summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile/clock-sh73a0.c
AgeCommit message (Collapse)Author
2012-03-12ARM: mach-shmobile: rename clk_init() to shmobile_clk_init()Magnus Damm
Rename clk_init() to shmobile_clk_init() to avoid a potential future name space collision with the common clock framework. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-12ARM: mach-shmobile: sh73a0 sh_clk_ops renameMagnus Damm
Convert sh73a0 to use sh_clk_ops. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-01-24ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-14Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6Linus Torvalds
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (175 commits) module_param: make bool parameters really bool (drivers/video/i810) Revert "atmel_lcdfb: Adjust HFP calculation so it matches the manual." OMAPDSS: HDMI: Disable DDC internal pull up OMAPDSS: HDMI: Move duplicate code from boardfile OMAPDSS: add OrtusTech COM43H4M10XTC display support OMAP: DSS2: Support for UMSH-8173MD TFT panel ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver OMAPDSS: HDMI: Create function to enable HDMI audio ASoC: OMAP: HDMI: Correct signature of ASoC functions ASoC: OMAP: HDMI: Introduce driver data for audio codec grvga: fix section mismatch warnings video: s3c-fb: Don't keep device runtime active when open video: s3c-fb: Hold runtime PM references when touching registers video: s3c-fb: Take a runtime PM reference when unblanked video: s3c-fb: Disable runtime PM in error paths from probe video: s3c-fb: Use s3c_fb_enable() to enable the framebuffer video: s3c-fb: Make runtime PM functional again drivers/video: fsl-diu-fb: merge fsl_diu_alloc() into map_video_memory() drivers/video: fsl-diu-fb: add default platform ops functions drivers/video: fsl-diu-fb: remove broken reference count enabling the display ...
2012-01-09Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into sh-latest Conflicts: arch/arm/mach-shmobile/clock-sh73a0.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-12-06sh: clkfwk: clock-sh73a0: all div6_clks use SH_CLK_DIV6_EXT()Kuninori Morimoto
Current div6 clocks can specify their current parent clocks from its register value if it is registered by sh_clk_div6_reparent_register(). This patch modifies all div6 clocks into SH_CLK_DIV6_EXT(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-24Merge branches 'rmobile/core', 'rmobile/kota2' and 'rmobile/ag5' into ↵Paul Mundt
rmobile-fixes-for-linus
2011-11-24ARM: mach-shmobile: SH73A0 external Ethernet fixMagnus Damm
Keep the ZB clock enabled on sh73a0 to allow the BSC to access external peripherals hooked up to CS signals. This is needed to unbreak Ethernet support on sh73a0 boards such as AG5EVM and Kota2 together with the following patch: 794d78f drivers: sh: late disabling of clocks V2 Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-24ARM: mach-shmobile: Kota2 TPU LED platform dataMagnus Damm
This patch updates the Kota2 board support code to use the recently merged TPU LED driver whenever possible. The sh73a0 SoC has 5 TPU hardware blocks each with 4 timer channels which in theory allows a total of 20 LEDs to be controlled by "leds-renesas-tpu" driver instances. The Kota2 board has 4 LEDs connected to GPIO pins that also come with TPU pin functions, so this patch ties up these 4 LEDS and leaves the remaining 3 LEDS for the GPIO based LED driver. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-21fbdev: sh_mipi_dsi: tidyup dsip_clkKuninori Morimoto
dsipck clock is controled by CLKDEV_ICK_ID() in clock-shxxx. dsi0p_clk/dsi1p_clk naming is not needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-08-29ARM: mach-shmobile: clock-sh73a0: tidyup CKSCR main clock selecterKuninori Morimoto
MAINCKSEL is [29:28], not [27:24] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-11sh: move CLKDEV_xxx_ID macro to sh_clk.hKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMACMagnus Damm
Add SY-DMAC support via shdma.c to the sh73a0 SoC including slave ids, platform data and clock bindings. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24ARM: mach-shmobile: Add SDHI support for AG5EVM and sh73a0Magnus Damm
Add SDHI0 and SDHI1 support to the AG5EVM board including platform data, pinmux configuration and clock bindings. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-01ARM: mach-shmobile: Add sh73a0 MIPI-CSI and CEU clocksMagnus Damm
Update the sh73a0 CPGA to support clocks for CEU and MIPI-CSI. This includes MSTP bits for CSI and CEU and div6 clkdev bindings for VCK1-3. Fix the order of the MSTP32 entries in the clkdev table while at it. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-20ARM: mach-shmobile: AG5EVM LCDC / MIPI-DSI platform dataMagnus Damm
Add platform data for MIPI-DSI and LCDC on the AG5EVM board. The sh73a0 clkdev bindings are also updated. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-20ARM: mach-shmobile: sh73a0 CPGA fix for PLL CFG bitMagnus Damm
PLL1 and PLL2 in the sh73a0 CPGA has a CFG bit that must be taken into account to correctly calculate the frequency. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh73a0 CPGA fix for IrDA MSTPMagnus Damm
Fix a typo for the sh73a0 CPGA code dealing with the IrDA hardware block on the AG5EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: sh73a0 CPGA fix for FRQCRA M3Magnus Damm
Fix the M3 field offset for the FRQCRA register in the sh73a0 CPGA. It should be 12, not 8. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-18ARM: mach-shmobile: ag5evm: Add IrDA supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: Fix up clkdev fallout for SH73A0.Paul Mundt
Use the new linux/clkdev.h to get it building again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-05Merge branches 'rmobile/mmcif', 'rmobile/ag5' and 'rmobile/mackerel' into ↵Paul Mundt
rmobile-latest Conflicts: arch/arm/mach-shmobile/Kconfig Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-05ARM: mach-shmobile: sh73a0: fix div4 tableTakashi YOSHII
sh73a0 has divisor[12] setting as 1/7 on FRQCRA. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22ARM: mach-shmobile: Add eMMC support through MMCIF on AG5EVMTakashi YOSHII
Adding platform resources, PFC setting and release reset pin for eMMC on ag5evm. [damm@opensource.se: Add MSTP code for MMCIF] Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22ARM: mach-shmobile: sh73a0 CPGA fix for KEYSCMagnus Damm
Fix the sh73a0 KEYSC clock control by adding MSTP403 to mstp_clks[]. Use KEYSC instead of KEYSC0 in comments. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22ARM: mach-shmobile: sh73a0 TMU supportMagnus Damm
Add support for 2 TMU timer channels on sh73a0. One timer channel is used for clocksource and the other is used for clockevents. All channels in the same TMU block share MSTP bit as usual. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-03ARM: mach-shmobile: AG5 clock framework improvementsMagnus Damm
This patch improves the state of the AG5 clock framework support. The main clock parent is automatically detected, but most of the clocks are not used by any driver or subsystem at this point. More work is needed for support of multi media hardware such as FSI and/or LCDC/MIPI-DSI. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-25ARM: mach-shmobile: clock-sh73a0: modify MSTP orderKuninori Morimoto
This patch permuted clock arrays in the order of MSTP Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24ARM: mach-shmobile: sh73a0 i2c_shmobile support.Yoshii Takashi
Platform device resource/data definition for CPU, and clkdev entries Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24ARM: mach-shmobile: ag5evm: scan keyboard supportYoshii Takashi
This consists of platform device resources/data for the board, and simple clvdev entry for MSTP bit for keysc module. This support only 49 of 80 key-switches on the board. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-18ARM: mach-shmobile: Initial AG5 and AG5EVM supportMagnus Damm
This patch adds initial support for Renesas SH-Mobile AG5. At this point the AG5 CPU support is limited to the ARM core, SCIF serial and a CMT timer together with L2 cache and the GIC. The AG5EVM board also supports Ethernet. Future patches will add support for GPIO, INTCS, CPGA and platform data / driver updates for devices such as IIC, LCDC, FSI, KEYSC, CEU and SDHI among others. The code in entry-macro.S will be cleaned up when the ARM IRQ demux code improvements have been merged. Depends on the AG5EVM mach-type recently registered but not yet present in arch/arm/tools/mach-types. As the AG5EVM board comes with 512MiB memory it is recommended to turn on HIGHMEM. Many thanks to Yoshii-san for initial bring up. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v0.10.2 at 2024-11-17 18:14:03 (GMT)