summaryrefslogtreecommitdiff
path: root/arch/blackfin/Kconfig
AgeCommit message (Collapse)Author
2008-04-23[Blackfin] arch: MEM_ADD_WIDTH only gets used when reprogramming clocks, so ↵Mike Frysinger
dont bother exposing it in the menu normally Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-29[Blackfin] arch: initial generic time and clock sourcesVitja Makarov
This patch enables Hight-Res Timers and tickless kernel Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-17Generic semaphore implementationMatthew Wilcox
Semaphores are no longer performance-critical, so a generic C implementation is better for maintainability, debuggability and extensibility. Thanks to Peter Zijlstra for fixing the lockdep warning. Thanks to Harvey Harrison for pointing out that the unlikely() was unnecessary. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-02-09ide: introduce HAVE_IDESam Ravnborg
To allow flexible configuration of IDE introduce HAVE_IDE. All archs except arm, um and s390 unconditionally select it. For arm the actual configuration determine if IDE is supported. This is a step towards introducing drivers/Kconfig for arm. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-08[Blackfin] arch: hook up set_irq_wake in Blackfin's irq codeMichael Hennerich
- Add support for irq_wake on system and gpio interrupts - Remove outdated kernel options - Add option to select default PM mode - Fix various places where SIC_IWRx was only handled partially Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-03Move Kconfig.instrumentation to arch/Kconfig and init/KconfigMathieu Desnoyers
Move the instrumentation Kconfig to arch/Kconfig for architecture dependent options - oprofile - kprobes and init/Kconfig for architecture independent options - profiling - markers Remove the "Instrumentation Support" menu. Everything moves to "General setup". Delete the kernel/Kconfig.instrumentation file. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03Add HAVE_OPROFILEMathieu Desnoyers
Linus: On the per-architecture side, I do think it would be better to *not* have internal architecture knowledge in a generic file, and as such a line like depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32 really shouldn't exist in a file like kernel/Kconfig.instrumentation. It would be much better to do depends on ARCH_SUPPORTS_KPROBES in that generic file, and then architectures that do support it would just have a bool ARCH_SUPPORTS_KPROBES default y in *their* architecture files. That would seem to be much more logical, and is readable both for arch maintainers *and* for people who have no clue - and don't care - about which architecture is supposed to support which interface... Changelog: Actually, I know I gave this as the magic incantation, but now that I see it, I realize that I should have told you to just use config ARCH_SUPPORTS_KPROBES def_bool y instead, which is a bit denser. We seem to use both kinds of syntax for these things, but this is really what "def_bool" is there for... Changelog : - Moving to HAVE_*. - Add AVR32 oprofile. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-01Suspend: Clean up Kconfig (V2)Johannes Berg
This cleans up the suspend Kconfig and removes the need to declare centrally which architectures support suspend. All architectures that currently support suspend are modified accordingly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-24[Blackfin] arch: use common flash driver to setup partitions rather than the ↵Mike Frysinger
bf5xx-flash driver Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-22[Blackfin] arch: Fix bug Only RTC interrupt can wake up deeper sleep core.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Initial checkin of the memory protection support.Bernd Schmidt
Enable it with CONFIG_MPU. Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: Restore default DMA priority over core on bf54x.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: add support for BF523/BF524/BF526Mike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: scrub dead alive/idle LED codeMike Frysinger
if it does get re-added, it needs to be in the boards directory, not common code ... or it needs a re-implementation Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Fix bug to Enable bf548 to Re-program Clocks while Kernel ↵Sonic Zhang
boots. Reprogram DDR EBIU register properly for bf548. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-23[Blackfin] arch: Fix bug to Enable kernel to build for bf548 with PM.Sonic Zhang
On BF548-EZKIT, build kernel faills with power management, video and audio enabled. This patch fix this. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-15Fix Blackfin HARDWARE_PM supportMathieu Desnoyers
This patch restores the blackfin Hardware Performance Monitor Profiling support that was killed by the combining of instrumentation menus in commit 09cadedbdc01f1a4bea1f427d4fb4642eaa19da9. Since there seems to be no good reason to behave differently from other architectures, it now automatically selects the hardware performance counters whenever the profiling is activated. mach-common/irqpanic.c: pm_overflow calls pm_overflow_handler which is in oprofile/op_model_bf533.c. I doubt that setting HARDWARE_PM as "m" will work at all, since the pm_overflow_handler should be in the core kernel image because it is called by irqpanic.c. Therefore, I change HARDWARE_PM from a tristate to a bool. The whole arch/$(ARCH)/oprofile/ is built depending on CONFIG_OPROFILE. Since part of the HARDWARE_PM support files sits in this directory, it makes sense to also depend on OPROFILE, not only PROFILING. Since OPROFILE already depends on PROFILING, it is correct to only depend on OPROFILE only. Thanks to Adrian Bunk for finding this bug and providing an initial patch. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Adrian Bunk <adrian.bunk@movial.fi> CC: Randy Dunlap <randy.dunlap@oracle.com> CC: bryan.wu@analog.com Acked-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-21Blackfin arch: Update Kconfig to latest Blackfin silicon datasheetsRobin Getz
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: fix bug NOR Flash MTD mount failSonic Zhang
Config EBIU flash mode properly. EBIU_MODE EBIU_FCTL EBIU_MBSCTL register should be configurd to Flash mode. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: remove useless CONFIG_IRQCHIP_DEMUX_GPIOMike Frysinger
since we have this always turned on now and dont want it off (and hasnt been an option in a while) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: add BF547 to list of accepted procsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: split debug stuff off into Kconfig.debug like everyone elseMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-23Blackfin arch: punt CONFIG_BFIN -- we already have CONFIG_BLACKFINMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: fix indentation -- use tabs, not spacesMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: split board selection off into mach subdirsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: fix silicon rev display and selection for BF52x/BF54xMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: remove mention of uClinux/no-mmu ... we are just Blackfin LinuxMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29Blackfin arch: Added support for HV Sistemas H8606 boardJavier Herrero
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: cleanup and promote the general purpose timers api to a core ↵Mike Frysinger
blackfin component Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: add new processor ADSP-BF52x arch/mach supportMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-19typo fixesMatt LaPlante
Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Combine instrumentation menus in kernel/Kconfig.instrumentationMathieu Desnoyers
Quoting Randy: "It seems sad that this patch sources Kconfig.marker, a 7-line file, 20-something times. Yes, you (we) don't want to put those 7 lines into 20-something different files, so sourcing is the right thing. However, what you did for avr32 seems more on the right track to me: make _one_ Instrumentation support menu that includes PROFILING, OPROFILE, KPROBES, and MARKERS and then use (source) that in all of the arches." Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"Adrian Bunk
Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-10Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT and ↵Robin Getz
DEBUG_KERNEL_START Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work that well, and DEBUG_KERNEL_START was just implmented poorly. Will replace with a new checkin. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: fix typo in register nameMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: Initial patch to add earlyprintk supportRobin Getz
This allows debugging of problems which happen eary in the kernel boot process (after bootargs are parsed, but before serial subsystem is fully initialized) Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: allow people to select the feature that is unavailable to the ↵Mike Frysinger
kernel - allow people to select the feature that is unavailable to the kernel: NMI, JTAG, or CYCLES. - change default NMI handler to simply dump hardware trace buffer. - remove default NMI handler completely as calling into kernel code is not safe move example handler to wiki so people dont haphazardly copy and paste this stuff thinking its safe Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: update BOOT_LOADMike Frysinger
update BOOT_LOAD help to reflect current state of the first 4k of our address space as well as add a memory range option to prevent invalid values Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: to do some consolidation of common code and common name spacesRobin Getz
now all BLKFIN should be BFIN, should be no functional changes. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25Blackfin arch: Add ability to expend the hardware trace bufferRobin Getz
Add ability to expend the hardware trace buffer via a configurable software buffer - so you can have lots of history when a crash occurs. The interesting way we do printk in the traps.c confusese the checking script Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03Blackfin arch: Fix CCLK and SCLK checksRobin Getz
Fix CCLK and SCLK checks, combine all arch checks into one file for maintance. Checkins that remove more lines than they add are always good. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24Blackfin arch: Advertise GENERIC_GPIO and remove duplicated ↵Michael Hennerich
GENERIC_CALIBRATE_DELAY Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12Blackfin arch: add missing CONFIG_LARGE_ALLOCS when upstream mergingBryan Wu
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12Blackfin arch: Disable CACHELINE_ALIGNED_L1 for BF54x by defaultMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12Blackfin arch: There is no CDPRIO Bit in the EBIU_AMGCTL Register of BF54x archMichael Hennerich
However there are similar things in the EBIU_DDRQUE Register Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12Blackfin arch: Enable BF54x PIN/GPIO interruptsMichael Hennerich
Signed-off-bu: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12Blackfin arch: initial supporting for BF548-EZKITRoy Huang
The ADSP-BF54x was specifically designed to meet the needs of convergent multimedia applications where system performance and cost are essential ingredients. The integration of multimedia, human interface, and connectivity peripherals combined with increased system bandwidth and on-chip memory provides customers a platform to design the most demanding applications. Since now, ADSP-BF54x will be supported in the Linux kernel and bunch of related drivers such as USB OTG, ATAPI, NAND flash controller, LCD framebuffer, sound, touch screen will be submitted later. Please enjoy the show. Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-25Blackfin arch: Add proper -mcpu option according to the cpu and silicon ↵Jie Zhang
revision configuration Add silicon revision "any" and "none". Add proper -mcpu option according to the cpu and silicon revision configuration. Need update to use latest Blackfin cross compile toolchain. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: scrub old console definesMike Frysinger
since they arent respected anymore (use console=) and just confuse people Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-05-21Blackfin arch: initial tepla-bf561 board supportMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v0.10.2 at 2024-11-09 13:43:15 (GMT)