summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap
AgeCommit message (Collapse)Author
2009-03-04ARM: OMAP: Allow I2C bus driver to be compiled as a moduleAaro Koskinen
Fixes a linker error when OMAP I2C bus driver is compiled as a module: ERROR: "i2c_register_board_info" [arch/arm/plat-omap/i2c.ko] undefined! The I2C utility functions used for board initialization should be always built-in. Signed-off-by: Aaro Koskinen <Aaro.Koskinen@nokia.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-04ARM: OMAP: sched_clock() correctedAaro Koskinen
After my OMAP3 board has been running for a while, I'm seeing weird latency traces like this: sh-1574 0d.h2 153us : do_timer (tick_do_update_jiffies64) sh-1574 0d.h2 153us : update_wall_time (do_timer) sh-1574 0d.h2 153us!: omap_32k_read (update_wall_time) sh-1574 0d.h2 1883us : update_xtime_cache (update_wall_time) sh-1574 0d.h2 1883us : clocksource_get_next (update_wall_time) sh-1574 0d.h2 1883us+: _spin_lock_irqsave (clocksource_get_next) and after a while: sh-17818 0d.h3 153us : do_timer (tick_do_update_jiffies64) sh-17818 0d.h3 153us : update_wall_time (do_timer) sh-17818 0d.h3 153us!: omap_32k_read (update_wall_time) sh-17818 0d.h3 1915us : update_xtime_cache (update_wall_time) sh-17818 0d.h3 1915us+: clocksource_get_next (update_wall_time) sh-17818 0d.h3 1945us : _spin_lock_irqsave (clocksource_get_next) Turns out that sched_clock() is using cyc2ns(), which returns NTP adjusted time. The sched_clock() frequency should not be adjusted. The patch deletes omap_32k_ticks_to_nsecs() and rewrites sched_clock() to do the conversion using the constant multiplier. Signed-off-by: Aaro Koskinen <Aaro.Koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-04ARM: OMAP: Fix compile error if pm.h is includedDavid Brownell
Change the error to a warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-29ARM: OMAP: Fix hsmmc init, v2Tony Lindgren
The naming accidentally broke while changing the name for the driver to not to conflict with the other mmc driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-29ARM: OMAP: Fix omap34xx revision detection for ES3.1Tony Lindgren
Fix omap34xx revision detection for ES3.1 Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-29ARM: OMAP: DMA: Fix uninitialized channel flagsJarkko Nikula
This has similar symptoms than 66c23551b1b774e2be3c7bdf91c0ebf2c7a3519e where just omap_request_dma, omap_dma_link_lch and omap_dma_unlink_lch can cause incorrect dump_stack(). Here it can happen if channel has been used before and the channel flags variable holds old status. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-29ARM: OMAP: Fix race in OMAP2/3 DMA IRQ handlingJuha Yrjola
CSR must be cleared before invoking the callback. If the callback function starts a new, fast DMA transfer on the same channel, the completion status might lost if CSR is cleared after the callback invocation. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-29ARM: OMAP: Fix McBSP spin_lock deadlockStanley.Miao
A spin_lock deadlock will occur when omap_mcbsp_request() is invoked. omap_mcbsp_request() \- clk_enable(mcbsp->clk) [takes and holds clockfw_lock] \- omap2_clk_enable() \- _omap2_clk_enable() \- omap_mcbsp_clk_enable() \- clk_enable(child clock) [tries for clockfw_lock again] mcbsp_clk is a virtual clock and it comprises several child clocks. when enable mcbsp_clk in omap_mcbsp_request(), the enable function of mcbsp_clk will enable its child clocks, then the deadlock occurs. The solution is to remove the virtual clock and enable these child clocks in omap_mcbsp_request() directly. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-24[ARM] omap: usb: thou shalt not provide empty release functionsRussell King
... for devices. Doing so is a bug, plain and simple, and drives GregKH round the bend. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-15ARM: OMAP: Fix compile for h3 MMCTony Lindgren
Fix compile for h3 MMC Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15ARM: OMAP: Remove unused platform devices, v3Tony Lindgren
This patch removes old platform devices. Alsa should now be using the ASoC driver. For boards not yet using ASoC, please see sound/soc/omap/osk5912.c. Add dummy aic23_power_up and aic23_power_down functions for 770 to keep things compiling. Remove references to omap_gpio_switch, and unused h2_nand_dev_ready function. This patch is based on an earlier patch by Arun KS. Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15ARM: OMAP: Fix ASoC by enabling writes to XCCR and RCCR McBSP registers, v3Tony Lindgren
This patch enables writing to McBSP Transmit Configuration Control Register (XCCR) and Receive Configuration Control Register (RCCR) for 2430/34xx platforms. It also adds XCCR, RCCR entries in McBSP register configuration structure and bit definitions for both registers. If we enable the writing to CCR registers for 2430/34xx and don't set the default values (setting 0 as a consequence) in ASoC driver, the Transmit/Receive DMA mode gets disabled and the the transmission/reception doesn't happen, ending with a "write error: Input/Output error" when playing with 'aplay'. Also define dummy CCR registers for omap1. Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15ARM: OMAP: Fix DMA CCR programming for request line > 63, v3Anand Gadiyar
Bug in existing code causes synchro control to be set +32 if request line greater than 63 is used. Also clean up the function a bit by removing extra parens and clearing the bits at before write. Reported by Wenbiao Wang. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15ARM: OMAP: Fix gpio.c compile on 15xx with CONFIG_DEBUGFSTony Lindgren
There are no wakeup registers on 15xx, and suspend_wakeup does not exist in the struct gpio_bank. Without this fix we'll get "arch/arm/plat-omap/gpio.c:1792: error: 'struct gpio_bank' has no member named 'suspend_wakeup'" as noted by Russell King. Note that the ifdefs will be cleaned up once the omap gpio code gets split into omap1 and omap2 specific parts. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15ARM: OMAP: Fix gpio by switching to generic gpio calls, v2Jarkko Nikula
Fix compile by removing remaining omap specific gpio calls. Based on earlier patches by Jarkko Nikula. Also remove old GPIO key code, there is already a patch to do this with gpio_keys. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-08[ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, ↵Russell King
pxa, s3c arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB' arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function) arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function) arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction' arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function) arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function) ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-07USB: otg: sharable otg transceiver opsTony Lindgren
Move otg_get/set/put_transceiver() from omap specific code to common otg.c so other upcoming drivers can share them. [ dbrownell@users.sourceforge.net: move to drivers/usb/otg, dox ] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: otg: add otg_put_transceiver()Philipp Zabel
As Russell King points out, calling put_device(otg_transceiver->dev) directly in driver cleanup paths makes assumptions about otg_transceiver internals. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06arm: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17Merge branch 'hsmmc-init' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-15Merge branch 'omap3-upstream' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-11omap mmc: Add low-level initialization for hsmmc controllerTony Lindgren
Add low-level initialization for hsmmc controller. Merged into this patch patch are various improvments and board support by Grazvydas Ignotas and David Brownell. Also change wire4 to be wires, as some newer controllers support 8 data lines. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11omap mmc: Add better MMC low-level initTony Lindgren
This will simplify the MMC low-level init, and make it more flexible to add support for a newer MMC controller in the following patches. The patch rearranges platform data and gets rid of slot vs controller confusion in the old data structures. Also fix device id numbering in the clock code. Some code snippets are based on an earlier patch by Russell King <linux@arm.linux.org.uk>. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP3: Pin multiplexing updates for 24xx and 34xxArun KS
This patch adds some new pin multiplexing options for McBSP and McSPI from Arun KS. Also add two more GPIOs from David Brownell. Also mark omap24xx_cfg_reg() static. Signed-off-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP3: DMA: Fix for sDMA Errata 1.113Santosh Shilimkar
SDMA channel is not disabled after transaction error. So explicitly disable it. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked By : Nishant kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP3: LDP: Add Ethernet device support to make ldp boot succeessStanley.Miao
Add Ethernet device support in board-ldp.c to make ldp can boot and mount nfs successfully. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
2008-12-11ARM: OMAP3: Add OMAP34xx pin multiplexing into I2C bus registration helperJarkko Nikula
- Simplify function omap_i2c_mux_pins - Add OMAP34xx pin multiplexing for busses 1 - 3 Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP2: skip unnecessary TLDR write during non-autoreload for gptimerPaul Walmsley
The GPTIMER TLDR register does not need to be written if the GPTIMER is not in autoreload mode. This is the usual case for dynamic tick-enabled kernels. Simulation data indicate that skipping the read that occurs as part of the write should save at least 300-320 ns for each GPTIMER1 timer reprogram. (This assumes L4-Wakeup is at 19MHz and GPTIMER write posting is enabled.) Skipping the write itself probably won't have much impact since it should be posted on the OCP interconnect. Tested on 2430SDP and 3430SDP. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP2: drop redundant pending write check for gptimerPaul Walmsley
omap_dm_timer_write_reg() already waits for pending writes to complete, so the extra wait in omap_dm_timer_set_load() is superfluous. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP2: Use omap_rev() instead of system_revLauri Leukkunen
system_rev is meant for board revision, this patch changes all relevant instances to use the new omap_rev() function liberating system_rev to be used with ATAG_REVISION as it has been designed. Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP2: Fix cpu detectionTony Lindgren
At some point omap2 changed the bits for GET_OMAP_CLASS, which broke 15xx detection on 730 as noticed by Russell King. This patch fixes omap2 cpu detection to respect the original GET_OMAP_CLASS, and simplifies the detection for 34xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP: Switch to gpio_request/free callsJarkko Nikula
Switch to gpio_request/free calls Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP: minor gpio bugfixesDavid Brownell
Minor GPIO fixes: - If get_gpio_bank() fails, then BUG() out. - In omap_set_gpio_debounce(): * protect the read/modify/write with the relevant spinlock * make the omap3 clock ops pass "sparse" checking Except for the spinlock problem, these were reported through "make". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP: make legacy gpio request/free calls superfluousJarkko Nikula
Clean up OMAP GPIO request/free functions - Rename and declare static OMAP specific GPIO request/free functions - Register them into gpiolib as chip-specific hooks - Add omap_request_gpio/omap_free_gpio wrappers for existing code not converted yet to use gpiolib Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> [ dbrownell@users.sourceforge.net: remove needless check_gpio() calls ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP: use gpio_to_irqDavid Brownell
Have most uses of OMAP_GPIO_IRQ() use gpio_to_irq() instead. Calls used for table initialization are left alone, at least this time around. (This patch is for code in both the OMAP tree and mainline.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP: switch to gpio_direction_outputDavid Brownell
More conversion to the standard GPIO interfaces: stop using omap_set_gpio_direction() entirely, and switch over to the gpio_direction_output() call. Note that because gpio_direction_output() includes the initial value, this change isn't quite transparent. - For the call sites which defined an initial value either before or after setting the direction, that value was used. When that value was previously assigned afterwards, this could eliminate a brief output glitch ... and possibly change behavior. In a few cases (LCDs) several values were assigned together ... those were re-arranged to match the explicit sequence provided. - Some call sites didn't define such a value; so I chose an initial "off/reset" value that seemed to default to "off". In short, files touched by this patch might notice some small changes in startup behavior (with trivial fixes). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP: switch to gpio_direction_inputDavid Brownell
More switchover to the cross-platform GPIO interface: use gpio_direction_input(), not an OMAP-specific call. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP: switch to standard gpio get/set callsDavid Brownell
This patch replaces some legacy OMAP GPIO calls with the "new" (not really, any more!) calls that work on most platforms. The calls addressed by this patch are the simple ones to get and set values ... for code that's in mainline, including the implementations of those calls. Except for the declarations and definitions of those calls, all of these changes were performed by a simple SED script. Plus, a few "if() set() else set()" branches were merged by hand. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP: gpios implement new to_irq()David Brownell
Make OMAP use the new __gpio_to_irq() hook, to make it easier to support IRQs coming in from off-chip gpio controllers like the TWL4030/TPS65930 chip used on OMAP3 boads like Beagleboard.org and the Gumstix Overo. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP: Extend gpio label column width in omap_gpio debugfs fileJarkko Nikula
There are already various drivers having bigger label than 10 bytes. Most of them fit well under 20 bytes but make column width exact so that oversized labels don't mess up output alignment. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-11ARM: OMAP: Enable GPIO debounce clock only when debounce is enabled v3Jouni Hogander
This patch changes gpio "driver" to enable debounce clock for gpio-bank only when debounce is enabled for some gpio in that bank. Gpio functional clocks are also renamed in clock tree, gpioX_fck -> gpioX_dbck. This patch triggers problem with gpio wake-up and Omap3. Gpios in PER domain aren't capable to generate wake-up if PER domain is in sleep state. For this iopad wake-up should be used and needed pad configuration should be done. Enabling iopad wake-up for gpio pads is left for bootloader or omap mux configuration in kernel. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-01[ARM] omap: fix a pile of issuesRussell King
This patch fixes a number of sillies, from missing 'const' to using 'return' in void functions, to functions with no arguments not even 'void' and a cast which isn't required. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-30[ARM] Add a common typesafe __io implementationRussell King
As Al did for Versatile in 2ad4f86b60b649fd7428265c08d73a3bd360c81b, add a typesafe __io implementation for platforms to use. Convert platforms to use this new simple typesafe implementation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] Hide ISA DMA API when ISA_DMA_API is unsetRussell King
When ISA_DMA_API is unset, we're not implementing the ISA DMA API, so there's no point in publishing the prototypes via asm/dma.h, nor including the machine dependent parts of that API. This allows us to remove a lot of mach/dma.h files which don't contain any useful code. Unfortunately though, some platforms put their own private non-ISA definitions into mach/dma.h, so we leave these behind and fix the appropriate #include statments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28Merge branch 'highmem' into develRussell King
Conflicts: arch/arm/mach-clps7500/include/mach/memory.h
2008-11-28[ARM] remove a common set of __virt_to_bus definitionsNicolas Pitre
Let's provide an overridable default instead of having every machine class define __virt_to_bus and __bus_to_virt to the same thing. What most platforms are using is bus_addr == phys_addr so such is the default. One exception is ebsa110 which has no DMA what so ever, so the actual definition is not important except only for proper compilation. Also added a comment about the special footbridge bus translation. Let's also remove comments alluding to set_dma_addr which is not (and should not) be commonly used. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27[ARM] Arrange for platforms to select appropriate CPU supportRussell King
Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-26ARM: OMAP: Fixes for suspend / resume GPIO wake-up handlingTero Kristo
Use the correct wake-up enable register, and make it work with 34xx also. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-25ARM: OMAP: Typo fix for clock_allow_idleAmit Kucheria
The second clk_deny_idle instance should be clk_allow_idle instead. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix define for twl4030 irqsTony Lindgren
Otherwise twl4030 gpios won't work. Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v0.10.2 at 2024-11-20 00:13:56 (GMT)