wdog() ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-15Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson
into next/cleanup From Rob Herring: Initial irqchip init infrastructure and GIC and VIC clean-ups This creates irqchip initialization infrastructure from Thomas Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips and adapted to use the new infrastructure. All DT enabled platforms using GIC and VIC are converted over to use the new irqchip_init. * tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux: irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ARM: GIC: remove assembly ifdefs from gic.h ARM: mach-ux500: use SGI0 to wake up the other core arm: add set_handle_irq() to register the parent IRQ controller handler function irqchip: add basic infrastructure irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS Fixed up massive merge conflicts with the timer cleanup due to adjacent changes: Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-bcm/board_bcm.c arch/arm/mach-cns3xxx/cns3420vb.c arch/arm/mach-ep93xx/adssphere.c arch/arm/mach-ep93xx/edb93xx.c arch/arm/mach-ep93xx/gesbc9312.c arch/arm/mach-ep93xx/micro9.c arch/arm/mach-ep93xx/simone.c arch/arm/mach-ep93xx/snappercl15.c arch/arm/mach-ep93xx/ts72xx.c arch/arm/mach-ep93xx/vision_ep9307.c arch/arm/mach-highbank/highbank.c arch/arm/mach-imx/mach-imx6q.c arch/arm/mach-msm/board-dt-8960.c arch/arm/mach-netx/nxdb500.c arch/arm/mach-netx/nxdkn.c arch/arm/mach-netx/nxeb500hmi.c arch/arm/mach-nomadik/board-nhk8815.c arch/arm/mach-picoxcell/common.c arch/arm/mach-realview/realview_eb.c arch/arm/mach-realview/realview_pb1176.c arch/arm/mach-realview/realview_pb11mp.c arch/arm/mach-realview/realview_pba8.c arch/arm/mach-realview/realview_pbx.c arch/arm/mach-socfpga/socfpga.c arch/arm/mach-spear13xx/spear1310.c arch/arm/mach-spear13xx/spear1340.c arch/arm/mach-spear13xx/spear13xx.c arch/arm/mach-spear3xx/spear300.c arch/arm/mach-spear3xx/spear310.c arch/arm/mach-spear3xx/spear320.c arch/arm/mach-spear3xx/spear3xx.c arch/arm/mach-spear6xx/spear6xx.c arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-u300/core.c arch/arm/mach-ux500/board-mop500.c arch/arm/mach-ux500/cpu-db8500.c arch/arm/mach-versatile/versatile_ab.c arch/arm/mach-versatile/versatile_dt.c arch/arm/mach-versatile/versatile_pb.c arch/arm/mach-vexpress/v2m.c include/asm-generic/vmlinux.lds.h
2013-01-12irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.hRob Herring
Now that we have VIC moved to drivers/irqchip and all VIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org
2013-01-12ARM: remove unneeded vic.h includesRob Herring
Numerous includes of asm/hardware/vic.h aren't needed, so remove them. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Hubert Feurstein <hubert.feurstein@contec.at> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-By: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-samsung-soc@vger.kernel.org Cc: patches@opensource.wolfsonmicro.com Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-12ARM: remove mach .handle_irq for VIC usersRob Herring
Now that the VIC initialization sets up the handle_arch_irq pointer, we can remove it for all machines and make it static. Move vic_handle_irq to avoid a forward declaration. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Hubert Feurstein <hubert.feurstein@contec.at> Cc: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-11ARM: remove unused arch_decomp_wdog()Shawn Guo
With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c, all the arch_decomp_wdog() definition at platform level is unneeded. Remmove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-12-24ARM: delete struct sys_timerStephen Warren
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24ARM: set arch_gettimeoffset directlyStephen Warren
remove ARM's struct sys_timer .offset function pointer, and instead directly set the arch_gettimeoffset function pointer when the timer driver is initialized. This requires multiplying all function results by 1000, since the removed arm_gettimeoffset() did this. Also, s/unsigned long/u32/ just to make the function prototypes exactly match that of arch_gettimeoffset. Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-12ARM: ep93xx: properly wait for UART FIFO to be emptyFlorian Fainelli
This patch changes the busy-waiting loop around in the decompressor putc() function on the UART FIFO register. Without a proper wait, the output of the decompressor was corrupted like this: Uncompressing Linx. done, booting th enl To highlight the issue more evidently, looping 100 times instead of 1000 makes the issue appear much faster. This patch takes the approach of using an active while loop until the FIFO is empty (not FULL). This issue happened to me on Sim.One running at 200Mhz. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-10-02Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-09-22Merge branch 'multiplatform/platform-data' into next/multiplatformOlof Johansson
* multiplatform/platform-data: ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions Conflicts due to removed files: arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to code removal: arch/arm/mach-tegra/board-paz00.c Context conflicts in: drivers/mmc/host/sdhci-tegra.c drivers/net/irda/pxaficp_ir.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-16ARM: ep93xx: Move ts72xx.h out of include/machRyan Mallon
The ts72xx.h header is only included by arch/arm/mach-ep93xx/ts72xx.c. It therefore does not need to be in the globally exported include/mach directory. Move it to to arch/arm/mach-ep93xx. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-16ARM: ep93xx: use __iomem pointers for MMIOArnd Bergmann
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. Cc: Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-09-14ARM: make mach/gpio.h headers optionalRob Herring
Most platforms don't need mach/gpio.h and it prevents multi-platform kernel images. Add CONFIG_NEED_MACH_GPIO_H and make platforns select it if they need gpio.h. This is platforms that define __GPIOLIB_COMPLEX or have lots of implicit includes pulled in by mach/gpio.h. at91 and omap have gpio clean-up pending and can drop CONFIG_NEED_MACH_GPIO_H once that is in. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-14ARM: ep93xx: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the ep93xx include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Axel Lin <axel.lin@gmail.com>
2012-09-07ARM: ep93xx: Fix build error due to 'SZ_32M' undeclaredAxel Lin
Include linux/sizes.h to fix below build errors: CC arch/arm/mach-ep93xx/adssphere.o arch/arm/mach-ep93xx/adssphere.c: In function 'adssphere_init_machine': arch/arm/mach-ep93xx/adssphere.c:32:49: error: 'SZ_32M' undeclared (first use in this function) arch/arm/mach-ep93xx/adssphere.c:32:49: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [arch/arm/mach-ep93xx/adssphere.o] Error 1 make: *** [arch/arm/mach-ep93xx] Error 2 CC arch/arm/mach-ep93xx/gesbc9312.o arch/arm/mach-ep93xx/gesbc9312.c: In function 'gesbc9312_init_machine': arch/arm/mach-ep93xx/gesbc9312.c:32:49: error: 'SZ_8M' undeclared (first use in this function) arch/arm/mach-ep93xx/gesbc9312.c:32:49: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [arch/arm/mach-ep93xx/gesbc9312.o] Error 1 make: *** [arch/arm/mach-ep93xx] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-07-23Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm soc-specific updates from Arnd Bergmann: "This is stuff that does not fit well into another category and in particular is not related to a particular board. The largest part in here is extending the am33xx support in the omap platform." Fix up trivial conflicts in arch/arm/mach-{imx/mach-mx35_3ds.c, tegra/Makefile} * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits) ARM: LPC32xx: Add PWM support ARM: LPC32xx: Add PWM clock ARM: LPC32xx: Set system serial based on cpu unique id ARM: vexpress: Config option for early printk console ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tile ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addresses ARM: vexpress: Add fixed regulator for SMSC ARM: vexpress: Add missing SP804 interrupt in motherboard's DTS files ARM: vexpress: Initial common clock support ARM: SAMSUNG: Introduce Kconfig variable for Samsung custom clk API ARM: EXYNOS: Add missing static storage class specifier in pmu.c file ARM: EXYNOS: Make combiner_init function static ARM: EXYNOS: Update HSOTG PHY clock setting for EXYNOS4X12 ARM: versatile: Make plat-versatile clock optional ARM: vexpress: Check master site in daughterboard's sysctl operations ARM: vexpress: remove automatic errata workaround selection ARM: LPC32xx: Adjust to pl08x DMA interface changes ARM: EXYNOS: Clear SYS_WDTRESET bit to use watchdog reset ARM: imx: fix mx51 ehci setup errors ARM: imx: make ehci power/oc polarities configurable ...
2012-06-10arm: ep93xx: Enable i2c support for ep9302Todor Colov
Enable i2c support for ep9302. i2c support is needed when external RTC is used. Signed-off-by: Todor Colov <todorcolov@gmail.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-06-04ep93xx: Add IDE support to edb93xx boardsRafal Prylowski
Add IDE support to edb93xx boards. Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-06-04ep93xx: IDE driver platform support codeRafal Prylowski
Add IDE driver platform support code for ep93xx. Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-06-01Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
2012-05-26Merge tag 'cleanup-initcall' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson: "This is a patch series from Shawn Guo that moves from individual late_initcalls() to using a member in the machine structure to invoke a platform's late initcalls. This cleanup is a step in the move towards multiplatform kernels since it would reduce the need to check for compatible platforms in each and every initcall." Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c, imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and, in the case of cpuimx51.c the board support being deleted) * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: use machine specific hook for late init ARM: tegra: use machine specific hook for late init ARM: shmobile: use machine specific hook for late init ARM: sa1100: use machine specific hook for late init ARM: s3c64xx: use machine specific hook for late init ARM: prima2: use machine specific hook for late init ARM: pnx4008: use machine specific hook for late init ARM: omap2: use machine specific hook for late init ARM: omap1: use machine specific hook for late init ARM: msm: use machine specific hook for late init ARM: imx: use machine specific hook for late init ARM: exynos: use machine specific hook for late init ARM: ep93xx: use machine specific hook for late init ARM: davinci: use machine specific hook for late init ARM: provide a late_initcall hook for platform initialization
2012-05-26Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc driver specific updates from Olof Johansson: "These changes are specific to some driver that may be used by multiple boards or socs. The most significant change in here is the move of the samsung iommu code from a platform specific in-kernel interface to the generic iommu subsystem." Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mmc: dt: Consolidate DT bindings iommu/exynos: Add iommu driver for EXYNOS Platforms ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice ARM: tegra: Add SMMU enabler in AHB ARM: tegra: Add Tegra AHB driver Input: pxa27x_keypad add choice to set direct_key_mask Input: pxa27x_keypad direct key may be low active Input: pxa27x_keypad bug fix for direct_key_mask Input: pxa27x_keypad keep clock on as wakeup source ARM: dt: tegra: pinmux changes for USB ULPI ARM: tegra: add USB ULPI PHY reset GPIO to device tree ARM: tegra: don't hard-code USB ULPI PHY reset_gpio ARM: tegra: change pll_p_out4's rate to 24MHz ARM: tegra: fix pclk rate ARM: tegra: reparent sclk to pll_c_out1 ARM: tegra: Add pllc clock init table ARM: dt: tegra cardhu: basic audio support ARM: dt: tegra30.dtsi: Add audio-related nodes ARM: tegra: add AUXDATA required for audio ...
2012-05-14mtd: nand: kill NAND_NO_AUTOINCR optionBrian Norris
No drivers use auto-increment NAND, so kill the NO_AUTOINCR option entirely. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-05-14arm: Use the plat_nand default partition parserH Hartley Sweeten
Use the default partition parser, cmdlinepart, provided by the plat_nand driver. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-05-05ARM: ep93xx: use machine specific hook for late initShawn Guo
Cc: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
2012-04-11arm: ep93xx: use gpio_led_register_deviceH Hartley Sweeten
Use gpio_led_register_device to register the two leds connected to the ep93xx. Since this is a common feature for all ep93xx based boards, create a new Kconfig option, EP93XX_SOC_COMMON, to select the LEDS_GPIO_REGISTER feature. The struct gpio_led and struct gpio_led_platform_data variables have been changed to const struct because of: commit 9517f925f2eb9ffca78b3f0f9389fc675bcb572c leds: make *struct gpio_led_platform_data.leds const They have also been marked as __initconst because the helper function gpio_led_register_device makes a deep copy of the platform data to allow it to live in init memory: commit 4440673a95e63ad888a41db596edaa0c55d3a332 leds: provide helper to register "leds-gpio" devices Signed-off-by: Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-04-11Fix build breakage in ep93xx-coreRyan Mallon
Commit ede55aaa8bb2dd37e302b2f94312306d216e5f97 "arm: ep93xx: use DEFINE_RES_* macros" introduced a build breakage in ep93xx due to a typo. Fix it. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com>
2012-04-11arm: ep93xx: Don't try to release not acquired GPIO linesRafal Prylowski
Fail path of ep93xx_keypad_acquire_gpio() tries to release GPIO lines not acquired successfully before. Fix this. Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-04-11arm: ep93xx: use DEFINE_RES_* macrosH Hartley Sweeten
Use the DEFINE_RES_* macros to reduce some of the boilerplate code. Signed-off-by: Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-03-30Merge tag 'cleanup2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: cleanups of io includes" from Olof Johansson: "Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes, moving some of the oft-repeated macros to a common location and removing a bunch of boiler plate. This is another step closer to a common zImage for multiple platforms." Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes around it, tegra localtimer.o is *still* gone, yadda-yadda). * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: tegra: Include assembler.h in sleep.S to fix build break ARM: pxa: use common IOMEM definition ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol ARM: __io abuse cleanup ARM: create a common IOMEM definition ARM: iop13xx: fix missing declaration of iop13xx_init_early ARM: fix ioremap/iounmap for !CONFIG_MMU ARM: kill off __mem_pci ARM: remove bunch of now unused mach/io.h files ARM: make mach/io.h include optional ARM: clps711x: remove unneeded include of mach/io.h ARM: dove: add explicit include of dove.h to addr-map.c ARM: at91: add explicit include of hardware.h to uncompressor ARM: ep93xx: clean-up mach/io.h ARM: tegra: clean-up mach/io.h ARM: orion5x: clean-up mach/io.h ARM: davinci: remove unneeded mach/io.h include [media] davinci: remove includes of mach/io.h ARM: OMAP: Remove remaining includes for mach/io.h ARM: msm: clean-up mach/io.h ...
2012-03-15Merge branch 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6 ↵Arnd Bergmann
into next/cleanup * 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6: ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file (update to v3.3-rc7) Conflicts: arch/arm/mach-s3c2440/common.h
2012-03-14ARM: create a common IOMEM definitionRob Herring
Several platforms create IOMEM defines for casting to 'void __iomem *', and other platforms are incorrectly using __io() macro for the same purpose. This creates a common definition and removes all the platform specific versions. Rather than try to make linux/io.h and asm/io.h assembly safe, the assembly version of IOMEM is moved into asm/assembler.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> Cc: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-14ep93xx: Remove unnecessary includes of ep93xx-regs.hRyan Mallon
Remove the include of ep93xx-regs.h from files which no longer need it, notably include/mach/hardware.h. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com>
2012-03-14ep93xx: Move EP93XX_SYSCON defines to SoC private headerRyan Mallon
The EP93XX_SYSCON defines are now no longer needed outside of the EP93xx SoC core code, so they can be moved to a private header. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com>
2012-03-14ep93xx: Move crunch code to mach-ep93xx directoryRyan Mallon
The crunch code in arch/arm/kernel is specific to the EP93xx. Move it to the mach-ep93xx directory. This removes the need for the EP93XX_SYSCON defines to be exported to arch/arm/kernel. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com>
2012-03-14ep93xx: Make syscon access functions private to SoCRyan Mallon
The syscon access functions are no longer used outside of the core EP93xx code. Move their definitions into the SoC code. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com>
2012-03-14ep93xx: Configure GPIO ports in core codeRyan Mallon
Move the pinmux setting of the EP93xx GPIOs to the core code. This removes the need for the GPIO driver to have access to the system controller registers. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com>