summaryrefslogtreecommitdiff
path: root/arch/ia64/sn
AgeCommit message (Collapse)Author
2008-01-25sched: remove printk_clock references from ia64Ingo Molnar
remove remaining printk_clock references from ia64. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-03[IA64] Update Altix nofault codeRuss Anderson
Montecito and Montvale behaves slightly differently than previous Itanium processors, resulting in the MCA due to a failed PIO read to sometimes surfacing outside the nofault code. This code is based on discussions with Intel CPU architects and verified at customer sites. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-19[IA64] Fix Altix BTE error return statusRuss Anderson
The Altix shub2 BTE error detail bits are in a different location than on shub1. The current code does not take this into account resulting in all shub2 BTE failures mapping to "unknown". This patch reads the error detail bits from the proper location, so the correct BTE failure reason is returned for both shub1 and shub2. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-19[IA64] Two trivial spelling fixesJoe Perches
s/addres/address/ s/performanc/performance/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-08[IA64] Add missing "space" to concatenated stringsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-12-08[IA64] SGI Altix : fix bug in sn_io_late_init()Mike Habeck
When initializing pci_controller->node to point to the closest node we need to take into consideration that a PIC PCI Bridge ASIC can be connected to a headless/memless node just like the TIOCP and TIOCE Bridge ASICs Signed-off-by: Mike Habeck <habeck@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-09[IA64] XPC heartbeat timer function must run on CPU 0Dean Nelson
Currently, XPC's heartbeat timer function runs on whatever CPU modprobe/insmod ran on when XPC was started. To avoid the heartbeat from being delayed for long periods the timer function must run on CPU 0. N.B. Altix doesn't currently allow cpu0 to be taken offline, so this is safe for now. This code must be revised when offline of cpu0 is enabled. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-06[IA64] Disable/re-enable CPE interrupts on AltixRuss Anderson
When the CPE handler encounters too many CPEs (such as a solid single bit memory error), it sets up a polling timer and disables the CPE interrupt (to avoid excessive overhead logging the stream of single bit errors). disable_irq_nosync() calls chip->disable() to provide a chipset specifiec interface for disabling the interrupt. This patch adds the Altix specific support to disable and re-enable the CPE interrupt. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-29[IA64] arch/ia64/sn/kernel/mca.c: undo lock when sn_oemdata can't be extendedRoel Kluin
Clean up locking state in failure path. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-10-22Update arch/ to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits) kbuild: introduce ccflags-y, asflags-y and ldflags-y kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP kbuild: enable use of AFLAGS and CFLAGS on commandline kbuild: enable 'make AFLAGS=...' to add additional options to AS kbuild: fix AFLAGS use in h8300 and m68knommu kbuild: check for wrong use of CFLAGS kbuild: enable 'make CFLAGS=...' to add additional options to CC kbuild: fix up CFLAGS usage kbuild: make modpost detect unterminated device id lists kbuild: call export_report from the Makefile kbuild: move Kai Germaschewski to CREDITS kconfig/menuconfig: distinguish between selected-by-another options and comments kconfig: tristate choices with mixed tristate and boolean values include/linux/Kbuild: remove duplicate entries kbuild: kill backward compatibility checks kbuild: kill EXTRA_ARFLAGS kbuild: fix documentation in makefiles.txt kbuild: call make once for all targets when O=.. is used kbuild: pass -g to assembler under CONFIG_DEBUG_INFO kbuild: update _shipped files for kconfig syntax cleanup ... Fix up conflicts in arch/um/sys-{x86_64,i386}/Makefile manually.
2007-10-16IA64: sg chaining supportJens Axboe
This updates the ia64 iommu/pci dma mappers to sg chaining. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12ia64: fix sn to add include files using EXTRA_CFLAGSSam Ravnborg
Changing the global CPPFLAGS is not the recommended way to add additional include dirs. Changed to use EXTRA_CFLAGS. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jes Sorensen <jes@sgi.com>
2007-09-01[IA64] SN: Add support for CPU disableJohn Keller
Add additional support for CPU disable on SN platforms. Correctly setup the smp_affinity mask for I/O error IRQs. Restrict the use of the feature to Altix 4000 and 450 systems running with a CPU disable capable PROM, and do not allow disabling of CPU 0. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-09-01[IA64] Remove unnecessary cast of allocation return value in ↵Jesper Juhl
sn_hwperf_enum_objects() vmalloc() returns a void pointer - no need to cast it. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-13[IA64] SGI Altix : fix a force_interrupt bug on altixMike Habeck
If the interrupt has been disabled, don't call the force_interrupt provider. Doing so can result in an infinite runaway interrupt loop. Signed-off-by: Mike Habeck <habeck@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-13[IA64] SN2 needs platform specific irq_to_vector() function.Kenji Kaneshige
Add base support for implementing platform_irq_to_vector(), and then use it on SN2. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: John Keller <jpk@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-01[IA64] SN2: Fix up sn2_rtc clockChristoph Lameter
If the sn2_rtc clock is present then it is a must have since sn2_rtc provides a synchronized time source on Altix systems. So elevate the priority to 450. Otherwise the ITC would take precendence. Altix systems currently do not boot because the ITC clocksource is broken. It seems to assume that ITCs are synchronized and as a result nanosleep hangs (may be fixed in a different patch). While we are at it: Remove the sn2_mc definition. The sn2_rtc has a fixed address. No point in reading the address from memory. Removing it avoids touching one cacheline. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-30[IA64] Remove a few duplicate includesJesper Juhl
This patch removes a few duplicate includes from arch/ia64/ Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-30[IA64] fix a few section mismatch warningsSam Ravnborg
Fix the following section mismatch warnings: WARNING: vmlinux.o(.text+0x41902): Section mismatch: reference to .init.text:__alloc_bootmem (between 'ia64_mca_cpu_init' and 'ia64_do_tlb_purge') WARNING: vmlinux.o(.text+0x49222): Section mismatch: reference to .init.text:__alloc_bootmem (between 'register_intr' and 'iosapic_register_intr') WARNING: vmlinux.o(.text+0x62beb2): Section mismatch: reference to .init.text:__alloc_bootmem_node (between 'hubdev_init_node' and 'cnodeid_get_geoid') Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-20[IA64] Convert to generic timekeeping/clocksourceTony Luck
This is a merge of Peter Keilty's initial patch (which was revived by Bob Picco) for this with Hidetoshi Seto's fixes and scaling improvements. Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-13[IA64] correctly count CPU objects in the ia64/sn hwperf interfaceMark Goodwin
Correctly count CPU objects for SGI ia64/sn hwperf interface Signed-off-by: Mark Goodwin <markgw@sgi.com> Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-11[IA64] silence GCC ia64 unused variable warningsJes Sorensen
Tell GCC to stop spewing out unnecessary warnings for unused variables passed to functions as pointers for ia64 files. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-09[IA64] SN: Correct ROM resource length for BIOS copyJohn Keller
On SN systems, when setting the IORESOURCE_ROM_BIOS_COPY resource flag, the resource length should be set to the actual size of the ROM image so that a call to pci_map_rom() returns the correct size. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-06-26[IA64] Make SN2 PCI code use ioremap rather than manually mangle the addressJes Sorensen
This one changes the SN2 specific PCI drivers to use ioremap() for obtaining the real address to access for the PCI registers instead of manually calculating them with __IA64_UNCACHED_OFFSET. The patch should have no real change when running on a normal Linux kernel, but when running as a paravirtualized it is needed. Signed-off-by: Jes Sorenson <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-06-26[IA64] Force error to surface in nofault codeRuss Anderson
Montecito behaves slightly differently than previous processors, resulting in the MCA due to a failed PIO read to sometimes surfacing outside the nofault code. Adding an additional or and stop bits ensures the MCA surfaces in the nofault code. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-18[IA64] Yet another section mismatch warningTony Luck
reference to .init.data: from .text between 'sn_cpu_init' (at offset 0x1411) and 'nasid_slice_to_cpuid' reference to .init.data: from .text between 'sn_cpu_init' (at offset 0x1420) and 'nasid_slice_to_cpuid' The offending .init.data object is shub_1_1_found which should be declared in __cpuinitdata, not in __initdata Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-11[IA64] spelling fixes: arch/ia64/Simon Arlott
Spelling and apostrophe fixes in arch/ia64/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-10[IA64] more warning cleanupsTony Luck
arch/ia64/sn/kernel/xpc_partition.c:578: warning: long unsigned int format, different type arg (arg 3) arch/ia64/sn/kernel/xpnet.c:349: warning: int format, different type arg (arg 7) arch/ia64/sn/kernel/xpnet.c:349: warning: int format, different type arg (arg 8) Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-10[IA64] Fix warnings resulting from type-checking in dev_dbg()Tony Luck
Lots of places where we passed a "struct pci_device *" rather than a "struct device *". One place where we used a "%s" in the format, but forgot to provide an argument. Acked-by: John Keller <jpk@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] wire up pselect, ppoll [IA64] Add TIF_RESTORE_SIGMASK [IA64] unwind did not work for processes born with CLONE_STOPPED [IA64] Optional method to purge the TLB on SN systems [IA64] SPIN_LOCK_UNLOCKED macro cleanup in arch/ia64 [IA64-SN2][KJ] mmtimer.c-kzalloc [IA64] fix stack alignment for ia32 signal handlers [IA64] - Altix: hotplug after intr redirect can crash system [IA64] save and restore cpus_allowed in cpu_idle_wait [IA64] Removal of percpu TR cleanup in kexec code [IA64] Fix some section mismatch errors
2007-05-08[IA64] Optional method to purge the TLB on SN systemsJack Steiner
This patch adds an optional method for purging the TLB on SN IA64 systems. The change should not affect any non-SN system. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-08move die notifier handling to common codeChristoph Hellwig
This patch moves the die notifier handling to common code. Previous various architectures had exactly the same code for it. Note that the new code is compiled unconditionally, this should be understood as an appel to the other architecture maintainer to implement support for it aswell (aka sprinkling a notify_die or two in the proper place) arm had a notifiy_die that did something totally different, I renamed it to arm_notify_die as part of the patch and made it static to the file it's declared and used at. avr32 used to pass slightly less information through this interface and I brought it into line with the other architectures. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix vmalloc_sync_all bustage] [bryan.wu@analog.com: fix vmalloc_sync_all in nommu] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08[IA64] - Altix: hotplug after intr redirect can crash systemJohn Keller
When redirecting a device interrupt on SN, not all links between platform specific structures are being updated. This can result in a system crash if an interrupt redirection is followed by an unplug of that device. The complete fix also requires a prom update. Though, this patch is backward compatable and not dependent on the prom patch. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-03MSI: arch must connect the irq and the msi_descMichael Ellerman
set_irq_msi() currently connects an irq_desc to an msi_desc. The archs call it at some point in their setup routine, and then the generic code sets up the reverse mapping from the msi_desc back to the irq. set_irq_msi() should do both connections, making it the one and only call required to connect an irq with it's MSI desc and vice versa. The arch code MUST call set_irq_msi(), and it must do so only once it's sure it's not going to fail the irq allocation. Given that there's no need for the arch to return the irq anymore, the return value from the arch setup routine just becomes 0 for success and anything else for failure. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-03PCI: Cleanup the includes of <linux/pci.h>Jean Delvare
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-26[SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-26[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-26[SK_BUFF]: Convert skb->end to sk_buff_data_tArnaldo Carvalho de Melo
Now to convert the last one, skb->data, that will allow many simplifications and removal of some of the offset helpers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-06[IA64] SGI Altix : fix pcibr_dmamap_ate32() bugMike Habeck
On a SGI Altix TIOCP based PCI bus we need to include the ATE_PIO attribute bit if we're mapping a 32bit MSI address. Signed-off-by: Mike Habeck <habeck@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-04-06[IA64] BTE error timer fixRuss Anderson
The bte recovery_timer was not being set correctly. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-20[IA64] Fix wrong /proc/iomem on SGI AltixBernhard Walle
In sn_io_slot_fixup(), the parent is re-set from the bus to io(port|mem)_resource because the address is changed in a way that it's not child of the bus any more. However, only the root is set but not the parent/child/sibling relationship in the resource tree which causes 'cat /proc/iomem' to stop after this memory area. Depding on the poition in the tree the iomem may be nearly completely empty. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: John Keller <jpk@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-20[IA64] Altix: ioremap vga_console_iobaseJohn Keller
When booting an SN system without specifing a console (i.e., no "console=" on boot line), the system will hang during boot at the point where /sbin/init is run. The problem is that vga_console_iobase is not converted to a virtual address before storing in io_space[0].mmio_base. The conversion was happening in sn_scan_pcdp(), but not in setup_vga_console(). Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-10Pull altix into release branchLen Brown
2007-03-07[IA64] fix NULL pointer in ia64/irq_chip-mask/unmask functionKAMEZAWA Hiroyuki
This patch fixes boot failure because irq_desc->mask() is NULL. - Added mask/unmask functions to ia64's irq desc function table. - rename hw_interrupt_type to irq_chip. hw_interrupt_type is old name. - Tony: Added same change to arch/ia64/sn/kernel/irq.c as pointed out by Eric Biederman ... mask/unmask functions there can be no-op. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-01ACPI: Altix: reinitialize acpi tablesJohn Keller
To provide compatibilty with SN kernels that do and do not have ACPI IO support, the SN PROM must build different versions of some ACPI tables based on which kernel is booting. As such, the tables may have to change at kernel boot time. By default, prior to kernel boot, the PROM builds an empty DSDT (header only) and no SSDTs. If an ACPI capable kernel boots, the kernel will notify the PROM, at platform setup time, and the PROM will build full DSDT and SSDT tables. With the latest changes to acpi_table_init(), the table lengths are saved, and when our PROM changes them, the changes are not seen, and the kernel will crash on boot. Because of issues with kexec support, we are not able to create the tables prior to acpi_table_init(). As a result, we are making a second call to acpi_table_init() to process the rebuilt DSDT and SSDTs. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Len Brown <len.brown@intel.com>