summaryrefslogtreecommitdiff
path: root/arch/arm/mach-integrator
AgeCommit message (Collapse)Author
2013-02-21Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
2013-02-14Merge branch 'warning-fixes' into next/fixes-non-criticalArnd Bergmann
These are fixes for compiler warnings that for the most part were introduced during the 3.8 cycle but are otherwise harmless. * warning-fixes: scripts/sortextable: silence script output ARM: s3c: i2c: add platform_device forward declaration ARM: mvebu: allow selecting mvebu without Armada XP ARM: pick Versatile by default for !MMU ARM: integrator: fix build with INTEGRATOR_AP off ARM: integrator/versatile: fix NOMMU warnings ARM: sa1100: don't warn about mach/ide.h ARM: shmobile: fix defconfig warning on CONFIG_USB ARM: w90x900: fix legacy assembly syntax ARM: samsung: fix assembly syntax for new gas ARM: disable virt_to_bus/virt_to_bus almost everywhere Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-14ARM: integrator: fix build with INTEGRATOR_AP offArnd Bergmann
The conditional declaration of ap_uart_data is broken and causes this build error: In file included from arch/arm/mach-integrator/core.c:35:0: arch/arm/mach-integrator/common.h:6:37: error: expected '=', ',', ';', 'asm' or '__attribute__' before '{' token Turning the check into an constant-expression if(IS_ENABLED()) statement creates more readable code and solves this problem as well. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk>
2013-02-14ARM: integrator/versatile: fix NOMMU warningsArnd Bergmann
On NOMMU kernels, the io_desc variables are unused because we don't use the MMU to remap the MMIO areas. Marking these variables as __maybe_unused easily avoids the otherwise harmless warnings like warning: 'versatile_io_desc' defined but not used Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk>
2013-02-10ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMUWill Deacon
When running on Integrator/AP using atags, ap_syscon_base is initialised in ->map_io, which isn't called for !MMU platforms. Instead, initialise the pointer in ->machine_init, as we do when booting with device-tree. Cc: stable@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-05Merge tag 'cleanup-decompwdog-3.9' of ↵Olof Johansson
git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup From Shawn Guo: The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which are unused on ARM architecure. Samsung has some code setting up wdog in arch_decomp_wdog(). But since CONFIG_S3C_BOOT_WATCHDOG is defined nowhere, it will not run. Otherwise, system can not boot at all when wdog is set up but no one pats it. * tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: samsung: remove unused arch_decomp_wdog() code ARM: remove unused arch_decomp_wdog() ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-28Merge tag 'v3.8-rc5' into next/cleanupOlof Johansson
Linux 3.8-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-11ARM: integrator: move syscon remap for AP PCIv3Linus Walleij
The Integrator/AP syscon remapping was done in the .setup() function rather than .preinit() which is wrong - .preinit() is called before .setup() and the former also use the syscon base and cause a crash since it was not yet remapped. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-11ARM: remove unused arch_decomp_wdog()Shawn Guo
With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c, all the arch_decomp_wdog() definition at platform level is unneeded. Remmove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-12-24ARM: delete struct sys_timerStephen Warren
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-12Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-12-12Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Here's the updates for ARM for this merge window, which cover quite a variety of areas. There's a bunch of patch series from Will tackling various bugs like the PROT_NONE handling, ASID allocation, cluster boot protocol and ASID TLB tagging updates. We move to a build-time sorted exception table rather than doing the sorting at run-time, add support for the secure computing filter, and some updates to the perf code. We also have sorted out the placement of some headers, fixed some build warnings, fixed some hotplug problems with the per-cpu TWD code." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (73 commits) ARM: 7594/1: Add .smp entry for REALVIEW_EB ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets. ARM: 7595/1: syscall: rework ordering in syscall_trace_exit ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch. ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6 ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only ARM: 7587/1: implement optimized percpu variable access ARM: 7589/1: integrator: pass the lm resource to amba ARM: 7588/1: amba: create a resource parent registrator ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected ARM: gic: use a private mapping for CPU target interfaces ARM: kernel: add logical mappings look-up ARM: kernel: add cpu logical map DT init in setup_arch ARM: kernel: add device tree init map function ...
2012-12-03ARM: 7589/1: integrator: pass the lm resource to ambaLinus Walleij
This passes the lm resource to register the AMBA devices on the LM as contained within the LM resource. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-21clk: move IM-PD1 clocks to drivers/clkLinus Walleij
The ARM IM-PD1 add-on module has a few clock of its own, let's move also these down to the drivers/clk/versatile driver dir and get rid of any remaining oldschool Integrator clocks. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-11-17ARM: integrator: use BUG_ON where possibleSasha Levin
Just use BUG_ON() instead of constructions such as: if (...) BUG() A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - if (e) BUG(); + BUG_ON(e); // </smpl> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17ARM: integrator: push down SC dependenciesLinus Walleij
This pushes the dependencies on the Integrator/AP system controller (SC) down into the PCI V3 driver and the AP-specific board file. First, the platform data for the PL010 UART is moved into the integrator_ap.c board file, and the Integrator/CP is assigned with NULL pdata. This way the callback functions can reference the dynamically remapped AP syscon address in both the ATAG and DT boot path, and this remapping is localized to the board file. Second the PCIv3 driver is making its own dynamic remapping of the SC for the few registers it is using. When we convert the PCIv3 driver over to using device tree having a dynamically assigned base address will be useful, but we will have to use the definition from <mach/platform.h> for now, the only improvement is that it's done dynamically. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-16ARM: integrator: delete static UART1 mappingLinus Walleij
The Integrators does not use the UART1 for any debugging or similar, dynamic mapping should be all that is needed so delete this static map. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-16ARM: integrator: delete SC mapping on the CPLinus Walleij
The Integrator/CP does not use the address space defined as used by the Integrator/AP system controller, it's just unused memory. So just delete this static mapping from the CP static mapping table. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-16ARM: integrator: remove static CP syscon mappingLinus Walleij
This removes the static mapping for the CP system controller for the device tree case. Fork the static mappings table and move the system controller to only be statically mapped in the ATAG boot path. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-16ARM: integrator: remove static AP syscon mappingLinus Walleij
This removes the static mapping for the AP system controller for the device tree case. Fork the static mappings table and move the system controller to only be statically mapped in the ATAG boot path. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-16ARM: integrator: hook the CP into the SoC busLinus Walleij
This hooks the Integrator/CP into the SoC bus when booting from device tree, by mapping the CP controller registers first, then registering the SoC device, and then populating the device tree with the SoC device as parent. Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-16ARM: integrator: hook the AP into the SoC busLinus Walleij
This hooks the Integrator/AP into the SoC bus when booting from device tree, by mapping the AP controller registers first, then registering the SoC device, and then populating the device tree with the SoC device as parent. Introduce some helpers in the core to provide sysfs files detailing the use of the SoC ID which will later be reused by the Integrator/CP patch for the same bus grouping. Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-04ARM: plat-versatile: move FPGA irq driver to drivers/irqchipLinus Walleij
This moves the Versatile FPGA interrupt controller driver, used in the Integrator/AP, Integrator/CP and some Versatile boards, out of arch/arm/plat-versatile and down to drivers/irqchip where we have consensus that such drivers belong. The header file is consequently moved to <linux/platform_data/irq-versatile-fpga.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26ARM: integrator: get rid of preallocated irq descriptorsLinus Walleij
The Integrators were using the .nr_irqs field of the machine descriptor to pre-allocate a number of descriptors at boot. This is not right: the irq chip implementations should allocate their descriptors themselves, and as a result the simple irqdomain code warns about it. Get rid of this by just deleting the .nr_irq field from the machine descriptors but take care: doing so makes the default implementation hog the first 16 IRQ numbers, so these cannot be used by the still static IRQ number assignments in the ATAG boot case. So for these, bump the IRQ numbers to begin at 64 and upward. Introduce an offset to offset all IRQ numbers if need be, though we don't expect to do that again as device tree comes along. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-09ARM: integrator: use __iomem pointers for MMIO, part 2Arnd Bergmann
Due to some interesting merges in the integrator code, not all users of mmio pointers were converted before, this fixes all warnings that got introduced as a consequence. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-07Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "This is the first chunk of ARM updates for this merge window. Conflicts are expected in two files - asm/timex.h and mach-integrator/integrator_cp.c. Nothing particularly stands out more than anything else. Most of the growth is down to the opcodes stuff from Dave Martin, which is countered by Rob's patches to use more of the asm-generic headers on ARM." (A few more conflicts grew since then, but it all looked fairly trivial) * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (44 commits) ARM: 7548/1: include linux/sched.h in syscall.h ARM: 7541/1: Add ARM ERRATA 775420 workaround ARM: ensure vm_struct has its phys_addr member filled in ARM: 7540/1: kexec: Check segment memory addresses ARM: 7539/1: kexec: scan for dtb magic in segments ARM: 7538/1: delay: add registration mechanism for delay timer sources ARM: 7536/1: smp: Formalize an IPI for wakeup ARM: 7525/1: ptrace: use updated syscall number for syscall auditing ARM: 7524/1: support syscall tracing ARM: 7519/1: integrator: convert platform devices to Device Tree ARM: 7518/1: integrator: convert AMBA devices to device tree ARM: 7517/1: integrator: initial device tree support ARM: 7516/1: plat-versatile: add DT support to FPGA IRQ ARM: 7515/1: integrator: check PL010 base address from resource ARM: 7514/1: integrator: call common init function from machine ARM: 7522/1: arch_timers: register a time/cycle counter ARM: 7523/1: arch_timers: enable the use of the virtual timer ARM: 7531/1: mark kernelmode mem{cpy,set} non-experimental ARM: 7520/1: Build dtb files in all target ARM: Fix build warning in arch/arm/mm/alignment.c ...
2012-10-02Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
2012-09-22Merge branch 'cleanup/__iomem' into next/cleanupOlof Johansson
__iomem annotation cleanup branch from Arnd. * cleanup/__iomem: (21 commits) net: seeq: use __iomem pointers for MMIO video: da8xx-fb: use __iomem pointers for MMIO scsi: eesox: use __iomem pointers for MMIO serial: ks8695: use __iomem pointers for MMIO input: rpcmouse: use __iomem pointers for MMIO ARM: samsung: use __iomem pointers for MMIO ARM: spear13xx: use __iomem pointers for MMIO ARM: sa1100: use __iomem pointers for MMIO ARM: prima2: use __iomem pointers for MMIO ARM: nomadik: use __iomem pointers for MMIO ARM: msm: use __iomem pointers for MMIO ARM: lpc32xx: use __iomem pointers for MMIO ARM: ks8695: use __iomem pointers for MMIO ARM: ixp4xx: use __iomem pointers for MMIO ARM: iop32x: use __iomem pointers for MMIO ARM: iop13xx: use __iomem pointers for MMIO ARM: integrator: use __iomem pointers for MMIO ARM: imx: use __iomem pointers for MMIO ARM: ebsa110: use __iomem pointers for MMIO ARM: at91: use __iomem pointers for MMIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-19ARM: integrator: use __iomem pointers for MMIOArnd Bergmann
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. This patch has a few small conflicts with stuff in linux-next, which we have to sort out in arm-soc. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-17ARM: 7519/1: integrator: convert platform devices to Device TreeLinus Walleij
This moves the physmap flash and SMSC91x ethernet devices over to the device tree, moving the static board code down into the #ifndef CONFIG_OF section. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-17ARM: 7518/1: integrator: convert AMBA devices to device treeLinus Walleij
This converts the AMBA (PrimeCell) devices on the Integrator/AP and Integrator/CP over to probing from the Device Tree if the kernel is compiled for Device Tree support. We continue to #ifdef out all non-DT code and vice versa on respective boot type to get a clean cut. We need to add a bunch of auxdata (compare to the Versatile) to handle bus names and callbacks alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-17ARM: 7517/1: integrator: initial device tree supportLinus Walleij
This is initial device tree support for the ARM Integrator family, we create a very basic device tree, #ifdef out the non-DT machines when compiling for device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-17Merge tag 'tegra-for-3.7-drivers-i2c' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/drivers From Stephen Warren: ARM: tegra: i2c driver enhancements mostly related to clocking This branch contains a number of fixes and cleanups to the Tegra I2C driver related to clocks. These are based on the common clock conversion in order to avoid duplicating the clock driver changes before and after the conversion. Finally, a bug-fix related to I2C_M_NOSTART is included. This branch is based on previous pull request tegra-for-3.7-common-clk. * tag 'tegra-for-3.7-drivers-i2c' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: Tegra: Add smp_twd clock for Tegra20 ARM: tegra: cpu-tegra: explicitly manage re-parenting ARM: tegra: fix overflow in tegra20_pll_clk_round_rate() ARM: tegra: Fix data type for io address ARM: tegra: remove tegra_timer from tegra_list_clks ARM: tegra30: clocks: fix the wrong tegra_audio_sync_clk_ops name ARM: tegra: clocks: separate tegra_clk_32k_ops from Tegra20 and Tegra30 ARM: tegra: Remove duplicate code ARM: tegra: Port tegra to generic clock framework ARM: tegra: Add clk_tegra structure and helper functions ARM: tegra: Rename tegra20 clock file ARM: tegra20: Separate out clk ops and clk data ARM: tegra30: Separate out clk ops and clk data ARM: tegra: fix U16 divider range check ... + sync to v3.6-rc4 Resolved remove/modify conflict in arch/arm/mach-sa1100/leds-hackkit.c caused by the sync with v3.6-rc4. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-16ARM: 7515/1: integrator: check PL010 base address from resourceLinus Walleij
In the PL010 UART callback a comparison against the location of the statically allocated PL010 device is done to figure out which UART is doing the callback. This does not play well with dynamic devices such as in device tree, so let's check the base address of the memory resource inside the amba_device instead. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-16ARM: 7514/1: integrator: call common init function from machineLinus Walleij
There is currently a common integrator_init() function set up to be called from an arch_initcall(). The problem is that it is using machine_is_integrator() which is not working with device tree, let's call this from respective machine initilization function and add a parameter to tell whether it's the Integrator/AP or Integrator/CP instead. There are still machine_is*() calls in the Integrator machines directory, but this one needs to be fixed lest we don't even get a UART console on the Integrator/AP after a Device Tree boot. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-04Merge commit 'a849088aa1' from rmk/fixes into cleanup/io-pciArnd Bergmann
As Stephen Rothwell reports, a849088aa155 ("ARM: Fix ioremap() of address zero") from the arm-current tree and commit c2794437091a ("ARM: Add fixed PCI i/o mapping") from the arm-soc tree conflict in a nontrivial way in arch/arm/mm/mmu.c. Rob Herring explains: The PCI i/o reserved area has a dummy physical address of 0 and needs to be skipped by ioremap searches. So we don't set VM_ARM_STATIC_MAPPING to prevent matches by ioremap. The vm_struct settings don't really matter when we do the real mapping of the i/o space. Since commit a849088aa155 is at the start of the fixes branch in the arm tree, we can merge it into the branch that contains the other ioremap changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-13Merge branch 'for-arm-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds into next/drivers From Bryan Wu <bryan.wu@canonical.com>: Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a new generic led trigger for CPU not only for ARM but also for others. For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to trigger idle start or idle end event. These patches convert old style LED driver in arch/arm to gpio_led or new led driver interface. Against 3.5 release and build successfully for all the machines. Test ledtrig-cpu driver on OMAP4 Panda board. v9 --> v10 * fix compiling issue on versatile_defconfig reported by Russell King * rebase to 3.5 kernel and move patches to new git tree v8 --> v9: * use mutex to replace rw_sema pointed out by Tim Gardner * add a new struct led_trigger_cpu * add lock_is_inited to record mutex lock initialization v6 --> v7: * add a patch to unify the led-trigger name * fix some typo pointed * use BUG_ON to detect CPU numbers during building stage v5 --> v6: * replace __get_cpu_var() to per_cpu() * remove smp_processor_id() which is wrong with for_each_possible_cpu() * test on real OMAP4 Panda board * add comments about CPU hotplug in the CPU LED trigger driver v4 --> v5: * rebase all the patches on top of latest linux-next * replace on_each_cpu() with for_each_possible_cpu() * add some description of ledtrig_cpu() API * remove old leds code from driver nwflash.c, which should use a new led trigger then * this trigger driver can be built as module now v3 --> v4: * fix a typo pointed by Jochen Friedrich * fix some building errors * add Reviewed-by and Tested-by into patch log v2 --> v3: * almost rewrote the whole ledtrig-cpu driver, which is more simple * every CPU will have a per-CPU trigger * cpu trigger can be assigned to any leds * fix a lockdep issue in led-trigger common code * other fix according to review v1 --> v2: * remove select operations in Kconfig of every machines * add back supporting of led in core module of mach-integrator * solidate name scheme in ledtrig-cpu.c * add comments of CPU_LED_* cpu led events * fold patches of RealView and Versatile together * add machine_is_ check during assabet led driver init * add some Acked-by in patch logs * remove code for simpad machine in machine-sa11000, since Jochen Friedrich introduced gpiolib and gpio-led driver for simpad * on Assabet and Netwinder machine, LED operations is reversed like: setting bit means turn off leds clearing bit means turn on leds * add a new function to read CM_CTRL register for led driver * 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: ARM: use new LEDS CPU trigger stub to replace old one ARM: mach-sa1100: retire custom LED code ARM: mach-omap1: retire custom LED code ARM: mach-pnx4008: remove including old leds event API header file ARM: plat-samsung: remove including old leds event API header file ARM: mach-pxa: retire custom LED code char: nwflash: remove old led event code ARM: mach-footbridge: retire custom LED code ARM: mach-ebsa110: retire custom LED code ARM: mach-clps711x: retire custom LED code of P720T machine ARM: mach-integrator: retire custom LED code ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger ARM: mach-shark: retire custom LED code ARM: mach-ks8695: remove leds driver, since nobody use it ARM: mach-realview and mach-versatile: retire custom LED code ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers led-triggers: create a trigger for CPU activity Conflicts: arch/arm/mach-clps711x/p720t.c arch/arm/mach-sa1100/leds-cerf.c arch/arm/mach-sa1100/leds-lart.c Let's hope this is the last time we pull this and it doesn't cause more trouble. I have verified that version 10 causes no build warnings or errors any more, and the patches still look good. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-09ARM: integrator: include <linux/export.h>Arnd Bergmann
Without this patch, building integrator_defconfig results in: arch/arm/mach-integrator/core.c:150:1: warning: data definition has no type or storage class [enabled by default] arch/arm/mach-integrator/core.c:150:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/arm/mach-integrator/core.c:150:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-06ARM: integrator: use clk_prepare_enable() for timerLinus Walleij
The Integrator timer is using the clock framework to get the timer frequency, but missed to prepare the clock before enabling. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-01ARM: mach-integrator: retire custom LED codeBryan Wu
Use the LED in core module for CPU activity and also enable 4 debugging LEDs in baseboard. The CPU activity LED is now handled by the trigger in the leds subsystem, retire this old CONFIG_LEDS-based code. Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-08-01ARM: mach-integrator: move CM_CTRL to header file for accessing by other ↵Bryan Wu
functions Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-26ARM: integrator: remove trailing whitespace on pci_v3.cRob Herring
No functional changes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2012-07-26ARM: integrator: use fixed PCI i/o mappingRob Herring
Move integrator PCI to fixed i/o mapping and remove io.h. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2012-07-12ARM: integrator: convert to common clockLinus Walleij
This converts the Integrator platform to use common clock and the ICST driver. Since from this point not all ARM reference platforms use the clock, we define CONFIG_PLAT_VERSATILE_CLOCK and select it for all platforms except the Integrator. Open issue: I could not use the .init_early() field of the machine descriptor to initialize the clocks, but had to move them to .init_irq(), so presumably .init_early() is so early that common clock is not up, and .init_machine() is too late since it's needed for the clockevent/clocksource initialization. Any suggestions on how to solve this is very welcome. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [mturquette@linaro.org: use 'select' instead of versatile Kconfig] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-07-12ARM: integrator: put symbolic bus names on devicesLinus Walleij
All the Integrator devices have bus names like "mb:16" which I think means "memory base 0x16000000" which is where the UART0 is. So let's call it "uart0" because that's what most platforms do these days. Change this everywhere for the integrator as we prepare for some core clock code movement. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-05-21Merge branches 'amba', 'devel-stable', 'fixes', 'mach-types', 'mmci', 'pci' ↵Russell King
and 'versatile' into for-linus
2012-05-13ARM: PCI: provide a default bus scan implementationRussell King
Most PCI implementations perform simple root bus scanning. Rather than having each group of platforms provide a duplicated bus scan function, provide the PCI configuration ops structure via the hw_pci structure, and call the root bus scanning function from core ARM PCI code. Acked-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-13ARM: PCI: integrator: use common PCI swizzleRussell King
The Integrator swizzle function is almost the same as the standard PCI swizzle, except for an initial check for pin = 0. Make the integrator swizzle function a wrapper around the standard PCI swizzle function so we preseve this behaviour while using common code. [fix to use pci_std_swizzle from Linus Walleij] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-04ARM: 7389/2: plat-versatile: modernize FPGA IRQ controllerLinus Walleij
This does two things to the FPGA IRQ controller in the versatile family: - Convert to MULTI_IRQ_HANDLER so we can drop the entry macro from the Integrator. The C IRQ handler was inspired from arch/arm/common/vic.c, recent bug discovered in this handler was accounted for. - Convert to using IRQ domains so we can get rid of the NO_IRQ mess and proceed with device tree and such stuff. As part of the exercise, bump all the low IRQ numbers on the Integrator PIC to start from 1 rather than 0, since IRQ 0 is now NO_IRQ. The Linux IRQ numbers are thus entirely decoupled from the hardware IRQ numbers in this controller. I was unable to split this patch. The main reason is the half-done conversion to device tree in Versatile. Tested on Integrator/AP and Integrator/CP. Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>