summaryrefslogtreecommitdiff
path: root/arch/arm/mach-vexpress
AgeCommit message (Collapse)Author
2013-01-02ARM: 7609/1: disable errata work-arounds which access secure registersRob Herring
In order to support secure and non-secure platforms in multi-platform kernels, errata work-arounds that access secure only registers need to be disabled. Make all the errata options that fit in this category depend on !CONFIG_ARCH_MULTIPLATFORM. This will effectively remove the errata options as platforms are converted over to multi-platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-13Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC driver specific changes from Olof Johansson: "A collection of mostly SoC-specific driver updates: - a handful of pincontrol and setup changes - new drivers for hwmon and reset controller for vexpress - timing support updates for OMAP (gpmc and other interfaces) - plus a collection of smaller cleanups" * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: ux500: fix pin warning ARM: OMAP2+: tusb6010: generic timing calculation ARM: OMAP2+: smc91x: generic timing calculation ARM: OMAP2+: onenand: generic timing calculation ARM: OMAP2+: gpmc: generic timing calculation ARM: OMAP2+: gpmc: handle additional timings ARM: OMAP2+: nand: remove redundant rounding gpio: samsung: use pr_* instead of printk ARM: ux500: fixup magnetometer pins ARM: ux500: add STM pin configuration ARM: ux500: 8500: add pinctrl support for uart1 and uart2 ARM: ux500: cosmetic fixups for uart0 gpio: samsung: Fix input mode setting function for GPIO int ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip ARM: ux500: 8500: define SDI sleep states ARM: vexpress: Reset driver ARM: ux500: 8500: update SKE keypad pinctrl table hwmon: Versatile Express hwmon driver ARM: ux500: delete duplicate macro ARM: ux500: 8500: add IDLE pin configuration for SPI ...
2012-12-12Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-11-30Fix build when CONFIG_W1_MASTER_GPIO=m b exporting "allnodes"Randy Dunlap
ERROR: "allnodes" [drivers/w1/masters/w1-gpio.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> [grant.likely: allnodes is too generic; rename to of_allnodes] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Ville Syrjala <syrjala@sci.fi>
2012-11-05ARM: vexpress: Remove motherboard dependencies in the DTS filesPawel Moll
The way the VE motherboard Device Trees were constructed enforced naming and structure of daughterboard files. This patch makes it possible to simply include the motherboard description anywhere in the main Device Tree and retires the "arm,v2m-timer" alias - any of the motherboard SP804 timers will be used instead. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-11-05ARM: vexpress: Start using new Versatile Express infrastructurePawel Moll
This patch starts using all the configuration infrastructure. - generic GPIO library is forced now - sysreg GPIOs are used as MMC CD and WP information sources; thanks to this MMCI auxiliary data is not longer necessary - DVI muxer and mode control is removed from non-DT V2P-CA9 code as this is now handled by the vexpress-dvi driver - clock generators control is removed as is being handled by the common clock driver now - the sysreg and sysctl control is now delegated to the appropriate drivers and all related code was removed - NOR Flash set_vpp function has been removed as the control bit used does _not_ control its VPP line, but the #WP signal instead (which is de facto unusable in case of Linux MTD drivers); this also allowed the remove its DT auxiliary data The non-DT code defines only minimal required number of the config devices. Device Trees are updated to make use of all new features. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-10-18ARM: vexpress: Reset driverPawel Moll
This is a simple driver providing platform restart and power off functions using VE config infrastructure. By writing to the "active" attribute of the reboot or reset device, user can decide what if the platform is supposed to execute full power cycle (reboot, default) or simply assert system level reset signal. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Conflicts: include/linux/vexpress.h
2012-10-06Merge tag 'stable/for-linus-3.7-arm-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull ADM Xen support from Konrad Rzeszutek Wilk: Features: * Allow a Linux guest to boot as initial domain and as normal guests on Xen on ARM (specifically ARMv7 with virtualized extensions). PV console, block and network frontend/backends are working. Bug-fixes: * Fix compile linux-next fallout. * Fix PVHVM bootup crashing. The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports ARMv7 platforms. The goal in implementing this architecture is to exploit the hardware as much as possible. That means use as little as possible of PV operations (so no PV MMU) - and use existing PV drivers for I/Os (network, block, console, etc). This is similar to how PVHVM guests operate in X86 platform nowadays - except that on ARM there is no need for QEMU. The end result is that we share a lot of the generic Xen drivers and infrastructure. Details on how to compile/boot/etc are available at this Wiki: http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions and this blog has links to a technical discussion/presentations on the overall architecture: http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/ * tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits) xen/xen_initial_domain: check that xen_start_info is initialized xen: mark xen_init_IRQ __init xen/Makefile: fix dom-y build arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls ...
2012-09-24arm: introduce a DTS for Xen unprivileged virtual machinesStefano Stabellini
Given that the xenvm machine is based on vexpress but with an extremely limited selection of peripherals (the guest is supposed to use virtual devices instead), add "xen,xenvm" to the list of compatible machines in mach-vexpress. Changes in v3: - add comments to mark fields that are likely to be changed by the hypervisor. Changes in v2: - remove include skeleton; - use #address-cells = <2> and #size-cells = <2>; - remove the debug bootargs; - use memory@80000000 instead of memory; - remove the ranges and interrupt-map from the motherboard node; - set the machine compatible to "xen,xenvm-4.2", "xen,xenvm"; - rename the dts file to xenvm-4.2.dts; - add "xen,xenvm" to the list of compatible DT strings to mach-vexpress. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Pawel Moll <pawel.moll@arm.com> (v2m changes)
2012-09-22Merge branch 'multiplatform/smp_ops' into next/multiplatformOlof Johansson
* multiplatform/smp_ops: ARM: consolidate pen_release instead of having per platform definitions ARM: smp: Make SMP operations mandatory ARM: SoC: convert spear13xx to SMP operations ARM: SoC: convert imx6q to SMP operations ARM: SoC: convert highbank to SMP operations ARM: SoC: convert shmobile SMP to SMP operations ARM: SoC: convert ux500 to SMP operations ARM: SoC: convert MSM to SMP operations ARM: SoC: convert Exynos4 to SMP operations ARM: SoC: convert Tegra to SMP operations ARM: SoC: convert OMAP4 to SMP operations ARM: SoC: convert VExpress/RealView to SMP operations ARM: SoC: add per-platform SMP operations Conflicts due to file moves or removals in: arch/arm/mach-msm/board-msm8960.c arch/arm/mach-msm/board-msm8x60.c arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to board file cleanup: arch/arm/mach-tegra/board-paz00.c Conflicts due to cpu hotplug addition: arch/arm/mach-tegra/hotplug.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson
into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-14ARM: vexpress: convert to multi-platformRob Herring
Convert vexpress to multi-platform. This always enables vexpress DT and makes it the default v7 platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-14ARM: vexpress: remove dependency on mach/* headersArnd Bergmann
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-14ARM: move all dtb targets out of Makefile.bootRob Herring
In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-14ARM: vexpress: move debug macros to include/debugRob Herring
Move vexpress debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-09-14ARM: make mach/gpio.h headers optionalRob Herring
Most platforms don't need mach/gpio.h and it prevents multi-platform kernel images. Add CONFIG_NEED_MACH_GPIO_H and make platforns select it if they need gpio.h. This is platforms that define __GPIOLIB_COMPLEX or have lots of implicit includes pulled in by mach/gpio.h. at91 and omap have gpio clean-up pending and can drop CONFIG_NEED_MACH_GPIO_H once that is in. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-14ARM: consolidate pen_release instead of having per platform definitionsMarc Zyngier
Almost each SMP platform defines pen_release to manage booting secondary CPUs. This of course clashes with the single zImage effort. Add the pen_release definition to the ARM SMP code, and remove all others. This should only be used by platforms which lack any kind of CPU power management... Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-13ARM: SoC: convert VExpress/RealView to SMP operationsMarc Zyngier
Convert both Realview and VExpress to use struct smp_operations to provide their SMP and CPU hotplug operation. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-23ARM: pmu: remove arm_pmu_type enumerationSudeep KarkadaNagesha
The arm_pmu_type enumeration was initially introduced to identify different PMU types in the system, the usual one being that on the CPU (ARM_PMU_DEVICE_CPU). With the removal of the PMU reservation code and the introduction of devicetree bindings for the CPU PMU, the enumeration is no longer required. This patch removes the enumeration and updates the various CPU PMU platform devices so that they no longer pass an .id field referring to identify the PMU type. Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com> [will: cosmetic edits and actual removal of the enum type] Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-07-13ARM: vexpress: Config option for early printk consolePawel Moll
Versatile Express platform can be used in different configurations, the console UART used by early printk may be located at different addresses in the address space. This patch makes it possible to select the base address of a PL011 UART to be used as a console output in the kernel configuration. The default behaviour is still the heuristic detecting memory map on Cortex-A core tiles. The zImage decompressor will use the same configuration values or print out nothing if DEBUG_LL is not enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tilePawel Moll
This patch adds Device Tree file for the CoreTile Express A15x2 A7x3 (V2P-CA15_CA7). Note that the A7 cpu nodes are commented out, as the big.LITTLE-relevant patches are not upstreamed yet. Till this time one can use the board with two A15 cores only, keeping the A7s in reset by adding the following setting to the board.txt file in Versatile Express configuration tree: SCC: 0x018 0x00001FFF Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Add fixed regulator for SMSCPawel Moll
SMSC driver requires "vdd33a" and "vddvario" regulator supplies now. Add fixed regulator describing 3V3 power line (in both motherboard's Device Trees and the non-DT code) and force fixed regulator config option if regulators framework is enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-13ARM: vexpress: Initial common clock supportPawel Moll
This patch makes Versatile Express use the common clock framework instead of the plat-versatile implementation. It defines clock provider for VE's OSCs (clock generators) and registers all required fixed and variable clock sources (for both motherboard and core tile). This is a simple conversion of the existing state and will be extended (and migrated to drivers/clk) in the near future. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-12ARM: vexpress: Check master site in daughterboard's sysctl operationsPawel Moll
With recent enough motherboard firmware, core tile can be fitted in either of the two daughterboard sites. The non-DT tile code for V2P-CA9 did not check that when configuring DVI output nor setting CLCD pixel clock. Fixed now, providing "get master site" API in motherboard's code. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-12ARM: vexpress: remove automatic errata workaround selectionWill Deacon
The vexpress Kconfig setup tries to be clever^Whelpful and selects some errata workarounds for certain revisions of the Cortex-A9 and PL310, which may be required depending on the core tile. Since the mach-vexpress can support A5, A7 and A15 coretiles, let's make errata workaround selection optional. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-05-30Merge branch 'late/soc' into devel-lateOlof Johansson
* late/soc: ARM: vexpress: Remove twice included header files ARM: vexpress: Device Tree updates ARM: EXYNOS: Support suspend and resume for EXYNOS5250 ARM: EXYNOS: Add Clock register list for save and restore ARM: EXYNOS: Add PMU table for EXYNOS5250 ARM: EXYNOS: Rename of function for pm.c ARM: EXYNOS: Remove GIC save & restore function ARM: dts: Add node for interrupt combiner controller on EXYNOS5250 ARM: S3C24XX: add support for second irq set of S3C2416
2012-05-21ARM: vexpress: Remove twice included header filesThomas Weber
Remove duplicates of - linux/device.h and - asm/hardware/gic.h Signed-off-by: Thomas Weber <thomas@tomweber.eu> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-04-27ARM: vexpress: plug local timers into the DT codeMarc Zyngier
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-03-30Merge tag 'cleanup2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: cleanups of io includes" from Olof Johansson: "Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes, moving some of the oft-repeated macros to a common location and removing a bunch of boiler plate. This is another step closer to a common zImage for multiple platforms." Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes around it, tegra localtimer.o is *still* gone, yadda-yadda). * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: tegra: Include assembler.h in sleep.S to fix build break ARM: pxa: use common IOMEM definition ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol ARM: __io abuse cleanup ARM: create a common IOMEM definition ARM: iop13xx: fix missing declaration of iop13xx_init_early ARM: fix ioremap/iounmap for !CONFIG_MMU ARM: kill off __mem_pci ARM: remove bunch of now unused mach/io.h files ARM: make mach/io.h include optional ARM: clps711x: remove unneeded include of mach/io.h ARM: dove: add explicit include of dove.h to addr-map.c ARM: at91: add explicit include of hardware.h to uncompressor ARM: ep93xx: clean-up mach/io.h ARM: tegra: clean-up mach/io.h ARM: orion5x: clean-up mach/io.h ARM: davinci: remove unneeded mach/io.h include [media] davinci: remove includes of mach/io.h ARM: OMAP: Remove remaining includes for mach/io.h ARM: msm: clean-up mach/io.h ...
2012-03-29Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull more ARM updates from Russell King. This got a fair number of conflicts with the <asm/system.h> split, but also with some other sparse-irq and header file include cleanups. They all looked pretty trivial, though. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits) ARM: fix Kconfig warning for HAVE_BPF_JIT ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds ARM: 7349/1: integrator: convert to sparse irqs ARM: 7259/3: net: JIT compiler for packet filters ARM: 7334/1: add jump label support ARM: 7333/2: jump label: detect %c support for ARM ARM: 7338/1: add support for early console output via semihosting ARM: use set_current_blocked() and block_sigmask() ARM: exec: remove redundant set_fs(USER_DS) ARM: 7332/1: extract out code patch function from kprobes ARM: 7331/1: extract out insn generation code from ftrace ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format ARM: 7351/1: ftrace: remove useless memory checks ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path ARM: Versatile Express: add NO_IOPORT ARM: get rid of asm/irq.h in asm/prom.h ARM: 7319/1: Print debug info for SIGBUS in user faults ARM: 7318/1: gic: refactor irq_start assignment ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop ARM: 7315/1: perf: add support for the Cortex-A7 PMU ...
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28ARM: move CP15 definitions to separate header fileRussell King
Avoid namespace conflicts with drivers over the CP15 definitions by moving CP15 related prototypes and definitions to a private header file. Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> [Tegra] Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> [EP93xx] Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-27Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: device tree work" from Arnd Bergmann: "Most of these patches convert code from using static platform data to describing the hardware in the device tree. This is only the first half of the changes for v3.4 because a lot of patches for this topic came in the last week before the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h} * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board ARM: OMAP2+: Remove extra ifdefs for board-generic ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected ASoC: DT: Add digital microphone binding to PAZ00 board. ARM: dt: Add ARM PMU to tegra*.dtsi ARM: at91: at91sam9x5cm/dt: add leds support ARM: at91: usb_a9g20/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add leds support ARM: at91: usb_a9g20/dt: add leds support ARM: at91/pio: add new PIO3 features ARM: at91: add sam9_smc.o to at91sam9x5 build ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter ARM: at91/tc: add device tree support to atmel_tclib ...
2012-03-27Merge branch 'devel-stable' into for-linusRussell King
Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-24ARM: Versatile Express: add NO_IOPORTRussell King
On Versatile Express, the PCI Express buses are broken and unusable, so we aren't going to support PCI/ISA IO cycles on this platform. Remove the PCI/ISA IO inb et.al. support for this platform. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-24ARM: move CP15 definitions to separate header fileRussell King
Avoid namespace conflicts with drivers over the CP15 definitions by moving CP15 related prototypes and definitions to a private header file. Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> [Tegra] Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> [EP93xx] Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-21Merge branch 'tegra/cleanups' into next/timerArnd Bergmann
Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-vexpress/core.h The tegra Makefile was changed in four different branches in the same line. This merge should reduce the amount of churn. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-20Merge branch 'renesas/timer' into next/timerArnd Bergmann
Conflicts: arch/arm/mach-shmobile/timer.c This resolves a nonobvious merge conflict between renesas timer changes in the global timer changes with those from the renesas soc branch and last minute bug fixes that went into v3.3. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-13ARM: plat-versatile: convert to twd_local_timer_register() interfaceMarc Zyngier
Add support for the new smp_twd runtime registration interface to the RealView/VE platforms, and remove the old compile-time support. Tested on EB11MP. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-07ARM: remove bunch of now unused mach/io.h filesRob Herring
Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-27ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selectionWill Deacon
Commit fa0ce403 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds") introduced a consistent naming scheme for errata workarounds, but forgot to update the platforms selecting workarounds using the old names. This patch updates ux500 and vexpress to select the appropriate PL310 errata workarounds. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-24Merge branch 'vexpress-dt-v3.3-rc4' of ↵Arnd Bergmann
git://git.linaro.org/people/pawelmoll/linux into next/dt * 'vexpress-dt-v3.3-rc4' of git://git.linaro.org/people/pawelmoll/linux: (573 commits) ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant) ARM: vexpress: Add Device Tree for V2P-CA9 core tile ARM: vexpress: Add Device Tree for V2P-CA5s core tile ARM: vexpress: Motherboard RS1 memory map support ARM: vexpress: Add Device Tree support ARM: vexpress: Use FDT data in platform SMP calls ARM: versatile: Map local timers using Device Tree when possible ARM: vexpress: Get rid of MMIO_P2V This adds full device tree boot support for the versatile express platform, as has been awaited for a long time. Conflicts: arch/arm/mach-vexpress/core.h The definition of AMBA_DEVICE was removed in one branch, and the definition of MMIO_P2V was removed in the other branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-24ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant)Pawel Moll
This patch adds Device Tree file for the CoreTile Express A15x2 (V2P-CA15) with Test Chip 1. As the chip's GIC has 160 interrupt inputs and equivalent SMM (FPGA) has GIC synthesised with 256 interrupts, NR_IRQS is increased. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Add Device Tree for V2P-CA9 core tilePawel Moll
This patch adds Device Tree file for the CoreTile Express A9x4 (V2P-CA9). Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Add Device Tree for V2P-CA5s core tilePawel Moll
This patch adds Device Tree file for the CoreTile Express A5x2 (V2P-CA5s). Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Motherboard RS1 memory map supportPawel Moll
This patch adds support for RS1 memory map based Versatile Express motherboard. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Add Device Tree supportPawel Moll
This patch adds generic Versatile Express DT machine description, Device Tree description for the motherboard and documentation for the bindings. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-24ARM: vexpress: Use FDT data in platform SMP callsPawel Moll
Scan flatten device looking for A5/A9 SCU node and initialize it using base address in "reg" property. If nothing is found, assume that there is no special SCU initialization required and initialize CPUs basing on numbers of "cpu" type devices in "cpus" node of the Device Tree. All this happens only if the board was booted with FDT, otherwise ct_desc callbacks are used. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-23ARM: vexpress: Get rid of MMIO_P2VPawel Moll
This patch gets rid of the MMIO_P2V and __MMIO_P2V macros, defining constant virtual base for motherboard and tile peripherals instead. Additionally, in preparation for the new motherboard memory map, the motherboard peripherals are using base pointers calculated in runtime, instead of compile-time calculated values. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-02-22Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux ↵Russell King
into for-armsoc