summaryrefslogtreecommitdiff
path: root/arch/arm/mach-realview/Kconfig
AgeCommit message (Collapse)Author
2009-12-09ARM: RealView: Fix typo in the RealView/PBX Kconfig entryCatalin Marinas
A previous patch was introducing a SPARSEMEM dependency on !HIGH_PHYS_OFFSET but it should actually be !REALVIEW_HIGH_PHYS_OFFSET. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-11-05RealView: Add sparsemem support for the RealView PBX platformCatalin Marinas
The RealView PBX board has two 512MB blocks of memory - one at 0x70000000 (with 256MB mirror at 0) and another at 0x20000000. Only the block at 0x70000000 (or the mirror at 0) may be used for DMA (e.g. framebuffer). This patch adds the sparsemem definitions to allow the use of all the memory split as follows: 256MB @ 0x00000000 (ZONE_DMA) 512MB @ 0x20000000 (ZONE_NORMAL) 256MB @ 0x80000000 (ZONE_NORMAL) Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24nommu: Do not allow REALVIEW_HIGH_PHYS_OFFSET if !MMUCatalin Marinas
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-11Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/kernel/smp.c arch/arm/mach-realview/Makefile arch/arm/mach-realview/platsmp.c
2009-05-31[ARM] Kconfig: remove 'default n'Russell King
Kconfig entries default to n, so there's no need for this to be explicitly specified. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-30RealView: Allow access to the secure flash memory block on PB1176Catalin Marinas
This patch adds a Kconfig option for specifying whether Linux will only be run in secure mode on the RealView PB1176 platform. Enabling it will make the secure flash memory block (64MB @ 0x3c000000) available to Linux. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-05-30RealView: Add support for the RealView/PBX platformColin Tuckley
This is a RealView platform supporting core tiles with ARM11MPCore, Cortex-A8 or Cortex-A9 (multicore) processors. It has support for MMC, CompactFlash, PCI-E. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-02-19[ARM] 5396/1: RealView: Use PATA_PLATFORM to access the CompactFlashCatalin Marinas
This driver adds the platform_device definitions to allow the use of CompactFlash on the RealView PB11MPCore and PB-A8 platforms. Note that the CompactFlash controller is expected to be initialised by the Boot Monitor and support the True IDE mode. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01Merge branch 'for-rmk-realview' of git://linux-arm.org/linux-2.6 into develRussell King
2008-12-01RealView: Select CPU_V6 for MACH_REALVIEW_PB11MPCatalin Marinas
This seems to be missing from the arm:devel branch, though the other RealView configurations were modified accordingly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01RealView: Add Cortex-A9 support to the EB boardJon Callan
This patch adds the necessary definitions and Kconfig entries to enable Cortex-A9 (ARMv7 SMP) tiles on the RealView/EB board. Signed-off-by: Jon Callan <Jon.Callan@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01RealView: Add support for the Cortex-A8 Platform BaseboardBahadir Balban
This patch adds support for RealView/PB-A8, a platform based on Cortex-A8 with support for PCI-E and compact flash. Signed-off-by: Bahadir Balban <bahadir.balban@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01RealView: Allow PHYS_OFFSET at 0x70000000Catalin Marinas
RealView boards like PB11MPCore have 512MB of RAM available contiguously at 0x70000000. Half of the memory is mirrored at 0x00000000 for backwards compatibility. This patch adds the CONFIG_REALVIEW_HIGH_PHYS_OFFSET option option to change the physical base address so that the full amount of RAM is available to Linux. Note that the EB board has 256MB of RAM also mirrored at 0x70000000, the only board without this feature being PB1176. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-11-27[ARM] Arrange for platforms to select appropriate CPU supportRussell King
Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-18Allow the L2X0 outer cache support to be configurableCatalin Marinas
By default, this option was selected by the platform Kconfig. This patch adds "depends on" to L2X0 so that it can be enabled/disabled manually. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Add the configuration and build changes for PB1176Bahadir Balban
This patch enables the building of Linux for the PB1176 platform. Signed-off-by: Bahadir Balban <bahadir.balban@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Enable the configuration options for PB11MPCoreBahadir Balban
This patch adds the PB11MPCore support to the corresponding Kconfig and Makefile to enable building. Signed-off-by: Bahadir Balban <bahadir.balban@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-02-04[ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration optionCatalin Marinas
This patch changes the REALVIEW_MPCORE configuration option to REALVIEW_EB_ARM11MP since this is only specific to RealView/EB. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15[ARM] 4130/1: Add L220 support to RealView/EBCatalin Marinas
This patch enables the L220 on the RealView/EB MPCore platform. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15[ARM] 4109/2: Add support for the RealView/EB MPCore revC platformCatalin Marinas
The kernel originally supported revB only. This patch enables revC by default and adds a config option for building the kernel for the revB platform. Since the SCU base address was hard-coded in the proc-v6.S file (and only valid for RealView/EB revB), this patch also adds a more generic support for defining the SCU information. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13[ARM] Remove useless 'default n' from Kconfig filesRussell King
The default is already 'n' so there's no need to explicitly state it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-07[ARM] Add support for Realview with MPcore tileRussell King
Add uniprocessor support for Realview platform fitted with the MPcore (SMP) tile. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-31[ARM] Add support for ARM RealView boardCatalin Marinas
Support for RealView EB. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>