summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
AgeCommit message (Collapse)Author
2011-11-02Merge branch 'next/pm' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/pm' of git://git.linaro.org/people/arnd/arm-soc: (66 commits) ARM: CSR: PM: use outer_resume to resume L2 cache ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII ARM: OMAP: voltage: voltage layer present, even when CONFIG_PM=n ARM: CSR: PM: add sleep entry for SiRFprimaII ARM: CSR: PM: save/restore irq status in suspend cycle ARM: CSR: PM: save/restore timer status in suspend cycle OMAP4: PM: TWL6030: add cmd register OMAP4: PM: TWL6030: fix ON/RET/OFF voltages OMAP4: PM: TWL6030: address 0V conversions OMAP4: PM: TWL6030: fix uv to voltage for >0x39 OMAP4: PM: TWL6030: fix voltage conversion formula omap: voltage: add a stub header file for external/regulator use OMAP2+: VC: more registers are per-channel starting with OMAP5 OMAP3+: voltage: update nominal voltage in voltdm_scale() not VC post-scale OMAP3+: voltage: rename omap_voltage_get_nom_volt -> voltdm_get_voltage OMAP3+: voltdm: final removal of omap_vdd_info OMAP3+: voltage: move/rename curr_volt from vdd_info into struct voltagedomain OMAP3+: voltage: rename scale and reset functions using voltdm_ prefix OMAP3+: VP: combine setting init voltage into common function OMAP3+: VP: remove unused omap_vp_get_curr_volt() ... Fix up trivial conflict in arch/arm/mach-prima2/l2x0.c (code removal vs edit)
2011-11-02Merge branch 'next/timer' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/timer' of git://git.linaro.org/people/arnd/arm-soc: clocksource: fixup ux500 build problems ARM: omap: use __devexit_p in dmtimer driver ARM: ux500: Reprogram timers upon resume ARM: plat-nomadik: timer: Export reset functions ARM: plat-nomadik: timer: Add support for periodic timers ARM: ux500: Move timer code to separate file ARM: ux500: add support for clocksource DBX500 PRCMU clocksource: add DBX500 PRCMU Timer support ARM: plat-nomadik: MTU sched_clock as an option ARM: OMAP: dmtimer: add error handling to export APIs ARM: OMAP: dmtimer: low-power mode support ARM: OMAP: dmtimer: skip reserved timers ARM: OMAP: dmtimer: pm_runtime support ARM: OMAP: dmtimer: switch-over to platform device driver ARM: OMAP: dmtimer: platform driver ARM: OMAP2+: dmtimer: convert to platform devices ARM: OMAP1: dmtimer: conversion to platform devices ARM: OMAP2+: dmtimer: add device names to flck nodes ARM: OMAP: Add support for dmtimer v2 ip
2011-11-02Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits) ARM: mach-mxs: fix machines' initializers order mmc: mxcmmc: explicitly includes mach/hardware.h arm/imx: explicitly includes mach/hardware.h in pm-imx27.c arm/imx: remove mx27_setup_weimcs() from mx27.h arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c arm/imx: remove mx31_setup_weimcs() from mx31.h ARM: tegra: devices.c should include devices.h ARM: tegra: cpu-tegra: unexport two functions ARM: tegra: cpu-tegra: sparse type fix ARM: tegra: dma: staticify some tables and functions ARM: tegra: tegra2_clocks: don't export some tables ARM: tegra: tegra_powergate_is_powered should be static ARM: tegra: tegra_rtc_read_ms should be static ARM: tegra: tegra_init_cache should be static ARM: tegra: pcie: 0 -> NULL changes ARM: tegra: pcie: include board.h ARM: tegra: pcie: don't cast __iomem pointers ARM: tegra: tegra2_clocks: 0 -> NULL changes ARM: tegra: tegra2_clocks: don't cast __iomem pointers ARM: tegra: timer: don't cast __iomem pointers ... Fix up trivial conflicts in arch/arm/mach-omap2/Makefile, arch/arm/mach-u300/{Makefile.boot,core.c} arch/arm/plat-{mxc,omap}/devices.c
2011-11-02Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits) ARM: pxa/cm-x300: properly set bt_reset pin ARM: mmp: rename SHEEVAD to GPLUGD ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT' ARM: i.MX28: shift frac value in _CLK_SET_RATE plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired ARM: mx5: fix clock usage for suspend ARM: pxa: use correct __iomem annotations ARM: pxa: sharpsl pm needs SPI ARM: pxa: centro and treo680 need palm27x ARM: pxa: make pxafb_smart_*() empty when not enabled ARM: pxa: select POWER_SUPPLY on raumfeld ARM: pxa: pxa95x is incompatible with earlier pxa ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ ARM: pxa: pxa95x/saarb depends on pxa3xx code ARM: pxa: allow selecting just one of TREO680/CENTRO ARM: pxa: export symbols from pxa3xx-ulpi ARM: pxa: make zylonite_pxa*_init declaration match code ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available ARM: at91: add defconfig for at91sam9g45 family ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig ...
2011-11-02Merge branch 'highbank/soc' into next/socArnd Bergmann
Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/mach-omap2/board-generic.c arch/arm/plat-mxc/include/mach/gpio.h
2011-11-01Merge branch 'depends/rmk/memory_h' into next/cleanup2Arnd Bergmann
Theis resolves lots of simple conflicts between the omap cleanup and the mach/memory.h removal series. Conflicts: arch/arm/mach-imx/mach-cpuimx27.c arch/arm/mach-omap1/board-ams-delta.c arch/arm/mach-omap1/board-generic.c arch/arm/mach-omap1/board-h2.c arch/arm/mach-omap1/board-h3.c arch/arm/mach-omap1/board-nokia770.c arch/arm/mach-omap1/board-osk.c arch/arm/mach-omap1/board-palmte.c arch/arm/mach-omap1/board-palmtt.c arch/arm/mach-omap1/board-palmz71.c arch/arm/mach-omap1/board-sx1.c arch/arm/mach-omap1/board-voiceblue.c arch/arm/mach-omap1/io.c arch/arm/mach-omap2/board-generic.c arch/arm/mach-omap2/io.c arch/arm/plat-omap/io.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31arm: Add export.h to ARM specific files as required.Paul Gortmaker
These files all make use of one of the EXPORT_SYMBOL variants or the THIS_MODULE macro. So they will need <linux/export.h> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31arm: fix implicit memset/string.h usage in various arch/arm filesPaul Gortmaker
To fix things like this: arch/arm/mach-omap2/usb-tusb6010.c:58: error: implicit declaration of function 'memset' arch/arm/kernel/leds.c:40: error: implicit declaration of function 'strcspn' arch/arm/kernel/leds.c:40: warning: incompatible implicit declaration of built-in function 'strcspn' arch/arm/kernel/leds.c:45: error: implicit declaration of function 'strncmp' arch/arm/kernel/leds.c:55: error: implicit declaration of function 'strlen' arch/arm/kernel/leds.c:55: warning: incompatible implicit declaration of built-in function 'strlen' arch/arm/mach-omap2/clockdomain.c:52: error: implicit declaration of function 'strcmp' Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31Merge branch 'depends/rmk/memory_h' into next/fixesArnd Bergmann
Fix up all conflicts between the memory.h cleanup and bug fixes. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31Merge branch 'next/fixes' into next/cleanupArnd Bergmann
Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/plat-mxc/include/mach/gpio.h drivers/video/omap/lcd_apollon.c drivers/video/omap/lcd_ldp.c drivers/video/omap/lcd_overo.c
2011-10-31Merge branch 'depends/omap2_dss' into next/cleanupArnd Bergmann
Omap cleanups conflicted with omap2_dss work in a nontrivial way, this is the most logical fixup. Conflicts: arch/arm/mach-omap2/board-2430sdp.c arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-apollon.c arch/arm/mach-omap2/board-h4.c arch/arm/mach-omap2/board-ldp.c arch/arm/mach-omap2/board-rx51.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31Merge branch 'depends/rmk/memory_h' into next/fixesArnd Bergmann
Fix up all conflicts between the memory.h cleanup and bug fixes. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31Merge branch 'depends/rmk/gpio' into next/fixesArnd Bergmann
This sorts out merge conflicts with the arm/gpio branch that already got merged into mainline Linux. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31Merge branch 'dt/gic' into highbank/socArnd Bergmann
Conflicts: arch/arm/Kconfig
2011-10-31Merge branch 'dt/gic' into next/dtArnd Bergmann
Conflicts: arch/arm/include/asm/localtimer.h arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-omap2/board-generic.c
2011-10-30Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits) iommu/core: Remove global iommu_ops and register_iommu iommu/msm: Use bus_set_iommu instead of register_iommu iommu/omap: Use bus_set_iommu instead of register_iommu iommu/vt-d: Use bus_set_iommu instead of register_iommu iommu/amd: Use bus_set_iommu instead of register_iommu iommu/core: Use bus->iommu_ops in the iommu-api iommu/core: Convert iommu_found to iommu_present iommu/core: Add bus_type parameter to iommu_domain_alloc Driver core: Add iommu_ops to bus_type iommu/core: Define iommu_ops and register_iommu only with CONFIG_IOMMU_API iommu/amd: Fix wrong shift direction iommu/omap: always provide iommu debug code iommu/core: let drivers know if an iommu fault handler isn't installed iommu/core: export iommu_set_fault_handler() iommu/omap: Fix build error with !IOMMU_SUPPORT iommu/omap: Migrate to the generic fault report mechanism iommu/core: Add fault reporting mechanism iommu/core: Use PAGE_SIZE instead of hard-coded value iommu/core: use the existing IS_ALIGNED macro iommu/msm: ->unmap() should return order of unmapped page ... Fixup trivial conflicts in drivers/iommu/Makefile: "move omap iommu to dedicated iommu folder" vs "Rename the DMAR and INTR_REMAP config options" just happened to touch lines next to each other.
2011-10-30Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6Linus Torvalds
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (270 commits) video: platinumfb: Add __devexit_p at necessary place drivers/video: fsl-diu-fb: merge diu_pool into fsl_diu_data drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_data drivers/video: fsl-diu-fb: only DIU modes 0 and 1 are supported drivers/video: fsl-diu-fb: remove unused panel operating mode support drivers/video: fsl-diu-fb: use an enum for the AOI index drivers/video: fsl-diu-fb: add several new video modes drivers/video: fsl-diu-fb: remove broken screen blanking support drivers/video: fsl-diu-fb: move some definitions out of the header file drivers/video: fsl-diu-fb: fix some ioctls video: da8xx-fb: Increased resolution configuration of revised LCDC IP OMAPDSS: picodlp: add missing #include <linux/module.h> fb: fix au1100fb bitrot. mx3fb: fix NULL pointer dereference in screen blanking. video: irq: Remove IRQF_DISABLED smscufx: change edid data to u8 instead of char OMAPDSS: DISPC: zorder support for DSS overlays OMAPDSS: DISPC: VIDEO3 pipeline support OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting video/omap: fix build dependencies ... Fix up conflicts in: - drivers/staging/xgifb/XGI_main_26.c Changes to XGIfb_pan_var() - drivers/video/omap/{lcd_apollon.c,lcd_ldp.c,lcd_overo.c} Removed (or in the case of apollon.c, merged into the generic DSS panel in drivers/video/omap2/displays/panel-generic-dpi.c)
2011-10-30Merge branches 'depends/rmk/io', 'depends/rmk/l2x0' and 'depends/rmk/gpio' ↵Arnd Bergmann
into highbank/soc
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-10-28Merge branch 'devel-stable' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-25Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits) usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push() usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB. USB: gadget: midi: memory leak in f_midi_bind_config() USB: gadget: midi: fix range check in f_midi_out_open() QE/FHCI: fixed the CONTROL bug usb: renesas_usbhs: tidyup for smatch warnings USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms EHCI: workaround for MosChip controller bug usb: gadget: file_storage: fix race on unloading USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF . USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board USB: Fix runtime wakeup on OHCI xHCI/USB: Make xHCI driver have a BOS descriptor. usb: gadget: add new usb gadget for ACM and mass storage ...
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-25Merge branch 'misc' into for-linusRussell King
Conflicts: arch/arm/mach-integrator/integrator_ap.c
2011-10-25Merge branches 'arnd-randcfg-fixes', 'debug', 'io' (early part), 'l2x0', ↵Russell King
'p2v', 'pgt' (early part) and 'smp' into for-linus
2011-10-24mfd: remove CONFIG_MFD_SUPPORTArnd Bergmann
We currently have two symbols to control compilation the MFD subsystem, MFD_SUPPORT and MFD_CORE. The MFD_SUPPORT is actually not required at all, it only hides the submenu when not set, with the effect that Kconfig warns about missing dependencies when another driver selects an MFD driver while MFD_SUPPORT is disabled. Turning the MFD submenu back from menuconfig into a plain menu simplifies the Kconfig syntax for those kinds of users and avoids the surprise when the menu suddenly appears because another driver was enabled that selects this symbol. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-24arm: BeagleBoard: add support for the twl4030-madcKyle Manna
Signed-off-by: Kyle Manna <kyle@kylemanna.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-23Merge branch 'ppi-irq-core-for-rmk' of ↵Russell King
git://github.com/mzyngier/arm-platforms into devel-stable
2011-10-23ARM: gic: consolidate PPI handlingMarc Zyngier
PPI handling is a bit of an odd beast. It uses its own low level handling code and is hardwired to the local timers (hence lacking a registration interface). Instead, switch the low handling to the normal SPI handling code. PPIs are handled by the handle_percpu_devid_irq flow. This also allows the removal of some duplicated code. Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Brown <davidb@codeaurora.org> Tested-by: David Brown <davidb@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-10-21Merge branches 'amd/fixes', 'debug/dma-api', 'arm/omap', 'arm/msm', 'core', ↵Joerg Roedel
'iommu/fault-reporting' and 'api/iommu-ops-per-bus' into next Conflicts: drivers/iommu/amd_iommu.c drivers/iommu/iommu.c
2011-10-20ARM: smp: fix clipping of number of CPUsRussell King
Rather than clipping the number of CPUs using the compile-time NR_CPUS constant, use the runtime nr_cpu_ids value instead. This allows the nr_cpus command line option to work as expected. Cc: <stable@kernel.org> Reported-by: Mark Salter <msalter@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-19ARM: OMAP: Warn if omap_ioremap is called before SoC detectionTony Lindgren
We don't have cpu_is_omapxxxx SoC detection initialized until SoC detection is initialized from init_early. Note that with the common map_io we should no longer need cpu_is_omapxxxx for ioremap. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-19ARM: OMAP: Move set_globals initialization to happen in init_earlyTony Lindgren
Otherwise we can't do generic map_io as we currently rely on static mappings that work only because of arch_ioremap. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-19ARM: OMAP: Map SRAM later on with ioremap_exec()Tony Lindgren
This allows us to remove omap hacks for map_io. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-19ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is doneTony Lindgren
This way we don't need to initialize SoC detection early and can start using generic map_io. Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-18Merge branch 'mach_memory_h' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2011-10-17ARM: 7022/1: allow to detect conflicting zreladdrsSascha Hauer
Boards used to specify zreladdr in their Makefile.boot with zreladdr-y := x, so conflicting zreladdrs were silently overwritten. This patch changes this to zreladdr-y += x, so that we end up with multiple words in zreladdr in such a case. We can detect this later and complain if necessary. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-08Merge branch 'depends/rmk/devel-stable' into next/cleanupArnd Bergmann
2011-10-07ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 onlyPaul Walmsley
Based on the documents that I have here, there doesn't appear to be an equivalent to erratum i443 for OMAP3630, so restrict this one to OMAP34xx chips. Also, explicitly restrict this erratum to EMU and HS devices. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-07ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detectionPaul Walmsley
The way that we detect which OMAP3 chips support I/O wakeup and software I/O chain clock control is broken. Currently, I/O wakeup is marked as present for all OMAP3 SoCs other than the AM3505/3517. The TI81xx family of SoCs are at present considered to be OMAP3 SoCs, but don't support I/O wakeup. To resolve this, convert the existing blacklist approach to an explicit, whitelist support, in which only SoCs which are known to support I/O wakeup are listed. (At present, this only includes OMAP34xx, OMAP3503, OMAP3515, OMAP3525, OMAP3530, and OMAP36xx.) Also, the current code incorrectly detects the presence of a software-controllable I/O chain clock on several chips that don't support it. This results in writes to reserved bitfields, unnecessary delays, and console messages on kernels running on those chips: http://www.spinics.net/lists/linux-omap/msg58735.html Convert this test to a feature test with a chip-by-chip whitelist. Thanks to Dave Hylands <dhylands@gmail.com> for reporting this problem and doing some testing to help isolate the cause. Thanks to Steve Sakoman <sakoman@gmail.com> for catching a bug in the first version of this patch. Thanks to Russell King <linux@arm.linux.org.uk> for comments. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Dave Hylands <dhylands@gmail.com> Cc: Steve Sakoman <sakoman@gmail.com> Tested-by: Steve Sakoman <sakoman@gmail.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-07ARM: OMAP3: PM: fix pwrdm_post_transition call sequenceCharulatha V
The context lost count is modified in omap_sram_idle() path when pwrdm_post_transition() is called. But pwrdm_post_transition() is called only after omap_gpio_resume_after_idle() is called. Correct this so that context lost count is modified before calling omap_gpio_resume_after_idle(). This would be useful when OMAP GPIO save/restore context is called by the OMAP GPIO driver itself. Signed-off-by: Charulatha V <charu@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-07ARM: OMAP: AM35x: remove hwmods that aren't genericAbhilash K V
Removing modules iva, sr1_hwmod, sr2_hwmod, mailbox from the base omap3xxx_hwmods list, so that they can be excluded for am35x. This removes quite a few warnings on boot for AM35x. Signed-off-by: Abhilash K V <abhilash.kv@ti.com> [paul@pwsan.com: dropped 'mailbox class' comments; updated changelog] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07ARM: OMAP: ctrl: Fix CONTROL_DSIPHY register fieldsArchit Taneja
Fix the shift and mask macros for DSIx_PPID fields in CONTROL_DSIPHY. The OMAP4430 Public TRM vV has these fields mentioned correctly. Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07ARM: OMAP3+: Update DPLL Fint range for OMAP36xx and OMAP4xxx devicesJon Hunter
The OMAP36xx and OMAP4xxx DPLLs have a different internal reference clock frequency (fint) operating range than OMAP3430. Update the dpll_test_fint() function to check for the correct frequency ranges for OMAP36xx and OMAP4xxx. For OMAP36xx and OMAP4xxx devices, DPLLs fint range is 0.5MHz to 2.5MHz for j-type DPLLs and otherwise it is 32KHz to 52MHz for all other DPLLs. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07ARM: OMAP4: clock: Add missing clock divider for OCP_ABE_ICLKJon Hunter
The parent clock of the OCP_ABE_ICLK is the AESS_FCLK and the parent clock of the AESS_FCLK is the ABE_FCLK... ABE_FCLK --> AESS_FCLK --> OCP_ABE_ICLK The AESS_FCLK and OCP_ABE_ICLK clocks both have dividers which determine their operational frequency. However, the dividers for the AESS_FCLK and OCP_ABE_ICLK are controlled via a single bit, which is the CM1_ABE_AESS_CLKCTRL[24] bit. When this bit is set to 0, the AESS_FCLK divider is 1 and the OCP_ABE_ICLK divider is 2. Similarly, when this bit is set to 1, the AESS_FCLK divider is 2 and the OCP_ABE_ICLK is 1. The above relationship between the AESS_FCLK and OCP_ABE_ICLK dividers ensure that the OCP_ABE_ICLK clock is always half the frequency of the ABE_CLK... OCP_ABE_ICLK = ABE_FCLK/2 The divider for the OCP_ABE_ICLK is currently missing so add a divider that will ensure the OCP_ABE_ICLK frequency is always half the ABE_FCLK frequency. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07ARM: OMAP4460: Clock: Adding support for 4460 specific clocksPaul Walmsley
OMAP4460 specific clocks are not getting added as the cpu_is_omap44xx is choosing only OMAP4430 specific clock nodes. Changing it to add to OMAP4460 specific clocks also. This is clocks are required of temperature sensor. Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Cc: paul@pwsan.com [paul@pwsan.com: updated to apply] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07ARM: OMAP3+: dpll: use DPLLs recalc function instead of omap2_get_dpll_rateJon Hunter
This is a continuation of Mike Turquette's patch "OMAP3+: use DPLL's round_rate when setting rate". omap3_noncore_dpll_set_rate() and omap3_noncore_dpll_enable() call omap2_get_dpll_rate() explicitly. It may be necessary for some DPLLs to use a different function and so use the DPLLs recalc() function pointer instead. An example is the DPLL_ABE on OMAP4 which can have a 4X multiplier in addition to the usual MN multipler and dividers and therefore uses a different round_rate and recalc function. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Cc: Mike Turquette <mturquette@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> [paul@pwsan.com: merged this patch with Mike's "use clock's recalc in DPLL handling" patch; also reported by Misael] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07ARM: OMAP3+: dpll: assign clk rate from rounded rate during rate setMike Turquette
The rounded rate can differ from target rate, so to better reflect reality set clk->rate equal to the rounded rate when setting DPLL frequency. This avoids issues where the DPLL frequency is slightly different than what debugfs clock tree reports using the old target rate. An example of a clock that requires this is DPLL_ABE on OMAP4 which can have a 4x multiplier on top of the usual MN dividers depending on register settings. This requires a special round_rate function that might yield a rate different from the initial target. Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07ARM: OMAP3+: dpll: use DPLL's round_rate when setting rateMike Turquette
omap3_noncore_dpll_set_rate uses omap2_dpll_round_rate explicitly. Instead use the struct clk pointer's round_rate function to allow for DPLL's with special needs. An example of a clock that requires this is DPLL_ABE on OMAP4 which can have a 4x multiplier on top of the usual MN dividers depending on register settings. This requires a special round_rate function that might yield a rate different from the initial target. Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: split rate assignment portion into a separate patch] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07ARM: OMAP4: clock: round_rate and recalc functions for DPLL_ABEMike Turquette
OMAP4 DPLL_ABE can enable a 4X multipler on top of the normal MN multipler and divider. This is achieved by setting CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit in CKGEN module of CM1. From the OMAP4 TRM: Fdpll = Fref x 2 x (4 x M/(N+1)) in case REGM4XEN bit field is set (only applicable to DPLL_ABE). Add new round_rate() and recalc() functions for OMAP4, that check the setting of REGM4XEN bit and handle this appropriately. The new functions are a simple wrapper on top of the existing omap2_dpll_round_rate() and omap2_dpll_get_rate() functions to handle the REGM4XEN bit. The REGM4XEN bit is only implemented for the ABE DPLL on OMAP4 and so only dpll_abe_ck uses omap4_dpll_regm4xen_round_rate() and omap4_dpll_regm4xen_recalc() functions. Signed-off-by: Mike Turquette <mturquette@ti.com> Tested-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: fixed attempt to return a negative from a fn returning unsigned; pass along errors from omap2_dpll_round_rate(); added documentation; added Jon's S-o-b] Signed-off-by: Paul Walmsley <paul@pwsan.com>
generated by cgit v0.10.2 at 2024-10-04 06:58:25 (GMT)