summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/iommu2.c
AgeCommit message (Collapse)Author
2011-08-26omap: iommu: omapify 'struct iommu' and exposed APIOhad Ben-Cohen
Prepend 'omap_' to OMAP's 'struct iommu' and exposed API, to prevent namespace pollution and generally to improve readability of the code that still uses the driver directly. Update the users as needed as well. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-07-04omap: iommu: fix pte programmingSuman Anna
Fix the pte programming to set the page attributes correctly by replacing the bitwise check with an explicit values check. Otherwise, 16MB entries will be erroneously programmed like 4KB entries, which is not what the hardware expects. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-02-24omap: IOMMU: add support to callback during fault handlingDavid Cohen
Add support to register an isr for IOMMU fault situations and adapt it to allow such (*isr)() to be used as fault callback. Drivers using IOMMU module might want to be informed when errors happen in order to debug it or react. Signed-off-by: David Cohen <dacohen@gmail.com> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-24OMAP2+: IOMMU: don't print fault warning on specific layerDavid Cohen
IOMMU upper layer and user are responsible to handle a fault and to define whether it will end up as an error or not. OMAP2+ specific layer should not print anything in such case. Signed-off-by: David Cohen <dacohen@gmail.com> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-06-29omap iommu: move iommu_disable at fault to the above layerHiroshi DOYU
The function prefix "omap2_iommu_" indicates that the prefixed function belongs to "omap2_iommu_ops" to provide iommu basic functionalities for the above layers. It's better to avoid the prefixed function called in the same prefixed ones internally, like nested here. Now "iommu_disable" is called just after fault_isr() in the above layer. This is a little bit more sensible to keep the consistency of module layers. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-06-29omap iommu: add functionality to get TLB miss interruptKanigeri, Hari
In order to enable TLB miss interrupt, the TWL should be disabled. This patch provides the functionality to get the MMU fault interrupt for a TLB miss in the cases where the users are working with the locked TLB entries and with TWL disabled. New interface is added to select twl and to enable TLB miss interrupt. Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Ramesh Gupta <grgupta@ti.com> Signed-off-by: Hiroshi Doyu <Hiroshi.DOYU@nokia.com>
2010-06-29omap iommu: update irq mask to be specific about twl and tlbKanigeri, Hari
Revise the IRQ mask definitions to handle the MMU faults related to TWL fault as well as TLB miss fault. Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Hiroshi Doyu <Hiroshi.DOYU@nokia.com>
2010-05-14omap iommu: add TLB preservation supportKanigeri, Hari
This patch adds TLB preservation support to IOMMU module Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-14omap iommu: missing check for TLB valid entryKanigeri, Hari
Added the missing TLB valid entry setting for cam register Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-10-20omap: headers: Move remaining headers from include/mach to include/platTony Lindgren
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-09-28omap: Fix wrong condition check in while loop for mailbox and iommu2Hiroshi DOYU
It's worked fine so far since reset is done for the first time. Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Juha Leppanen <juha_motorsportcom@luukku.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: iommu: add initial debugfs supportHiroshi DOYU
This enables to peek the following data. $ /debug/iommu/isp# ls mem nr_tlb_entries regs mmap pagetable tlb $ /debug/iommu/isp# head pagetable L: da: pa: ----------------------------------------- 2: 00001000 8ae4a002 2: 00002000 8e7bb002 2: 00003000 8ae49002 2: 00004000 8ae65002 ..... Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-05omap iommu: omap2 architecture specific functionsHiroshi DOYU
The structure 'arch_mmu' accommodates the difference between omap1 and omap2/3. This patch provides omap2/3 specific functions Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>