summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/gpmc-onenand.c
AgeCommit message (Collapse)Author
2012-10-15ARM: OMAP2+: gpmc: localize gpmc headerAfzal Mohammed
Requirement of gpmc header outside of mach-omap2 has been cutoff, move gpmc header file in plat-omap folder to local mach-omap2 folder Objective - common zImage participation of omap Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-10-15ARM: OMAP2+: onenand: header cleanupAfzal Mohammed
For common arm zImage existing onenand header file in platform specific location was moved to generic platform data location, but it contained more than platform data, remove it. New local header has been created for exposing functions. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-10-15ARM: OMAP2+: onenand: connected soc info in pdataAfzal Mohammed
onenand driver needs to know whether soc is falling under 34xx family to properly handle onenand. But driver is not supposed to do cpu_is_* check, hence educate platform data with this information. Driver can make use of it to avoid cpu_is_* check. Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-10-15ARM: OMAP2+: gpmc: remove cs# in sync clk div calcAfzal Mohammed
Divider value for a certain sync clk is determined solely based on gpmc fclk. CS# does not have any role here, thus remove presence of CS# in clock divider calculation API. Signed-off-by: Afzal Mohammed <afzal@ti.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com>
2012-10-15ARM: OMAP2+: GPMC: Remove unused OneNAND get_freq() platform functionJon Hunter
A platform function pointer for getting the frequency of a OneNAND device was added so that a platform could specify a custom function for returning the frequency and not just rely on the OneNAND version to determine the frequency. However, this platform function pointer is not currently being used and I am not sure if it ever has. OneNAND devices are not so common these days and as far as I know not being used with new devices. Therefore, it is most likely that this get_freq() function pointer will not be used and so remove it. Given that the get_freq() function pointer is not used, neither is the clk_dep variable and so all references to it can also be removed. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com>
2012-10-15ARM: OMAP2+: onenand: refactor for clarityAfzal Mohammed
Refactor set_async_mode & set_sync_mode functions to separate out timing calculation & actual configuration (GPMC & OneNAND side). Thanks to Jon for his suggestions. Signed-off-by: Afzal Mohammed <afzal@ti.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com>
2012-09-19ARM: omap: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
2012-09-13ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-13Merge tags 'omap-devel-gpmc-fixed-for-v3.7' and 'cleanup-omap-tags-for-v3.7' ↵Tony Lindgren
into cleanup-sparseirq Changes for GPMC (General Purpose Memory Controller) that take it closer for being just a regular device driver. Remove the ancient omap specific atags that are no longer needed. At some point we were planning to pass the bootloader information with custom atags that did not work out too well. There's no need for these any longer as the kernel has been booting fine without them for quite some time. And Now we have device tree support that can be used instead.
2012-09-10ARM: OMAP: remove plat/board.h fileIgor Grinberg
plat/board.h file is now empty - remove it. Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30ARM: OMAP2+: gpmc-onenand: provide memory as resourceAfzal Mohammed
Currently omap onenand driver invokes gpmc_cs_request, obtains address space allocated by gpmc to onenand. Remove this, instead use resource structure; this is now updated with address space for onenand by gpmc initialization with the help of gpmc_cs_request. And remove usage of gpmc_cs_request in onenand driver. This helps in smooth migration of gpmc to driver. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-04-17ARM: OMAP2+: clean up some cppcheck warningsPaul Walmsley
Resolve some warnings identified by cppcheck in arch/arm/mach-omap2: [arch/arm/mach-omap2/usb-tusb6010.c:129]: (style) Checking if unsigned variable 'tmp' is less than zero. [arch/arm/mach-omap2/prm_common.c:241]: (error) Possible null pointer dereference: irq_setup - otherwise it is redundant to check if irq_setup is null at line 247 [arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'per_clkdm' is assigned a value that is never used [arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'core_clkdm' is assigned a value that is never used [arch/arm/mach-omap2/pm24xx.c:185]: (style) Variable 'only_idle' is assigned a value that is never used [arch/arm/mach-omap2/mux.c:254]: (error) Possible null pointer dereference: mux [arch/arm/mach-omap2/mux.c:258]: (error) Possible null pointer dereference: mux [arch/arm/mach-omap2/gpmc-onenand.c:178]: (style) Variable 'tick_ns' is assigned a value that is never used [arch/arm/mach-omap2/gpio.c:56]: (error) Possible null pointer dereference: pdata - otherwise it is redundant to check if pdata is null at line 57 [arch/arm/mach-omap2/devices.c:45]: (style) Variable 'l' is assigned a value that is never used [arch/arm/mach-omap2/board-omap3evm.c:641] -> [arch/arm/mach-omap2/board-omap3evm.c:639]: (style) Found duplicate branches for if and else. [arch/arm/mach-omap2/am35xx-emac.c:95]: (style) Variable 'regval' is assigned a value that is never used [arch/arm/mach-omap2/devices.c:74]: (style) Variable 'l' is assigned a value that is never used [arch/arm/mach-omap2/pm34xx.c:277]: (style) Variable 'per_prev_state' is assigned a value that is never used [arch/arm/plat-omap/dmtimer.c:352]: (error) Possible null pointer dereference: timer - otherwise it is redundant to check if timer is null at line 354 [arch/arm/plat-omap/omap_device.c:478]: (style) Variable 'c' is assigned a value that is never used [arch/arm/plat-omap/usb.c:42]: (style) Variable 'status' is assigned a value that is never used [arch/arm/mach-omap1/clock.c:197]: (style) Variable 'dpll1_rate' is assigned a value that is never used [arch/arm/mach-omap1/lcd_dma.c:60]: (style) struct or union member 'lcd_dma_info::size' is never used [arch/arm/mach-omap1/pm.c:572]: (style) Variable 'entry' is assigned a value that is never used Some of them are pretty good catches, such as gpio.c:56 and usb-tusb6010.c:129. Thanks to Jarkko Nikula for some comments on the sscanf() warnings. It seems that the kernel sscanf() ignores the field width anyway for the %d format, so those changes have been dropped from this second version. Thanks to Daniel Marjamäki <daniel.marjamaki@gmail.com> for pointing out that a variable was unnecessarily marked static in the board-omap3evm.c change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Charulatha Varadarajan <charu@ti.com> Cc: Daniel Marjamäki <daniel.marjamaki@gmail.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Charulatha Varadarajan <charu@ti.com> # for gpio.c
2012-02-24ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.hTony Lindgren
This is needed to minimize io.h so the SoC specific io.h for ARMs can removed. Note that minimal driver changes for DSS and RNG are needed to include cpu.h for SoC detection macros. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-31arm: fix implicit memset/string.h usage in various arch/arm filesPaul Gortmaker
To fix things like this: arch/arm/mach-omap2/usb-tusb6010.c:58: error: implicit declaration of function 'memset' arch/arm/kernel/leds.c:40: error: implicit declaration of function 'strcspn' arch/arm/kernel/leds.c:40: warning: incompatible implicit declaration of built-in function 'strcspn' arch/arm/kernel/leds.c:45: error: implicit declaration of function 'strncmp' arch/arm/kernel/leds.c:55: error: implicit declaration of function 'strlen' arch/arm/kernel/leds.c:55: warning: incompatible implicit declaration of built-in function 'strlen' arch/arm/mach-omap2/clockdomain.c:52: error: implicit declaration of function 'strcmp' Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-17OMAP: OneNAND: let boards determine OneNAND frequencyAdrian Hunter
OneNAND version ID may not give the highest frequency supported and some OneNAND's have setup times that are clock dependent. Let the board provide that information. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17OMAP: OneNAND: determine frequency in one placeAdrian Hunter
OneNAND frequency is determined when calculating GPMC timings. Return that value instead of determining it again in the OMAP OneNAND driver. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17OMAP: OneNAND: fix 104MHz supportAdrian Hunter
104MHz needs a latency of 8 clock cycles and the VHF flag must be set. Also t_rdyo is specified as "not applicable" so pick a lower value, and force at least 1 clk between AVD High to OE Low. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP2/3: OneNAND: add 104MHz supportAdrian Hunter
Add GPMC timings for 104MHz OneNAND. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanosecondsAdrian Hunter
The calculations done with sync_clk are anyway in picoseconds and switching to picoseconds allows sync_clk values that are not a whole number of nanoseconds - which is sometimes the case. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20omap: headers: Move remaining headers from include/mach to include/platTony Lindgren
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-06-23OMAP2/3: gpmc-onenand: correct use of async timingsAdrian Hunter
Use async timings when sync timings are not requested. Also ensure that OneNAND is in async mode when async timings are used. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28ARM: OMAP2/3: Add generic onenand support when connected to GPMCJuha Yrjola
Add generic onenand support when connected to GPMC and make the boards to use it. The patch has been modified to make it more generic to support all the boards with GPMC. The patch also remove unused prototype for omap2_onenand_rephase(void). Note that board-apollon.c is currently using the MTD_ONENAND_GENERIC and setting the GPMC timings in the bootloader. Setting the GPMC timings in the bootloader will not allow supporting frequency scaling for the onenand source clock. Signed-off-by: Tony Lindgren <tony@atomide.com>