summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
AgeCommit message (Collapse)Author
2010-02-15omap: Rename mmc-twl4030 files to hsmmcAdrian Hunter
mmc-twl4030.[ch] no longer has any dependency on twl4030 and should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap_hsmmc: Move gpio and regulator control from board fileAdrian Hunter
This patch moves the setup code for GPIO's and Voltage Regulators from the board file mmc-twl4030.c to the driver omap_hsmmc.c. PBIAS and other system control configuration remains in the board file. Moving GPIO code to the driver makes the board initialisation code independent of when GPIO's are defined. That makes the board initialisation now entirely independent of its original twl4030 roots. Moving Voltage Regulator code to the driver allows for further development of regulator support in the core MMC code. It also permits the MMC core to be compiled as a module, because the board code no longer calls MMC core functions. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap3: Add support for flash on 3430SDP boardVimal Singh
This patch adds support for flashes on 3430SDP boards. All three NAND, NOR and OneNAND are supported. I have tested it on 3430SDP (ES2 and ES3.1). This patch can be treated as an example to "how to utilize": 'gpmc-nand.c' and 'board-sdp-flash.c'. Similar patches can be created for 2430sdp and 3630sdp or any other similar board. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap3: SDP: Introducing 'board-sdp-flash.c' for flash initVimal Singh
This patch adds 'board-sdp-flash.c', which could be utilized by boards similar to 3430SDP. (For ex: 2430sdp, 36030sdp). This file does initialization for all three flash devices present in SDP boards (NOR, NAND, OneNAND), by finding there 'cs' number dynamically using switch setting information (S8: 1-4). This also expects partition information from core board files (for ex: board-3430sdp.c). Which allows to choose different default partitions for different boards. A new structure is created for this purpose: 'flash_partitions' in 'mach/board-sdp.h'. This has two members: 1. struct mtd_partition *parts 2. int nr_parts A board file is expected to fill this structure and pass it to 'sdp-flsash-init'. Partition information should be passed in structure array of 'flash_partitions'. Partition information should be passed in below sequence in array: NOR OneNAND NAND Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Introducing 'gpmc-nand.c' for GPMC specific NAND initVimal Singh
Introducing 'gpmc-nand.c' for GPMC specific NAND init. For example: GPMC timing parameters and all. This patch also migrates gpmc related calls from 'nand/omap2.c' to 'gpmc-nand.c'. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: serial: fix coding style indentaionvikram pandita
No logical code change Fix coding style indentaion as per checkpatch.pl Fix multi-line comment style reported by Nishanth Menon Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Cc: Nishanth Menon <nm@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: gpmc: kill compile warningFelipe Balbi
Get rid of the following warnings: arch/arm/mach-omap2/gpmc.c:550:30: warning: non-ANSI function declaration of function 'omap3_gpmc_save_context' arch/arm/mach-omap2/gpmc.c:581:33: warning: non-ANSI function declaration of function 'omap3_gpmc_restore_context' Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: mailbox: kill compile warning in mailbox.cFelipe Balbi
Change %d to %ld to avoid the compile warning. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: McBSP: Introduce caching in register write operationsJanusz Krzysztofik
Determine cache size required per McBSP port at init time, based on processor type running on. Allocate space for storing cached copies of McBSP register values at port request. Modify omap_msbcp_write() function to update the cache with every register write operation. Modify omap_mcbsp_read() to support reading from cache or hardware. Update MCBSP_READ() macro for modified omap_mcbsp_read() function API. Introduce a new macro that reads from the cache. Tested on OMAP1510 based Amstrad Delta using linux-omap for-next, commit fb7380d70e041e4b3892f6b19dff7efb609d15a4 (2.6.33-rc3+ dated 2010-01-11). Compile-tested with: omap_perseus2_730_defconfig, omap_generic_1610_defconfig, omap_generic_2420_defconfig, omap_2430sdp_defconfig, omap_3430sdp_defconfig, omap_4430sdp_defconfig with CONFIG_OMAP_MCBSP=y selected. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: convert boards to use physmap-flashLadislav Michl
Convert OMAP based boards to use physmap-flash. Refreshed against today's Linux omap kernel tree Cc: linux-mtd@lists.infradead.org Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Fix mach-omap2/serial.c for multibootTony Lindgren
Initialize UART4 only for 3630 and 44xx. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap3/4: Fix compile for multi-omap for clkops_noncore_dpll_opsTony Lindgren
Rename clkops_noncore_dpll_ops for omap3 and omap4. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Allow booting omap4 with multi-omap configurationTony Lindgren
Allow booting omap4 with multi-omap configuration. Tested only on omap2 and omap3, please somebody test on omap4 and ack. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Clean up entry-macro.s for adding support for omap4 multibootTony Lindgren
Move defines around and set up handlers based on MULTI_OMAP2. Note that this will only allow compiling in omap4 with omap2 and omap3. It will not yet make omap4 boot with multi-omap. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap4: Use get_irqnr_preambleTony Lindgren
Use get_irqnr_preamble Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Clean up defines for entry-macro.STony Lindgren
Define the irq base the same way as for omap2 and omap3, and start using get_irqnr_preamble. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3: Fix initcalls for multi-omapTony Lindgren
Otherwise the wrong initcalls can run. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Replace orred CONFIG_ARCH_OMAP2/3/4 with CONFIG_ARCH_OMAP2PLUSTony Lindgren
omap: Replace orred CONFIG_ARCH_OMAP2/3/4 with CONFIG_ARCH_OMAP2PLUS Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3Tony Lindgren
Replace ARCH_OMAP34XX with ARCH_OMAP3 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2Tony Lindgren
Convert ARCH_OMAP24XX to ARCH_OMAP2 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Fix mbox init for multi-omapTony Lindgren
Fix mbox init for multi-omap Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Fix omap2_map_common_io for multi-omapTony Lindgren
Fix omap2_map_common_io for multi-omap Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3: Multiboot compile fixes to compile in omap2 and omap3Tony Lindgren
Allows compiling in omap2 and omap3. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3: Make get_irqnr_and_base common for mach-omap2 multibootTony Lindgren
Make get_irqnr_and_base common for mach-omap2 multiboot Thanks to a tip from Russell King <rmk+kernel@arm.linux.org.uk>, this also optimizes the code for non-multiboot configurations by using get_irqnr_preamble. Note that this will only work currently for 24xx and 34xx. Support for 44xx can be added later on for basic multiboot, and similar patch should be done for mach-omap1/entry-macro.S. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15Merge branch 'debug-ll' into omap-for-linusTony Lindgren
2010-02-15omap: Make uncompress code and DEBUG_LL code genericTony Lindgren
Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Clean the serial port definesTony Lindgren
This way we don't have conflicts with the defines with compiling in multiple omaps. Set the addresses for uarts in struct omap_globals for the early serial init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-12Merge branch 'for-tony' of git://gitorious.org/linux-omap-dss2/linux into ↵Tony Lindgren
omap-for-linus
2010-02-12ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren
Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12omap3: cm-t35: add DSS2 display supportMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12OMAP: AM3517: Enable DSS2 for AM3517EVM boardVaibhav Hiremath
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> [tomi.valkeinen@nokia.com: removed defconfig changes] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12OMAP: Enable DSS2 for OMAP3EVM boardVaibhav Hiremath
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> [tomi.valkeinen@nokia.com: removed evm defconfig changes] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-11Merge branch 'omap-fixes-for-linus' into omap-for-linusTony Lindgren
2010-02-10OMAP: hsmmc: fix memory leakAaro Koskinen
The platform data allocated with kmalloc() will become unreachable once the init is complete, so it should be freed. The problem was discovered by kmemleak. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03omap: Disable serial port autoidle by defaultTony Lindgren
Currently the omap serial clocks are autoidled after 5 seconds. However, this causes lost characters on the serial ports. As this is considered non-standard behaviour for Linux, disable the timeout. Note that this will also cause blocking of any deeper omap sleep states. To enable the autoidling of the serial ports, do something like this for each serial port: # echo 5 > /sys/devices/platform/serial8250.0/sleep_timeout # echo 5 > /sys/devices/platform/serial8250.1/sleep_timeout ... Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03omap: Fix arch/arm/mach-omap2/mux.c: Off by one errorTony Lindgren
David Binderman ran the sourceforge tool cppcheck over the source code of the new Linux kernel 2.6.33-rc6: [./arm/mach-omap2/mux.c:492]: (error) Buffer access out-of-bounds 13 characters + 1 digit + 1 zero byte is more than 14 characters. Also add a comment on mode0 name length in case new omaps start using longer names. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03omap: Fix 3630 mux errorsTony Lindgren
3630 has more mux signals than 34xx. The additional pins exist in omap36xx_cbp_subset, but are not initialized as the superset is missing these offsets. This causes the following errors during the boot: mux: Unknown entry offset 0x236 mux: Unknown entry offset 0x22e mux: Unknown entry offset 0x1ec mux: Unknown entry offset 0x1ee mux: Unknown entry offset 0x1f4 mux: Unknown entry offset 0x1f6 mux: Unknown entry offset 0x1f8 mux: Unknown entry offset 0x1fa mux: Unknown entry offset 0x1fc mux: Unknown entry offset 0x22a mux: Unknown entry offset 0x226 mux: Unknown entry offset 0x230 mux: Unknown entry offset 0x22c mux: Unknown entry offset 0x228 Fix this by adding the missing offsets to omap3 superset. Note that additionally the uninitialized pins need to be skipped on 34xx. Based on an earlier patch by Allen Pais <allen.pais@ti.com>. Reported-by: Allen Pais <allen.pais@ti.com> Signed-off-by: Allen Pais <allen.pais@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03OMAP2/3: GPMC: ensure valid clock pointerKevin Hilman
Ensure valid clock pointer during GPMC init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03OMAP2/3: IRQ: ensure valid base addressKevin Hilman
Ensure valid base address during IRQ init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-29OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configsPaul Walmsley
Convert CONFIG_ARCH_OMAP34XX to CONFIG_ARCH_OMAP3, and CONFIG_ARCH_OMAP24XX to CONFIG_ARCH_OMAP2, in preparation for Tony's multi-OMAP patches. While here, update some copyrights, convert instances of "34xx" to "3xxx" where applicable, and convert preprocessor directives of the form #if defined(CONFIG_ARCH_OMAP2) | defined(CONFIG_ARCH_OMAP3) to #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) for standardization. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2010-01-29OMAP4: PRCM: Define shift macros as n instead of 1 << nRajendra Nayak
The macros defining the shift bits in registers for various register bit fields are defined as 1 << n. Instead define them as n. They can then be used as val << n. The changes are generated by updating the script which autogenerates the files modifed in the patch. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29OMAP2/3/4 clock: rename and clean the omap2_clk_init() functionsPaul Walmsley
Rename the omap2_clk_init() in the OMAP2, 3, and 4 clock code to be omap2xxx_clk_init(), omap3xxx_clk_init(), etc. Remove all traces of the (commented) old virt_prcm_set code from omap3xxx_clk_init() and omap4xxx_clk_init(), since this will be handled with the OPP code that is cooking in the PM branch. After this patch, there should be very little else in the clock code that blocks a multi-OMAP 2+3 kernel. (OMAP2420+OMAP2430 still has some outstanding issues that need to be resolved; this is pending on some additions to the hwmod data.) Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29OMAP3 DPLL: reorganize static functionsPaul Walmsley
Move all static functions up to the top of the file to match the practice in other OMAP clock code. Make omap3_noncore_dpll_program() static (noted by sparse) and prepend an underscore to the function name to mark that it is file-local. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29OMAP2/3/4 clock: omap2_clk_prepare_for_reboot() is OMAP2xxx-onlyPaul Walmsley
omap2_clk_prepare_for_reboot() is only applicable to OMAP2xxx chips, so rename it to omap2xxx_clk_prepare_for_reboot() and only call it when running on OMAP2xxx chips. Remove the old stub in the OMAP3 clock code. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29OMAP2/3 clock: remove unnecessary includes and clean up headerPaul Walmsley
Now that almost all of the code has been removed from clock2xxx.c and clock34xx.c, many of the includes are now unnecessary and can be removed. While we're here, standardize the initial comment blocks. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Jouni Högander <jouni.hogander@nokia.com>
2010-01-29OMAP2/3 clock: clean up omap*_clk_arch_init()Paul Walmsley
In the OMAP3xxx clock code, remove the #ifdef CONFIG_ARCH_OMAP3 in clock34xx.c, since this file is only compiled for OMAP3xxx builds. Also, rename omap2_clk_arch_init in this file to omap3xxx_clk_arch_init() to pave the way for multi-OMAP kernels. Ensure that it is not executed on non-OMAP3xxx systems. In the OMAP2xxx clock code, rename omap2_clk_arch_init in this file to omap2xxx_clk_arch_init() to pave the way for multi-OMAP kernels. Ensure that it is not executed on non-OMAP2xxx systems. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29OMAP3 clock: split out DPLL3 M2 divider functions into ↵Paul Walmsley
mach-omap2/clkt34xx_dpll3m2.c Split the DPLL3 M2 divider clock functions out of clock34xx.c and move them into mach-omap2/clkt34xx_dpll3m2.c. This is intended to make the clock code easier to understand, since all of the functions needed to manage the OMAP3 DPLL3 M2 divider are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for the DPLL3 M2 clock alone. This should reduce unnecessary console noise when debugging DVFS. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap34xx/ directory, rather than shared with other chip types that don't use this clock type. This patch also lays the groundwork to skip compilation of this code on OMAP3 chips that don't support DVFS (e.g., AM35xx) via the Makefile, rather than via #ifdefs. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jouni Högander <jouni.hogander@nokia.com> Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-29OMAP2 clock: don't compile OMAP2430-only functions on non-2430 buildsPaul Walmsley
omap2430_clk_i2chs_find_idlest() doesn't need to be compiled in on non-2430 builds, so skip it in those cases to save memory. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-29OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.cPaul Walmsley
Move the sys_clk clock functions from clock2xxx.c to mach-omap2/clkt2xxx_sys.c. This is intended to make the clock code easier to understand, since all of the functions needed to manage the sys_clk are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for the sys_clk clock alone. This should reduce unnecessary console noise when debugging. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/ directory, rather than shared with other chip types that don't use this clock type. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Alexander Shishkin <virtuoso@slind.org>
2010-01-29OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.cPaul Walmsley
Move the osc_clk clock functions from clock2xxx.c to mach-omap2/clkt2xxx_osc. This is intended to make the clock code easier to understand, since all of the functions needed to manage the osc_clk are now located in their own file, rather than being mixed with other, unrelated functions. Clock debugging is also now more finely-grained, since the DEBUG macro can now be defined for osc_clk clocks alone. This should reduce unnecessary console noise when debugging. Also, if at some future point the mach-omap2/ directory is split into OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/ directory, rather than shared with other chip types that don't use this clock type. Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments to improve the patch description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Alexander Shishkin <virtuoso@slind.org>
generated by cgit v0.10.2 at 2024-11-15 03:37:44 (GMT)