summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mxs
AgeCommit message (Collapse)Author
2012-12-18Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...
2012-11-20ARM: mxs: Add SchulerControl SPS1 DTS fileMarek Vasut
Add DTS file for this custom board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15powerpc+of: Rename the drivers/of prom_* functions to of_*Nathan Fontenot
Rename the prom_*_property routines of the generic OF code to of_*_property. This brings them in line with the naming used by the rest of the OF code. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by: Geoff Levand <geoff@infradead.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-12ARM: mxs: Setup scheduler clockStanislav Meduna
Setup scheduler clock on ARM MXS platforms with a 32-bit timrot such as i.MX28. This allows the scheduler to use sub-jiffy resolution. The corresponding change for 16-bit v1 timrots is not possible at the moment due to rounding issues with clock values wrapping faster than once per several seconds in the common ARM platform code. Signed-off-by: Stanislav Meduna <stano@meduna.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-05ARM: mxs: apf28dev: Add LCD and backlight supportGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-30ARM: mx28: Skip OCOTP FEC MAC setup if in DTMarek Vasut
Currently, the kernel unconditionally adds "local-mac-address" and "mac-address" properties under both FEC ethernet DT nodes in case the update_fec_mac_prop() function is called. These properties are loaded with MAC address compiled from vendors OUI and a per-device NIC saved in OCOTP storage. Some more advanced bootloaders do augment the DT passed to the kernel by these properties already. In such case, it is wrong for kernel to override these values. Adjust the FEC MAC address loading so that in case the DT properties are already present in the DT passed from the bootloader, skip the loading from OCOTP altogether. If the DT properties are not present, load them from OCOTP. Note that the later case will lead to zeroed out MAC address if OCOTP is not programmed. This will lead to FEC not working at all. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-19ARM: mxs: Add support for the Armadeus Systems APF28 moduleJulien Boibessot
The APF28 is a small SOM built around an i.MX28 processor with 128MBytes DDR2, 256MBytes NAND Flash and an Ethernet PHY. Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-15ARM: dts: cfa10049: Add FEC to the CFA-10049 expansion boardMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-02Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-02Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc-specific updates, take 2 from Olof Johansson: "This branch converts the MXS Freescale platform to use irqdomains and sparse IRQ, in preparation for DT probing and multiplatform kernels." * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: remove mach/irqs.h ARM: mxs: select SPARSE_IRQ ARM: mxs: adopt irq_domain support for icoll driver ARM: mxs: select MULTI_IRQ_HANDLER ARM: mxs: retrieve timer irq from device tree gpio/mxs: adopt irq_domain support for mxs gpio driver
2012-10-02Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc device tree updates from Olof Johansson: "Device tree conversion and enablement branch. Mostly a bunch of new bindings and setup for various platforms, but the Via/Winchip VT8500 platform is also converted over from being 100% legacy to now use device tree for probing. More of that will come for 3.8." Trivial conflicts due to removal of vt8500 files, and one documentation file that was added with slightly different contents both here and in the USb tree. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits) arm: vt8500: Fixup for missing gpio.h ARM: LPC32xx: LED fix in PHY3250 DTS file ARM: dt: mmp-dma: add binding file arm: vt8500: Update arch-vt8500 to devicetree support. arm: vt8500: gpio: Devicetree support for arch-vt8500 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices arm: vt8500: clk: Add Common Clock Framework support video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb serial: vt8500: Add devicetree support for vt8500-serial rtc: vt8500: Add devicetree support for vt8500-rtc arm: vt8500: Add device tree files for VIA/Wondermedia SoC's ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ...
2012-09-24phy/micrel: Rename KS80xx to KSZ80xxMarek Vasut
There is no such part as KS8001, KS8041 or KS8051. There are only KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match the Micrel naming. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson
into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-19ARM: mxs: m28evk: Disable OCOTP OUI loadingMarek Vasut
Don't load the FEC MAC address from OCOTP, but use the one supplied via device tree by U-Boot. This is the preferred way, every DT-capable bootloader does set up "mac-address" and "local-mac-address" properties into the DT passed to the kernel. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-14ARM: move all dtb targets out of Makefile.bootRob Herring
In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-14ARM: make mach/gpio.h headers optionalRob Herring
Most platforms don't need mach/gpio.h and it prevents multi-platform kernel images. Add CONFIG_NEED_MACH_GPIO_H and make platforns select it if they need gpio.h. This is platforms that define __GPIOLIB_COMPLEX or have lots of implicit includes pulled in by mach/gpio.h. at91 and omap have gpio clean-up pending and can drop CONFIG_NEED_MACH_GPIO_H once that is in. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-03ARM: dts: mxs: Add the second I2C adapter to the CFA10049 expansion boardMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-03ARM: mxs: remove mach/irqs.hShawn Guo
With SPARSE_IRQ adopted for mach-mxs, header mach/irqs.h is needed nowhere now, so remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-03ARM: mxs: adopt irq_domain support for icoll driverShawn Guo
Remove irq_domain_add_legacy call from mach-mxs.c and have icoll adopt irq_domain support in the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-03ARM: mxs: select MULTI_IRQ_HANDLERShawn Guo
As part of multi-platform effort, let's enable MULTI_IRQ_HANDLER for mach-mxs and remove entry-macro.S. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-03ARM: mxs: retrieve timer irq from device treeShawn Guo
Rather than using the static timer irq definition, we should retrieve timer irq from device tree for better. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-03gpio/mxs: adopt irq_domain support for mxs gpio driverShawn Guo
Remove irq_domain_add_legacy call from mach-mxs.c and have the gpio driver adopt irqdomain support, so that we can have the mapping between gpio and irq number available without using virtual_irq_start and MXS_GPIO_IRQ_START. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-27ARM: mxs: Update DENX M28 machine and dts fileMarek Vasut
Update the mach-mxs machine by removing the enet_clkout(). The new revision of the board doesn't need that. Also, update the DTS file with all the new drivers pulled in the mainline recently, that is, SPI, LRADC, USB. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-17ARM: mxs: remove iomux driverShawn Guo
With all board files removed, there is no user of iomux driver. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-17ARM: mxs: remove platform device codesShawn Guo
With all the board files removed, there is no user for those platform device code. Remove them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-17ARM: mxs: remove non-DT core functionsShawn Guo
With all board files removed, those core functions used for non-DT boot only can be removed now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-17ARM: mxs: remove board filesShawn Guo
Since DT kernel provides the equivalent support with those board files, we can remove them now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: Marek Vasut <marex@denx.de> Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com>
2012-08-17ARM: mxs: use auxdata to pass flexcan_switch function hookShawn Guo
There are some efforts going on to have flexcan_switch function implemented in flexcan driver, so that this platform function hook can be saved for device tree boot. But due to the mx28evk board design oddness that two flexcan transceivers share one switch gpio, we have to come up a separate and generic gpio-switch driver to handle all these gpio switch use cases. Before that happens, we choose to use auxdata to pass flexcan_switch function hook, so that the DT conversion is not blocked there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-17ARM: mxs: tx28: reset fec phy for device tree bootShawn Guo
For non-DT boot, function tx28_add_fec0 configures all ENET0 pins into gpio mode for resetting fec phy, and then reconfigures those pins into ENET function after that. For DT boot, all the pin configuration is done by pinctrl subsystem. Ideally, when gpio_request gets called, GPIO subsystem should call pinctrl to configure pins into gpio mode automatically, and have pins freed up from pinctrl subsystem when gpio_free is called. But right now, this cooperation between gpio and pinctrl hasn't been available. As the result, we have to explicitly call pinctrl_get_select and pinctrl_put for device tree boot. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
2012-08-17ARM: mach-mxs: Remove board entries in dt_board_compatFabio Estevam
There is no need for adding board related entries into dt_board_compat. Leave only the SoC entry. This way we do not need to patch a C file when adding dt support for a new board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-17ARM: mx28evk: add missed clkmux select for saifDong Aisheng
Added missed clkmux setting for mx28evk. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-04ARM: mxs: always build ocotpMarc Kleine-Budde
With this patch ocotp support will always be build into the kernel on mxs. Otherwise a DT-only kernel fails to link with: arch/arm/mach-mxs/mach-mxs.c:169: undefined reference to `mxs_get_ocotp' Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-26ARM: mxs: fix compile error caused by prom_update_property changeShawn Guo
The commit 475d009 (of: Improve prom_update_property() function) changed prom_update_property interface, and causes the compile error below. CC arch/arm/mach-mxs/mach-mxs.o arch/arm/mach-mxs/mach-mxs.c: In function ‘update_fec_mac_prop’: arch/arm/mach-mxs/mach-mxs.c:216:4: error: too many arguments to function ‘prom_update_property’ include/linux/of.h:263:12: note: declared here Update the caller update_fec_mac_prop to fix the error. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-07-23Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc device tree description updates from Arnd Bergmann: "This branch contains two kinds of updates: Some platforms in the process of getting converted to device tree based booting, and the platform specific patches necessary for that are included here. Other platforms are already converted, so we just need to update the actual device tree source files and the binding documents to add support for new board and new drivers. In the future we will probably separate those into two branches, and in the long run, the plan is to move the device tree source files out of the kernel repository, but that has to wait until we have completed a much larger portion of the binding documents." Fix up trivial conflicts in arch/arm/mach-imx/clk-imx6q.c due to newly added clkdev registers next to a few removed unnecessary ones. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: LPC32xx: Add PWM to base dts file ARM: EXYNOS: mark the DMA channel binding for SPI as preliminary ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5 ARM: EXYNOS: Add spi clock support for EXYNOS5 ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4 ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock ARM: ux500: Remove PMU platform registration when booting with DT ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure ARM: ux500: Ensure vendor specific properties have the vendor's identifier pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree ARM: ux500: Apply ab8500-debug node do the db8500 DT structure ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT ...
2012-07-23Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical arm-soc bug fixes from Arnd Bergmann: "These were submitted as bug fixes before v3.5 but not considered important enough to be included in it." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM:vt8500: Convert to use .restart and remove arch_reset() ARM: davinci: da8xx: fix interrupt handling ARM: OMAP2+: fix CONFIG_CPU_IDLE dependency on CONFIG_PM ARM: mxs/tx28: fix odd include ARM: OMAP: remove unused cpu detection macros ARM: OMAP: fix typos related to OMAP330 ARM: OMAP7XX: Remove omap730.h and omap850.h ARM: OMAP2+: fix naming collision of variable nr_irqs ARM: OMAP: omap2plus_defconfig: Enable EXT4 support ARM: OMAP depends on MMU arm: omap3: am35x: Set proper powerdomain states ARM: OMAP AM35x: clockdomain data: Fix clockdomain dependencies ARM: OMAP AM35x: EMAC/MDIO integration: Add Davinci EMAC/MDIO hwmod support ARM: OMAP: AM35xx: fix UART4 softreset ARM: OMAP AM35xx: clock and hwmod data: fix UART4 data ARM: OMAP AM35xx: clock and hwmod data: fix AM35xx HSOTGUSB hwmod ARM: OMAP: Fix dts files w/ status property: "disable" -> "disabled" ARM: OMAP: beagle: Set USB Host Port 1 to OMAP_USBHS_PORT_MODE_UNUSED ARM: OMAP2: twl-common: Fix compiler warning ARM: OMAP: fix the ads7846 init code ...
2012-07-12Merge branch 'mxs/dt-for-3.6' of ↵Arnd Bergmann
git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt From Shawn Guo <shawn.guo@linaro.org>: Here is the second (last) batch of mxs mxs device tree changes for 3.6. * 'mxs/dt-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx28-evk: add usb devices ARM: mxs: rename dts files with soc name being the prefix ARM: apx4devkit: add pin muxing for GPIOs ARM: apx4devkit: remove AUART3 ARM: apx4devkit: add SSP2 support ARM: apx4devkit: fix the bus-width of SSP0 to 4 bits ARM: apx4devkit: add display support ARM: apx4devkit: add NAND support ARM: mxs: add dtb-y target into Makefile.boot ARM: mxs: convert stmp378x_devb board to device tree ARM: mxs: convert tx28 board to device tree ARM: mxs: convert apx4devkit board to device tree ARM: mxs: convert m28evk board to device tree ARM: dts: imx28: move lcdif control pins into board dts ARM: dts: imx28: move extra gpmi-nand pins into board dts Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-12Merge tag 'v3.5-rc6' into next/dtArnd Bergmann
New pull requests are based on Linux 3.5-rc6
2012-07-11ARM: mxs: rename dts files with soc name being the prefixShawn Guo
Rename mxs dts files with soc name being the prefix, so that the board dts file can be located easily by soc name, and we also gain the consistency of naming. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11ARM: apx4devkit: add display supportLauri Hintsala
Add HannStar display and device tree configuration. Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11ARM: mxs: add dtb-y target into Makefile.bootShawn Guo
Add dtb-y target into Makefile.boot, so that "make ARCH=arm dtbs" can build out all the dtbs listed there. It's very useful for build-testing all the <board>.dts when imx28.dtsi changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11ARM: mxs: convert stmp378x_devb board to device treeShawn Guo
The enc28j60 spi device does not get converted to dts file, because there is no mxs spi driver on mainline so far. The enc28j60 spi in mach-stmp378x_devb.c does not work anyway. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11ARM: mxs: convert tx28 board to device treeShawn Guo
FEC support is missing because we need to find a proper way to rewrite tx28_add_fec0 for device tree boot. Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11ARM: mxs: convert apx4devkit board to device treeShawn Guo
Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-11ARM: mxs: convert m28evk board to device treeMarek Vasut
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-05ARM: apx4devkit: fix FEC enabling PHY clockLauri Hintsala
Ethernet stopped to work after mxs clk framework change. Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-05ARM: mx23: Add initial support for olinuxino boardFabio Estevam
mx23-olinuxino is a low cost board designed by Olimex. It has the following features: - Freescale iMX233 ARM926J processor at 454MHz -64 MB RAM -SD-card connector -TV PAL/NTSC video output -2 USB High Speed Hosts -Ethernet 100 Mbit -Stereo Audio Input -Stereo Headphones Audio Output More information at: http://www.olimex.com/dev/imx233-olinuxino-maxi.html Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: mxs: use auxdata to attach mxsfb_platform_dataShawn Guo
Use auxdata to attach mxsfb_platform_data for imx23-evk and imx28-evk. We take this as a temporary solution for removing those board files, and it should be updated to use common bindings for struct fb_videomode when it becomes available. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03video: mxsfb: move mxsfb.h into include/linuxShawn Guo
Move mxsfb.h into include/linux, so that mxsfb driver does not have to include <mach/*> header. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: mxs: enable flexcan on imx28Marc Kleine-Budde
As the flexcan driver has DT binding for some time now. This patch makes the flexcan driver available in the can drivers menu if a SOC with flexcan is enabled. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03ARM: mxs: Add Crystalfontz CFA-10036 DTSMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Brian Lily <brian@crystalfontz.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>